High vertical breakdown strength in with low specific on‐resistance AlGaN/AlN/GaN HEMTs on silicon

Off‐state and vertical breakdown characteristics of AlGaN/AlN/GaN high‐electron‐mobility transistors (HEMTs) on high‐resistivity (HR)‐Si substrate were investigated and analysed. Three‐terminal off‐state breakdown (BV_gd) was measured as a function of gate–drain spacing (L_gd). The saturation of BV_gd with L_gd is because of increased gate leakage current. HEMTs with L_gd = 6 µm exhibited a specific on‐resistance R_DS[ON] of 0.45 mΩ cm². The figure of merit (FOM = BV_gd²/R_DS[ON]) is as high as 2.0 × 10⁸ V² Ω^–1 cm^–2, the highest among the reported values for GaN HEMTs on Si substrate. A vertical breakdown of ～1000 V was observed on 1.2 µm thick buffer GaN/AlN grown on Si substrate. The occurrence of high breakdown voltage is due to the high quality of GaN/AlN buffer layers on Si substrate with reduced threading dislocations which has been confirmed by transmission electron microscopy (TEM). This indicates that the AlGaN/AlN/GaN HEMT with 1.2 µm thick GaN/AlN buffer on Si substrate is promising candidate for high‐power and high‐speed switching device applications. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Electron mobility in the linear region of an AlGaN/AlN/GaN heterostructure field-effect transistor

We simulate the current-voltage （I-V） characteristics of AlGaN/AlN/GaN heterostructure field-effect transistors （HFETs） with different gate lengths using the quasi-two-dimensional （quasi-2D） model. The calculation results obtained using the modified mobility model are found to accord well with the experimental data. By analyzing the variation of the electron mobility for the two-dimensional electron gas （213EG） with the electric field in the linear region of the AlGaN/AlN/GaN HFET I-V output characteristics, it is found that the polarization Coulomb field scattering still plays an important role in the electron mobility of AlGaN/AlN/GaN HFETs at the higher drain voltage and channel electric field. As drain voltage and channel electric field increase, the 2DEG density reduces and the polarization Coulomb field scattering increases, as a result, the 2DEG electron mobility decreases.     

Analysis of strain relaxation process in GaInN/GaN heterostructure by in situ X‐ray diffraction monitoring during metalorganic vapor‐phase epitaxial growth

Strain relaxation in a GaInN/GaN heterostructure is analyzed by combining in situ X‐ray diffraction (XRD) monitoring and ex situ observations. Two different characteristic thicknesses of GaInN films are defined by the evolution of in situ XRD from the full width at half‐maximum of symmetric (0002) diffraction as a function of GaInN thickness. This in situ XRD measurement enables to clearly observe the critical thicknesses corresponding to strain relaxation in the GaInN/GaN heterostructure caused by the formation of surface pits with bent threading dislocations and the generation of misfit dislocations on GaInN during growth. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Normally-off AlGaN/GaN heterojunction field-effect transistors with in-situ AlN gate insulator

AlGaN/GaN heterojunction field-effect transistors (HFETs) with p-GaN cap layer are developed for normally-off operation, in which an in-situ grown AlN layer is utilized as the gate insulator. Compared with the SiN_x gate insulator, the AlN/p-GaN interface presents a more obvious energy band bending and a wider depletion region, which helps to positively shift the threshold voltage. In addition, the relatively large conduction band offset of AlN/p-GaN is beneficial to suppress the gate leakage current and enhance the gate breakdown voltage. Owing to the introduction of AlN layer, normally-off p-GaN capped AlGaN/GaN HFET with a threshold voltage of 4 V and a gate swing of 13 V is realized. Furthermore, the field-effect mobility is approximately 1500 cm²·V^-1·s^-1 in the 2DEG channel, implying a good device performance.     

Photo‐capacitance spectroscopy investigation of deep‐level defects in AlGaN/GaN hetero‐structures with different current collapses

We have investigated electronic deep levels in two AlGaN/GaN hetero‐structures with different current collapses grown at 1150 and 1100 °C by a photo‐capacitance spectroscopy technique, using Schottky barrier diodes. Three specific deep levels located at ～2.07, ～2.80, and ～3.23 eV below the conduction band were found to be significantly enhanced for severe current collapse, being in reasonable agreement with photoluminescence and capacitance–voltage characteristics. These levels probably originate in Ga vacancies and residual C impurities and are probably responsible for the current collapse phenomena of the AlGaN/GaN hetero‐structures. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effects of post-annealed floating gate on the performance of AlGaN/GaN heterostructure field-effect transistors

AlGaN/GaN heterostructure field-effect transistors(HFETs) with different floating gate lengths and floating gates annealed at different temperatures, are fabricated. Using the measured capacitance–voltage curves of the gate Shottky contacts for the AlGaN/GaN HFETs, we find that after floating gate experiences 600?C rapid thermal annealing, the larger the floating gate length, the larger the two-dimensional electron gas electron density under the gate region is. Based on the measured capacitance–voltage and current–voltage curves, the strain of the AlGaN barrier layer in the gate region is calculated, which proves that the increased electron density originates from the increased strain of the AlGaN barrier layer.     

Influence of Schottky drain contacts on the strained AlGaN barrier layer of AlGaN/AlN/GaN heterostructure field-effect transistors

Rectangular Schottky drain AlGaN/AlN/GaN heterostructure field-effect transistors (HFETs) with different gate contact areas and conventional AlGaN/AlN/GaN HFETs as control were both fabricated with same size. It was found there is a significant difference between Schottky drain AlGaN/AlN/GaN HFETs and the control group both in drain series resistance and in two-dimensional electron gas (2DEG) electron mobility in the gate-drain channel. We attribute this to the different influence of Ohmic drain contacts and Schottky drain contacts on the strained AlGaN barrier layer. For conventional AlGaN/AlN/GaN HFETs, annealing drain Ohmic contacts gives rise to a strain variation in the AlGaN barrier layer between the gate contacts and the drain contacts, and results in strong polarization Coulomb field scattering in this region. In Schottky drain AlGaN/AlN/GaN HFETs, the strain in the AlGaN barrier layer is distributed more regularly.     

阶梯AlGaN外延新型Al0.25Ga0.75N/GaNHEMTs器件实验研究

本文报道了作者提出的阶梯AlGaN外延层新型AlGaN/GaN HEMTs结构的实验结果. 实验利用感应耦合等离子体刻蚀(ICP)刻蚀栅边缘的AlGaN外延层, 形成阶梯的AlGaN 外延层结构, 获得浓度分区的沟道2DEG, 使得阶梯AlGaN外延层边缘出现新的电场峰, 有效降低栅边缘的高峰电场, 从而优化了AlGaN/GaN HEMTs器件的表面电场分布. 实验获得了阈值电压-1.5 V的新型AlGaN/GaN HEMTs器件. 经过测试, 同样面积的器件击穿电压从传统结构的67 V提高到新结构的106 V, 提高了58%左右; 脉冲测试下电流崩塌量也比传统结构减少了30%左右, 电流崩塌效应得到了一定的缓解.     

阶梯AlGaN外延新型Al_(0.25)Ga_(0.75)N/GaNHEMTs击穿特性分析

为了优化AlGaN/GaN HEMTs器件表面电场,提高击穿电压,本文首次提出了一种新型阶梯AlGaN/GaN HEMTs结构.新结构利用AlGaN/GaN异质结形成的2DEG浓度随外延AlGaN层厚度降低而减小的规律,通过减薄靠近栅边缘外延的AlGaN层,使沟道2DEG浓度分区,形成栅边缘低浓度2DEG区,低的2DEG使阶梯AlGaN交界出现新的电场峰,新电场峰的出现有效降低了栅边缘的高峰电场,优化了AlGaN/GaN HEMTs器件的表面电场分布,使器件击穿电压从传统结构的446 V,提高到新结构的640 V.为了获得与实际测试结果一致的击穿曲线,本文在GaN缓冲层中设定了一定浓度的受主型缺陷,通过仿真分析验证了国际上外延GaN缓冲层时掺入受主型离子的原因,并通过仿真分析获得了与实际测试结果一致的击穿曲线.     

Determination of the series resistance under the Schottky contacts of AlGaN/AlN/GaN Schottky barrier diodes

Rectangular AlGaN/AlN/GaN heterostructure field-effect transistors (HFETs) were fabricated, and the gate and the source of the HFETs consisted of AlGaN/AlN/GaN Schottky barrier diodes (SBDs). Based on the measured forward current-voltage and the capacitance-voltage characteristics of the AlGaN/AlN/GaN SBDs, the series resistance under the Schottky contacts (R_S) was calculated using the method of power consumption, which has been proved to be valid. Finally, the method of power consumption for calculating R_S was successfully used to study the two-dimensional electron gas electron mobility for a series of circular AlGaN/AlN/GaN SBDs. It is shown that the series resistance under the Schottky contacts cannot be neglected and is important for analysing and characterizing the AlGaN/AlN/GaN SBDs and the AlGaN/AlN/GaN HFETs.     

Growth by molecular beam epitaxy of AlGaN/GaN high electron mobility transistors on Si-on-polySiC

We report on the growth by molecular beam epitaxy of AlGaN/GaN high electron mobility transistors (HEMTs) on Si(111)/ SiO₂/polySiC substrates. The structural, optical, and electrical properties of these films are studied and compared with those of heterostructures grown on thick Si(111) substrates. Field effect transistors have been realized, and they demonstrate the potentialities of III–V nitrides grown on these advanced substrates.     

Investigations on AlGaN‐Based Deep‐Ultraviolet Light‐Emitting Diodes With Si‐Doped Quantum Barriers of Different Doping Concentrations

In this work, we investigate the impact of Si doped AlGaN quantum barriers on the optical powers for [0001] oriented III‐nitride based deep‐ultraviolet light‐emitting diodes (DUV LEDs). The polarization‐induced electric field in the active region is screened as the result of Si‐doped quantum barriers, which gives rise to the improved spatial overlap between electron and hole wave functions. The polarization screening effect within the quantum wells is further proven by the observation of the blue shift for the wavelength. However, the hole distribution across the active region can be significantly retarded if the Si dosage in the quantum barriers is too high. Therefore, the improved radiative recombination within the active region can be realized provided that the Si dosage in the quantum barriers is moderately adjusted to guarantee both the better hole injection efficiency and the screened polarization effect in the multiple quantum wells.     

具有部分本征GaN帽层新型AlGaN/GaN高电子迁移率晶体管特性分析

为了优化传统Al GaN/GaN高电子迁移率晶体管(high electron mobility transistors,HEMTs)器件的表面电场,提高击穿电压,本文提出了一种具有部分本征GaN帽层的新型Al GaN/GaN HEMTs器件结构.新型结构通过在Al GaN势垒层顶部、栅电极到漏电极的漂移区之间引入部分本征GaN帽层,由于本征GaN帽层和Al GaN势垒层界面处的极化效应,降低了沟道二维电子气(two dimensional electron gas,2DEG)的浓度,形成了栅边缘低浓度2DEG区域,使得沟道2DEG浓度分区,由均匀分布变为阶梯分布.通过调制沟道2DEG的浓度分布,从而调制了Al GaN/GaN HEMTs器件的表面电场.利用电场调制效应,产生了新的电场峰,且有效降低了栅边缘的高峰电场,Al GaN/GaN HEMTs器件的表面电场分布更加均匀.利用ISE-TCAD软件仿真分析得出:通过设计一定厚度和长度的本征GaN帽层,Al GaN/GaN HEMTs器件的击穿电压从传统结构的427 V提高到新型结构的960 V.由于沟道2DEG浓度减小,沟道电阻增加,使得新型Al GaN/GaN HEMTs器件的最大输出电流减小了9.2%,截止频率几乎保持不变,而最大振荡频率提高了12%.     

Optical isotropization of anisotropic wurtzite Al‐rich AlGaN via asymmetric modulation with ultrathin (GaN)m/(AlN)n superlattices

Symmetric anisotropy in wurtzite semiconductors, e.g., AlGaN, has led to the significant optical anisotropy that is rather difficult to resolve. Here, a novel scheme for achieving optical isotropization in Al‐rich AlGaN through the introduction of additional asymmetric elements is demonstrated to compensate the native asymmetry. Asymmetric modulation of alloy composition and periodicity of (GaN)_m/(AlN)_n superlatices was proposed with first‐principles simulations. Results showed that the compensation for the c‐axial symmetry with the asymmetric ultrathin (GaN)_m/(AlN)_n superlatices (m ≤ 2) could well achieve the equivalence of the ordinary and extraordinary imaginary dielectric functions ε₂ at the band edge. Measurement with spectroscopic ellipsometry for this (GaN)_m/(AlN)_n superlatice insertion in AlGaN host confirmed the theoretical predictions of the optical isotropization. This method can be transferred to other semiconductors in anisotropic structure and with troubles of optical anisotropy.     

Improvement of breakdown characteristics of an A1GaN/GaN HEMT with a U-type gate foot for millimeter-wave power application

<正>In this study,the physics-based device simulation tool Silvaco ATLAS is used to characterize the electrical properties of an AlGaN/GaN high electron mobility transistor(HEMT) with a U-type gate foot.The U-gate AlGaN/GaN HEMT mainly features a gradually changed sidewall angle,which effectively mitigates the electric field in the channel, thus obtaining enhanced off-state breakdown characteristics.At the same time,only a small additional gate capacitance and decreased gate resistance ensure excellent RF characteristics for the U-gate device.U-gate AlGaN/GaN HEMTs are feasible through adjusting the etching conditions of an inductively coupled plasma system,without introducing any extra process steps.The simulation results are confirmed by experimental measurements.These features indicate that U-gate AlGaN/GaN HEMTs might be promising candidates for use in miltimeter-wave power applications.     

The effect of single A1GaN interlayer on the structural properties of GaN epilayers grown on Si （111） substrates

High-quality and nearly crack-free GaN epitaxial layer was obtained by inserting a single AlGaN interlayer between GaN epilayer and high-temperature AlN buffer layer on Si (111) substrate by metalorganic chemical vapor deposition. This paper investigates the effect of AlGaN interlayer on the structural properties of the resulting GaN epilayer. It confirms from the optical microscopy and Raman scattering spectroscopy that the AlGaN interlayer has a remarkable effect on introducing relative compressive strain to the top GaN layer and preventing the formation of cracks. X-ray diffraction and transmission electron microscopy analysis reveal that a significant reduction in both screw and edge threading dislocations is achieved in GaN epilayer by the insertion of AlGaN interlayer. The process of threading dislocation reduction in both AlGaN interlayer and GaN epilayer is demonstrated.     

Ni/Au Schottky gate oxidation and BCB passivation for high-breakdown-voltage AlGaN/GaN HEMT

A new AlGaN/GaN high electron mobility transistor (HEMT) employing Ni/Au Schottky gate oxidation and benzocyclobutene (BCB) passivation is fabricated in order to increase a breakdown voltage and forward drain current. The Ni/Au Schottky gate metal with a thickness of 50/300 nm is oxidized under oxygen ambient at 500 C and the highly resistive NiO is formed at the gate edge. The leakage current of AlGaN/GaN HEMTs is decreased from 4.94 μA to 3.34 nA due to the formation of NiO. The BCB, which has a low dielectric constant, successfully passivates AlGaN/GaN HEMTs by suppressing electron injection into surface states. The BCB passivation layer has a low capacitance, so BCB passivation increases the switching speed of AlGaN/GaN HEMTs compared with silicon nitride passivation, which has a high dielectric constant. The forward drain current of a BCB-passivated device is 199 mA /mm, while that of an unpassivated device is 172 mA /mm due to the increase in two-dimensional electron gas (2DEG) charge.     

AlGaN/GaN HEMTs grown on silicon (001) substrates by molecular beam epitaxy

We report the realization of an AlGaN/GaN HEMT on silicon (001) substrate with noticeably better transport and electrical characteristics than previously reported. The heterostructure has been grown by molecular beam epitaxy. The 2D electron gas formed at the AlGaN/GaN interface exhibits a sheet carrier density of 8×10¹² cm⁻² and a Hall mobility of 1800 cm²/V s at room temperature. High electron mobility transistors with a gate length of 4 μm have been processed and DC characteristics have been achieved. A maximum drain current of more than 500 mA/mm and a transconductance g_m of 120 mS/mm have been obtained. These results are promising and open the way for making efficient AlGaN/GaN HEMT devices on Si(001).     

60Co γ射线辐射对AlGaN/GaN HEMT器件的影响

采用⁶⁰Co γ射线辐射源对非钝化保护的AlGaN/GaN高电子迁移率晶体管(HEMT)器件进行了1 Mrad(Si)的总剂量辐射,实验发现辐射累积剂量越大,器件尺寸越小,器件饱和漏电流和跨导下降越明显,同时辐射后器件栅泄漏电流明显增大,而阈值电压变化很小. 对辐射前后器件的沟道串联电阻和阈值电压变化的分析表明,辐射感生表面态负电荷的产生是造成AlGaN/GaN HEMT器件电特性退化的主要原因之一. 关键词： AlGaN/GaN HEMT器件 γ射线辐射 表面态     

AlGaN/GaN 高电子迁移率晶体管漏电流退化机理研究

本文首先制备了与AlGaN/GaN高电子迁移率晶体管 (HEMT) 结构与特性等效的AlGaN/GaN异质结肖特基二极管, 采用步进应力测试比较了不同栅压下器件漏电流的变化情况, 然后基于电流-电压和电容-电压测试验证了退化前后漏电流的传输机理, 并使用失效分析技术光发射显微镜 (EMMI) 观测器件表面的光发射, 研究了漏电流的时间依赖退化机理. 实验结果表明: 在栅压高于某临界值后, 器件漏电流随时间开始增加, 同时伴有较大的噪声. 将极化电场引入电流与电场的依赖关系后, 器件退化前后的 log(I_FT/E)与√E 都遵循良好的线性关系, 表明漏电流均由电子Frenkel-Poole (FP) 发射主导. 退化后 log(I_FT/E)与√E 曲线斜率的减小, 以及利用EMMI在栅边缘直接观察到了与缺陷存在对应关系的“热点”, 证明了漏电流退化的机理是: 高电场在AlGaN层中诱发了新的缺陷, 而缺陷密度的增加导致了FP发射电流I_FT的增加. 关键词： AlGaN/GaN 高电子迁移率晶体管 漏电流 退化机理