量子Turbo乘积码

量子通信是经典通信和量子力学相结合的一门新兴交叉学科.量子纠错编码是实现量子通信的关键技术之一.构造量子纠错编码的主要方法是借鉴经典纠错编码技术,许多经典的编码技术在量子领域中都可以找到其对应的编码方法.针对经典纠错码中最好码之一的Turbo乘积码,提出一种以新构造的CSS型量子卷积码为稳定子码的量子Turbo乘积码.首先,运用群的理论及稳定子码的基本原理构造出新的CSS型量子卷积码稳定子码生成元,并描述了其编码网络.接着,利用量子置换SWAP门定义推导出量子Turbo乘积码的交织编码矩阵.最后,推导出量子Turbo乘积码的译码迹距离与经典Turbo乘积码的译码距离的对应关系,并提出量子Turbo乘积码的编译码实现方案.这种编译码方法具有高度结构化,设计思路简单,网络易于实施的特点. 关键词： CSS码 量子卷积码 量子Turbo乘积码 量子纠错编码     

基于六光子量子避错码的量子密钥分发方案

量子信道中不可避免存在的噪声将扭曲被传输的信息,对通信造成危害。目前克服量子信道噪声的较好方案是量子避错码（QEAC）。将量子避错码思想用于量子密钥分发,能有效克服信道中的噪声,且无需复杂的系统。用六光子构造了量子避错码,提出了一种丛于六光子避错码的量子密钥分发（QDK）方案。以提高量子密钥分发的量子比特效率和安全性为前提,对六光子避错码的所有可能态进行组合,得到一种六光子避错码的最优组合方法,可将两比特信息编码在一个态中,根据测肇结果和分组信息进行解码,得到正确信息的平均概率为7／16。与最近的基于四光子避错码的克服量子信道噪声的量子密钥分发方案相比,该方案的量子比特效率提高了16．67％,密钥分发安全性足它的3．5倍。     

采用纠缠辅助量子LDPC码和检错重传策略的量子直传通信方案

针对现有量子信息直传协议在有噪音量子信道下传输效率低及可靠性差的问题,提出了一种有效利用纠缠资源的量子安全直传通信方案.通过收发双方共享纠缠粒子作为辅助比特,采用纠缠辅助量子低密度校验码对量子态信息进行前向纠错保护,以提高系统在噪音环境下的传输可靠性.同时采用自动请求重传策略对量子态信息进行检错编码保护,当因窃听或强噪...     

量子Turbo码

量子纠错编码技术在量子通信和量子计算领域起着非常重要的作用.构造量子纠错编码的主要方法是借鉴经典纠错编码技术,目前几乎所有经典纠错编码方案都已经被移植到量子领域中来,然而在经典编码领域纠错性能最杰出的Turbo码却至今没有量子对应.提出了一种利用量子寄存器网络构造量子递归系统卷积码的简单实现方案,同时利用量子SWAP门设计了一种高效的量子交织器门组网络方案.最后仿照经典Turbo码的设计原理提出串行级联的量子Turbo码,同时提出了可行的译码方法.量子Turbo码不仅丰富了量子纠错码研究的领域,同时为解释 关键词： 量子递归系统卷积码 量子Turbo码 量子纠错编码 量子信息     

单向量子密钥纠错协议的纠错性能仿真分析

高效误码纠错是量子密钥分配后续数据处理的关键技术之一.基于汉明码校验子级联单向一次通信纠错方案, 分别对三种校验子级联纠错能力进行了理论和仿真分析.根据分析结果提出了一种基于混合校验子级联纠错协议, 通过优化纠错流程相关参数提高密钥生成效率.随后对该协议的纠错能力及其密钥生成效率进行了仿真分析, 最后根据误码率后验分布参数, 对密钥最终误码率及其置信区间进行了估计.单一校验子级联纠错仿真结果显示:在相同的纠错能力的条件下, 初始误码率为3% < p ≤ 11% 时, (7, 4)汉明码纠错的密钥生成效率最高;初始误码率为1.5% < p ≤ 3.0% 时, (15, 11)汉明码纠错的密钥生成效率最高;初始误码率为p ≤ 1.5% 时, (31, 26) 汉明码纠错的密钥生成效率最高.混合校验子级联纠错方案的仿真结果显示:对于初始误码率为9.50%, 经过8轮次混合校验子级联纠错, 密钥生成效率为9.94%, 误码率期望值为5.21×10^-12, 置信度为90%的上限值为2.85×10^-11, 相比用单一(7, 4)校验子级联纠错的密钥生成效率提高了约3倍. 关键词： 量子密钥分配 保密纠错 效率分析     

基于伪态协议的量子密钥分配系统研究

采用包含两个伪态和一个信号态的双伪态协议分析了量子密钥分配系统的性能,比较了双伪态（真空态—弱伪态）和单伪态协议条件下密钥生成率与通信距离的关系,分析了信号态的强度、量子比特误码率、单光子的增益和单光子的误码率对系统密钥生成率的影响,得出密钥生成率的最优化条件,为实现实用安全的量子密钥分配系统奠定理论基础. 关键词： 伪态协议 量子密钥生成率 量子比特误码率     

基于GHZ态的身份认证与密钥分配方案

在量子密钥分配协议中存在这样一个基本假设,即攻击者不能同时获得量子信道和经典信道上的信息;为解决这一假设性难题,对量子的纠缠特性进行了研究,提出一种基于GHZ三重态的身份认证与密钥分配方案,该方案在建立一次量子信道后利用GHZ三粒子的关联性实现通信双方与仲裁第三方三者之间的身份认证,然后利用远程传态实现通信密钥分配以及新认证密钥的分配,确保通信方身份不可伪造与通信信息安全,最后结合常见的攻击方式论证了该方案的安全性。     

量子计算纠错取得突破性进展

谷歌团队利用超导量子芯片,实现了两种规模的量子纠错表面码,利用辅助比特进行多次测量和初始化操作进行纠错,表明使用更多量子比特表面码的逻辑比特,其性能表现更好,达到了量子纠错规模化的盈亏平衡点,本文简要回顾量子纠错的机制,讨论谷歌量子纠错结果的意义,以及系列量子纠错进展,最后将展望量子计算的发展方向.     

量子密钥分发与量子安全直接通信

量子通信具有高安全性等优点,是当前的国际研究前沿,量子安全直接通信和量子密钥分发是两种重要的量子信息方式.量子密钥分发通过量子信道产生随机的密钥,而量子安全直接通信直接在量子信道中传输秘密信息.本文力图利用浅显易懂的语言介绍量子安全直接通信和量子密钥分发的基本原理;重点描述几个典型的量子安全直接通信方案,介绍目前的发展状态并展望未来.     

基于旋转不变态的测量设备无关量子密钥分配协议研究

本文提出了一种基于旋转不变态的偏振无关测量设备量子密钥分配协议,既适用于偏振编码测量设备无关量子密钥分配系统,也应用于相位编码测量设备无关量子密钥分配系统的相干过程.通过在线偏振基进入信道传输前嵌入2块q玻片,使得在传输过程中将线偏振基转化为旋转不变的圆偏振基,而第三方对接收到的脉冲进行Bell态测量前,利用q玻片的算符可逆性,将圆偏振基还原为线偏振基进行测量,可以有效消除信道传输中偏振旋转导致的误码.本文分析了偏振无关的三诱骗态测量设备无关量子密钥分配系统的误码率,研究了密钥生成率与安全传输距离的关系,仿真结果表明,对于偏振编码测量设备无关量子密钥分配系统,该协议可以有效提高系统的最大安全通信距离,为实用的量子密钥分配实验提供了重要的理论参数.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.