Eu~(3+):Y_2O_3纳米微粒的尺寸效应和表面态效应的研究

通过相同掺杂浓度但不同颗粒尺寸的Ｅｕ：Ｙ２Ｏ３纳米晶，和相同颗粒尺寸但掺杂浓度不同的纳米晶的发 光衰减曲线研究了表面态和限域作用对能量传递的影响。纳米晶与体材料相比，有更高的猝灭浓度，分析了纳 米材料中发光中心的猝灭浓度提高的原因。由于纳米材料与体材料相比，纳米晶中的缺陷密度很小，纳米晶中 有较少的体猝灭中心。选择合适的颗粒尺寸并对其进行表面修饰，将获得较高发光效率和较高的猝灭浓度。     

Eu^3＋：Y2O3纳米微粒的尺寸效应和表面态效应的研究

通过相同掺杂浓度但不同颗粒尺寸的Ｅｕ：Ｙ２Ｏ３纳米晶，和相同颗粒尺寸但掺杂浓度没的纳米晶的发光衰减曲线研究了表面态和限域作用对能量传递的影响。纳米晶与体材料相比，有更高的猝灭浓度，分析了纳米材料中发光中心的猝灭浓度提高的原因。由于纳米材料与体材料相比，纳米晶中的缺陷密度很小，纳米晶中有较少的体猝灭中心。选择合适的颗粒尺寸并对其进行表面修饰，将获得较高发光效率和较高的猝灭浓度。     

Y_2O_3纳米晶体中Ln~(3+)(Ln=Tb,Tm,Eu)发光浓度猝灭及能量传递的研究

采用燃烧法制备了不同Ln3+(Ln=Tb,Tm,Eu)掺杂浓度和不同粒径的Y2O3:Im纳米晶体粉末样品,并通过高温退火获得了相应掺杂浓度的体材料样品.测量了纳米和体材料样品的发射光谱、XRD谱并拍摄了不同粒径样品的TEM照片.研究了纳米Y2O3:Ln晶体粉末中发光中心的浓度猝灭现象和不同发光中心之间的能量传递行为.研究发现,在Y2O3纳米晶体粉末中,Tb3:5D4→7F5和Eu3+:5D0→7F2发光的浓度猝灭与体材料中相似,而Tb3+:5D3→7F5和Tm3+:1D2→3H4发光的猝灭浓度明显高于体材料.这是因为纳米微晶的界面会阻止能量传递的进行,产生较强的尺寸限制效应,抑制发光材料中发光中心之间能量传递的进行,但不同类型的能量传递对粒径尺寸变化的依赖关系不同.尺寸限制效应对长程相互作用类型的能量传递(如电偶极一电偶极相互作用)的抑制作用明显,对短程相互作用类型的能量传递(如交换相互作用)的影响较小.     

Y2O2S纳米晶中Tb3+发光的浓度猝灭

制备了Tb^3 浓度不同而粒径相同的一系列纳米晶Y2O2S。由于表面态对发光的猝灭作用,Tb^3 离子^5D3发光的寿命与体材料比较明显缩短,研究了^5D3和^5D4能级发光的浓度猝灭,发光强度与浓度的关系以及发光的衰减曲线都表明：^5D3的浓度猝灭是电偶极－电偶极相互作用引起的,而^5D4的浓度猝灭是交换相互作用引起的。     

核壳结构纳米颗粒Gd2O3:Tb3+/SiOx的制备及发光性能研究

以二甘醇为溶剂合成Gd2O3:Tb3+纳米颗粒,并在其表面包覆聚硅氧烷层,得到核壳结构纳米颗粒Gd2O3∶Tb3+/SiOx。为了研究Tb3+离子掺杂浓度对纳米颗粒发光性能的影响,采用几种不同Tb3+掺杂浓度进行纳米颗粒的合成,并对其发光性能进行了检测。结果表明:包裹聚硅氧烷层后的Gd2O3∶Tb3+纳米颗粒分散较好,聚硅氧烷层不会减弱Gd2O3∶Tb3+纳米颗粒的发光性能。Tb3+掺杂浓度对核壳结构纳米颗粒Gd2O3∶Tb3+/SiOx的发光存在浓度猝灭现象,猝灭摩尔分数为5%。这种具有发光特性的核壳结构纳米颗粒可作为生物传感器的探针用于生物分子的检测。     

不同壳层厚度的LaF_3∶Eu~(3+)/LaF_3核壳结构纳米颗粒制备及发光性质

表面缺陷会使纳米材料的发光中心产生严重的猝灭,而适当厚度的同质包覆层会减少其猝灭。本文利用共沉淀法合成了LaF3∶Eu3+纳米颗粒和LaF3∶Eu3+/LaF3核壳结构纳米颗粒,研究了颗粒的晶体结构、形貌以及不同壳层厚度对发光性能的影响。研究发现:LaF3∶Eu3+核心和LaF3∶Eu3+/LaF3核壳结构均为六方结构。包覆同质壳层可以提高稀土离子的发光性能,包覆厚度的不同导致LaF3∶Eu3+/LaF3核壳结构的荧光强度与衰减时间均发生改变。其原因是未掺杂的LaF3壳层可以将发光中心Eu3+离子与LaF3∶Eu3+核心的表面隔离,进而减少表面对发光中心的猝灭,提高材料的发光性能。这种修饰作用与壳层厚度相关。     

纳米Y2—xSi2O7：Eux的发光特性及浓度猝灭研究

报道了用溶胶－凝胶法合成粒径约５０ｎｍ的系列掺杂浓度Ｙ２－ｘＳｉ２Ｏ７：Ｅｕ纳米晶体及相应的常规尺度的粉末材料,通过测定它们的激光光谱和发射光谱研究了它们的发光牧场生,并由一系列不同掺杂浓度样品的发射谱强度变化曲线得到猝灭浓度的值。结果表明,低掺杂浓度时纳米晶体有就有较高的发光亮度;且与体材料相比,纳米晶体且晚高的发光猝浓度。     

Y2O3:Eu纳米晶中能量传递相互作用的研究

通过浓度猝灭曲线确定了引起Y₂O₃纳米晶中Eu³⁺发光浓度猝灭的是交换相互作用.测量了两种颗粒尺寸下Eu³⁺的⁵D₀—⁷F₂跃迁发光衰减曲线随掺杂浓度的变化,利用交换相互作用的理论衰减曲线对实验衰减曲线进行拟合.计算Eu³⁺离子的交换相互作用能量传递的效率,分析了Y₂O_{3关键词： 能量传递 2}O₃Eu纳米晶')" href="#">Y₂O₃Eu纳米晶 发光衰减     

不同壳层厚度的LaF3：Eu3+/LaF3核壳结构纳米颗粒制备及发光性质

表面缺陷会使纳米材料的发光中心产生严重的猝灭，而适当厚度的同质包覆层会减少其猝灭。本文利用共沉淀法合成了LaF₃：Eu³⁺纳米颗粒和LaF₃：Eu³⁺/LaF₃核壳结构纳米颗粒，研究了颗粒的晶体结构、形貌以及不同壳层厚度对发光性能的影响。研究发现：LaF₃：Eu³⁺核心和LaF₃：Eu³⁺/LaF₃核壳结构均为六方结构。包覆同质壳层可以提高稀土离子的发光性能，包覆厚度的不同导致LaF₃：Eu³⁺/LaF₃核壳结构的荧光强度与衰减时间均发生改变。其原因是未掺杂的LaF₃壳层可以将发光中心Eu³⁺离子与LaF₃：Eu³⁺核心的表面隔离，进而减少表面对发光中心的猝灭，提高材料的发光性能。这种修饰作用与壳层厚度相关。     

用于液体激光介质的Nd~(3+)离子掺杂氟化镧纳米颗粒的制备与性能表征

设计并合成了掺杂不同Nd3+离子浓度的氟化镧纳米颗粒,并用油酸进行了表面修饰,使得这类纳米颗粒可分散于常见的有机溶剂中形成透明、均一、稳定的溶液。对纳米颗粒的结构、晶相以及发光性能进行了表征。固体和溶液材料在1 060 nm都有强的发射峰,说明纳米晶格可有效地保护Nd3+离子免受外界环境对发光的猝灭影响。纳米颗粒有机溶液的吸收损耗和散射损耗测试结果表明,其总损耗系数能够满足激光介质材料的损耗要求,为该材料的实用化打下了基础。     

Fine structure and isotope shift of the 3s4d 3 D-3s3p 3 P, 3s5d 3 D-3s3p 3 P and 3p 2 3 P-3s3p 3 P Transitions of MgI

Summary We report the measurements of the³ D(3s4d)-³ P(3s3p)³ D(3s5d)-³ P(3s3p), and³ P(3p ²)-³ P(3s3p) transition frequency of MgI, the fine-structure separation and isotope shift between²⁴Mg and²⁶Mg. The measurements have been performed in a metastable atomic beam; a good agreement is found for data already existing in the literature. The accuracy of the measurements reported in this paper is mainly limited by the Doppler broadening of theI ₂ transitions used as a reference and by the precision in the knowledge of the related wavelengths.     

The gas phase infrared band contours of s-triazine and s-triazine-d3: The fundamentals of C3N3H3 and C3N3D3 and some overtone and combination bands of C3N3H3

The systematic application of band contour techniques to account for most of the observed features of the ir spectra of s-triazine and s-triazine-d₃ have been made as well as a critique as to the limitations of such methods. The experimental and computer methods used to study the gas phase infrared band contours of s-triazine and s-triazine-d₃ are out-lined. Contours of the five E′ fundamentals of s-triazine have been recorded under moderate resolution and analyzed to give the Coriolis constants $\text{ζ}{}_{\mathrm{i}}{}^{\mathrm{z}}$, i = 6–10. The effects of l-resonance are very apparent for ν₈ and ν₉, in the form of holes in the Q branches of these bands. Under the highest resolution available, ν₆ and ν₁₀ also show l-resonance effects. Values of the l-doubling constants $\text{q}{}_{\mathrm{i}}{}^{\mathrm{(+)}}$ were obtained for these four fundamentals. One of the parallel A₂″ fundamentals of C₃H₃N₃ (ν₁₂) has also been studied. It lies close to ν₁₀(E′) and an A × E type of second-order Coriolis resonance may be the cause of the intensity enhancement observed in the inner wings of the ν₁₂ and ν₁₀ bands. Hot bands of the type (ν_i + nν₁₄ ? nν₁₄) have been observed in the contours of ν₈, ν₁₀, and ν₁₂. This is felt to be responsible for the large difference between our observed zeta sum (?1.30) and the theoretical sum (?1.00).The gas phase infrared band contours of the five E′ and 2A₂″ fundamentals of C₃N₃D₃ have also been recorded under moderate resolution. From P-R separations and by computer simulation of the contours, values of the Coriolis constants $\text{ζ}{}_{\mathrm{i}}{}^{\mathrm{z}}$ have been obtained for the E′ modes. The effects of l-resonance have been observed for ν₈(E′) and ν₁₀(E′) and values of the l-doubling constants $\text{q}{}_{\mathrm{i}}{}^{\mathrm{(+)}}$ have been estimated. An extensive series of hot bands of the type (ν₁₂ + nν₁₄ ? nν₁₄) has been observed in the contour of the ν₁₂ (A₂″) fundamental. The mass effect on the Coriolis constants has been discussed.Infrared band contours of the overtone 2ν₇ and seven degenerate E′ combination bands of C₃N₃H₃ have been recorded under moderate resolution. Analysis of these contours using the P-R separation method and computer simulation of the contours has given values of $\text{ζ}{}_{\mathrm{<mtext>eff</mtext>}}{}^{\mathrm{z}}$ for these bands. Fermi resonance between 2ν₇ and ν₆ has been analyzed. The importance of considering both the observed contour as well as the observed frequency when assigning higher tone bands is illustrated.     

Infrared spectra of matrix isolated BH3NH3, BD3ND3, and BH3ND3

The infrared spectra of ammonia-borane, BH₃NH₃, and two of its deuterated isotropic species, BD₃ND₃ and BH₃ND₃, isolated in argon matrix at liquid hydrogen temperature have been measured. Well resolved bands for these three isotopic species have been observed for all the fundamentals. A complete frequency assignment based on C₃v molecular symmetry has been made. A set of force constants have been calculated from the data for the two isotopes BH₃NH₃ and BD₃ND₃ using a valence force field. The agreement between experiment and frequencies calculated from these force constants for the mixed isotopic species, BH₃ND₃, substantiates the present assignment.     

Dielectric investigations of solid solutions SrTiO3-KTaO3 and SrTiO3-KNbO3

The temperature dependences of the dielectric constant and dielectric hysteresis loops in ceramic samples of (1 ? x)SrTiO_3?x KNbO₃ and (1 ? x)SrTiO_3?x KTaO₃ (0 ≤ x ≤ 0.3) solid solutions prepared using different heat treatments have been investigated. Phase diagrams of the studied solid solutions have been constructed in the T-x coordinates. It has been shown that, after quenching of samples (spontaneous cooling at room temperature after long-term heating at the sintering temperature of the ceramic samples), the temperature of the induced phase transition increases because of the weakening of random electric fields associated with nonisovalent impurities due to their “frozen” nonequilibrium redistribution. For small concentrations x, strong dielectric relaxation is observed in the temperature range of 150–250 K. A model of relaxing centers, which is based on the local charge compensation of heterovalent impurities, has been proposed.     

LaGaO3:RE3+(RE3+=Eu3+,Ho3+)的光谱

本文用固态反应合成了钙钛矿型的LaGaO3和LaGaO3:RE3+(RE3+=Eu3+,Ho3+)荧光体,并观察了物相随不同的激活离子浓度的变化。测量了化合物在室温下的反射光谱,激发光谱和荧光光谱。研究了Eu3+的D0→7F2和Ho3+的5S2→5I8的荧光强度与激活离子浓度的关系,发现了浓度猝灭,并得到了最大荧光强度的浓度值。     

Terahertz Vibrational Modes in CH3NH3PbI3 and CsPbI3 Perovskite Films

JETP Letters - Films of CH3NH3PbI3 organometallic perovskite, which is currently considered as a promising basic material for new-generation solar cells, as well as films containing CsPbI3...     

Ba3La(BO3)3基质中Tb3+的光致发光

以高温固相法合成了Ba3La(BO3)3∶Tb3 发光材料。在254nm紫外光激发下,研究了Ba3La(BO3)3∶Tb3 的激发光谱、发射光谱、发光强度与Tb3 浓度的关系。确定了Ba3La(BO3)3基质中Tb3 的自身浓度猝灭机理;探讨了助熔剂LiCO、敏化剂Ce3 、Bi3 的加入对荧光粉的发光强度的影响。     

Modulated magnetic structures of ErPb3, HoPb3, ErTl3 and HoTl3

Neutron diffraction experiments have been carried out on the magnetically ordered phases of ErPb₃, HoPb₃, ErTl₃ and HoTl₃. The magnetic moments were found to be sinusoidally modulated with a propagation vector of (0, 0.2, 0.5) for the Pb-compounds and (0.38, 0.38, 0.16) for the Tl-compounds.Work supported by the Bundesministerium für Forschung und Technologie     

O_3 fast and simple treatment-enhanced p-doped in Spiro-MeOTAD for CH_3NH_3I vapor-assisted processed CH_3NH_3PbI_3 perovskite solar cells

We demonstrate a simple and fast post-deposition treatment with high process compatibility on the hole transport material(HTM) Spiro-MeOTAD in vapor-assisted solution processed methylammonium lead triiodide(CH_3NH_3PbI_3)-based solar cells. The prepared Co-doped p-type Spiro-MeOTAD films are treated by O_3 at room temperature for 5 min,10 min, and 20 min, respectively, prior to the deposition of the metal electrodes. Compared with the traditional oxidation of Spiro-MeOTAD films overnight in dry air, our fast O_3 treatment of HTM at room temperature only needs just 10 min,and a relative 40.3% increment in the power conversion efficiency is observed with respect to the result of without-treated perovskite solar cells. This improvement of efficiency is mainly attributed to the obvious increase of the fill factor and short-circuit current density, despite a slight decrease in the open-circuit voltage. Ultraviolet photoelectron spectroscopy(UPS) and Hall effect measurement method are employed in our study to determine the changes of properties after O_3 treatment in HTM. It is found that after the HTM is exposed to O_3, its p-type doping level is enhanced. The enhancement of conductivity and Hall mobility of the film, resulting from the improvement in p-doping level of HTM, leads to better performances of perovskite solar cells. Best power conversion efficiencies(PCEs) of 13.05% and 16.39% are achieved with most properly optimized HTM via CH_3NH_3I vapor-assisted method and traditional single-step method respectively.