Preparation and characterization of carbon nanotubes encapsulated GaN nanowires

A novel two-step catalytic reaction is developed to synthesize gallium nitride nanowires encapsulated inside carbon nanotubes (GaN@CNT). The nanowires are prepared from the reaction of gallium metal and ammonium using metals or metal alloys as a catalyst. After the formation of the nanowires, carbon nanotubes are subsequently grown along the nanowires by chemical vapor deposition of methane. The structural and optical properties of pure GaN nanowires and GaN@CNT are characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy and Raman spectroscopy. The results show that GaN nanowires are indeed encapsulated inside carbon nanotubes. The field emission studies show that the turn-on field of GaN@CNT is higher than that of carbon nanotubes, but substantially lower than that of pure GaN nanowires. This work provides a wide route toward the preparation and applications of new one-dimensional semiconductor nanostructures.     

Preparation and photoluminescence of Sc-doped ZnO nanowires

We demonstrate bulk synthesis of single-crystal Sc-doped ZnO nanowires by using (Sc+Zn) powders at . These mass nanowires are characterized through X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy (TEM), selected area electron diffraction, and high-resolution TEM, which have uniform diameters of about 40 nm and microns of several decades in length. The growth of ZnScO nanowires is suggested for self-catalyzed vapor–liquid–solid. In particular, PL spectra of these nanowires show emission peaks that intensely shift to long wavelength with increasing Sc and the doping quantity is found responsible for the different characteristics, in which PL mechanism is explained in detail.     

Synthesis and characterization of crystalline carbon nitride nanowires

Carbon nitride nanowires were synthesized by thermal nitridation of multiwalled carbon nanotubes in a horizontal tube furnace. Scanning electron microscopy and transmission electron microscopy images revealed the large-scale formation of nanowires. Selected-area electron diffraction images and high-resolution transmission electron microscopy images show that the as-synthesized nanowires grow preferentially along the [110] direction, with diameters of 15 to 100 nm and lengths from several tens of micrometers to several millimeters. Here, the growth mechanism of these nanowires is proposed.     

Synthesis and Photocatalytic Activity of One-dimensional ZnO-Zn2SnO4 Mixed Oxide Nanowires

采用简单的热蒸发方法得到具有不同尺寸的混合ZnO-Zn2SnO4 (ZnO-ZTO)纳米线,并对纳米线进行结构和成分分析,试验还以甲基橙溶液为处理对象考察了ZnO-ZTO纳米线的光催化活性.结果表明ZnO-ZTO 混合纳米线的光催化性较纯ZnO、纯Zn2SnO4纳米线有较大提高; 光催化剂浓度对光降解效率有很大影响, 与纯ZnO、纯Zn2SnO4纳米线相比,少量的ZnO-ZTO纳米线即达到较高的光催化效率;并且光催化活性随着纳米线直径的减小而增加. 实验表明异质结的存在能够加快电子空穴的分离,提高光催化活     

Characterization for metamaterials with a high refractive index formed by periodic stratified metallic wires array

Ultralong ZnO nanowires were successfully prepared on a large scale by a microwave-assisted aqueous route without using any surfactant or template at relatively low temperature of 120°C. The obtained nanowires were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), and energy-dispersive X-ray spectrum (EDX). The growth mechanism and photoluminescence of the one-dimensional nanostructure, and photovoltaic performances for dye-sensitized solar cell (DSSC) of the nanowires were discussed in detail.     

秧苗状Zn2SnO4纳米线的制备及光致发光性能研究

本文通过化学气相沉积方法成功制备了秧苗状Zn2SnO4纳米线,X射线衍射表明,样品为面心立方结构的Zn2SnO4,同时含有少量的ZnO物相,并且可以通过延长沉积时间的方法获得较为纯净的Zn2SnO4材料.SEM结果显示样品形貌为秧苗状的纳米线.通过样品的光致发光谱的研究发现,Zn2SnO4 的紫外发光强度随着ZnO杂相...     

Sonochemical synthesis and optical properties of amorphous ZnO nanowires

Large-scale amorphous wire-like ZnO nanostructures were prepared by ultrasonic spray pyrolysis Zn(CO)₅ without involvement of any template or patterned catalyst. The as-obtained amorphous ZnO nanowires were characterized using scanning/transmission electron microscopy, X-ray diffraction/photoelectron spectroscopy, energy-dispersed X-ray spectrometry, selected area electronic diffraction, and high-resolution transmission electron microscopy. The results reveal the as-made noncrystalline samples are about 30–60 nm in diameter and several tens of microns in length and the growth mechanism is tentatively proposed as the self-assembly soft template mechanism. The photoluminescence spectra in all of the as-studied specimens exhibit one wide visible emission peak in about 508 nm. The corresponding PL intensity greatly increased with an annealing temperature, which has an application for a high efficiency vacuum fluorescent displays and a low-voltage phosphor.     

Sol–gel template synthesis and characterization of LaCoO3 nanowires

Densely packed LaCoO₃ nanowires of the rare-earth perovskite-type composite oxide were synthesized within a porous anodic aluminum oxide (AAO) template by means of the sol–gel method using nitrate as raw the material and citric acid as the chelating agent. The results of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that the LaCoO₃ nanowires possessed a uniform length and diameter, which were controlled by the thickness and the pore diameter of the applied AAO template, respectively. The results of X-ray diffraction (XRD) and the selected area electron diffraction (SAED) indicated that the LaCoO₃ nanowires had a rhombohedral perovskite-type crystal structure. Furthermore, X-ray photoelectron spectroscopy (XPS) demonstrated that LaCoO₃ nanowires were formed. Finally, the formation mechanism of nanowires was also discussed. PACS 61.66.Fn; 61.46.-W; 81.20.Fw     

Preparation and photocatalytic activity of Mo-doped WO3 nanowires

Mo-doped WO₃ nanowires were fabricated by a hydrothermal method in the presence of K₂SO₄. The physical properties of prepared nanowires were characterized by X-ray diffraction (XRD), energy-dispersive X-ray analysis (EDS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results show that the obtained products are nanowires with diameters ranging between 10 and 20 nm, and lengths of about 600 nm. Its photoactivity was evaluated through the photodegradation of methylene blue (MB) in aqueous solution. Effects of the molybdenum concentration on the photoactivity of the obtained samples were investigated detailedly. The experimental results indicated that the Mo-doping enhanced the photoactivity of WO₃ nanowires.     

Effects of annealing on the structure and photoluminescence of ZnO-sputtered coaxial nanowires

We reported the preparation and annealing effects of Zinc oxide ZnO/SiO_x core-shell nanowires, in which ZnO shell layers were deposited by sputtering. Based on scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and photoluminescence (PL) investigations, we monitored structural and optical changes with respect to the post-annealing process. The samples were mostly amorphous with some crystalline ZnO structure, whereas annealing at 900-1000 °C reduced the amount of Zn elements. Thermal annealing induced change in the shape of the PL emission spectra.     

Indium tin oxide nanowires growth by dc sputtering

Indium tin oxide nanowires have been grown by dc sputtering on different substrates without the use of catalysts or oblique deposition. The nanowire length was of the order of several μm, while their diameter was ∼50–100 nm. Small side branches on the nanowires were frequently observed. The nanowires were characterized by scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The growth mechanism of the nanowires is discussed.     

Synthesis and characterization of the SnS nanowires via chemical vapor deposition

Single-crystal SnS nanowires have been successfully synthesized by catalysis-assistant chemical vapor deposition. Applying Au nanoparticles which were applied on the ITO surface as the catalysator, using SnS powder and S powder as precursors and the Ar+H₂ mixed atmosphere as the shielding and carrier gas, the SnS nanowires were obtained. X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS) and Raman spectroscopy were employed to characterize the as-synthesized SnS nanostructures. The room-temperature photoluminescence properties of these as-prepared SnS nanowires were presented.     

LiFePO4纳米管的制备与表征

采用溶胶凝胶法在氧化铝模板中成功的制备了LiFePO4一维纳米管阵列．扫描电子显微镜和透射电子显微镜表征结果表明所制备的LiFePO4纳米管具有单分散性,互相平行,高度有序。综合选区电子衍射、X射线衍射以及X光线能谱表征结果,所制备的LiFePO4纳米管为单一的橄榄石型结构．这种在室温和温和条件下合成的一维LiFePO4纳米管,可以做为新型的锂离子电池正极材料．     

Thermal evaporation synthesis of zinc oxide nanowires

High quality ZnO nanowires were synthesized at high temperature without using heterogenous catalysts. The nanowires had a uniform prismatic shape and were grown in a cacti-like morphology. Characterizations of the products by X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy showed that the ZnO nanowires were single crystalline and of high purity. An intensive exciton emission was observed around 3.25 eV from the ZnO nanowires at room temperature. The growth mechanism was discussed based on the experimental conditions and the ZnO crystal growth habits. This growth method can be used to prepare other metal oxide nanowires. PACS 61.46.+w; 81.16.-c; 81.07.De, 81.05.Hd     

Pluronic P123 assisted synthesis of hollow InSn/In2O3 hybrid nanoparticles by solution dispersion

A detailed analysis of the optimum regimes of pulsed current metal electrodeposition into pores of porous anodic alumina PAA is presented. A simple model based on cathodic and anodic current transients is developed. The model is based on a simplified equivalent circuit consisting of two capacities related to the barrier and porous parts of porous anodic alumina. Nanowires of Cd, Zn, In, Ni, Co, Ag, and Cu were embedded into PAA by pulsed electrodeposition using an asymmetric rectangular ac signal. Deposited metal nanowires were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), optical spectroscopy, Auger electron spectroscopy (AES), and X-ray diffractometry (XRD).     

Growth,structure, and cathodoluminescence of Dy-doped ZnO nanowires

Dy-doped ZnO nanowires have been prepared using high-temperature and high-pressure pulsed-laser deposition. The morphology, structure, and composition of the as-prepared nanostructures are characterized by field emission scanning electron microscopy, X-ray diffraction, Raman scattering spectrometry, X-ray photoelectron spectrometry, transmission electron microscopy, and energy dispersive X-ray spectroscopy. The alloying droplets are located at the top of the as-prepared Dy-doped ZnO nanowires, which means that the growth of the Dy-doped ZnO nanowires is a typical vapor-liquid-solid process. The luminescence properties of Dy-doped ZnO nanowires are characterized by cathodoluminescence spectra and photoluminescence spectra at low temperature (8 K). Two peaks at 481 and 583 nm, respectively, are identified to be from the doped Dy³⁺ ions in the CL spectra of Dy-doped ZnO nanowires.     

Synthesis, morphologies and Raman-scattering spectra of crystalline stannic oxide nanowires

SnO₂ nanowires were synthesized using a direct gas reaction route and were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), selected-area electron diffraction (SAED), high-resolution transmission electron microscopy (HRTEM) and Raman-scattering spectroscopy. XRD, SEM, SAED and HRTEM indicated that the products were tetragonal SnO₂ nanowires with diameters of 10–50 nm. The nanowires were single crystal and solid inside. Dendritic nanowires were observed for the first time. Three vibrational modes were observed in the Raman spectra of the samples. Received: 7 January 2002 / Accepted: 11 April 2002 / Published online: 19 July 2002     

Fabrication, morphology and structural characterization of ordered single-crystal Ag nanowires

Highly aligned Ag nanowires have been synthesized by dc electrodeposition within a hexagonal close-packed nanochannel anodic aluminum oxide template. The pore diameter varies from 20 nm to 50 nm depending on the anodization voltage and temperature for the two types of aqueous solutions, sulphuric and oxalic acids, respectively. The size and morphology of the Ag nanowire arrays were measured by scanning electron microscopy and transmission electron microscopy. The images indicate that the highly aligned Ag nanowires grow in the uniform nanochannels of the anodic alumina template and that the size of the nanowires depends on the size of the nanochannels. X-ray diffraction, selected area electron diffraction pattern and high-resolution transmission electron microscopy images show that the Ag nanowires are single-crystal. The temperature coefficient of resistivity (temperature range from 4.2 K to 300 K) of the Ag nanowire arrays decreases with decreasing diameter of the nanowires. Received: 5 November 2001 / Revised version: 12 March 2002 / Published online: 6 June 2002     

Electrodeposition and characterization of thermoelectric Bi2Te2Se/Te multilayer nanowire arrays

Multilayer nanowire arrays of a new heterogeneous thermoelectric material, Bi₂Te₂Se/Te, were successfully fabricated by a template-assisted pulsed electrodeposition method. The nanowires were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, and energy dispersive X-ray spectroscopy, respectively. The diameter of the nanowires is in the range of 60–85 nm. By adjusting the concentration of Te precursor, the length of the Te segment can be modulated. At sufficient low concentration of Te precursor, the phase composition of the other segment can even be changed from Bi₂Te₂Se to Bi₂Se₂Te. The formation and growth mechanisms of the nanowires were proposed.     

超长定向含铁多壁碳纳米管阵列的制备

采用无模板化学气相沉积法,以二茂铁为催化剂,二甲苯为碳源,利用单温炉加热装置制备了定向碳纳米管阵列。运用扫描电子显微镜、透射电子显微镜、拉曼光谱和X射线衍射仪等对定向碳纳米管阵列的形貌、成分和物相进行细致的分析和表征。结果表明:制得的碳纳米管阵列具有良好的定向性和多壁管状结构,并且石墨化程度高;碳纳米管中除碳元素外,管中包含有少量以纳米颗粒和纳米线形式存在的铁及其化合物,主要成分是铁和碳化铁。结合碳纳米管的制备和透射电子显微镜分析表征结果,认为超长碳纳米管阵列的生长模式为底部生长方式,即经历催化剂分解、催化、成核、长大、中毒、凝聚成粒和连接成线的循环过程,正是由于碳源和催化剂的连续供应促成了碳纳米管阵列的快速定向生长。