纳米ZnO的表面化学修饰及其分析表征

采用水溶性羟丙基甲基纤维素HPMC对无机纳米ZnO粒子进行物理吸附处理 ,获得了核为无机纳米ZnO ,外壳为水溶性高分子HPMC的粒子。然后在其上进行了甲基丙烯酸甲酯的接枝聚合。采用红外光谱、差热分析的方法对复合粒子进行了表征 ,并采用透射电镜观察了粒子的形貌。红外光谱表明在纳米ZnO的表面吸附了HPMC并接枝了PMMA ,差热分析表明HPMC ,HPMC g PMMA和ZnO/HPMC g PMMA的热稳定性逐渐提高 ,透射电镜观察表明 ,在纳米ZnO的表面粘附了一层聚合物 ,成功地实现了纳米粒子的表面修饰。     

ZnO/MCM-41复合材料的制备及其光谱性质

以硅酸钠(NaSiO3·9H2O)为硅源,三甲基十六烷基溴化铵(CTAB)为模板剂在碱性条件下水热合成介孔分子筛MCM-41,然后以其为主体,采用锌盐浸渍-灼烧的方法.在介孔分子筛MCM-41上负载了氧化锌(ZnO)纳米微粒,并通过扫描电子显微镜,红外光谱(1R).紫外可见吸收光谱(UV-Vis),N2-吸附脱附和荧光光谱等手段对产品进行了系列表征.结果表明,分子筛平均直径约为1.7μm,对不同温度下灼烧后得到的ZnO/MCM-41组装体的光谱性质进行研究表明介孔分子筛MCM-41的尺寸所限,制备出的ZnO粒子粒径小于2 nm.量子尺寸效应使得ZnO/MCM-41组装体中的ZnO纳米粒子的紫外可见吸收光谱及荧光光谱均发生蓝移.通过红外光谱分析得知ZnO负载到MCM-41上并没有改变介孔分子筛原有的骨架结构.     

SiO2包覆共轭聚合物CN-PPV纳米探针的制备与荧光性质

采用纳米沉淀法制备了半导体聚合物CN-PPV纳米粒子,并用改进的Stber方法对纳米粒子进行包覆,获得了发光稳定的SiO2/CN-PPV纳米粒子。用动态光散射(DLS)及透射电镜(TEM)方法对粒子尺寸进行了表征,结果表明包覆前的CN-PPV纳米粒子平均粒径约为30 nm,包覆获得SiO2/CN-PPV纳米粒子的平均粒径约为60 nm。通过紫外-可见吸收光谱及荧光光谱对包覆前后纳米粒子的发光性质进行了比较,发现共轭聚合物CN-PPV包覆后的发射光谱与包覆前相比发生了小的蓝移,表明共轭聚合物的分子构型可能发生了微小变化。SiO2包覆可以提高聚合物发光分子的光稳定性,并且提供用于生物分子耦联的表面,这类材料有望在生物医学成像中获得应用。     

反相微乳液模板原位聚合制备纳米氯化银/聚甲基丙烯酸甲酯及其结构表征

用甲基丙烯酸甲酯 (MMA)作油相 ,反相胶束微乳液作为模板 ,制备了纳米氯化银 (AgCl)粒子 ,再进行原位聚合制备了纳米氯化银 /聚甲基丙烯酸甲酯 (AgCl/PMMA)复合材料 .透射电镜 (TEM )分析表明 ,纳米AgCl的尺寸为 2 0～ 80nm .扫描电镜 (SEM )测试表明纳米AgCl粒子均匀地存在于PMMA基材中 .红外分析证明 ,胶束中水和表面活性剂AOT的羰基在MMA聚合后微观环境发生变化 ,纳米粒子同聚合物之间有吸附行为 .动态力学 (DMTA)分析复合材料 ,发现纳米AgCl粒子与聚合物之间存在强烈相互作用 ,形成了中间相层 (interphaselayer) ,改变了聚合物的动态力学性能 .     

PVP/洛美沙星-铽纳米粒子微波合成及其荧光特性研究

以PVP为表面修饰剂,用微波合成法制备了粒径分布均匀性能稳定的洛美沙星-铽(LELX-Tb3 )纳米粒子,用扫描电镜、红外光谱和荧光光谱进行了表征.重点分析了PVP的引入对洛美沙星-铽纳米粒子的粒径分布、粒子形貌、红外光谱和荧光光谱的影响,发现PVP修饰后的洛美沙星-铽纳米粒子具有更均匀的尺寸分布,荧光发射峰强度增强;确证了PVP的用量是制备洛美沙星-铽纳米粒子的一个重要因素;探讨了PVP对LFLX-Tb3 荧光的增敏机理.     

ZnO/Ag纳米复合物的制备及光学性质

采用ZnO纳米晶表面还原Ag+的方法合成了ZnO/Ag纳米复合物,并研究了其光学性质.透射电镜和XRD谱表征了ZnO/Ag纳米复合物的晶体形貌和结构,吸收光谱和荧光光谱证明ZnO和Ag之间存在电子传递.在325 nm激光激发下观察到了ZnO/Ag纳米复合物的表面增强共振拉曼散射.     

Mg掺杂ZnO纳米晶的低温共沉淀法制备及光学性质

采用共沉淀(co-precipitation)法制备了Mg掺杂ZnO纳米晶,分别用X射线衍射(XRD)、傅立叶变换红外光谱(FTIR)、紫外可见吸收(UV-Vis)光谱、光致发光(PL)光谱、透射电镜(TEM)、电子顺磁共振(EPR)等分析手段对样品进行了表征。探究了Mg离子在ZnO纳米晶中的存在状态,ZnO纳米晶颗粒尺寸和发射光谱随Mg掺杂浓度的变化,并对其发光机理进行了分析。结果表明:Mg离子在ZnO晶格中以部分晶格位,部分间隙位的方式存在,没有形成MgO表面壳层结构;随Mg掺杂浓度的增大,ZnO纳米晶的颗粒尺寸变小,发射光的光强增大。发射光的最佳激发波长为342nm,中心波长为500nm,荧光量子产率为22.8%。实验分析表明:Mg离子的掺杂在ZnO纳米晶中引入了锌空位(VZn),间隙位的镁离子(IMg),提供了新的复合中心,从而增强了ZnO纳米晶的光致发光。     

紫外发光增强的石墨烯-氧化锌纳米复合物

采用溶剂热法在相同条件下分别制备了纯ZnO和石墨烯-氧化锌纳米复合物,通过SEM、TEM、拉曼和红外光谱等手段,对纳米复合物样品进行了形貌和结构表征。实验结果显示ZnO纳米颗粒成功地分散在少层石墨烯上。通过对比纯ZnO与复合物的形貌和光致发光谱,发现在没有石墨烯时,ZnO能够择优取向生长成六方棱柱,紫外发光峰弱且宽;在有石墨烯时,ZnO聚集成表面不规则的球形颗粒,紫外发光峰强且窄。上述结果表明ZnO形貌的变化和石墨烯的等离子体效应共同影响了ZnO的紫外发光,但石墨烯的表面等离子体效应起主导作用。     

碲化镉量子点/聚吡咯纳米复合物的发光性质研究

通过原位种子聚合构筑了碲化镉量子点(CdTe QDs)/聚吡咯(PPy)纳米复合物。利用透射电镜、红外光谱及荧光发射光谱对其形貌、结构、光致发光性质进行了测试分析。研究结果表明, 复合物中CdTe量子点结晶良好。复合物中两组分间能级耦合相互作用使量子点表面陷阱态钝化, 从而导致对应CdTe量子点带间跃迁的410 nm发光峰的出现, 显示了复合物作为光电器件材料的潜在应用价值。     

聚(2-甲氧基-5-辛氧基)对苯乙炔/TiO2纳米复合材料的光物理性能研究

通过原位强碱诱导下的脱氯化氢缩合聚合法制备了一系列不同纳米TiO2含量的聚(2-甲氧基-5-辛氧基)对苯乙炔/纳米二氧化钛(PMOCOPV/TiO2)光电复合材料。红外光谱和拉曼光谱证实了在纳米TiO2表面的包覆层为PMOCOPV。紫外-可见吸收光谱表明随着TiO2含量的增加PMOCOPV/TiO2纳米复合材料的吸收强度提高。高分辨透射电镜观察发现PMOCOPV/TiO2是具有核-壳结构的纳米复合粒子,直径约30 nm,其中PMOCOPV包覆层的厚度约为8~10 nm。荧光光谱研究表明,PMOCOPV/TiO2纳米复合材料的最大发射波长随着TiO2含量的增加发生红移,荧光寿命约为1 ns,且随着TiO2含量的增加荧光强度和荧光寿命得到显著提高,并通过PMOCOPV/TiO2纳米复合材料中的激子离化和电荷传输过程以及复合材料中的电势能级探讨了PMOCOPV/TiO2的荧光量子效率和荧光强度增加的机理。     

Dielectric behaviour of emeraldine base polymer–ZnO nanocomposite film in the low to medium frequency

Emeraldine base (EB) polymer–ZnO nanoparticles composite films has been synthesized by solution casting technique on ITO-coated glass substrate and characterized by XRD, FTIR and TEM for their structure and morphology. Dielectric behaviour of these composite films has been investigated in the very low frequency region to medium frequency region (1 kHz–1 MHz). The dielectric constant of the composite with 30% nanoparticles is almost one-tenth of the pure EB. The dielectric value becomes constant in the frequency region greater than 400 kHz. The change in dielectric behaviour of the composite is explained on the basis of multilayered interface formed between the ZnO nanoparticles and emeraldine chains. Nanoparticles have high energy surface which is responsible for the decrease of free volume for the orientation of polymer chains consequently decrease in dielectric constant of the composite. TEM images shows about 10 nm ZnO particles embedded in the emeraldine matrix. From the XRD data it has been observed that the lattice parameters of ZnO have been modified due to the alignment of polymer chains along the basal planes of the nanoparticles. The shift of N=Q=N and N–B–N vibration bands to higher wave number in IR indicates that interaction between emeraldine chain and nanoparticles which provides stability to emeraldine matrix.     

Preparation and characterization of polyindole–ZnO composite polymer electrolyte with LiClO<Subscript>4</Subscript>

This paper describes the preparation and conductivity studies of polyindole–ZnO composite polymer electrolyte (CPE) with LiClO₄. Polyindole–ZnO-based polymer nanocomposites were prepared by chemical method and characterized by XRD, infrared (IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The IR spectrum confirms the intermolecular interaction between polyindole and ZnO. The significant spectral changes of polyindole and ZnO nancomposites reveal the strong interaction between polyindole and ZnO nanoparticles. The structural morphologies of the ZnO, polyindole, and polyindole–ZnO are obtained from SEM. The TEM image of polyindole nanocomposite shows that ZnO is embedded in polyindole matrix. An enhanced conductivity of 4.405 × 10⁻⁷ S cm⁻¹ at 50 °C for the CPE was determined from impedance studies.     

Preparation of Gold/triblock Copolymer Composite Nanoparticles

A kind of novel gold (Au)/hydroxylated poly (styrene-b-butadiene-b-styrene) triblock copolymer (HO-SBS) composite nanoparticles was synthesized by reduction of tetrachloroaurate ions in HO-SBS micelle. The Au–HO-SBS composite nanoparticles are composed by gold core about 35 nm in diameter and polymer shell about 7 nm in thickness. Formation of the Au/HO-SBS nanoparticles is indentified by infrared (IR) and UV-visible absorption spectroscopies. Transmission electron microscopy (TEM) result shows that the composite nanoparticles tend to aggregate into an ordered hexagonal array on carbon-coated grid.     

Preparation, characterization and surface morphology of novel optically active poly(ester-amide)/functionalized ZnO bionanocomposites via ultrasonication assisted process

Novel bionanocompoites (BNCs) were prepared using zinc oxide (ZnO) nanoparticles which functionalized by γ-methacryloxypropyltrimethoxysilane (KH570) as a coupling agent. Poly(ester-amide) (PEA) based on tyrosine natural amino acid was synthesized and used as a polymer matrix. PEA/ZnO BNCs were characterized by fourier transform infrared spectra (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM) and transmission electron microscopy (TEM). All the results confirmed that the surface of ZnO particle has sufficient compatibility with PEA through the link of the coupling agent between ZnO and polymer and also proved that the presence of ZnO nanoparticles appeared to be dispersed in nanosize in polymer composite matrix. In addition, thermogravimetric analysis (TGA) data indicated an enhancement of thermal stability of new BNC materials compared with the pure polymer.     

Temperature and concentration dependences of the photoluminescence of MEH-PPV polymer composite films with ZnO nanoparticles

The absorption and photoluminescence (PL) spectra of MEH-PPV: ZnO composite films have been investigated at different concentrations of ZnO nanoparticles and at different temperatures (in the case of PL). It has been shown that, at 297 K, with increasing concentration of ZnO nanoparticles in the composite, the intensity of the PL lines of MEH-PPV decreases, whereas the intensity of the PL lines of ZnO increases. At a relatively low concentration of ZnO nanoparticles, a decrease in the temperature leads to an increase in the intensity of PL lines associated with MEH-PPV and ZnO, whereas at higher concentrations of ZnO nanoparticles, the intensity of these lines decreases. This is accompanied by a slight shift in the maximum of the PL toward the infrared (IR) region and a narrowing of the PL line of MEH-PPV with a decrease in the temperature and with an increase in the ZnO concentration. The mechanism of energy transfer in composite systems consisting of a polymer and inorganic nanoparticles that can be responsible for the observed effects has been discussed.     

Synthesis and application in solar cell of poly(3-dodecylthiophene)/titanium dioxide nanocomposite

A conducting polymer composite poly(3-dodecylthiophene)/titanium dioxide (P3DDT/TiO₂) nanocomposite was first synthesized through the ultrasonic method. The results from X-ray diffraction (XRD) and infrared spectroscopy (IR) show that there is chemical interaction in the composite. Transmission electron microscope (TEM) and scanning electron microscope (SEM) depict the morphology of the samples, defining that TiO₂ was successfully coated by poly(3-dodecylthiophene) molecules. The energy gap of the poly(3-dodecylthiophene)/titanium dioxide composite is lower to 0.76 eV compare with poly(3-dodecylthiophene) and titanium dioxide separately, and it also shows that the optical performance of the new material is far superior than P3DDT or TiO₂ separately by ultraviolet-visible spectra (UV) and fluorescence spectroscopy (PL). Solar cell was sensitized by P3DDT/TiO₂. A solar-to-electric energy conversion efficiency of 0.188% was attained with the system.     

Sonochemical synthesis of a novel nano-rod two-dimensional zinc(II) coordination polymer; preparation of zinc(II) oxide nanoparticles by direct thermolyses

A novel mixed-ligand zinc(II) coordination polymer, {[Zn(μ-4,4'-bipy)(μ-3-bpdh)(H(2)O)(2)](ClO(4))(2)·(4,4'-bipy)(0.5)}(n) (1); 3-bpdh=2,5-bis(3-pyridyl)-3,4-diaza-2,4-hexadiene and 4,4'-bipy=4,4'-bipyridine, has been synthesized and characterized by IR, (1)HNMR and (13)CNMR spectroscopy. The single crystal X-ray data of compound 1 shows that this coordination polymer grows in two dimensions by two different bridging ligands, 4,4'-bipy and 3-bpdh. Also, nano-scale of compound 1 has been synthesized by sonochemical method and characterized by IR, X-ray diffraction (XRD) and scanning electron microscopy (SEM). Thermal stability of compound 1 in single crystalline and nano-scale form was carried out by thermal gravimetric (TG) and differential thermal analysis (DTA). The ZnO nanoparticles were obtained by calcination of compound 1 at 500°C under air atmosphere and by thermolyses in oleic acid at 200°C. The zinc(II) oxide nanoparticles were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM).     

复合磁性纳米NiFe2O4的制备及光谱特性

用微乳液化学剪裁方法制备了明胶包裹的复合纳米NiFe2 O4 。将明胶和亚铁盐以及镍盐制成凝胶 ,使该凝胶状反应物在微乳液的胶束中剪裁成微粒 ,再被还原 化合 成核长大。生成的微粒处于明胶蛋白分子的包裹之中。用XRD ,TEM ,EDS ,IR等测试表明 :微粒为明胶包裹球形纳米微粒。微球的平均粒径为 10～10 0nm ,单个微粒的粒径 3 3～ 4 6nm。每个复合微球中约有 3～ 2 2个NiFe2 O4 粒子。NiFe2 O4 复合微粉的比饱和磁化强度σs=36 31× 10 3 4π(A·m- 1 ·g- 1 ) ,矫顽力Hc=6 75 0A·m- 1 ,剩磁Br=4 39× 10 3 4π(A·m- 1 ·g- 1 )。     

Preparation and optical properties of ZnO@PPEGMA nanoparticles

The poly(poly(ethylene glycol) methyl ether monomethacrylate) (PPEGMA) grafted zinc oxide (ZnO) nanoparticles were successfully prepared via the surface-initiated atom transfer radical polymerizations (ATRP) from the surfaces functionalized ZnO nanoparticles. The 2-bromoisobutyrate (BIB) was immobilized onto the surface of the ZnO nanoparticles through the reaction between 2-bromoisobutyryl bromide (BIBB) and the hydroxyl groups on nanoparticles, serving as the initiator to induce the ATRP of poly(ethylene glycol) monomethacrylate (PEGMA). Well-defined polymer chains were grown from the surfaces to yield hybrid nanoparticles comprised of ZnO cores and PPEGMA polymer shells having multifunctional end groups. The structure and morphology of the nanoparticles were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The optical properties of the nanoparticles were investigated by UV-vis absorption spectroscopy and photoluminescence spectroscopy (PL). The results showed that the dispersion and near-band edge (NBE) emission of ZnO nanoparticles could be improved by the grafted PPEGMA polymer segments.     

Fabrication of surface‐enhanced Raman scattering‐active ZnO/Ag composite microspheres

We show in this paper how zinc oxide (ZnO)/silver (Ag) composite microspheres can be prepared by the reduction of Ag(NH₃)₂⁺ with the reducing agent formaldehyde in aqueous solution on the surface of ZnO microspheres. During the preparation, Sn²⁺ was absorbed on the surface of ZnO microspheres for sensitization and activation, and then Ag(NH₃)₂⁺ was reduced to Ag nanoparticles by the reducing agent to obtain ZnO/Ag composite microspheres. SEM and TEM images revealed silver nanoparticles with a diameter ranging from tens to 100 nm. X‐Ray photoelectron spectra (XPS), X‐ray diffraction (XRD) patterns and UV‐vis spectra were used to characterize the structure of the ZnO/Ag composite microspheres. The origin of the surface‐enhanced Raman scattering properties was traced to the surface of the ZnO/Ag composite microspheres. The enhancement factor was estimated in detail, and the enhancement mechanism for the SERS effect was also investigated. Copyright © 2007 John Wiley & Sons, Ltd.