Phase transition in Pd<Subscript>40</Subscript>Ni<Subscript>10</Subscript>Cu<Subscript>30</Subscript>P<Subscript>20</Subscript> bulk metallic glass under HP &; HT

The phase transitions in Pd₄₀Ni₁₀Cu₃₀P₂₀ bulk metallic glass (BMG) have been studied under high pressure and high temperature (HP & HT) by X-ray diffaction measurements with synchrotron radiation source. We found that the BMG underwent a phase transitions of amorphous-crystalline-amorphous at 10 GPa upon heating. The parallel experiments were carried out at 7 GPa, while we did not observe the amorphous-crystalline-amorphous transitions by increasing temperature. Quenching the melted BMG at 7 GPa, it was found that the phase crystallized from the melt differed from the primary phase crystallized from the starting amorphous solid upon heating suggesting there existed a distinct mechanism in two cases.     

Phase transition in Pd40Ni10Cu30P20 bulk metallic glass under HP & HT

The phase transitions in Pd40Ni10Cu30P20 bulk metallic glass (BMG) have been studied under high pressure and high temperature (HP & HT) by X-ray diffraction measurements with synchrotron radiation source. We found that the BMG underwent a phase transitions of amorphous-crystalline-amorphous at 10 GPa upon heating. The parallel experiments were carried out at 7 GPa, while we did not observe the amorphous-crystalline-amorphous transitions by increasing temperature. Quenching the melted BMG at 7 GPa, it was found that the phase crystallized from the melt differed from the primary phase crystallized from the starting amorphous solid upon heating, suggesting there existed a distinct mechanism in two cases.     

Phase transition in Pd_(40)Ni_(10)Cu_(30)P_(20) bulk metallic glass under HP & HT

Bulk metallic glass (BMG) can be regarded as a metallic solid with a frozen-in melt structure which lacks atomic periodicity. Generally, BMG is not in an internal equilib- rium state (IES) but may change to the IES when it obtains an appropriate energy to overcome the energy barrier. High pressure and temperature can be a driving force to cause various transitions in amorphous materials, such as a transition from the amor- phous to the crystalline[1―8] or from the crystalline to the amorp…     

Structural relaxation of Zr<Subscript>41</Subscript>Ti<Subscript>14</Subscript>Cu<Subscript>12.5</Subscript>Ni<Subscript>10</Subscript>Be<Subscript>22.5</Subscript> bulk metallic glass under high pressure

Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5 bulk metallic glass (BMG) is annealed at 573 K under 3 GPa and its structural relaxation is investigated by X-ray diffraction, ultrasonic study, compression as well as sliding wear measurements. It is found that after the ZrTiCuNiBe BMG sample was annealed under high pressure, the mechanical properties were improved. Moreover, theBMG with relaxed structure exhibits markedly different acoustic properties. These results are attributed to the fact that relaxation under high-pressure results in a microstructural transformation in the BMG.     

Effects of high-pressure heat treatment on the solid-state phase transformation and microstructures of Cu61.13Zn33.94Al4.93 alloys

The phase transformation activation energy of the Cu61.13Zn33.94Al4.93 alloys, which were treated at 4 GPa and 700℃ for 15 minutes, was calculated by means of differential scanning calorimetry curves obtained at various heating and cooling rates. Then, the effects of high-pressure heat treatments on the solid-state phase transformation and the microstructures of Cu61.13Zn33.94Al4.93 alloys were investigated. The results show that high-pressure heat treatments can refine the grains and can change the preferred orientation from (111) to (200) of α phase. Compared with the as-cast alloy, the sample with high-pressure heat treatment has finer grains, lower β′→β and β→β' transformation temperature and activation energy. Furthermore, we found that high cooling rate favours the formation of fine needle-like α phase in the range of 5-20℃/min.     

In situ high-pressure X-ray diffraction experiments and ab initio calculations of Co2P

In situ high-pressure experiments of Co2P are carried out by means of angle dispersive X-ray diffraction with diamond anvil cell technique. No phase transition is observed in the present pressure range up to 15 GPa at room temperature, even at high temperature and 15 GPa. Results of compression for Co2P are well presented by the second-order Birch-Murnaghan equation of state with V0 = 130.99(2)3 (1=0.1 nm) and K0 = 160(3) GPa. Axial compressibilities are described by compressional modulus of the axis: Ka = 123(2) GPa, Kb = 167(8) GPa and Kc = 220(7) GPa. Theoretical calculations further support the experimental results and indicate that C23-type Co2P is stable at high pressure compared with the C22-type phase.     

Photoluminescence properties of Sm-doped BaBr2 under hydrostatic pressure

Photoluminescence spectra of Sm²⁺-doped BaBr₂ have been measured under hydrostatic pressures up to 17 GPa at room temperature. In the low pressure range a red-shift of the broad 5d-4f transition of −145 cm⁻¹/GPa is observed. From 5 to 8 GPa a phase mixture of the initial orthorhombic phase and the high-pressure monoclinic phase gives rise to two 5d-4f bands, which are strongly overlapping. Above 8 GPa the crystal is completely transformed to its high-pressure phase where two different Sm²⁺ sites exist, but only one broad 5d-4f transition is detected. It exhibits a red-shift of −36 cm⁻¹/GPa. In addition, the line shifts of the ⁵D₀→⁷F_J (J=0, 1, 2) transitions are investigated. Linear shifts of −19 cm⁻¹/GPa for J=0, 2 and of −13 cm⁻¹/GPa for J=1 are observed in the pressure range from 0 to 5 GPa.     

Quasi-two-dimensional magnetism in (CnH2n+1NH3)2CuCl4 studied by electron paramagnetic resonance

The quasi-two-dimensional magnetism in the layered transition metal compound (C_nH_2n+1NH₃)₂CuCl₄ (n=10, 14) was investigated by means of electron paramagnetic resonance (EPR) and superconducting quantum interference device measurements. As a result, the high temperature magnetic phase transitions were reflected in the EPR parameters in a sensitive manner.     

The baddeleyite-type high pressure phase of Ca(OH)2

Abstract

A phase transition from Ca(OH)₂ I (portlandite) to Ca(OH)₂ II at high pressure and temperature has been confirmed, using in situ x-ray diffraction in a multianvil high pressure device (DIA). The structure was determined at 9.5 GPa and room temperature from data collected after heating the sample at 300°C at 7.2 GPa in a diamond anvil cell. Both the Le Bail fit and preliminary Rietveld refinement suggest that the new phase, which reverts to Ca(OH), I during pressure release, has a structure related to that of baddeleyite (ZrO₁); it is monoclinic (P2₁/c) with a= 4.887(2), b= 5.834(2), c = 5.587(2), β = 99.74(2)°. The coordination number of Ca increases from six to seven (5 + 2) across the transition. At 500°C, the phase boundary is bracketed at 5.7 ± 0.4 GPa by reversal experiments performed in the DIA.     

High-pressure effect on inverse spinel LiCuVO4:X-ray diffraction and Raman scattering

The effect of external quasi-hydrostatic pressure on the inverse spinel structure of LiCuVO 4 was studied in this paper. High-pressure synchrotron X-ray diffraction and Raman spectroscopy measurements were carried out at room temperature up to 35.7 and 40.3 GPa, respectively. At a pressure of about 20 GPa, both Raman spectra and X-ray diffraction results indicate that LiCuVO4 was transformed into a monoclinic phase, which remained stable up to at least 35.7 GPa. Upon release of pressure, the high-pressure phase returned to the initial phase. The pressure dependence of the volume of low pressure orthorhombic phase and high-pressure monoclinic phase were described by a second-order Birch-Murnaghan equation of state, which yielded bulk modulus values of B 0 = 197(5) and 232(8) GPa, respectively. The results support the empirical suggestion that the oxide spinels have similar bulk modulus around 200 GPa.     

Phase transition and thermodynamic properties of TiO2 from first-principles calculations

The pressure induced phase transitions of TiO2 from anatase to columbite structure and from rutile to columbite structure and the temperature induced phase transition from anatase to rutile structure and from columbite to rutile structure are investigated by ab initio plane-wave pseudopotential density functional theory method(DFT),together with quasi-harmonic Debye model.It is found that the zero-temperature transition pressures from anatase to columbite and from rutile to columbite are 4.55 GPa and 19.92 GPa,respectively.The zero-pressure transition temperatures from anatase to rutile and from columbite to rutile are 950 K and 1500 K,respectively.Our results are consistent with the available experimental data and other theoretical results.Moreover,the dependence of the normalized primitive cell volume V/V0 on pressure and the dependences of thermal expansion coefficient α on temperature and pressure are also obtained successfully.     

冲击加载下Zr51Ti5Ni10Cu25Al9金属玻璃的塑性行为

进行了10—27 GPa应力范围内Zr₅₁Ti₅Ni₁₀Cu₂₅Al₉金属玻璃的平面冲击实验以研究其高压-高应变率加载下的塑性行为.由样品自由面粒子速度剖面的分析获得了冲击加载过程的轴向应力,并通过轴向应力与静水压线的比较获得剪应力.实验结果表明,尽管存在明显的松弛效应,但Zr基金属玻璃的Hugoniot弹性极限随着冲击应力的增加而增加.然而,塑性波阵面上的剪应力则显示先硬化而后软化现象,而且软化的幅度随冲击应力的增加而增加.冲击加载下Zr基金属玻璃的上述剪应力变化特征与分子动力学模拟结果比较一致,但与压剪实验结果和一维应力冲击实验结果明显不同.     

Tb4O7掺杂的WO3陶瓷的高温热电现象

采用传统的固相烧结技术，制备Tb₄O₇掺杂的WO₃陶瓷. 测量了其高温热电行为，发现样品升温和降温时相变分别出现在350℃和270℃，有80℃的热滞.并且样品在500℃的恒定温度下有稳定的电能输出，这种现象用现有的温差电效应和热(释)电效应理论都不能解释.这是一种新的热电效应，利用它有可能找到热能—电能转换的新途径. 关键词： 3陶瓷')" href="#">WO₃陶瓷 热电转换 相变 热释电     

Structural phase transition behaviour of ZnaSb3 and its substitutional compounds （Zn0.98M0.02）4Sb3 （M = Al,Ga and In） at low temperatures

Structural phase transitions of Zn4Sb3 and its substitutional compounds (Zn0.98M0.02)4Sb3 (M = Al, Ga and In) are investigated by electrical transport measurement and differential scanning calorimetry below room temperature. The results indicate that both β→α and α→α′ phase transitions of Zn4Sb3 are reversible and exothermic processes, which may be explained as that both the transitions originate from the ordering of the disordered interstitial Zn and vacancies in regular sizes. The derived activation energies of β→α and α→α′ phase transition processes for Zn4Sb3 are E1 = 3.9 eV and E2 = 4.1 eV, respectively. Although no remarkable influence on activation energy E2 is observed after Al doping, Al substitution for Zn causes E1 to increase to 4.6 eV, implying its suppression of βα transition to a great extent. Moreover, it is found that both βα and αα′ transitions are completely prohibited by substitution of either In or Ga for Zn in Zn4Sb3. The underlying mechanisms for these phenomena are discussed.     

铁磁形状记忆合金Mn2NiGa中应力诱发马氏体相的结构和磁性

采用金刚石对顶砧高压装置（DAC）和同步辐射X射线光源法,对Heusler类型的磁性形状记忆合金Mn₂NiGa的结构进行了原位高压X射线衍射测量,并对卸载后的受压样品进行了磁测量.实验观察到材料在室温下分别在0.77 GPa和20 GPa压力下发生了两次不可逆结构相变：马氏体相变和两种不同马氏体间的等结构相变.同时加压使马氏体结构中产生了大量的缺陷,造成了严重的晶格畸变,致使马氏体结构的矫顽力提高了近10倍,达到204 kA/m.结果发现,加压处理造成样品马氏体相饱和磁化强度的大幅度 关键词： 铁磁形状记忆合金 2NiGa')" href="#">Mn₂NiGa 高压 同步辐射     

Luminescence of La3F3[Si3O9]:Ce

The luminescence properties of Ce³⁺ in La₃F₃[Si₃O₉] are reported. Excitation and emission bands corresponding to 4f¹→5d¹ transitions of Ce³⁺ were identified. The center of gravity of the 5d states lies at remarkable high energy (43.2×10³ cm⁻¹) for Ce³⁺ in a silicate compound. This high value is attributed to the combined oxygen/fluoride coordination of the Ce³⁺ ion. Emission from the lowest 4f5d level to the ²F_5/2 and ²F_7/2 levels was found at 32.4×10³ and 30.4×10³ cm⁻¹. These results are compared with literature data on silicates and fluorides. From the values found for Ce³⁺, predictions are made for the positions of the 4f5d bands of Pr³⁺ and Er³⁺ in La₃F₃[Si₃O₉]. For both ions, it is concluded that in this host lattice emission is expected from high lying 4fⁿ energy levels.     

Structure and dielectric studies of nano-composite Fe2O3: BaTiO3 prepared by sol-gel method

Nano-structure pure barium titanate (BaTiO₃) and that was doped with iron oxide (Fe₂O₃), have been prepared by sol-gel method, using barium acetate (Ba(Ac)₂) and titanium butoxide (Ti(C₄H₉O)₄), as precursors. The as-grown prepared samples by sol-gel technique were found to be amorphous, which crystallized to the tetragonal phase after synthesized at 750 °C in air for 1 h as detected from the XRD patterns. The XRD data were confirmed by transmission electron microscope (TEM). The dielectric properties namely; dielectric constant (ε′) and loss tangent (tan δ) in the frequency range between 42 Hz and 1 MHz, at range of temperature 25-250 °C were investigated. The temperature dependence of ε′ and tan δ for the undoped and doped materials, at 1 kHz, was also investigated. As a result, tan δ increased rapidly with decreasing temperature below 125 °C (Curie temperature) while above this temperature, tan δ shows temperature independent. As a result, below and above Curie temperature, ferroelectric phase and paraelectric phase of BaTiO₃ can be obtained, respectively.     

Pressure dependence of electronic structure and magnetic properties in Fe16N2

The electronic structures and magnetic properties of Fe₁₆N₂ system and their pressure dependence were investigated by using first-principles calculations based on the density functional theory. It has been found that the total magnetic moment in Fe₁₆N₂ system decreases monotonically as increasing pressure from 0 to 14.6 GPa. A phase transition from ferromagnetic (FM) to non-magnetic (NM) occurs with a volume collapse of around 0.008  at 14.6 GPa, The lattice constants a and c for magnetic results decrease monotonically as pressure increasing from 0 to 14.6 GPa, at 14.6 GPa, the lattice constant a decreases sharply, on the contrary, the lattice constant c increases abruptly. We think that the change of microscopic structure of Fe₁₆N₂ is responsible for the phase transition from FM to NM.     

Thermal expansion and magnetostriction in Pr(n+2)(n+1)Nin(n−1)+2Sin(n+1) compounds

Thermal expansion and magnetostriction of members of a homologous series of compounds based on the alloy series Pr_(n+2)(n+1)Ni_n(n−1)+2Si_n(n+1) have been measured. The crystal structures of these compounds are closely interrelated because they form trigonal prismatic columns in which the number of trigonal prisms that form the base of the trigonal columns is determined by the value of n in the chemical formula. Two compositions were investigated, Pr₅Ni₂Si₃ and Pr₁₅Ni₇Si₁₀, corresponding to n=3$n=3$ and n=4,$n=4,$ respectively. The results were analyzed and used to determine the location of magnetic phase transitions by calculating the magnetic contribution to thermal expansion using the Gruneisen–Debye theory. This allowed more precise determination of the magnetic transition temperatures than could be achieved using the total thermal expansion. The results show two phase transitions in each material, one corresponding to the Curie temperature and the other at a lower temperature exhibiting characteristics of a spin reorientation transition.     

SrB4O7:Sm2+: an optical sensor reflecting non-hydrostatic pressure at high-temperature and/or high pressure in a diamond anvil cell

A systematic investigation on the fluorescent spectra of SrB₄O₇:Sm²⁺ was performed in detail at high-temperature up to 623?K and/or high pressure up to 23.2?GPa with different pressure-transmitting media (PTMs), respectively. Combined with experiment data of previous research, the change of the ⁷D₀–⁵F₀ line (0–0 line) full width at half maximum (FWHM) of SrB₄O₇:Sm²⁺ under different pressure environments was specifically discussed. The results indicate that the FWHM of 0–0 line is sensitive to the non-hydrostatic pressure environment in 2-propanol, and methanol and ethanol mixture (ME) PTMs at ambient temperature. The first-order and the second-order derivation of the temperature dependence of 0–0 line FWHM at ambient pressure are 1.48(±0.21)?×?10^?4?nm/K and 9.63(±0.63)?×?10^?7?nm²/K² below 623?K. The 0–0 line FWHM is also sensitive to the non-hydrostatic pressure environment in ME at high-temperature and high pressure simultaneous, the non-hydrostatic transition pressures are 9.6?GPa at 323?K, 11.0?GPa at 373?K, 14.4?GPa at 423?K, respectively. SrB₄O₇:Sm²⁺ is recommended as an optical sensor to reflect the change of pressure environment in liquid media at high-temperature and/or high pressure.