Ku/Ka波段双通带频率选择表面雷达罩设计研究

为了满足现代通信设备多频带及集成化要求,基于耦合机理和谐振机理,在实心半波壁雷达罩和A 夹层雷达罩等效平板基底上设计了一种由容性表面（内嵌谐振单元）-感性表面-容性表面（内嵌谐振单元）-等效基底级联而成的Ku/Ka波段双通带频率选择表面结构. 根据FSS的物理结构建立了等效电路模型,分析了滤波机理,利用全波分析软件计算了两种FSS雷达罩的传输特性. 该结构基于容性表面与感性表面的耦合作用在Ku波段形成具有微型化特性的第一通带,基于两个容性表面内嵌的方环单元谐振在Ka波段形成第二通带,两通带透过率分别为89%,94.7%（实心半波壁FSS雷达罩）、88.2%/93.7%（A夹层FSS雷达罩）,在0°–45°扫描范围内,两通带传输特性稳定. 在半波壁雷达罩的等效平板上制作了Ku/Ka双通带实验样件,利用自由空间法测试其传输特性,在制作误差允许的范围内,测试结果与仿真结果基本一致. 为研究通带间隔较宽的多频FSS 提供了理论和实验依据. 关键词： 雷达罩 频率选择表面(FSS) 双通带     

Ku/Ka波段双通带频率选择表面设计研究

为了实现双通带频率选择表面(FSS)在较厚介质基底、 较大频带间隔和入射角度下的工程应用, 设计制备了一种性能优良的Ku/Ka波段双频FSS结构. 利用FSS栅瓣图分析了FSS具有稳定滤波特性的条件. 应用矢量模式匹配法计算了基于分形技术和复合图形技术的FSS的传输特性. 根据单元谐振模式和FSS传输特性归纳了厚介质基底、较远双通带FSS的设计原则, 最终优化出一种由方环复合“Y”环单元组成的FSS结构. 结果表明: 该结构在6.7 mm厚介质基底上0°-45°扫描范围内, 在Ku/Ka波段具有稳定的双频传输特性, 透过率均优于75%. 这为设计基底厚度较大、频带间隔较远、入射角度要求较高的双带FSS结构提供了理论参考与实验依据. 关键词： 频率选择表面 双通带 分形结构FSS 复合结构FSS     

小型化多层双模基片集成波导平衡带通滤波器

针对平衡滤波器小型化和高选择的应用需求,提出两种新型的多层双模基片集成波导平衡带通滤波器。首先详细分析了基于平衡端口馈电的双模基片集成波导谐振器的特性;然后根据谐振模式分布特性,设计了一种输入输出馈线同时在上层双模谐振器上的四阶平衡带通滤波器,下层双模谐振器通过十字交叉槽线结构与上层谐振器耦合,可以实现三个传输零点;又提出一种输入和输出馈线分别在上层和下层双模谐振器上的四阶平衡带通滤波器,上层和下层谐振器通过一个槽线进行耦合,可以实现两个对称的传输零点。基于提出的两种平衡滤波器结构,分别设计了一个中心频率为10 GHz的平衡带通滤波器,并进行加工和测试。测试和仿真结果一致性较好,表明了该结构可以实现小型化和高选择,并且具有很好的共模抑制特性。     

折叠半模基片集成波导在滤波器和均衡器中的应用

提出了一种数学建模方法用来分析折叠半模基片集成波导(FHMSIW)结构的场分布。基于多线理论首次计算了FHMSIW结构的衰减常数和相位常数,验证其与传统波导和基片集成波导的等效性。提出了FHMSIW结构具有高通特性和带阻特性,同时该结构的上下层具有近似奇对称的性质。通过在FHMSIW结构的中间金属层蚀刻缝隙或者添加金属过孔,就可以实现器件由带通到带阻的性能转换,给出了FHMSIW结构带阻、带通特性的产生和变换机理。利用其独特的性质,分别设计了等效HMSIW四分之一谐振枝节加载的FHMSIW均衡器和FHMSIW带通滤波器,设计的FHMSIW均衡器无需附加额外的馈电机制。测量结果显示出器件具有良好的性能,与仿真结果具有很好的一致性。相比于其他的平面电路,该设计的结构具有小型化、低损耗以及高Q值等优势。     

FILTERING CHARACTERISTICS OF DOUBLY SINUSOIDAL PERIODIC MEDIA

Dispersion and filtering characteristics of doubly sinusoidal periodic (DSP) medium is investigated. Based on its feature different from singly sinusoidal periodic medium, a novel dual-band filter model is realized and measured. The results show that even a single unit cell of DSP medium can provide rather good filtering performance. And the filter is of perfect compatibility with regular waveguide and substrate integrated waveguide technology. *Supported in part by 60171014 and 50577029 NSFC, P. R. China.     

Dual-band optical filter based on a single microdisk resonator

We propose and experimentally demonstrate a dual-band optical filter based on a single microdisk resonator. An analytical model is built based on the transfer matrix method and is applied to simulate the properties of such a device. Competition and interference of the dual modes in the resonator lead to dual-band filtering with high isolation. As the finite-difference time-domain simulation illustrates, two low-order resonant modes can be effectively triggered by optimizing the waveguide width and spacing gap between the compact resonator and waveguides. In experiment, a double side-coupled microdisk resonator was fabricated on a nanophotonic silicon-on-insulator platform, and dual-band bandpass filtering is realized with an optical isolation higher than 20 dB and an insertion loss lower than 2 dB. The experimental results agree well with our modeling results.     

Influence of substrate process tolerances on transmission characteristics of frequency-selective surface

Frequency-selective surface （FSS） is a two-dimensional periodic structure consisting of a dielectric substrate and the metal units （or apertures） arranged periodically on it. When manufacturing the substrate, its thickness and dielectric constant suffer process tolerances. This may induce the center frequency of the FSS to shift, and consequently influence its characteristics. In this paper, a bandpass FSS structure is designed. The units are the Jerusalem crosses arranged squarely. The mode-matching technique is used for simulation. The influence of the tolerances of the substrate＇s thickness and dielectric constant on the center frequency is analyzed. Results show that the tolerances of thickness and dielectric constant have different influences on the center frequency of the FSS. It is necessary to ensure the process tolerance of the dielectric constant in the design and manufacturing of the substrate in order to stabilize the center frequency.     

电磁屏蔽用低频比小型化双频带频率选择表面

为满足敏感电子设备对频段密集相邻干扰信号的屏蔽需求,提出了一种低频比双频段带阻频率选择表面（FSS）结构。该结构由介质层和印刷在其两侧并谐振在不同频率的金属导带层构成。通过对两侧金属导带的互补型设计,削弱了两个谐振点间的耦合影响,使该FSS结构具有两个可以独立调节且紧密相邻的阻带,呈现出低频比特点。仿真结果表明,此结构可以实现低至1.16的谐振频率比。基于弯折结构的小型化设计使该FSS的单元尺寸仅为0.071λ,确保所提结构在TE和TM两种极化电磁波照射下,电磁屏蔽效能大于24 dB的入射角度稳定性高达60°。制作了实物并进行测试,实测结果与仿真结果吻合良好,验证了FSS结构设计的可靠性。     

Single-layer dual-band terahertz filter with weak coupling between two neighboring cross slots

A dual-band terahertz(THz) filter consisting of two different cross slots is designed and fabricated in a single molybdenum layer. Experimental verification by THz time-domain spectroscopy indicates good agreement with the simulation results. Owing to the weak coupling between the two neighboring cross slots in the unit cell, good selectivity performance can be easily achieved, both in the lower and higher bands, by tuning the dimensions of the two crosses. The physical mechanisms of the dual-band resonant are clarified by using three differently configured filters and electric field distribution diagrams. Owing to the rotational symmetry of the cross-shaped filter, the radiation at normal incidence is insensitive to polarization. Compared with the THz dual-band filters that were reported earlier, these filters also have the advantages of easy fabrication and low cost, which would find applications in dual-band sensors, THz communication systems, and emerging THz technologies.     

Frequency-selective microwave polarization rotator using substrate-integrated waveguide cavities

A frequency selective polarization rotator that can rotate the polarization angle of an incident electromagnetic wave at the microwave frequency by 45 is presented. The polarization rotator is based on a two-dimensional periodic array of substrate integrated waveguide cavities, realizing the polarization rotation by coupling the input signal to the output wave through three metallic slots. Two layers of frequency selective surfaces are cascaded by substrate and form the polarization rotator. A vertical slot on the top layer is used to select the horizontal polarization from the incident wave, the vertical and the horizontal slots on the bottom layer are, respectively, used to obtain horizontally and vertically polarized outgoing waves. The two orthogonal outgoing waves are combined to result in the 45~ polarized wave. Both full wave simulation and experimental measurement are carried out, together validating the proposed method.     

A dual-band flexible frequency selective surface with miniaturized elements and maximally flat (Butterworth) response

A dual-band flexible frequency selective surface （FSS） with miniaturized elements and maximally flat （Butterworth） response is presented in this paper. It is composed of three metallic layers, which are fabricated on thin flexible polyimide substrates and bonded together using thin bonding films. The overall thickness of the proposed structure is only about 0.3 mm, making it an attractive choice for conformal FSS applications. All the three layers can constitute a miniaturized- element FSS （MEFSS） and produce the first pass-band with miniaturization property, while the up and bottom layers can constitute a symmetric biplanar FSS and produce the second pass-band with maximally fiat （Butterworth） response. The two pass-bands are independent and there is a wide band spacing up to 30 GHz between them. The principles of operation, the simulated results by using the vector modal matching method, and the experimental values of the fabricated prototype are also presented and discussed.     

L波段全腔提取轴向输出相对论磁控管设计

设计了一种全腔提取轴向输出相对论磁控管。在模工作的N腔磁控管中, 该结构利用磁耦合的方式通过两个相邻谐振腔在一个扇形波导内激励起TE11模, 然后再由N/2个相位相同的扇形波导TE11模沿轴向向外传输。对L波段全腔提取轴向输出磁控管进行了仿真设计, 在600 kV, 6.3 kA的条件下, 获得1.89 GW微波输出, 功率转换效率50%, 微波频率1.57 GHz。该结构在径向方向上仅增加一个扇形波导厚度, 便于实现相对论磁控管的紧凑、高效设计。     

新型复合左右手传输线及其在滤波器设计中的应用

开环谐振器阵列由于结构庞大, 难以实现小型化, 而逆开环谐振器则由于刻蚀在接地板上, 容易对微波电路中其他部件造成干扰. 针对上述问题, 提出了一种新型双层介质复合左右手传输线结构, 并提取了其等效相对介电常数和等效相对磁导率, 然后分析了新结构的尺寸参数对其传输特性的影响程度, 最后将一种新型Minkowski分形曲线应用于该结构, 设计和制作了两款双频滤波器, 验证了该复合左右手传输线的双频特性.     

A plasmonic waveguide end-coupled to two plasmonic cavities in a non-Hermitian quantum system for dual-band unidirectional reflectionlessness

We demonstrate the possibility of dual-band unidirectional reflectionlessness in a non-Hermitian quantum system composed of a plasmonic waveguide and two end-coupled plasmonic cavities(PCs).Our scheme exhibits dual-band unidirectional reflectionlessness can be obtained at exceptional points by properly adjusting the coupling strength between two PCs,the ratio of decay rates of two PCs,and the ratio of plasmonic cavity-waveguide coupling strengths.As a valuable feature,the quality factor reaches to~175.4 in forward direction,while the backward quality factor is close to~188.2.     

W波段基片集成波导缝隙阵天线的研究

介绍了一种低成本高效率的W波段4×4基片集成波导(SIW)缝隙阵天线。天线阵为双层结构,上层为辐射层,采用宽边纵向偏移缝隙驻波阵,可以实现高的辐射功率,下层为馈电层,采用SIW串联缝隙馈电方式,减小了传统功分网络带来的传输损耗和实现难度。对天线阵进行了优化设计,采用标准低成本PCB工艺制作了天线阵实物样品并进行测试。测试结果与仿真结果吻合较好,天线阵在94 GHz时,最大增益为16.8 dB,反射系数-30.1 dB,-10 dB带宽为92.6~96 GHz,副瓣电平19.5 dB,天线阵口径效率为83%。     

Doubly resonant single-layer bandpass optical filters

A bandpass filter based on guided-mode resonance effects in a single-layer periodic waveguide is presented. Strong refractive-index modulation is used to support the excitation of a resonance pair in which leaky waveguide mode TE0 is excited by the second diffraction order and TE2 by the first diffraction order. It is shown that one resonance provides a broad low-transmission band, whereas the other supplies the transmission peak through its asymmetrical line shape. A bandpass filter with central wavelength at 1.55 microm is presented to demonstrate this concept.     

级联电磁带隙结构对双频微带天线互耦的影响

一种均匀面片尺寸的图钉型电磁带隙结构只能实现一个表面波带隙,而将不同参数的图钉型电磁带隙结构级联可以实现多个或宽带的表面波带隙。利用不同金属面片尺寸的图钉型电磁带隙结构级联的方法实现双带的表面波带隙。设计两种均匀的电磁带隙结构,使其带隙范围分别覆盖天线的两个工作频带,然后将这两种结构级联起来,加载于两个缝隙天线单元之间。仿真分析和实验结果表明,级联型的电磁带隙结构可以有效抑制表面波,在两个频率带内同时减小互耦。     

环形狭缝腔阵列光学特性的研究

设计了一种六角密排的二维环形纳米腔阵列结构, 利用时域有限差分算法对该结构的光学特性进行了探究. 仿真结果表明, 在线性偏振光入射时, 环形腔内可以形成多重圆柱形表面等离激元谐振, 谐振波长的个数和大小与环形腔的结构参数相关. 根据透、反射光谱, 电场矢量的模式分布及截面电荷密度的分布, 谐振波长处形成圆柱形表面等离激元, 谐振波长处入射光能量大部分在环形腔内损耗, 此时反射率为极小值, 环形腔内的电场增强效应为极大值(光强增强可达1065倍). 谐振波长与环形腔的结构参数(狭缝内径、狭缝外径、膜厚、环境介质折射率、金属的材质)相关, 通过调节结构参数, 谐振波长在350–2000 nm范围内可调. 通过对比相同结构参数的单个环形腔和环形腔阵列的仿真结果, 周期排布对环形腔内的圆柱形表面等离激元吸收峰位置影响不明显. 该结构反射光谱对入射光电矢量偏振方向不敏感. 谐振波长的可调控性对于表面拉曼增强和表面等离激元共振传感器的设计与优化具有指导性意义, 且应用于折射率传感器时灵敏度可达1850 nm/RIU.     

Dual-Band Bi-Directional Pattern Reconfigurable Fractal Patch Antenna for Millimeter Wave Application

A novel dual-band bi-directional reconfigurable antenna based on Koch patch is presented in this paper. By controlling the switches in the slots etched on the Koch patch, different far field bi-directional patterns at the dual-band around 60 GHz/80 GHz could be achieved. And full azimuthal coverage at this dual-band is possible by electronically controlling the switches in the slots of the patch. This work was supported by the National Natural Science Foundation of China (No. 60371008, No. 90505001) and the CRT Program of UESTC.     

0.34 THz频率选择表面带通滤波器设计

为满足太赫兹通信的需求,基于薄膜工艺和双层级联的结构,设计了一种0.34THz频率选择表面带通滤波器。利用等效电路模型分析了该滤波器的频率特性,通过仿真研究了入射角对该结构频率特性的影响,显示水平极化条件下其在低于45°入射角范围内具有较好的性能。最终按照所评估的误差容忍度加工了Jerusalem十字单元的频率选择表面样片,并进行了频率传输特性的测试与分析,结果表明:该滤波器具有较好的滤波特性。