相对论速调管单重入谐振腔的解析分析

 推广了一种相对论速调管单重入式无栅间隙圆柱谐振腔的解析分析与计算方法 。根据场的等效原理将腔体分为三个规则的区域,每个区域中的场由界面上的磁流所产生,利用格林函数积分法可得各个区域的场分布。由两相邻区域公共界面上的场匹配条件得谐振腔的色散方程,从而解得腔体的谐振频率,同时可得腔体的特性阻抗和场分布等参数。     

大耦合孔同轴输出腔的3维解析分析

 在高功率微波器件中，通常采用大耦合孔的同轴微波输出腔，该腔为3维结构。采用场等效原理将腔体、耦合孔及其输出负载(行波边界)进行分区,每个区域中的场由界面上的磁流密度决定。采用格林函数积分法可得每个区域中的3维场,再由各个区域的场匹配方程求得腔体的谐振频率、特性阻抗、有载品质因数、模式分布等参数。为腔体的计算和设计提供一种计算模型。     

基于BLT方程的双层腔体屏蔽效能计算方法

基于波导理论,将BLT方程进一步拓展,提出一种可快速、准确地计算双层腔体内任意点屏蔽效能的方法。首先将腔体壁孔所在面等效为二端口网络,腔体等效为两端短路的波导,建立信号流图。引入孔阻抗计算二端口网络散射参数,依据信号流图构建广义BLT方程,得到内层腔体中心线上点的屏蔽效能;然后根据波导理论的场分布特性,推导出腔体内任意点电场与腔体中心线上电场的关系,最终得到内层腔体内任意点的屏蔽效能。将计算结果与等效电路法及CST数值仿真结果对比,三者吻合良好,计算结果在较大频率范围内比等效电路法精度更高。该方法可以准确预测双层腔体在0~2.5GHz范围内所有谐振点,有助于分析腔体谐振现象,且计算效率较高,占用资源大幅减少。     

输入腔高频场的矩阵分析

 应用模匹配理论推导和建立了单级突变的矩阵方程，并分析给出了具有多级突变和渐变结构级联情况下波导腔体的处理方法。在理论推导的基础上，通过编制程序计算出多级突变结构波导腔体模匹配系数级联矩阵，并由矩阵参数得到所需的腔体谐振频率和Q值等物理特性参量。实际计算结果表明，由程序模拟输入腔计算得到的数据结果与腔体的冷测实验结果基本一致，为进一步的注波互作用研究和回旋速调管的设计工作提供了参考依据。     

一种考虑小孔尺寸效应的孔阵等效建模方法

对带孔阵腔体的电磁屏蔽特性进行数值计算时,为减少模型网格数量并降低孔阵建模复杂度,提出一种考虑小孔尺寸效应的孔阵等效建模方法.首先将孔阵等效为面积相同的单孔,然后根据孔数量对单孔尺寸进行缩小.利用孔阵导纳理论和数值仿真拟合方法分别建立缩小比例与小孔数量的关系,对比得出拟合方法得到的缩小比例公式精度较高的结论.通过改变干扰源、监测点位置、孔阵面积、孔阵位置、小孔形状及腔体尺寸等参数,验证了等效方法的适用性.孔阵等效建模方法能在保证仿真精度的前提下显著减少网格数量,可为大型复杂腔体屏蔽特性的数值计算提供一种有效的简化手段.     

含有吸收介质的突变结构腔体场匹配分析

采用分区求解场及边界场匹配方法推导出含有吸收介质波导的色散方程及突变结构高频腔体混合模式的场匹配方程。将解析分析与数值计算结合，对回旋速调管放大器高频腔体进行了数值计算，研究了吸收层对波导传播、衰减特性及谐振腔的谐振特性、损耗特性、Q值、场分布的影响。给出了数值模拟主要结果。 关键词： 吸收介质 场匹配 混合模 谐振腔 高功率微波     

腔体内传输线耦合的电磁仿真软件与传输线方程的混合算法

研究了一种有限积分法软件与传输线方程相结合的混合算法,用于解决复杂电磁环境下屏蔽腔体内传输线的电磁耦合问题。利用有限积分法软件实现屏蔽腔体的建模,仿真得到腔体内部空间电磁场分布,并设置电场探针提取出传输线的激励场。利用传输线方程建立腔体内传输线的耦合模型,将得到的传输线激励场引入到传输线方程作为等效分布电压和电流源。利用时域有限差分(FDTD)格式对传输线方程进行离散,从而迭代求解出传输线终端负载上的电压和电流响应。通过与文献以及传统数值算法的计算结果进行对比,验证混合算法的正确性。研究表明,该混合算法在模拟电大尺寸腔体内传输线的电磁耦合方面,具有较高的精度和计算效率。     

一种内置条状金属板的双层金属腔体屏蔽效能的理论模型

针对复杂屏蔽腔体往往是由多个空间构成的实际情况, 本文构建了内置条状金属板的双层金属腔体物理解析模型, 将外层腔体的近场电磁干扰等效为电偶极子, 基于Bethe小孔耦合理论并利用推广的腔体格林函数推导了内腔体的电磁场分布的近似表达式. 利用该解析模型计算分析了条状金属板的位置和方向对屏蔽效能的影响. 通过计算结果与全波仿真软件CST仿真结果的对比, 证实了本文所建理论模型的有效性, 为复杂腔体屏蔽效能的快速计算提供了理论参考.     

含腔电大尺寸导体目标电磁散射的一体化数值模拟

应用等效原理，通过引入口面上等效磁流将含腔导电目标电磁散射简化为腔内、外两个等效 问题. 腔内问题分段求解并应用级联法获得口面等效导纳矩阵；腔内外的耦合关系应用近似 边界元方法描述并由此获得口面等效磁流；最后，这一具有混合源的腔体内外一体化散射问 题则应用所提出的广义混合场积分方程方法建立电磁模型，并用多层快速多极子方法实现高 效数值求解. 实例计算结果与测试结果具有很好的一致性. 关键词： 含腔目标 电磁散射 混合场积分方程 数值分析     

开孔矩形腔体电磁泄漏特性的解析研究

本文提出了一种用于计算开孔矩形腔体电磁泄漏场的解析理论模型.该理论模型先基于模式展开法求解封闭腔场,进而依据Bethe小孔耦合理论将泄漏场与封闭腔场用等效偶极子关联.该模型可以考虑波频率、场源位置、开孔位置及场强观测点位置等因素的影响,计算结果与全波仿真结果一致.本文计算分析了相关因素对电磁屏蔽效能的影响规律,并给出了物理解释.结果表明近场屏蔽效能小于远场屏蔽效能,且近场区电场屏蔽效能与磁场屏蔽效能并不相同.     

Equivalent source method for identification of panel acoustic contribution in irregular enclosed sound field

For the interior sound field formed by the complex vibrating structure,an identification approach of panel acoustic contribution based on equivalent source method(ESM)was presented.The normal velocity on the surface of vibrating structure was first reconstructed by using interior nearfield acoustic holography based on ESM and the prediction of whole interior enclosed sound field was realized.Then the sound pressure produced by each panel at the interested field point was respectively replaced by the radiated pressure of the enclosed interior sound field which is formed by the equivalent virtual sources located near the surface of the cavity.Combining with the reconstructed normal surface velocity,the acoustic contribution of each panel to any position in the cavity was obtained by transforming the complex enclosed non-free field into the simple interior free field.Numerical simulations and experiments are conducted,and the influences of the number of the equivalent sources and the distance between them and the reconstructed surface have been investigated.The results show that the proposed method is easier to be implemented with the same accuracy than the traditional analysis method.     

复杂封闭声场面板声学贡献度识别的等效源法

针对由复杂结构振动形成的封闭空间声场,提出了一种基于等效源法的面板声学贡献度分析方法。该方法首先利用基于等效源法的内部声全息技术,重构出振动结构表面的法向振速并实现对整个内部封闭声场的预测。再将振动结构的每个面板在腔体内部场点产生的声压分别用位于空腔表面附近的等效源在该点产生的辐射声压代替,将复杂的封闭非自由声场问题转化为简单的内部自由场问题,结合重建出的结构表面法向振速进而识别出封闭振动结构各面板对腔体内任意位置的声学贡献度。通过对复杂结构内声场的数值仿真和验证实验,分析了等效源的数量及与重建面距离等参数对重建精度的影响,结果表明所提方法不仅能够达到传统数值分析方法的计算精度,而且具有更简单的求解过程。      

Reciprocity principle-based model for shielding effectiveness prediction of a rectangular cavity with a covered aperture

According to the reciprocity principle, we propose an efficient model to compute the shielding effectiveness of a rectangular cavity with apertures covered by conductive sheet against an external incident electromagnetic wave. This problem is converted into another problem of solving the electromagnetic field leakage from the cavity when the cavity is excited by an electric dipole placed within it. By the combination of the unperturbed cavity field and the transfer impedance of the sheet, the tangential electric field distribution on the outer surface of the sheet is obtained. Then, the field distribution is regarded as an equivalent surface magnetic current source responsible for the leakage field. The validation of this model is verified by a comparison with the circuital model and the full-wave simulations. This time-saving model can deal with arbitrary aperture shape, various wave propagation and polarization directions, and the near-field effect.     

Theoretical Study of Millimeter Wave Harmonic Oscillator Stabilized with a Transmission Cavity

An equivalent circuit model of millimeter wave second harmonic oscillator stabilized with a transmission cavity has been proposed for constructing analytical formulations between performance parameters of the oscillator and parameters of the circuit. The model consists of an equivalent circuit of fundamental wave and that of second harmonic wave. Each of the circuits comprises circuit models of main cavity, transmission waveguide, and transmission cavity. Absorbing material placed between the transmission waveguide and the transmission cavity can suppress additional resonances originated from transmission cavity. The behavior of the second harmonic oscillator can be effectively described by the circuit model. Furthermore, based on this model, mechanical tuning characteristics have been studied at first, and then analytical formulas for quality factor and efficiency depending on circuit parameters have been derived. The circuit parameters can be conveniently extracted by electromagnetic field simulation. Hence the formulas exhibit both compact form and enough accuracy. Thereafter, general rules of performance parameters varying with circuit parameters have been deduced for the harmonic oscillators. Then some design considerations have been derived according to the corresponding analysis. The equivalent circuit model is useful for designing and adjusting millimeter wave second harmonic stabilizing oscillator with a transmission cavity.     

射频超导谐振腔中的电磁场研究

由高纯铌制成的射频超导谐振腔在高场时会出现Q值下降现象，这是高场下超导腔表面局部磁场增强所致. 为研究高场下超导腔表面的电磁场特性，用单cell超导腔设计了腔表面峰值磁场的研究实验. 通过对单cell超导腔表面峰值磁场的测量，可以确定超导腔焊缝及iris附近表面是否存在缺陷，以便进一步进行腔的处理来改进腔的性能.     

1.3 GHz超导腔磁通排出效应研究

设计并搭建了一套高精度的磁场测量和补偿系统,并结合中国科学院高能物理研究所(IHEP)的2K超导腔垂直测试平台对1.3 GHz单加速间隙超导腔的磁通排出效应开展了实验研究:利用研制的磁场测量和补偿系统能够精密地测量超导腔赤道位置磁场,并能够将磁场补偿至小于5.0×10-8 T;并对超导腔不同表面温度梯度下的磁通排出效应进行了测量分析;对钉扎了磁场的超导腔进行了射频性能测试,研究了超导腔电阻对磁通钉扎的敏感度,以及在不同电场梯度下超导腔的表面电阻变化情况。结果表明,研制的高精度磁场测量和补偿系统能够满足超导腔磁通排出研究的需求;高的超导腔表面温度梯度有利于磁通的排出;磁通钉扎电阻的敏感度随着加速电场梯度的增加而增大,导致超导腔的性能下降。此实验研究也为后续超导腔的研制奠定了一定基础。     

A simplified model of mouth radiation impedance closed by mask cavity

Acoustic radiation impedance of the mouth is an important parameter when the vocal tract is modelled by the equivalent electrical circuit. If the vocal tract is closed by a cavity, as when the speaker wears some kind of mask, total impedance acoustically loading the vocal tract becomes serial connection of the mouth radiation impedance and the mask impedance. In that case the mouth radiation impedance has to be changed compared to free field conditions. This paper introduces a simplified approach to the modelling of that change by an appropriate reduction coefficient. The analysis based on an experiment preformed by measurement in the vocal tract physical model accompanied with analytical estimation has shown that the value of such reduction coefficient is 0.5. The results reveal that for a vocal tract closed with mask cavity the change in mouth radiation impedance introduced in an equivalent electrical circuit can be approximated by the value for free field radiation decreased by about 50%.     

Plasmon resonances in deep nanogrooves of reflective metal gratings

Metallic gratings with very deep and narrow grooves are fabricated and their reflection spectra are characterized, which explicitly show high-order standing-wave-like resonances of surface plasmons in the cavity of nanogrooves. The effect of in-plane surface plasmon resonance is also observed, which is shown to have only a minor role on the reflection of such gratings, unlike that for shallow gratings. Using numerical simulations, the cavity resonances and their effects on the reflection of the gratings are identified and further analyzed. As field is more enhanced in the nanogrooves under cavity resonance conditions, the enhancement is also found to be dependent on the grating period, i.e. the strongest enhancement takes place for higher-order resonance modes for smaller grating period. For gratings with shallower grooves, comparable enhancement of field is also achievable by proper design of the grating period. The study suggests that field enhancement can be realized at selective wavelengths in a wide spectrum range using cavity resonances in the deep nanogrooves of metal gratings, and the position for field-enhancement can be tuned by the depth and period of the gratings.