向列相液晶电流体不稳定性——偏置电场效应

本文考虑了外电场与液晶盒玻璃片法线成倾角θ₀时,沿面排列的向列相液晶(θ_α<0,σ_α>0)的电流体不稳定性现象。在Dubois-Violette等人的一维理论的基础上,我们获得了直流、正弦波和矩形波三种电场激发下的失稳条件。重要结果包括:(1)电荷弛豫时间随θ₀单调上升。(2)对于MBBA液晶,存在一个临界角θ_c(ω)(ω是外场频率),当θ₀>θ_c(ω) 关键词：     

脉冲强磁场电路系统的最佳设计——理论和方法

本文综合考虑了线圈、电源和电路等各种因素,尤其考虑了热效应,建立一个设计电容器放电型脉冲磁体的理论方法。只要给出设计要求:B_0,a_1,b,t_m,σ,λ,V,就可以用本文给出的方法求出磁体的最佳结构参数和电路设计参数(i_0,a_2,L,C,N,l,s和I_(max))。 理论指出,对实验上得到的受力密度σ=1.25×10~9N/m~2,合理地设计磁体,磁场可达近百万高斯,而且能源(电容c)可以大大降低。     

n+1维双sine-Gordon模型的Coleman相变

本文计算了n+1维双sinc-Gordon模型的高斯有效势,在高斯有效势近似下,证明:n≥3的模型是平凡的,n<3的模型存在一个Coleman相交点,临界耦合参数为β_cr=(2ⁿ⁺²π^(n+1)/2(α_1R+α_2R/4)^(3-n)/2)/(Γ(1/2(3-n))(α_1R+α_2R/16)). 关键词：     

Li2K(IO3)3与Li2NH4(IO3)3的晶体结构

本文用X射线粉末法测定了Li₂K(IO₃)₃与Li₂NH₄(IO₃)₃的晶体结构和原子参数。发现Li₃K(IO₃)₃,Li₂NH₄(IO₃)₃与Li₂Rb(IO₃)₃同晶型,属单斜晶系,空间群为P2₁/α,每个单胞含有四个化合式量。室温的点阵常数分别为α=11.198?,b=11.046?,c=8.254?,β=111.53°,及α=11.327?,b=11.078?,c=8.341?,β=111.87°。讨论了二元化合物的形成与离子半径的关系。 关键词：     

非晶Ni-P合金晶化过程中生成的六角亚稳相(Ⅲ)——六角多型体

利用电子显微镜旋转晶体法发现了非晶Ni-P合金晶化过程中生成的另外两个新的六角亚稳相(α₂相与α₃相)。它们与文献[3]报道的六角亚稳相(α₁)具有相同的α值(6.73?),但c值分别为α₁的3/2倍与4倍,表明这些相属于长周期多型体结构,α₂相具有六角密堆结构的消光规律。此外,还证实了α₁中的面心立方亚点阵(α=5.50?)实际上是一个单独的面心立方亚稳相,这些六角亚稳相就 关键词：     

磁无序及合金化效应影响Co2CrZ(Z=Ga,Si,Ge)合金相稳定性和弹性常数的第一性原理研究

采用确切的Muffin-Tin轨道结合相干势近似方法,本文系统计算研究了0 K下,磁无序及合金化效应影响Co₂CrZ(Z=Ga,Si,Ge)合金L2₁和DO₂₂相稳定性的规律性及物理机理.研究结果表明,0 K下,L2₁相合金晶格常数、体弹性模量、磁矩和弹性常数均与理论和实验值基本吻合;铁磁下合金具有L2₁结构,随磁无序度(y)的增大,L2₁相能量相对逐渐增大,最终由低于转变到高于D0₂₂相,因此,当y≥0.1(0.2)时,Z=Si和Ge(Z=Ga)的合金具有DO₂₂相稳定结构;随y的增大,L2₁相的四方剪切弹性模量(C’=(C₁₁-C₁₂)/2)还不断软化,表明无论在能量还是力学角度上,磁无序都有利于3种合金发生四方晶格变形;磁无序影响L2₁和D0₂₂相相对稳定性的电子结构机理归因于Jahn-Teller...     

碘酸镁晶体的结构与相变

本文用差热分析、高温和室温X射线衍射分析等方法研究了Mg(IO₃)₂·4H₂O的相变过程: Mg(IO₃)₂·4H₂O晶体属单斜晶系,空间群为P2或Pm,每个晶胞含有两个化合式量,点阵常数为a=8.307?,b=6.627?,c=8.541?,β=1.00°45′。我们用X射线粉末法测定了α-Mg(IO₃)₂的晶体结构。α-Mg(IO₃)₂属六角晶系,其空间群是P6₃。在14℃的点阵参数为a=5.4777?,c=5.1282?,c/a=0.9362。每个单胞含一个化合式量,6O^II占据在6(c)等效位置上,21^V占据在2(b)等效位置上,Mg⁺⁺无序地占据着2(a)等效位置的一半。其原子参数为x_c=0.096,y_c=0.344,z_c=0.162,z_b=0,z_a=0.981。从结构来看,它与α-LiIO₃同晶型,所不同的是2(a)位置只有一半被Mg⁺⁺离子占据着,另一半为空位。 关键词：     

YTi(Fe1-xCox)11的磁性和穆斯堡尔谱的研究

YTi(Fe_1-xCo_x)₁₁在012型四方结构,居里温度随Co含量的增加而提高,本文为了揭示YTi(Fe_1-xCo_x)₁₁磁性与微观结构的联系,对这一系列化合物进行穆斯堡尔谱研究,在室温下,测量YTi(Fe_1-xCo_x)₁₁(其中x=0.0,0.2,0.4)的穆斯堡尔谱,最佳拟合结果证实在这种化合物中,Co原子优先占据j和f晶位,在所测样品中,超精细场在x=0.2处出现极值,这与YTi(Fe_1-xCo_x)₁₁饱和磁化强度测量结果相符合。并对YTi(Fe_1-xCo_x)₁₁,Y₂(Fe_1-xCo_x)₁₄和YTi(Fe_1-xCo_x)₁₁的穆斯堡尔谱的实验结果进行比较,分析在YTiFe₁₁中与Y₂Fe₁₄B中的3d电子能带结构的差异。 关键词：     

激光拍频波加速器的参数选择

本文研究了激光拍频波加速器中的三波相互作用过程。结果表明:适当地选择参数σ=ω_p/(ω₁-ω₂)以及β=ω₂/ω₁(ω_p,ω₁,ω₂分别为等离子体频率及两束激光频率),即可用较弱的激光造成很强的拍频等离子体波,并使注入等离子体的电子获得显著的能量增益。 关键词：     

Hg蒸汽中通过双光子共振四波差频产生调谐真空紫外辐射

利用Hg原子6¹S₀—6¹D₂和6¹S₀—6³D₂双光子共振的四波差频(2ω₁—ω₃),获得了真空紫外相干辐射(ω₄)。当入射光之一(ω₃)波长调谐时,产生的真空紫外光也是调谐的,调谐范围为184.9-187.5nm.本文对非线性频率变换过程的机 关键词：     

An Efficacious Target-Field Approach to Design Shim Coils for Halbach Magnet of Mobile NMR Sensors

The main magnetic fields of mobile nuclear magnetic resonance (NMR) magnets differ from those of conventional NMR and magnetic resonance imaging (MRI) magnets. In the Halbach magnet, the main field B ₀ is perpendicular to the longitudinal axis, the symmetry of the current distribution with respect to the symmetry of the magnetic field differs from that in conventional target-field applications, and the current distribution on the coil surface cannot be expressed in terms of periodic basis functions. To obtain the winding pattern of the coil, an efficacious target-field approach. The surface of a coil is divided into small discrete elements, where each element is represented by a magnetic dipole. From the stream function of the elements, the resultant magnetic field is calculated. The optimization strategy follows an objective function defined by the power dissipation or efficiency of the coil. This leads to the optimum stream function on the coil surface, whose contour lines define the winding patterns of the coil. This paper shows winding patterns designed of shim coils for Halbach magnet and illustrates the craft of a shim coil using flexible printed circuit board. The performance of the coils is verified by simulating the fields they produce over the sensitive volume.     

The bruker high-frequency-EPR system

The design and performance of the first commercial 94 GHz continuous-wave (CW-)/Fourier transform (FT-) EPR and ENDOR spectrometer are described. The spectrometer design is based on a heterodyne microwave bridge using an X-band intermediate frequency (IF), a hybrid magnet system, a variable-temperature, top-loading TeraFlex probehead with a TE₀₁₁ cavity as well as the ELEXSYS-line digital electronics and the Xepr software package. The W-band bridge can be driven by a CW- or pulse-IF unit and delivers a microwave power of 5 mW at 94 GHz. In pulse mode the power is sufficient for a π/2 pulse of 100 ns at a resonatorQ-value of 3000. The magnet system consists of a 6 T split-coil superconducting magnet and a water-cooled room-temperature coil. The main coil can be swept over the full range from 0 to 6 T. The room-temperature coil has a 800 G sweep range around the persistent field of the main magnet. The ENDOR probe features a tuned circuit for¹H nuclei allowing an RF π-pulse of 8 μs with a 200 W amplifier. A broad-band setup is used for other nuclei. The E680 FT-EPR system utilizes the PatternJet pulse programmer and the SpecJet high-speed transient signal averager. The concerted action of these two devices results in a pulse EPR sensitivity equal or higher than in CW-EPR. Selected examples indicating the performance of the 94 GHz CW/FT-EPR and ENDOR systems are shown.     

Simple mobile single-sided NMR apparatus with a relatively homogeneous B0 distribution

This work presents a simple design for a mobile single-sided nuclear magnetic resonance (NMR) apparatus with a relatively homogeneous static magnetic field (B₀) distribution. In the proposed design, the B₀ magnetic field of the apparatus is synthesized using only two permanent magnet blocks, i.e., a cube (main) magnet and a small shim magnet placed above the main magnet. The magnetic flux of the shim magnet partially cancels out that of the main magnet, subsequently creating a smooth B₀ profile above the shim magnet where low-resolution NMR experiments are performed. Compared with many previously published designs, this straightforward design simplifies the construction of the apparatus and simultaneously generates a B₀ field parallel to the apparatus surface, allowing the use of a simple loop-type radiofrequency (RF) coil. Additionally, an apparatus prototype is constructed according to the proposed design. Weighing only 1.8 kg, the constructed apparatus has a compact structure and can be held in the palm of a hand. The apparatus generates a B₀ strength of about 0.0746 T. Within a B₀ field deviation of 3 mT, the region with a relatively homogeneous B₀ distribution extends to about 11 mm above the shim magnet. The proposed apparatus can detect a clear Hahn echo or Carr-Purcell-Meiboom-Gill (CPMG) echoes of a pencil eraser block or a bottle of oil placed on the apparatus in 5 s with signal averaging using an RF transmitter power of only 19 W; the detection range of the apparatus exceeds 6 mm. The strength of the residual static magnetic field gradient of the apparatus is roughly estimated at 0.58 T/m. Applying different CPMG echo spacings in this residual static gradient leads to various transverse relaxation time (T₂) contrasts for liquids with distinct viscosities such as water and oil. Two nondestructive inspection applications of the apparatus, including correlating the concentrations of magnetic nanoparticle solutions with their measured transverse relaxation rates (R₂) and monitoring the outgassing from an opened bottle of oxygen-supersaturated water by measuring its longitudinal relaxation rate (R₁), are also demonstrated.     

An experimentally validated electromagnetic energy harvester

A relatively simple method for determining the electromechanical parameters of electromagnetic energy harvesters are presented in this paper. The optimal power generated through a load resistor at both off-resonance and resonance is derived analytically. The experimentally measured performance of a rudimentary electromechanical energy harvester using a rare-earth magnet shows good agreement with the results from the model. The parasitic generator coil resistance can have a profound effect on the overall performance of an electromagnetic generator by essentially acting to degrade the effective coupling coefficient. Data from the setup electromagnetic generator shows normalized power densities of 1.7 μW/[(m/s²)² cm³] operating at a resonance frequency of 112.25 Hz. This power density is comparable with other electromagnetic devices of the same volume operating at these frequencies. The power output of the presented electromagnetic generator is comparable to equivalent piezoelectric generators.     

Optimization calculations of polyhelix coils for hybrid magnets

In order to generate very high, steady magnetic fields for research in solid-state physics one can combine a high-power resistive magnet with an outer superconducting coil. If magnetic fields above 30 Tesla have to be produced it is advisable to use a water cooled polyhelix copper coil as an inner part of such a hybrid magnet. An algorithm is described which allows the optimization of the design paramaters of a polyhelix coil in an external magnetic field with respect to dimensions and material for various values of the heat flux. The calculations show that with an outside field of 13 Tesla generated by a Nb₃Sn−NbTi coil and with a 10 MW polyhelix magnet made of Cu (Al₂O₃) and Cu−Ag continuous magnetic fields around 40 Tesla may be generated in a 3 cm room temperature bore.     

在Tokamak装置中用中空超导环段冻结环向磁场的设想

本文提出一个设想:即将n个中空超导圆柱体放置于n饼纵场线圈之中,分段冻结环向磁场,则其所需要的电功率将比常规线圈降低到2/n倍。我们知道超导材料的冻结场可近似地写为。H_fj(r,T)=H_fj(r,0)[1-(T/(T_c))²。因此选定T=T₁,当轴向场H在大圆环的内壁达到H≥H_fj(r,T₁)时,中空体的内边缘达到临界场,则场进入中空区,再使H降到零,中     

一维量子sine-Gordon模型的元激发谱

应用自洽量子微扰理论研究了由参量α₀及β₀所描述的一维量子sine-Gordon模型的元激发谱，并通过玻色化技术将所得结果与Thirring模型及半满的Hubbard模型的严格解比较．研究结果表明，导出的元激发谱描述了量子孤子及反孤子的配对激发，而自洽场给出的能隙在α₀＜1及4π≤β²₀≤8π时与严格解的结果符合较好 关键词：     

α-碘酸锂的电流弛豫和偏压场作用下表观介电常数弛豫行为

本工作较为详细地测定了静电场作用下α-碘酸锂的电流弛豫行为:在撤去c轴方向上的静电场后,从我们所用测量电流仪器的响应时间到某一t_k的区间内,放电电流服从(t/t₀)^-α的负幂次方律;而在t>t_k,其规律近似地为:(t/t₀)^{(-α′ln(t/t₀))}。相关的弛豫参数α,α′和t_k在有限的范围内,依赖于温度和施加电压的大小,也因样品不同而有差异。对将近十个样品进行了测试,结果表明,大多数晶体在尽可能小的电压下0.43≤α≤0.7,0.07<α′<0.09;上述的电流弛豫表达式与α-碘酸锂在偏压场作用下观察到的其它物理现象的弛豫行为,与在中子衍射加强和表观介电常数中的表现如出一辙;可以初步肯定各种现象的弛豫行为具有相同的物理根源。 关键词：     

Optimization of long-period grating inscribed in large mode area photonic crystal fiber for design of bandstop filter

By inscribing long period grating (LPG) in a photonic crystal fiber (PCF), optical filters for communication wavelengths can be fabricated. In this paper, by utilizing coupled-mode theory and enhanced improved vectorial effective index method, a design of bandstop filter based on optimal LPG parameters is presented where the optimized full-width half-maximum (FWHM), the number (N) and total length of gratings of LPGs (L) are determined. As a result, by the determination of optimized LPG parameters with an optimum length of L_opt=6.5 mm and optimum number of grating N_opt=27 inscribed in the PCF, a bandstop optical filter with FWHM=1 nm is designed.     

非晶态超导体的2△0/(kBTc)和声子谱参量

提出了能够很好地描述非过渡金属无序和非晶态超导体的2Δ₀/(k_BT_c)与声子谱参量之间关系的一个公式:2Δ₀(k_BT_c=4.95[1-(T₀<ω>^1/2)/A(1/(λω₀)+1/(20λ<ω>)+1/(20<ω>))]。计算了大量已知声子谱的非晶和无序超导体的能隙2Δ₀对T_c的比,结果表明在百分之几的范围内与实验值符合。指出了非过渡金属和合金的非晶态超导体,既可以是一个2Δ₀/(k_BT_c)值远大于BCS理论值(3.53)的强耦合超导体,也可以是一个2Δ₀/(k_BT_c)值比BCS理论值还要小得多的弱耦合超导体。 关键词：