金属包覆极化聚合物光波导的优化设计

按极化聚合物光波导器件的五层（金属－缓冲层－波导层－缓冲层－金属）对称模型，对于其金属包覆层的光学吸收所引起的光波传播损耗进行了理论分析和计算，给出了在单模条件下波导层和缓冲层折射率及其厚度之间的关系曲线，计算确定出单模极化聚合物光波导参数。     

On the propagation characteristics of metal clad waveguides with a quantum well

The electromagnetic modes of planar metal clad dielectric waveguides containing an n-doped quantum well (QW) are studied theoretically. Special attention is paid on the coupling between metal surface plasmons and intersubband plasmons and the manifestation of this coupling in the propagation characteristics of metal/QW/dielectric and multimode metal/QW/dielectric/metal waveguide structures. The results obtained indicate that the modification of the propagation characteristic induced by the above-mentioned coupling is substantial only in the case of metal/QW/dielectric waveguide structures.     

基于金属包覆磁性波导结构的磁光Bragg器件特性分析

使用金属包覆磁性波导中的磁光耦合理论分析了静磁表面波与导波光在金属／电介质／钇铁石榴石／钆镓石榴石结构中的磁光共线作用，讨论了金属覆层和斜向场对磁光模式转换效率的影响。计算表明，金属包覆波导可以提高磁光作用，通过调节金属覆层与磁性薄膜间距得到了比空气／4a铁石榴石／钆镓石榴石的传统三明治波导情形高8．7dB的模式转换效率；而同时优化偏置磁场方向和金属包覆波导参数，模式转换效率可以进一步提高5．25dB。因此，金属包覆波导可以用于提高磁光Bragg器件性能，在微波和光信息处理等方面具有广阔的应用前蒂。     

金属包层对称平面单轴晶体波导的模式场(Ⅱ)

对于晶体光轴平行于波导界面的结构,讨论了光在金属包层对称平面单轴晶体波导(波导层是单轴晶体,两个波导界面均为金属)内的传输特性.解析地得到了这种结构下波导模式场的精确解.模式场的性质因单轴晶体的性质不同而异.对于正单轴晶体,波导的主模是横电波,任何频率的光波均可激励该模式;当频率满足一定条件时,波导内传输单模,否则,将激励起高阶模式.高阶模既非TE波,也非TM波,而是两者耦合而成的混合模.对于负单轴晶体,波导的主模是一种混合模,该模式同样可被任何频率的光波所激励;当频率满足一定条件时,波导内传输单模,否则 关键词： 平面金属波导 单轴晶体 模式场 混合模     

亚波长金属波导的光传播和干涉特性研究

利用时域有限差分方法研究了亚波长金属波导TE波的传播特性和基于异常透射现象的干涉特性.对各种参量对驻波特性的影响及两列波导间的耦合特性进行了分析.研究发现,TE波在波导中传播时存在截止宽度,如果波导宽度小于截止宽度,TE波在波导中不能传播;如果波导宽度大于截止宽度,TE波的传播距离将随波导宽度变大而突然增加.当波导宽度达到或大于半波长时,TE波可以在波导中正常传播.金属波导的截止宽度与金属的吸收系数成正比.此外,由于光在亚波长金属波导透射时的异常透射现象,在亚波长金属波导中产生了TE波的干涉现象,能形成驻波.     

镀金属长周期光纤光栅的研究

提出了矢量法分析和数值计算相结合的方法求解复数域超越方程来得出具有金属外包层的光纤的基模，以及包层模的传输常量。对具有复数折射率(金属)外包层的圆柱形波导(光纤)进行了分析。得出了一些规律性的结论，以此为基础分析了金属外包层对长周期光纤光栅的影响，并做了相关的实验验证。     

Perturbation analysis of finitely clad optical waveguides and couplers

In calculating the modal characteristics of a finitely clad optical waveguide, if the wavelength is much shorter than the core of the waveguide, then the cladding of the waveguide can be assumed to be infinite. On the other hand, if the wavelength is much longer than the core, the core can be ignored. These two approximations, although simple and accurate in the two respective extreme cases, do not provide adequate information in the transition region, where many tapered devices are operated. To overcome this a novel perturbation method is devised, in which these two approximations are combined in such a way that a result that is accurate in all cases can be obtained. Analytical expressions based on this method for describing the dispersion characteristics of finitely clad slab waveguides and circular step-index fibres are derived and compared with other conventional approximations. The combined use of this method and the coupled-mode theory for the analysis of optical couplers is also described.     

Subwavelength confinement in an integrated metal slot waveguide on silicon

We demonstrate propagation losses of less than 0.8 dB/microm in a metal slot waveguide on silicon with a predicted confinement substantially below the optical wavelength (approximately 1.55 microm). We also show compact and efficient coupling of the high-confinement metal slot waveguide with a standard silicon dielectric waveguide with a coupling efficiency of approximately 2.5 dB per facet.     

Efficient second-harmonic generation in nonlinear plasmonic waveguide

We theoretically studied a nonlinear optical process in a hybrid plasmonic waveguide composed of a nonlinear dielectric waveguide and a metal film with a separation of a thin air gap. Owing to the hybridization effect of guided mode and surface plasmon polariton mode, this particular waveguide is able to confine the optical-field in a deep subwavelength scale together with low propagation loss. Based on this, efficient second-harmonic generations (SHG) were revealed at the fundamental wavelength of λ=1.55?μm with good field confinement. The SHG efficiency, as well as the coupling coefficient and mode area, were analyzed and discussed in detail with respect to the structural parameters.     

Theoretical study of polymeric metal clad optical waveguide polarizer

Planar optical waveguides consisting of thin dielectric films and buffer layers with metal cladding have been investigated theoretically. A computer program was written to calculate the exact zeroes of complex eigenvalue equation for TE and TM modes in multilayer metal clad waveguide polarizer. Numerical results and illustrations are given for Polycarbonate waveguide with other polymers as buffer and Al, Ag and Au as cladding metals at . It is also shown that, using thin (finite) films of metal produce more efficient polarizers as compared to semi-infinite metal films. Effect of low index buffer layer on attenuation of TM/TE modes is also investigated.     

Improved Gain Characteristics in Er3+-Doped Alumina (Al2O3) Channel Optical Waveguide Amplifiers for WDM Systems

Er3+-doped Al2O3 optical waveguides are analyzed both as single amplifiers and as elements of a 16-channel wavelength division multiplexing transmission system; their performance is compared with that from Er3+-doped SiO2 optical waveguide amplifiers. The amplifier model, based on propagation and population-rate equa tions, includes both uniform and pair-induced up-conversion mechanisms and is solved numerically by combining finite elements and the Runge-Kutta algorithm. The analysis showed that Er3+-doped Al2O3 waveguides exhibit much higher signal gains than Er3+-doped SiO2 waveguides and also that the use of Er3+-doped Al2O3 waveguides reduces the deleterious gain peaking effect, increasing the maximum transmission distance.     

金属覆盖介质波导在截止点附近的光学特性

本文提出一种适合于截止点附近计算含金属覆盖层介质波层的近似解析方法，详细；地讨论在截止点附近的光波导的模式传播特性 和光电调制特性，并结合有效折射率方法讨论了止型脊形波导调制器的截止条件。     

费米折射率波导的包层吸收模谱特性和溶液浓度传感研究

采用0.004AgNO3-0.996NaNO3混合熔融盐,用离子交换技术在德国B270光学玻璃上制备了费米折射率分布渐变波导,理论分析了费米折射率分布渐变波导的包层吸收模谱特性.导波损耗测试实验验证了解析结果.在此基础上,提出了一种用于液体包层吸收损耗测试的双样品盒串连的波导回路.测试结果证实表征溶液包层吸收特征的折射率虚部与溶液浓度之间具有十分显著的线性关系,测试灵敏度与波导的模式和波导参量有关,尤其与波导层厚度有非常敏感的关联性.利用这个关系传感测试了13种不同浓度的耐晒果绿染料水溶液样品的浓度,结果显示测试值与实际配制浓度值的均方差小于0.07%.     

各向异性内包层对双包层光纤特性影响的分析

提出了单轴各向异性材料为内包层，且其主轴沿光纤轴线（z轴）方向的双包层光纤模型，推出了矢量模特征方程，重点研究了主轴折射率比kcl对波导色散的影响，针对从矢量模特征方程求解波导色散因表达式极为复杂而无法直接求解的困难，提出了一种求解波导色散的有效方法，研究结果发现可以在不改变光波导结构参量的条件下，通过改变kcl可有效地改变光纤的波导色散，也分析了kcl、几何参量S、光学参量R对低次模的传输和截止特性的影响。研究结果为获得更为理想的色散补偿、色散平坦光纤及设计新型无源光器件提供了重要的依据。     

Plasmon mode transformation in modulated-index metal-dielectric slot waveguides

The concept of adiabatic mode transformation between silicon waveguide and surface plasmon-polariton modes in subwavelength metal-dielectric slots is investigated. The mode transformer consists of a modulated-index slot region, which is bound by two metal slabs. Using the design scheme, we will show that the optical dispersion of a modulated-index metal slot waveguide can be engineered well above the silicon light-line on a large wavelength region, allowing direct phase-matching between surface plasmon polaritons and traditional waveguide modes. Based on full-field, finite difference simulations, we demonstrate that reversible mode conversion can be achieved within submicrometer length scales.     

金属包覆有机聚合物波导色散特性的实验研究

采用角度扫描衰减全反射（ＡＴＲ）技术，对银金属膜包覆的ＤＲ－１／ＰＭＭＡ型有机聚合物波导的色散特性进行了实验研究，从各波长下衰减全反射共振吸收峰的位置和半宽度确定了波导相应模式的传播常数，实验结果与理论计算符合较好，说明银膜介电常数的虚部可作为微扰小量处理。     

Propagation properties of a modified surface plasmonic waveguide with an arc slot

We introduce a modified surface plasmonic waveguide with an arc slot. The dependences of distribution of energy flux density, effective index, propagation length and mode area of the symmetric mode supported by this waveguide on geometrical parameters and working wavelength are analysed by using the finite-difference frequency-domain (FDFD) method. Results show that the energy flux density distributes mainly in four corners which are formed by two arcs, and the closer to the corners it is, the stronger the energy flux density will be. The effective index, the propagation length and the mode area are influenced by geometrical parameters, including the width, the thickness and the arc radius of the surface plasmonic waveguide, as well as the working wavelength. It has been shown that the surface plasmonic waveguide with an arc slot has better propagation properties than the surface plasmonic waveguide with a straight slot. This work may be helpful for applying the slot surface plasmonic waveguide to integrated photonics.     

Optimization design of optical waveguide control by nanoslit-enhanced THz field

We discuss design issues of devices which were proposed recently [Opt. Lett. 37 (2012) 3903] for terahertz (THz) control of the propagation of an optical waveguide mode. The mode propagates through a nonlinear dielectric material placed in a metallic nanoslit illuminated by THz radiation. The THz field in the slit is strongly localized and thus significantly enhanced, facilitating nonlinear interactions with the dielectric waveguide material. This enhancement can lead to notable changes in the refractive index of the waveguide. The closer the waveguide is to the slit walls, the higher the nonlinear effects are, but with the cost of increasing propagation losses due to parasitic coupling to surface plasmon polaritons at the metal interfaces. We analyze several optical waveguide configurations and define a figure of merit that allows us to design the optimal configuration. We find that designs with less overlap of the THz and optical fields but also with lower losses are better than designs where both these parameters are higher. The estimated terahertz field incident onto the metallic nanoslit required to manipulate the waveguide mode has reasonable values which can be achieved in practice.     

High extinction ratio metal-insulator-semiconductor waveguide surface plasmon polariton polarizer

The attenuation characteristics of a multilayer metal clad GaAs-AlGaAs optical waveguide polarizer are theoretically investigated. The dispersion relations and field distribution of the multilayer structures are calculated for different geometrical parameters and material properties. The polarizer studied consists of a single mode finite/infinite metal clad GaAs-AlGaAs waveguide with a dielectric (SiO₂/Si₃N₄) buffer layer inserted between the metal and the waveguide.Conventionally, the TM polarized waves are found to exhibit an absorption peak at a particular buffer thickness (called critical buffer thickness).We shall show that the maximum TM absorption can be improved by a multiple factor up to 7 by choosing a buffer layer thicker than its critical value. This corresponds to an extinction ratio of 1470 dB for a polarizer length of 1 mm. Further, thicker buffers reduce the insertion losses and values as low as 0.1 dB can be obtained. The strong TM absorption in these structures is interpreted as resonant coupling of the guided mode to the lossy surface plasmon polariton supported by the thin metal film. Thicker buffer also reduces the TE losses (insertion losses) and hence increases the extinction ratio (ratio of TM to TE losses).This can be achieved by optimizing the buffer and the metal thicknesses. Another equally efficient polarizer can be designed by positioning a dielectric (same as buffer) layer (superstrate layer) above the metal film and then optimizing the buffer, metal and the superstrate thicknesses. We also show that the proposed polarizer with the superstrate layer is highly stable even when exposed to the extreme atmospheric changes.     

Characteristics analysis of hybrid plasmonic waveguide for low-loss lightwave guiding

It has been experimentally demonstrated that a low-loss guided hybrid mode is supported if a metal strip is embedded in a low index polymer layer surrounded by two high index slabs. In this paper, further numerical analyses on the guided hybrid modes are reported to fully elucidate the characteristics of the hybrid plasmonic waveguide. For a one-dimensional slab structure with a metal film of infinite width, simulation results exhibit that low-loss guided hybrid modes are associated with surface plasmon modes and dual dielectric slab modes. The optical properties of the guided modes are improved by increasing the field intensity which is confined into lossless dielectric layers by decreasing the metal film thickness and increasing the refractive index and thickness of the high-index slabs. The finite element method is used to investigate the lateral mode confinement of the optical guided modes by the corresponding metal strip. By reducing the metal film width, the guided modes are confined in the plane transverse to the direction of propagation and the characteristics are significantly improved. The hybrid plasmonic waveguide can be exploited for long-range propagation-based application such as optical interconnection.