LiB3O5晶体高温拉曼光谱研究

研究了LiB3 O5晶体在不同温度下(在300-1173 K的温度范围)的拉曼光谱,分析了LBO晶体结构随温度变化的规律.随着温度的升高,LBO晶体的拉曼光谱谱峰都不同程度地向低波数方向移动,也存在不同程度的展宽,同时强度减弱.发现晶体在1100 K存在明显相变,与LBO晶体的相图给出的1107 K的相变温度基本相符.     

CsB_3O_5晶体高效三倍频产生28.3W 355nm激光

利用CsB_3O_5(CBO)晶体对Nd:YAG声光调Q准连续1064 nm激光的高效三倍频效应获得高功率355 nm激光输出.1064 nm激光采用大功率脉冲式半导体激光(LD)列阵侧面抽运Nd:YAG晶体的主振荡-功率放大(MOPA)系统实现210 W的调Q准连续输出,激光以1 kHz脉冲串方试运转,每个脉冲串包含5个调Q脉冲,单脉冲宽度为40 ns.经I类LiB_3O_5(LBO)晶体倍频产生98 W 532 nm绿光.通过30 mm长的II类CBO晶体对1064 nm与532 nm光和频获得28.3 W的355 nm紫外光,相应的三倍频转换效率为13.5%,比相同条件下II类LBO晶体高28.6%.研究了CBO三倍频产生355 nm光的温度敏感特性,得到其温度带宽为25?C,远大于LBO晶体的4?C.实验证明,CBO晶体在三倍频产生355 nm的转换效率和温度不敏感性方面均优于LBO晶体.     

激光二极管抽运Nd∶YVO4/LBO腔内倍频5.3 W连续波激光器

报道了激光二极管双向抽运Nd∶YVO4 晶体、LBO腔内倍频、最大输出功率为 5 .3W的连续波绿光激光器。采用LBO晶体Ⅰ类非临界相位匹配 (NCPM) ,温度调谐 ,当抽运光功率为 2 0W时 ,获得了 5 .3WTEM0 0 模 5 32nm绿光输出 ,光光转换效率达 2 6 .5 %。并对绿光模式及输出功率随LBO晶体温度的变化关系进行了测量 ,与理论结果符合较好。     

LBO晶体的布里渊散射与弹性和压电系数的测量

简述了应用布里渊散射测量晶体的弹性和压电系数的方法,推导了C_2v点群晶体(100),(010)和(001)晶面内任意波矢方向的布里渊散射张量及声速各向异性方程.根据上述方法及结果,用180°散射测量了LBO晶体不同波矢方向的布里渊散射谱,得到了LBO晶体在特超声频率下所有独立的弹性和压电系数,并依此计算了该晶体的声速各向异性曲线. 关键词：     

无损伤超光滑LBO晶体表面抛光方法研究

传统的抛光LBO晶体的方法是选用金刚石抛光粉在沥青抛光盘上抛光。沥青盘易于变形不容易修整,金刚石粉特别硬容易损伤抛光晶体表面。抛光过程中,抛光盘和抛光粉的选择是非常重要的,直接影响到抛光效率和最终的表面质量。新的抛光LBO晶体的方法,其抛光过程是一个化学机械过程,抛光盘、抛光粉和抛光材料相互作用。选用两种抛光盘(培纶和聚氨酯盘),三种较软的抛光磨料(CeO2,Al2O3和SiO2胶体),并在LBO晶体的(001)面进行抛光实验。用原子力显微镜测量和分析了表面粗糙度。结果表明,使用聚氨酯盘和SiO2胶体能够获得无损伤超光滑的LBO晶体表面,其表面粗糙度的RMS为0.3nm。     

LiB3O5晶体高温拉曼光谱研究

研究了LiB₃O₅晶体在不同温度下(在300—1173K的温度范围)的拉曼光谱,分析了LBO晶体结构随温度变化的规律.随着温度的升高,LBO晶体的拉曼光谱谱峰都不同程度地向低波数方向移动,也存在不同程度的展宽,同时强度减弱.发现晶体在1100K存在明显相变,与LBO晶体的相图给出的1107K的相变温度基本相符. 关键词： 3O₅晶体')" href="#">LiB₃O₅晶体 高温拉曼光谱 相变     

LBO晶体上ZrO2薄膜的显微结构和光学性质

用电子束蒸发方法在三种不同取向的三硼酸锂(LiB3O5,简称LBO)晶体上沉积了ZrO2薄膜.采用分光光度计和X射线衍射技术对LBO晶体基底结构对薄膜光学性质和显微结构的影响进行了研究.实验结果表明基底结构对薄膜的显微结构和光学性质具有明显影响,即X-LBO,Y-LBO和Z-LBO上沉积的ZrO2薄膜分别沿m(-212),m(021)和o(130)择优生长,且m(021)择优取向的ZrO2薄膜具有最高的折射率和最小的晶格不匹配.     

高功率激光晶体加工技术的研究

针对高功率激光器中使用的激光晶体关键元件,开展了晶体的先进加工技术的研究。根据LBO及YCOB晶体材料的加工特性,选取了定向切割、研磨、预抛光、磁流变抛光、合成盘抛光和机械化学抛光的总体技术路线。对不同种类晶体加工设计了不同的工艺路线,开展了相关加工工艺研究。其中LBO晶体的面形收敛工艺主要采用磁流变抛光,YCOB晶体的面形工艺主要采用合成盘抛光。通过组合加工工艺,获得了高质量的晶体加工指标,LBO晶体透射波前0.12λ(λ=632.8nm),粗糙度0.77nm;YCOB晶体面形0.11λ,粗糙度0.68nm。确定了晶体元件的整体加工技术路线,并对整个工艺流程开展了工艺实验研究,取得了较好的实验效果,实现了激光晶体的高质量加工指标。     

激光二极管抽运Nd：YVO4／LBO腔内倍频5．3W连续波激光器

报道了激光二极管双向抽运Nd:YVO4晶体,LBO腔内倍频,最大输出功率为5．3W的连续波绿光激光器,采用LBO晶体Ⅰ类非临界相位匹配（NCPM）,温度调谐,当抽运光功率为20W时,获得了5．3W TEM00模532nm绿光输出,光－光转换效率达26．5％,并对绿光模式及输出功率随LBO晶体温度的变化关系进行了测量,与理论结果符合较好。     

BBO，LBO，KDP晶体光参量啁啾脉冲放大特性的比较研究

 对BBO，LBO，KDP晶体I类非共线匹配下的光参量啁啾脉冲放大的相位匹配、参量范围、增益特性等进行了理论分析，重点对BBO和LBO的光参量啁啾脉冲放大特性进行了比较。结果表明对于以光参量啁啾脉冲放大系统代替800nm中心波长的Ti:sappire再生放大系统，用BBO晶体可获得更宽的增益带宽，而对1 053nm中心波长的种子光用LBO晶体更好。     

Properties of LBO and Generation of Mode-locking Blue Femtosecond Pulses

ＰｒｏｐｅｒｔｉｅｓｏｆＬＢＯａｎｄＧｅｎｅｒａｔｉｏｎｏｆＭｏｄｅ┐ｌｏｃｋｉｎｇＢｌｕｅＦｅｍｔｏｓｅｃｏｎｄＰｕｌｓｅｓＨＵＡＮＧＦｅｉｒａｎＷＥＩＺｈｉｙｉＹＡＮＧＪｉｅＺＨＯＵＪｉａｎｙｉｎＹＵＺｈｅｎｘｉｎ（ＳｔａｔｅＫｅｙＬａｂｏｒａ...     

All-solid-state CW intracavity frequency-doubling Nd:Lu<Subscript>2</Subscript>O<Subscript>3</Subscript>/LBO red laser at 679.5 nm

We report an efficient intracavity second-harmonic generation (SHG) at 1359 nm in a non-linear optical crystal, LiB₃O₅ (LBO), performed with a diode end pumped continuous-wave (cw) Nd:Lu₂O₃ laser. In the case of a laser with a Nd:Lu₂O₃ crystal frequency-doubled with a LBO crystal cut for type I frequency doubling. A cw SHG output power of 462 mW has been obtained using a 10 mm long LBO crystal. The red power stability was 3.4% in 4 h.     

高压下LiB3O5晶体-非晶体相变的研究

 采用X射线粉末衍射和同步辐射能散X射线衍射技术，对LiB₃O₅（LBO）晶体进行了压致非晶化相变的研究，压力达45.1 GPa。实验结果表明，LBO存在两个中间相变，压力分别为5 GPa和15.8 GPa。而当压力增加到25~31.6 GPa时，LBO出现非晶态，这个非晶化相变是不可逆的。     

全固态高功率连续单横模Nd:YVO4/LBO绿光激光器

报道了激光二极管泵浦的高功率连续单横模绿光激光器。考虑到激光晶体因吸收泵浦光而产生的热透镜效应,我们选择低掺杂浓度Nd:YVO4激光晶体,设计了V字型热不灵敏折叠式驻波谐振腔,利用I类非临界相位匹配LBO非线性晶体,当泵浦功率为23 W时,得到7 W单横模532 nm绿光输出功率,光-光转化效率为33%,长期功率稳定性优于1.6%(自由运转3小时)。     

Diode-pumped continuous-wave Nd<Superscript>3+</Superscript>:YAlO<Subscript>3</Subscript> intracavity-doubled red laser

It is reported that efficient continuous-wave (CW) red laser generation at 670 nm in a LBO crystal at type-I phase matching direction performed with a diode-pumped Nd³⁺:YAlO₃ (Nd:YAP) laser. With incident pump power of 15.6 W, output power of 273 mW at 670 nm has been obtained using a 10 mm-long LBO crystal. At the output power level of 273 mW, the output stability is better than 3.7%.     

Nonlinear optical properties of (B3O7)5- and (B3O6)3- groups

3 O₅ (LBO) crystal has been studied by using the bond valence theory of complex crystals. Chemical bond parameters and linear and nonlinear optical (NLO) properties of each type of constituent chemical bonds are quantitatively determined. Because of the different crystal structure characteristics of LBO from those of β-BaB₂O₄ (BBO), the two anionic groups, (B₃O₇)^5- in LBO and (B₃O₆)^3- in BBO, play different roles in contributions to their own total NLO tensor coefficients of LBO and BBO, respectively. By comparison, we find that planar (B₃O₆)^3- groups are the ideal structure model, leading to little cancellation of contributions of each kind of bond in these groups, and this gives us a useful guide to design new NLO materials in the future. Received: 24 January 1997/Accepted: 27 March 1997     

Luminescent properties of crystalline lithium triborate LiB3O5

A study of the luminescence characteristics of crystalline lithium triborate LiB₃O₅ (LBO) is reported. Investigation of the excitation and photoluminescence spectra of nominally pure, oriented LBO crystals within broad spectral (1.2–10.5 eV) and temperature (8–500 K) regions, complemented by optical spectroscopy at the long-wavelength fundamental-absorption edge, has revealed that the broad-band LBO luminescence in the 3.5–4.5-eV region is efficiently excited by photons having energies above 7.5 eV in recombination processes and under corpuscular or x-ray irradiation. The totality of the experimental data obtained permitted a conclusion that the LBO luminescence has an intrinsic nature and that it originates from radiative decay of relaxed electronic excitations. Fiz. Tverd. Tela (St. Petersburg) 41, 223–228 (February 1999)     

All-solid-state continuous-wave frequency-doubled Nd:YAG-BiBO laser with 2.8-W output power at 473 nm

We report on a diode-pumped Nd:YAG laser with 4.6 W of linear polarized continuous-wave (cw) output power on the 4F3/2 --> 4I9/2 transitions at 946 nm. Three different crystals, cut for critical type I phase matching at room temperature, are used for the intracavity frequency doubling of the laser: 10-mm-long LiBaO5 (LBO), an 8-mm-long beta-BaB2O4 (BBO), and a 10.4-mm-long BiB3O6 (BiBO) grown by FEE GmbH. Up to 2.8 W of cw output power in the blue spectral range at 473 nm has been achieved with the BiBO crystal (2.1 W with BBO and 1.5 W with LBO).