A位等价与非等价取代对(K0.5Na0.5)NbO3陶瓷极化的影响

研究了在铌酸钾钠基陶瓷中,A位等价与非等价取代对陶瓷极化温度和极化电场的影响,结果表明:A位等价取代的陶瓷对极化温度和极化电场没有强烈依赖性,可以使极化足够充分,能有效提高铌酸钾钠基陶瓷的压电性能;相反,A位非等价取代的陶瓷对极化温度和极化电场敏感,容易击穿,极化不充分,限制了铌酸钾钠基陶瓷的压电性能. 关键词： 铌酸钾钠 极化 压电     

Properties of non-stoichiometric 0.935(K0.5+xNa0.5+x)NbO3-0.065LiSbO3 lead-free piezoelectric ceramics

0.935(K_0.5+xNa_0.5+x)NbO₃-0.065LiSbO₃ lead-free piezoelectric ceramics were prepared by normal sintering, and their piezoelectric and dielectric properties were investigated by varying the compensating amount x of alkaline elements (Na and K) addition. It was found that the crystal structure changed from tetragonal to orthorhombic with increasing x from −0.010 to 0.010. An MPB was tailored by optimizing the alkaline elements contents. Enhanced electrical and electromechanical responses of d₃₃=253 pC/N, k_p=0.47, k_t=0.45 and tanδ=0.027 were obtained in the ceramics with x=0.005. These excellent piezoelectric and electromechanical properties indicate that this system may be an attractive lead-free material for a wide range of electro-mechanical transducer applications.     

Dielectric and piezoelectric properties of non-stoichiometric (K0.5Na0.5)(Nb0.9+xTa0.1)O3 ceramics

In the study, in order to develop the lead-free piezoelectric ceramics for actuator, transformer and other electronic-devices application, (K_0.5Na_0.5)(Nb_0.9+xTa_0.1)O₃ + 0.5 mol% CuO + 0.2 mol% MnO₂ ceramics were prepared by conventional mixed oxide method. The effects of B-site non-stoichiometry in [(K_0.5Na_0.5)] [(Nb_0.9+xTa_0.1)O₃] ceramics on microstructure and piezoelectric properties were investigated. The density, electromechanical coupling factor (k_p), mechanical quality factor (Q_m), piezoelectric constant (d₃₃), T_C and T_O-T of NKNT ceramics with x = 0.0065 showed the optimum values of 4.58 g/cm³, 0.427, 1554, 109 pC/N, 373 °C and 226 °C, respectively, suitable for piezoelectric motor, and transformer applications.     

K0.5Na0.5NbO3-LiSbO3-BiFeO3/CuFe2O4复合陶瓷的制备与磁电性能研究

采用传统的固相法制备了(1-x)(K_0.5Na_0.5NbO₃-LiSbO₃-BiFeO₃)-xCuFe₂O₄ (x=0.1, 0.2, 0.3, 0.4) 磁电复合陶瓷, 并借助X射线衍射仪、扫描电镜和磁电耦合系数测试仪等对复合陶瓷的微结构和性能进行了分析. 结果表明, 复合陶瓷的K_0.5Na_0.5NbO₃-LiSbO₃-BiFeO₃和CuFe₂O₄物相之间发生了一定的离子相互扩散作用, 且两相的颗粒大小匹配性较好. 随着CuFe₂O₄含量增加, 复合陶瓷的压电系数从130 pC/N减小到30 pC/N, 饱和磁致伸缩系数从4.5×10^-6增加到12.4×10^-6左右, 磁电耦合系数表现出先增加后减小, 在x=0.3时获得最大的磁电耦合系数9.4 mV·cm^-1·Oe^-1. 关键词： 0.5Na_0.5NbO₃-LiSbO₃-BiFeO₃')" href="#">K_0.5Na_0.5NbO₃-LiSbO₃-BiFeO₃ 2O₄')" href="#">CuFe₂O₄ 磁电耦合     

Structure, ferroelectric and piezoelectric properties of (Bi1−x−yNa0.925−x−yLi0.075)0.5BaxSryTiO3 lead-free piezoelectric ceramics

Lead-free multi-component ceramics (Bi_1−x−yNa_{0.925−x−y}Li_0.075)_0.5Ba_xSr_yTiO₃ have been prepared by an ordinary sintering technique and their structure and electrical properties have been studied. All the ceramics can be well-sintered at 1100 °C. X-ray diffraction patterns shows that Li⁺, Ba²⁺ and Sr²⁺ diffuse into the Bi_0.5Na_0.5TiO₃ lattices to form a new solid solution with a pure perovskite structure, and a morphotropic phase boundary (MPB) is formed at 0.04 < x < 0.08. As compared to pure Bi_0.5Na_0.5TiO₃ ceramic, the coercive field E_C of the ceramics decreases greatly and the remanent polarization P_r of the ceramics increases significantly after the formation of the multi-component solid solution. Due to the MPB, lower E_C and higher P_r, the piezoelectricity of the ceramics is greatly improved. For the ceramics with the compositions near the MPB (x = 0.04–0.08 and y = 0.02–0.04), piezoelectric coefficient d₃₃ = 133–193 pC/N and planar electromechanical coupling factor k_P = 16.2–32.1%. The depolarization temperature T_d reaches a minimum value near the MPB. The temperature dependences of the ferroelectric and dielectric properties suggest that the ceramics may contain both the polar and non-polar regions at temperatures near/above T_d.     

Relationship between phase structure and electrical properties of (K0.5Na0.5)NbO3-LiTaO3 lead-free ceramics

Lead-free piezoelectric ceramics of (1−x)K_0.5Na_0.5NbO₃-xLiTaO₃ (KNN-LT) system have been investigated in this work. X-ray diffraction, Raman spectra measurements, DSC (Differential Scanning Calorimetric), and dielectric constant versus temperature provide direct evidence that the phase transition temperature between tetragonal and orthorhombic shift to lower temperature with the increasing of LT content. The KNN-0.05LT ceramics exhibit the highest high-field d₃₃ up to 220 pm/V. At the same time, we also investigated the relationship between phase structure and electric properties, showing that the orthorhombic phase presents better piezoelectric temperature stabilities than the tetragonal phase. The result may provide a new way for KNN-based lead-free ceramics.     

Characterization of lead free (K0.5Na0.5)NbO3-LiSbO3 piezoceramic

(K_0.5Na_0.5)NbO₃ (KNN) based lead free ceramics have been fabricated by a solid state reaction. In this work, LiSbO₃ (LS) modified KNN based ceramics were sintered at atmospheric pressure and high density (>96% theoretical) was obtained. The detailed elastic, dielectric, piezoelectric and electromechanical properties were characterized by using the resonance technique combined with the ultrasonic method. The full set of material constants for the obtained polycrystalline ceramics were determined and compared to the pure hot pressed KNN counterpart. KNN-LS polycrystalline ceramic was found to have higher elastic compliance, dielectric permittivity and piezoelectric strain coefficients, but lower mechanical quality factor, when compared to pure KNN, exhibiting a “softening” behavior. However, a high coercive field (∼17 kV/cm) was found for the LS modified KNN material. The properties as a function of temperature were determined in the range of −50-250 ^°C, showing a polymorphic phase transition near room temperature, giving rise to improved piezoelectric behavior.     

Structural and electrical properties of (Na0.85K0.15)0.5Bi0.5TiO3 thin films deposited on LaNiO3 and Pt bottom electrodes

(Na_0.85K_0.15)_0.5Bi_0.5TiO₃ thin films were deposited on LaNiO₃(LNO)/SiO₂/Si(1 0 0) and Pt/Ti/SiO₂/Si(1 0 0) substrates by metal-organic decomposition, and the effects of bottom electrodes LNO and Pt on the ferroelectric, dielectric and piezoelectric properties were investigated by ferroelectric tester, impedance analyzer and scanning probe microscopy, respectively. For the thin films deposited on LNO and Pt electrodes, the remnant polarization 2P_r are about 22.6 and 8.8 μC/cm² under 375 kV/cm, the dielectric constants 238 and 579 at 10 kHz, the dielectric losses 0.06 and 0.30 at 10 kHz, the statistic d_33eff values 95 and 81 pm/V. The improved piezoelectric properties could make (Na_1−xK_x)_0.5Bi_0.5TiO₃ thin film as a promising candidate for piezoelectric thin film devices.     

Na0.25K0.25Bi0.5TiO3无铅压电陶瓷的介电特性研究

用固相反应法制备了Na_0.25K_0.25Bi_0.5TiO₃ (NKBT50)陶瓷，研究了该陶瓷在室温至400℃温度范围内的介电性能.发现该陶瓷的介电温谱与烧结气氛、极化状态有关.在空气中烧结的未极化样品在70℃附近存在介电和损耗峰，而极化后及在氧气氛中烧结的样品并不存在该介电、损耗峰.分析认为70℃的介电和损耗峰与氧空位形成的缺陷偶极子的极化弛豫有关.热激电流显示，陶瓷的去极化温度为225℃，与此相对应的介电、损耗峰也 关键词： 介电性能 氧空位 极化弛豫 钛酸铋钠钾     

Microstructure and piezoelectric properties of Bi0.5(Na0.82K0.18)0.5TiO3−NaSbO3 ceramics

Lead-free piezoelectric ceramics (1−x)Bi_0.5(Na_0.82K_0.18)_0.5TiO₃−xNaSbO₃ have been prepared by a conventional ceramics technique, and their microstructure and electrical properties have been investigated. The addition of NaSbO₃ has no remarkable effect on the crystal structure within the studied doping content; however, an obvious change in microstructure took place. With increase in NaSbO₃ content, the temperature from a ferroelectric to antiferroelectric phase transition increases, and the temperature for a transition from antiferroelectric phases to paraelectric phases changes insignificantly. Simultaneously, the temperature range between the rhombohedral phase transition point and the Curie temperature point becomes smaller. The piezoelectric properties significantly increase with increase in NaSbO₃ content and the piezoelectric constant and electromechanical coupling factor attain maximum values of d₃₃=160 pC/N and k_p=0.333 at x=0.01. The results indicate that (1−x)Bi_0.5(Na_0.82K_0.18)_0.5TiO₃−xNaSbO₃ ceramic is a promising lead-free piezoelectric candidate material.     

Dielectric and piezoelectric properties of lead-free (Na0.5K0.5)NbO3-SrTiO3 ceramics

In this article, we report successful preparation of dense [(Na_0.5K_0.5)_1−xSr_x](Nb_1−xTi_x)O₃ (x=0.005-0.100) ceramics by ordinary sintering in air. The dependence of phase structure on doping content of SrO and TiO₂ has been determined by the X-ray diffraction technique. It was found that the crystal structure changed from orthorhombic to tetragonal at x≈0.040. Dielectric study revealed that the dielectric relaxor behavior was induced by doping of SrO and TiO₂ into (Na_0.5K_0.5)NbO₃. The samples in the composition range from x=0.005 to 0.020 exhibited excellent electrical properties, piezoelectric constant of electromechanical planar and thickness coupling coefficients of k_p=26.6-32.5% and k_t=39.8-43.8%. The results show that the [(Na_0.5K_0.5)_1−xSr_x](Nb_1−xTi_x)O₃ ceramics are one of the promising lead-free materials for electromechanical transducer applications.     

Site occupation of doping La3+ cations and phase transition in Na0.5Bi0.5TiO3–BaTiO3 solid solution

The effects of La doping on the ferroelectric properties of 0.92Na0.5Bi0.5TiO3-0.08BaTiO3(NBT-BT) solid solution have been studied both experimentally and theoretically.The experimental results show that an abnormal ferro-toantiferroelectric phase transition is induced by La doping in NBT-BT.The first-principles calculations indicate that La3+ cations selectively substitute for the A site in NBT-BT as donors.Furthermore,the computed binding energy reveals that La cations is most likely to substitute Ba 2+or Na+,not Bi3+,at A site as donors in NBT-BT,as supported by our Raman spectra.The ferro-to-antiferroelectric phase transition of La-doped NBT-BT is believed to originate from the lattice aberrance and redistribution of valence electrons,thus strengthening the bonding of A-O,enhancing the hybridization between the A cation d orbital and O 2p orbital,and resulting in the deflection of the polar direction of NBT-BT lattice.     

Ferroelectric-relaxor behavior of (Na0.5K0.5)NbO3-based ceramics

We report that ferroelectric-relaxor behavior is induced by doping of SrO and TiO₂, or BaO and TiO₂ into classic ferroelectric (Na_0.5K_0.5)NbO₃. It is found that [(Na_0.5K_0.5)_0.9Sr_0.1](Nb_0.9Ti_0.1)O₃ ceramics exhibit a pronounced ferroelectric-relaxor behavior, comparable to that of [(Na_0.5K_0.5)_0.9Ba_0.1](Nb_0.9Ti_0.1)O₃ ceramics. Our results indicate that the relaxor behavior is closely related to the appearance of micropolar regions in these systems. The relaxor behavior should arise from the dynamic response of micropolar clusters. Raman spectra of [(Na_0.5K_0.5)_1−xSr_x](Nb_1−xTi_x)O₃ ceramics measured in the wavenumber range from 100 to 1200 cm⁻¹ confirm that the first order scattering is dominant in phonon bands should result from both short-range ordered region (micropolar regions) and disordered matrix. The frequency dependence of dielectric permittivity measurements show that the relaxor behavior of SrO and TiO₂, or BaO and TiO₂ doped (Na_0.5K_0.5)NbO₃ ceramics is not a Debye type in the radio frequency range.     

Structure, electrical properties and temperature characteristics of?Bi0.5Na0.5TiO3–Bi0.5K0.5TiO3–Bi0.5Li0.5TiO3 lead-free piezoelectric ceramics

(1−x−y)Bi_0.5Na_0.5TiO₃–xBi_0.5K_0.5TiO₃– yBi_0.5Li_0.5TiO₃ lead-free piezoelectric ceramics have been prepared by an ordinary sintering technique, and their structure, electrical properties, and temperature characteristics have been studied systematically. The ceramics can be well-sintered at 1050–1150 °C. The increase in K⁺ concentration decreases the grain-growth rate and promotes the formation of grains with a cubic shape, while the addition of Li⁺ decreases greatly the sintering temperature and assists in the densification of BNT-based ceramics. The results of XRD diffraction show that K⁺ and Li⁺ diffuse into the Bi_0.5Na_0.5TiO₃ lattices to form a solid solution with a pure perovskite structure. As x increases from 0.05 to 0.50, the ceramics transform gradually from rhombohedral phase to tetragonal phase and consequently a morphotropic phase boundary (MPB) is formed at 0.15≤x≤0.25. The concentration y of Li⁺ has no obvious influence on the crystal structure of the ceramics. Compared with pure Bi_0.5Na_0.5TiO₃, the partial substitution of K⁺ and Li⁺ for Na⁺ lowers greatly the coercive field E _c and increases the remanent polarization P _r of the ceramics. Because of the MPB, lower E _c and large P _r, the piezoelectricity of the ceramics is improved significantly. For the ceramics with the compositions near the MPB (x=0.15–0.25 and y=0.05–0.10), the piezoelectric properties become optimum: piezoelectric coefficient d ₃₃=147–231 pC/N and planar electromechanical coupling factor k _P=20.2–41.0%. In addition, the ceramics exhibit relaxor characteristic, which probably results from the cation disordering in the 12-fold coordination sites. The depolarization temperature T _d shows a strong dependence on the concentration x of K⁺ and reaches the lowest values at the MPB. The temperature dependences of the ferroelectric and dielectric properties at high temperatures may imply that the ceramics may contain both the polar and non-polar regions at temperatures above T _d.     

Na0.5K0.5NbO3-BiFeO3 lead-free piezoelectric ceramics

Lead-free (Na_0.5K_0.5)NbO₃-based piezoelectric ceramics were successfully fabricated by substituting with a small amount of BiFeO₃ (BF). Difficulty in sintering of pure NKN ceramics can be eased by adding a few molar percent of BF, and the crystalline structure is also changed, leading to a morphotropic phase boundary (MPB) between ferroelectric orthorhombic and rhombohedral phases. The MPB exists near the 1-2 mol% BF-substituted NKN compositions, exhibiting enhanced ferroelectric, piezoelectric, and electromechanical properties of P_r=23.3 μC/cm², d₃₃=185 pC/N, and k_p=46%, compared to an ordinarily sintered pure NKN ceramics. The MPB composition has a Curie temperature of ∼370 °C, comparable to that of some commercial PZT materials.     

Piezoelectric and ferroelectric properties of [(K0.4725Na0.4725)Li0.055]NbO3–(Ag0.5Li0.5)TaO3 lead‐free ceramics

New lead‐free piezoelectric (1 – x)[(K_0.4725Na_0.4725)Li_0.055]NbO₃– x (Ag_0.5Li_0.5)TaO₃ [(1 – x)KNNL–x ALT] ceramics were prepared by conventional sintering. Piezoelectric and ferroelectric properties and Curie temperature of the ceramics were studied. The (1 – x)KNNL–x ALT (x = 0.04) ceramics exhibit good properties (d₃₃ ～ 252 pC/N, k_p ～ 41%, T_C ～ 471 °C, T_o–t = 47 °C, P_r = 33.1 μC/cm², E_c = 10.6 kV/cm). These results show that (1 – x)KNNL–x ALT (x = 0.04) ceramic is a promising lead‐free piezoelectric material for high temperature application. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

(1-x)(K0.5Na0.5)NbO3-xSrTiO3陶瓷的弛豫铁电性能

通过对（1-x）（K_0.5Na_0.5）NbO₃-xSrTiO₃（0≤x≤0.15）陶瓷的相组成、晶体结构和介电性能的研究发现,该陶瓷为单一的钙钛矿结构相.当x含量较小（x＜0.1）时为正交相结构,x≥0.1时转变为四方相结构.随着SrTiO₃掺杂量的增加,样品的致密度增加,样品由正常铁电相逐渐向弥散铁电相转变,且相 关键词： 弛豫铁电体 0.5Na_0.5）NbO₃铁电陶瓷')" href="#">（K_0.5Na_0.5）NbO₃铁电陶瓷 3掺杂')" href="#">SrTiO₃掺杂 相变温度     

Crystalline structural phase boundaries in (K,Na,Li)NbO 3 ceramics

Lead-free (K_xNa_1−x)_1−yLi_yNbO₃ ceramics (with x=0.50, y=0–0.08 and x=0.30–0.70, y=0.06, respectively) were synthesized using the conventional solid-state reaction technique. Compositional influences of K, Na and Li constituents on microstructures, crystalline structures, dielectric and piezoelectric properties were investigated. It has been known that microstructures change largely with the alkali constituents and that there exist three orthorhombic-tetragonal phase boundaries at room temperature. One occurs in (K_0.50Na_0.50)_1−yLi_yNbO₃ ceramics at y=0.05–0.06, which corresponds to the previously reported morphotropic phase boundary (MPB). The other two appear in (K_xNa_1−x)_0.94Li_0.06NbO₃ ceramics near x=0.40 and x=0.60, respectively. (K_0.50Na_0.50)_0.935Li_0.065NbO₃ and (K_0.45Na_0.55)_0.94Li_0.06NbO₃ ceramics show high piezoelectric properties with the d₃₃ values over 200 pC/N and the k_p values around 45% at room temperature. It is thought that the observed high piezoelectric properties are largely affected by the temperature-driven orthorhombic-tetragonal phase transition.     

Microstructures and microwave dielectric properties of La1-xBx(Mg0.5Sn0.5)O3 ceramics

The microwave dielectric properties of La_1-xB_x(Mg_0.5Sn_0.5)O₃ ceramics were examined with a view to their exploitation for mobile communication. The La_1-xB_x(Mg_0.5Sn_0.5)O₃ ceramics were prepared by the conventional solid-state method with various sintering temperatures. The X-ray diffraction patterns of the La_0.995B_0.005(Mg_0.5Sn_0.5)O₃ ceramics revealed no significant variation of phase with sintering temperatures. A maximum apparent density of 6.58 g/cm³, a dielectric constant (ε_r) of 19.8, a quality factor (Q × f) of 41,800 GHz, and a temperature coefficient of resonant frequency (τ_f) of −86 ppm/°C were obtained for La_0.995B_0.005(Mg_0.5Sn_0.5)O₃ ceramics that were sintered at 1500 °C for 4 h.     

Phase structure,electrical properties,and stability of 0.96(K0.48Na0.52)1−xLixNbO3–0.04Bi0.5Na0.5ZrO3 lead-free piezoceramics

In this work, 0.96(K_0.48Na_0.52)_1−xLi_xNbO₃–0.04Bi_0.5Na_0.5ZrO₃ lead-free piezoceramics were prepared using the conventional solid state reaction method in order to attain both a high T_C and an enhanced d₃₃. The effect of Li content on their phase structure, electrical properties, and stability was systematically investigated. These results indicate that adding Li could result in the increase of T_C and the decrease of T_O–T. Here we obtain the ceramics with an orthogonal–tetragonal phase boundary in the composition of x = 0.02, and then enhanced piezoelectric properties and a high Curie temperature (i.e., d₃₃ ∼ 255 pC/N, k_p ∼ 41%, and T_C ∼ 360 °C) were observed, showing the realization of our objective. In addition, a good stability of piezoelectric and ferroelectric properties has been shown in such a material system.