二维光子晶体禁带特性研究

采用平面波展开法对二维光子晶体分别在E和H极化下的带隙进行了计算. 考虑了填充比、晶格结构、介电常数对最大绝对帯隙的影响. 结果表明,不论是正方晶格还是三角晶格,TM模在介质柱型光子晶体中更容易形成带隙;TE模在空气孔型光子晶体中更容易形成带隙. 填充比一定,最大绝对帯隙宽度并非随着介电常数增大总是增大,而是存在一个峰值. 相对介电常数一定,最大绝对帯隙宽度随填充比的变化也存在一个峰值. 不论空气孔型还是介质柱型结构,三角晶格比正方晶格更容易形成帯隙. 关键词： 平面波展开法 TE模 TM模 最大绝对帯隙     

旋转对二维正方晶格介质柱内空结构光子晶体禁带的影响

采用平面波展开的方法计算了三种旋转操作下二维正方晶格各向异性材料(Te)介质柱内空结构光子晶体TE,TM模式能带.讨论了三种旋转操作对TE,TM模式带隙及完全光子禁带的影响.发现TM模式高频带隙与结构的旋转对称性有着密切的关系.而TE模式的带隙不仅受到晶体旋转对称性的影响同时也受到介质在x-y平面分布情况的影响. 关键词： 二维光子晶体 内空结构 旋转操作 光子带隙     

二维正方晶格各向异性光子晶体缺陷模

为了得到对TM和TE模具有相同缺陷模的共振微腔,通过在完整各向异性碲介质柱二维正方光子晶体中,引入各向同性的介质圆柱作为点缺陷,利用超胞平面波展开法计算该光子晶体的缺陷模,系统计算了在同时改变点缺陷介质柱介电常数和半径两种情况下的两种偏振缺陷模的变化规律。结果表明,在完全禁带中,缺陷介质柱介电常数从5.44变化到38.44、半径与晶格常数的比从0.05变化到0.50的整个区域,均会出现对TM和TE模具有相同缺陷模,且随着介电常数的减小,缺陷模随着缺陷半径的变化趋于缓慢,归一化共振频率在0.241 8~0.243 2之间可调,在引入ε_e＜ε_o的各向异性介质柱缺陷时,亦可得到对TM和TE模具有相同缺陷模,且共振频率的可调范围增大,该研究为光子晶体器件的设计提供了理论依据。     

二维介质型光子晶体的直线法分析

运用直线法对二维介质型光子晶体的能带结构进行分析,给出直线法中关于二维介质型光子晶体的本征方程的建立过程.同时,对不同参数的光子晶体进行计算,计算结果通过时域有限差分算法(FDTD)及已发表的数据得到了验证,并考虑不同结构的光子晶体的TE波与TM波的带隙形成情况,可为二维介质型光子晶体的设计提供参考.     

斜入射角对二维正方形光子晶体带隙的影响

利用平面波法导出了光子晶体本征方程的矩阵形式,以此为基础计算了二维空气孔型正方形光子晶体在正入射时及斜入射时的带结构,并将带结构中混杂在一起的TE波和TM波的模式分离开来以分析斜入射角对带结构的影响.计算结果显示用电场E表示和用磁场H表示计算出来的结果完全一样,与电磁场是相互统一的结论完全吻合.研究还发现,TE波和TM波的第一带隙是完全分开的.随着波矢k的倾斜角度的增大,TE波的第一带隙逐渐减小并在波矢在（－1,0,1）平面内时完全消失.而TM波的带结构则随着波矢k的倾斜角的增大而变得平坦,带隙也是先随之增大,后又逐渐变小直至消失.     

旋转对二维正方晶格介质柱内空结构光子晶体禁带的影响

采用平面波展开的方法计算了三种旋转操作下二维正方晶格各向异性材料(Te)介质柱内空结构光子晶体TE,TM模式能带.讨论了三种旋转操作对TE,TM模式带隙及完全光子禁带的影响.发现TM模式高频带隙与结构的旋转对称性有着密切的关系.而TE模式的带隙不仅受到晶体旋转对称性的影响同时也受到介质在x-y平面分布情况的影响.     

光控二维光子晶体光开关

提出了一种调节液晶光子晶体光子带隙的方法。二维三角介质柱形光子晶体位于2块熔凝石英片之间,在介质柱之间填充各向同性排列的液晶,受偏振紫外光照射后,光诱导液晶分子定向排列,通过光诱导液晶分子取向改变液晶的折射率。数值模拟结果表明：通过外界光场控制所填充的向列相液晶分子的方向可以对这种二维三角形介质柱光子晶体的禁带结构进行调节。该可调光子晶体可控制波导中TM模和TE模的选择性传输,因而可应用于制作全光光开关。     

电磁波在周期介质中的传播及二维光子晶体的光子带结构

光子晶体是光学与凝聚态物理交叉的新领域,也是近年来应用物理学的一个重要研究领域,它是一种由介电常数高的(低的)介质在另一种介电常数低的(高的)背景介质中周期排列所组成的人造多维周期结构材料,能够产生光子带隙。频率落在带隙内的光在晶体里沿任何方向都不能传播,因而具有能够抑制原子、分子的自发辐射等诱人的光电子学特性,在基础研究和实际应用上都有着巨大的潜力。本文在这一领域里进行了富有成效的研究,获得了很好的结果。主要有:(1)利用平面波展开方法来计算二维光子晶体的带隙结构。首先,我们设计正方晶胞的二维光子晶体模型。设x₃方向为介质柱的轴方向,二维周期结构在x₁-x₂平面上。晶胞的晶格常数为a,半径为r,介质柱和空气柱的介电常数分别为ε_a=17和ε_b=1,a>2r。设计的核心思想是通过降低光子晶体结构的对称性,消除光子能带在晶体的布里渊区高对称点上的本征简并。(2)对于二维光子晶体的电磁波理论及周期介质中的Bloch波解做了详细的推导,给出了光子晶体中禁带存在的理论依据。同时以正方格子晶格的二维光子晶体为例,验证了电介质在空气圆孔中的排列存在E偏振和H偏振的光子带隙重叠区,称为绝对光子带隙。对于二维的光子晶体,两种本征偏振模式的光子能带结构可以独立地调节,以实现两者的光子带隙的最优重叠, 从而大大提高了二维光子晶体的完全带隙宽度。     

Ge基二维正方晶格光子晶体带隙优化设计

采用平面波展开法模拟二维光子晶体在E极化和H极化下的能带结构,研究Ge基二维正方晶格光子晶体的填充比以及晶格排列结构对最大禁带宽度的影响。结果表明：在空气背景材料中填充Ge柱的介质柱结构中,可产生TE、TM带隙,且各方向完全带隙出现在r/a=0.19~0.47范围内,最大完全帯隙禁带宽度可以达到0.064（归一化频率）;在选取Ge为背景材料的空气孔型结构中,同样可产生TE、TM带隙,且各方向完全带隙出现在r/a=0.46~0.49范围内,最大完全帯隙禁带宽度可以达到0.051（归一化频率）。同时,不论在介质柱型还是空气孔型结构中,带隙宽度都随着r/a的增大呈先增大后减小的趋势。     

二维色散和各向异性磁化等离子体光子晶体色散特性研究

采用平面波展开法和时域有限差分法研究了二维色散和各向异性磁化等离子体光子晶体的色散特性.当波矢在周期平面时,由于外加磁场的作用使TE模的色散曲线出现两个不同区域的平带,改变磁场的大小不但可以控制平带的位置,而且可以控制光子带隙的位置和大小.增大背景材料的介电常数,可以形成全方向光子带隙,随着背景材料介电常数的增加,带隙的中心位置降低但带隙宽度增加.当波矢偏离周期平面时,色散曲线不再分为TE和TM模,随着非周期平面波矢的增加,带隙位置上移,带隙宽度先增加随后基本保持不变.     

Two-dimensional function photonic crystals

In this paper, we have studied two-dimensional function photonic crystals, in which the dielectric constants of medium columns are the functions of space coordinates , that can become true easily by electro-optical effect and optical kerr effect. We calculated the band gap structures of TE and TM waves, and found the TE (TM) wave band gaps of function photonic crystals are wider (narrower) than the conventional photonic crystals. For the two-dimensional function photonic crystals, when the dielectric constant functions change, the band gaps numbers, width and position should be changed, and the band gap structures of two-dimensional function photonic crystals can be adjusted flexibly, the needed band gap structures can be designed by the two-dimensional function photonic crystals, and it can be of help to design optical devices.     

Band gaps structure and semi-Dirac point of two-dimensional function photonic crystals

Two-dimensional function photonic crystals, in which the dielectric constants of medium columns are the functions of space coordinates , are proposed and studied numerically. The band gaps structures of the photonic crystals for TE and TM waves are different from the two-dimensional conventional photonic crystals. Some absolute band gaps and semiDirac points are found. When the medium column radius and the function form of the dielectric constant are modulated, the numbers, width, and position of band gaps are changed, and the semi-Dirac point can either occur or disappear. Therefore,the special band gaps structures and semi-Dirac points can be achieved through the modulation on the two-dimensional function photonic crystals. The results will provide a new design method of optical devices based on the two-dimensional function photonic crystals.     

Photonic band gaps structure properties of two-dimensional function photonic crystals

The tunable two-dimensional photonic crystals band gap, absolute photonic band gap and semi-Dirac point are beneficial to designing the novel optical devices. In this paper, tunable photonic band gaps structure was realized by a new type two-dimensional function photonic crystals, which dielectric constants of medium columns are functions of space coordinates. However for the two-dimensional conventional photonic crystals the dielectric constant does not change with space coordinates. As the parameter adjustment, we found that the photonic band gaps structures are dielectric constant function coefficient, medium columns radius, dielectric constant function form period number and pump light intensity dependent, namely, the photonic band gaps position and width can be tuned. we also obtained absolute photonic band gaps and semi-Dirac point in the photonic band gaps structures of two-dimensional function photonic crystals. These results provide an important theoretical foundation for design novel optical devices.     

TM模式下二维非磁化等离子体光子晶体的禁带调制特性分析

采用时域有限差分法(FDTD)中的分段线性电流密度卷积(PLCDRC)算法研究了TM波入射时二维非磁化等离子体光子晶体的禁带特性.从频域角度分析得到微分高斯脉冲的透射系数,并讨论该光子晶体的介质圆柱的介电常数、晶格常数、介质圆柱半径,周期常数和等离子体参数对其禁带特性的影响.结果表明,增加周期常数和等离子体碰撞频率不会改变禁带宽度,增加介质圆柱的相对介电常数和等离子体频率可以展宽禁带的宽度. 当填充率一定时,减小介质圆柱的半径和晶格常数可以实现禁带的拓展. 关键词： 等离子体 光子晶体 禁带 PLCDRC算法     

Photonic band gap engineering in 2D photonic crystals

The polarization-dependent photonic band gaps (TM and TE polarizations) in two-dimensional photonic crystals with square lattices composed of air holes in dielectric and vice versa i.e., dielectric rods in air, using the plane-wave expansion method are investigated. We then study, how the photonic band gap size is affected by the changing ellipticity of the constituent air holes/dielectric rods. It is observed that the size of the photonic band gap changes with changing ellipticity of the constituent air holes/dielectric rods. Further, it is reported, how the photonic band gap size is affected by the change in the orientation of the constituent elliptical air holes/dielectric rods in 2D photonic crystals.     

Polaritonic and photonic gap interactions in a two-dimensional photonic crystal

If an ionic material is used in a photonic crystal, the lattice resonance creates a polaritonic gap in the infrared range. The interaction between a polaritonic gap and the structure gap in a 2D square photonic crystal is studied by transfer matrix photonic band structure calculations. The polaritonic gap appears for a surprisingly low volume density of the ionic material. The TM gaps are larger than the TE gaps, as in the dielectric case. By varying the lattice constant, the structure gaps can be shifted across the polaritonic gap, and the effects of merging the two gaps can be studied.     

三角晶格二维光子晶体的横磁模特性

基于平面波展开法,以介电常数分别为1F/m和12F/m的物质构成三角晶格二维光子晶体,改变空气孔半径r与晶格常数a之间的大小,数值模拟得到了三角晶格二维光子晶体横磁模带隙,当r=.4α时形成三处三角晶格二维光子晶体横磁模的带隙,其中最大三角晶格二维光子晶体横磁模带隙出现在0.6766—0.8000Hz,差值为0.1234Hz。研究结论为光子晶体器件的制作提供参考。     

Photonic Band Gap in Two-Dimensional Anisotropic Photonic Crystal with Rectangular Bars

Photonic band gap (PBG) in two-dimensional (2D) anisotropic photonic crystal (PC) constructed of rectangular bars has been numerically studied by using Transfer Matrix Method (TMM). The results show that the PBG is bounded by the lower band edge of TE wave and the upper band edge of TM wave. Its width simply increases with increasing of shape parameter . It reaches a maximum value as the structure degenerates into its 1D counterpart, due to the complete overlapping of gaps in TE and TM waves. The anisotropy in PC structure results in the transmission anisotropic property. One can design the PBG structures in different incident directions to match their application demand.