液氮冷冻刀温度检测与显示系统实现

针对液氮冷冻设备监测和控制的需要,以单片机STC12C5410AD为控制核心,采用K型热电偶传感器为测温元件,设计并实现了液氮冷冻刀的温度检测与显示系统。最后将液氮冷冻刀刀头放入不同温度的介质中,对系统进行了验证,结果表明:系统测得的温度值与红外测温仪测得的温度值基本吻合,满足冷冻设备要求,具有一定的临床应用价值。     

液氮喷淋流态化速冻系统及冷冻性能研究

液氮喷淋流态化速冻新系统是以液氮为冷源,结合液氮喷淋预冻和流态化速冻两种冻结方法于一体的食品速冻装置。本文建立了基于新系统的食品冷冻过程的焓法数学模型,计算了黄瓜片在不同冻结条件下的降温过程和冷冻时间,同时对冻品质量进行了分析。     

基于液氮低温冷刀系统的冻结组织温度场分布研究

设计了基于液氮的低温冷冻治疗系统,并进行动物组织实验研究,得到组织关键测温点的温度变化;并对冷冻过程进行数值模拟,将实验结果与模拟冷冻结果进行对比,根据二者的差异对数值模拟中采用的组织热物性参数进行修正,使模拟结果更接近于实际冷冻过程.     

液氮温区下光纤布拉格光栅应变传感器测量性能的研究

基于光纤布拉格光栅传感器的原理,研究了在液氮浸泡情况下光纤布拉格光栅应变传感器的静态传输特性.实验过程中利用悬臂梁原理和美国Micron Optics公司生产的光栅波长可调谐激光扫描法解调系统,分别测量了液氮浸泡中的悬臂梁的正应变和负应变,确定了在液氮温度下悬臂梁应变与光纤光栅波长偏移量之间的关系.为测量高温超导磁体的应变提供了新的方法.     

基于薄液膜蒸发的超高速冷冻方法初探

玻璃化冷冻方法是细胞超低温保存的有效冷冻方法之一.在细胞的玻璃化冷冻过程中,降温速率的提高有利于细胞内外溶液玻璃化程度的增加,同时可以降低低温保护剂的浓度,进而减少低温保护剂对细胞的毒性损伤和渗透性损伤.本文尝试将薄液膜蒸发这种高效相变传热方式与液氮的低温冷却过程相结合,发展了一种超高速、超低温冷冻降温方法.初步的实验结果表明:冷冻载体从10℃降到-180℃,其平均冷却速率达到了148052℃/min。     

35kV/90MVA高温超导限流器低温系统

35kV/90MVA高温超导限流器的低温系统是一个开放式的液氮制冷系统,包括一个环形不锈钢杜瓦、真空绝热管、压力及温度传感器、低温阀门以及监控系统.高温超导磁体放置在杜瓦中;监控系统检测杜瓦内液氮的液面,并控制往杜瓦内进行补液.杜瓦内蒸发的氮气通过真空绝热管道直接排放到大气中.分别对不同工况下的液氮蒸发量进行了测量.进...     

面向超导钉扎磁浮的液氮液位检测方法研究现状

高温超导钉扎磁浮制式以悬浮导向一体化、自稳定、无需控制等优势得到了越来越多的关注.与其他磁浮制式不同,高温超导钉扎磁浮制式采用块状高温超导材料作为车载悬浮体,需要低温液体液氮作为悬浮单元的制冷剂,冷却方式为浴冷,因此实时监测液氮液面,保证液面平稳是未来超导钉扎磁浮车运行维护的首要需求.本文从车载高温超导YBaCuO块材所需的液氮环境及其配套的液氮容器功能和结构出发,结合我们近期的基于卡尔曼滤波(Kalman filtering,KF)滤波算法的铂电阻传感器液氮液位计研究工作,对6种低温液位检测方法的基础原理、特征及检测精度的对比分析,总结示出包括铂电阻阵列方式在内的3种适用于超导钉扎磁浮列车在线检测系统的液氮液位检测方法,用于推进我国2021年1月13日正式启用的高温超导钉扎高速磁浮工程化样车应用发展.     

一种用于CD高温超导电缆的过冷液氮低温系统

介绍了安徽万瑞冷电科技有限公司研制的首条冷绝缘(CD)型10m/35kV/2kA高温超导电缆过冷液氮低温系统。系统主要由泵箱、冷箱、输液管道、液氮储槽及监控系统组成。该系统由G-M制冷机提供冷量,低温液氮泵提供循环动力,过冷液氮为闭循环介质。给出了过冷液氮低温系统调试运行结果。     

爆发沸腾形核分子动力学模拟

采用分子动力学模拟方法研究了液氮和水爆发沸腾中均相形核能量转换过程,通过计算系统势能变化分析了热流量和高能分子团尺寸对形核过程能量转换的影响,并分析了水和液氮爆发沸腾形核区别.结果表明,热流量与高能分子团半径的增加都会使系统中的势能转化增加.在模拟后期,水的势能转化趋于平稳,液氮势能转化逐渐升高,这与液氮与水分子之间的相互作用有关.     

过冷液氮冷却系统应用研究

介绍了过冷液氮冷却系统的类别和原理,探究了系统在低温波荡器、超导电缆和高温超导电机等领域的应用,并对系统的改进和应用前景作了展望。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.     

A novel methodology for photometric compensation of projection display on patterned screen

We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and a color modulator.The perfect white screen is used to automatically and accurately characterize the ProCam system offline using the polynomial model,and the parameters of the color modulator can be efficiently recovered by employing only two gray images based on the linear reflectance model.The experimental results show that the color artifacts of the display image can be greatly improved with this methodology,which demonstrates its feasibility and validity in the photometric compensation.     

Direction-of-arrival estimation using matrix spatial prefiltering approach

An approach to direction-of-arrival （DOA） estimation for multiple narrowband farfield signals is proposed. The technique uses a novel matrix spatial prefiltering approach. Specifically, a matrix filter is designed to spatially filter the incoming data snapshots. The un-wanted components arriving from the stopband angular sectors are attenuated and the desired components from the angular sector of interest pass with minimal distortion. The matrix filter spatially filters the element-space data and the output reserves the element-space data property, which makes it very useful by passing sensor data through a spatial prefilter prior to applying many other array processors to attenuate interferences and improve system performance. Several examples of DOA estimation problem are presented to illustrate the performance of the proposed spatial prefiltering approach. Results of simulation and real data show that the pre-filter can efficiently attenuate the spatial interferences and significantly improve the estimation and resolution capability of DOA estimators at low signal-to-noise ratios for the sources located inside the passband sector. In addition, the use of spatial prefilter makes it possible to estimate DOAs for multiple sources more than the number of the elements of an array.     

Quantum efficiency calibration of opto-electronic detector by means of correlated photons method

A new calibration method of detectors can be realized by using correlated photons generated in spontaneous parametric down-conversion (SPDC) effect of nonlinear crystal.An absolute calibration system of detector quantum efficiency is performed.And its principle and experimental setup are introduced.A continuouswave (CW) ultraviolet (351 nm),diode-pumped,frequency-doubled,and solid-state laser is used to pump BBO crystal.The quantum efficiencies of the photomultiplier at 633,702,and 789 nm are measured respectively.The coincidence peaks are observed using coincidence circuit.Some measurement factors including the filter bandwidth of trigger channel,the detector position alignment and polarization of the pump light are analyzed.The uncertainties of this calibration method are also analyzed,and the relative uncertainties of total calibration are less than 5.8%.The accuracy of this method could be improved in the future.