ECR氧离子源及整体分离环RFQ加速器低能输运系统的研制

根据研制分离作用RFQ和升级改造1MeV ISR RFQ的需要,设计了一台ECR 0+离子源及低能输运(LEBT)系统.低能输运系统使用2个静电透镜聚焦柬流,在引出电压22kV时,EBT末端得到6mA以上总脉冲束流、束流归一化均方根发射度为0.127πmm.mrad.束腰可前后移动160mm.     

ADS强流质子加速器低能传输段发射度匹配研究北大核心CSCD

研制了一套强流质子源及低能传输线(LEBT)注入器用于ADS质子直线加速器。质子源产生35 ke V强流束经过低能传输段聚焦进入射频四极(RFQ)入口。低能传输段不匹配是强流RFQ中引起束流丢失的主要原因。不同加速段的束流匹配是减少束流损失与抑制发射度增长的重要手段。束流损失导致RFQ电极表面受热变形进而引起高频打火,降低RFQ长期运行的稳定性。针对以上问题,研究LEBT发射度在不同的实验条件下如何实现加速器更好的匹配。研究结果表明,LEBT出口束流在35 ke V,10 m A下,束流发射度小于0.2πmm·mrad,当LEBT螺线管电流为210和270 A时,束流在RFQ入口满足匹配条件。     

ADS强流质子加速器低能传输段发射度匹配研究

研制了一套强流质子源及低能传输线(LEBT)注入器用于ADS质子直线加速器。质子源产生35 ke V强流束经过低能传输段聚焦进入射频四极(RFQ)入口。低能传输段不匹配是强流RFQ中引起束流丢失的主要原因。不同加速段的束流匹配是减少束流损失与抑制发射度增长的重要手段。束流损失导致RFQ电极表面受热变形进而引起高频打火,降低RFQ长期运行的稳定性。针对以上问题,研究LEBT发射度在不同的实验条件下如何实现加速器更好的匹配。研究结果表明,LEBT出口束流在35 ke V,10 m A下,束流发射度小于0.2πmm·mrad,当LEBT螺线管电流为210和270 A时,束流在RFQ入口满足匹配条件。     

直接等离子体注入模式下激光离子源与RFQ匹配的模拟研究

基于直接等离子体注入(Direct Plasma Injection Scheme,DPIS)的方法,设计并建造了一台低能段离子加速装置;目前实验上利用该方法成功地加速了峰值流强为11.28 m A,能量为593 ke V/u的C6+脉冲束流。考虑到激光离子源产生的束流为脉冲束,且具有能散大,强度高等特点,给低能传输线(LEBT)的设计带来很大的困难,而DPIS方法则简单易行,可有效地提高注入效率;因此该装置将激光离子源与RFQ直接连接在一起,将离子源产生的等离子体直接注入到RFQ,并没有采用传统的LEBT。并采用IGUN程序对该注入方法进行了模拟,计算确定了离子源引出的强流脉冲束的参数以及注入效率,模拟的结果与实验的测量值一致。     

用于1MeV 分离作用RFQ加速器改造的ECR氧离子源及LEBT系统的研制

An ECR O~ ion source and LEBT system have been developed for the upgrade of 1MeV Integral Split Ring RFQ at Peking University.To satisfy the requirement of RFQ,a more than 10mA oxygen beam has been extracted at 22kV through a 5mm diameter aperture.Its normalized root-mean-square emmitance is less than 0.1π·mm·mrad,which is required by RFQ accelerator.The LEBT matching section is redesigned upon the bench test results.The preliminary results will be presented in this paper.     

分离作用RFQ加速系统研究进展

介绍了SFRFQ加速系统的最新研究进展. 为验证SFRFQ结构的抗打火性能, 设计了一个高功率模型腔, 进行了高功率打火实验, 并最终证明了该结构的可行性. 为验证SFRFQ加速器的载束性能, 设计了一台长度仅为1m的600keV O⁺ SFRFQ加速器, 它将把从1MeV ISR RFQ引出的O⁺离子加速到1.6MeV. 为解决1MeV ISR RFQ引出束流与SFRFQ加速器的横向匹配问题, 在其间插入了一个三单元磁四极透镜. SFRFQ加速器加工和1MeV ISR RFQ改造的进展顺利.     

用于强流中子发生器的低能束流传输线的设计模拟

兰州大学设计研发的ZF-400强流中子发生器设计D-T中子产额6×1012 n/s,主要由ECR离子源、低能束流传输线（LEBT）、加速管、旋转靶等部分组成。LEBT负责将从离子源引出的束流进行分析聚焦并注入到加速管中。LEBT对束流的聚焦及分析的好坏程度决定了加速管中束流的损失程度、中子的产额以及靶的寿命。本工作就该强流中子发生器所需的低能传输线进行了设计。使用螺线管、分析磁铁和四极透镜组合的方案。利用TRACK软件对此方案进行模拟,得到符合要求的束流线及元件的参数。用TraceWin进行了验证模拟,验证结果符合要求。另外,通过软件模拟确定了杂质离子损失的位置,据此设计了束流管道冷却方案。通过模拟发现,这种透镜的组合方式可以让整个LEBT以较低的功率获得低损失、高纯度的打靶束流。The ZF-400 Intense Neutron Generator, which is designed by Lanzhou University with an expected neutron yield of 6×1012 n/s, is consist of ECR ion source, low energy beam transport (LEBT) line, accelerating tube and rotating target. The beam extracted from ECR source is analyzed and focused through LEBT, then, the beam is introduced into the accelerating tube. The focus and analysis ability of LEBT is very important for the beam loss, neutron yield and target's life. A LEBT line for intense neutron generator is designed in this paper, the project consisted of a solenoid, a bend magnet and three quadrupole lens. The qualified LEBT and its parameters have been got through the simulation with TRACK code. Then TraceWin program was employed to check this simulation and the result satisfied our requirement. Besides, the loss position of impurity ions was known through the simulation, and a project of beam line's cooling system was designed according to this result. Through the simulation, we find the optimal lens combination plan which can obtain lower beam loss and higher beam purity at low running power of LEBT.     

分段共振耦合RFQ场调谐方法研究

强流质子加速器需要采用分段共振耦合RFQ作为其低能加速结构,为减少束流损失,RFQ加速器必须达到所要求的场分布.针对共振耦合结构的特殊性,在RFQ传输线模型的理论基础上,在一台RFQ冷模型上进行了场调谐的实验研究,获得了满意的实验结果.同时,也验证了作者用LabVIEW编写的RFQ场调谐程序的正确性.     

带空间电荷效应的横向发射度测量（英文）

CADS注入器Ⅰ试验装置由中国科学院高能物理研究所承建。其10mA的束流由RFQ结构加速到3.2 MeV,经中能传输段匹配到超导加速结构。为了减小失匹配造成的束流损失,需要测量RFQ出口束流参数,以便调整中能传输段Lattice结构,使束流能匹配进入超导腔。CADS注入器Ⅰ采用丝靶扫四极铁参数的方式测量束流截面并计算RFQ出口Twiss参数。强流加速器在低能段空间电荷力很强,常规的基于矩阵的数据处理方法会带来误差。本文分别用常规的未考虑空间电荷效应的矩阵方法和考虑了空间电荷效应的遗传算法对数据进行处理,得到的结果显示低能强流加速器进行Twiss参数测量时,必须考虑空间电荷效应的影响。     

带空间电荷效应的横向发射度测量

CADS注入器Ⅰ试验装置由中国科学院高能物理研究所承建。其10 mA的束流由RFQ结构加速到3.2 MeV,经中能传输段匹配到超导加速结构。为了减小失匹配造成的束流损失,需要测量RFQ出口束流参数,以便调整中能传输段Lattice结构,使束流能匹配进入超导腔。CADS注入器Ⅰ采用丝靶扫四极铁参数的方式测量束流截面并计算RFQ出口Twiss参数。强流加速器在低能段空间电荷力很强,常规的基于矩阵的数据处理方法会带来误差。本文分别用常规的未考虑空间电荷效应的矩阵方法和考虑了空间电荷效应的遗传算法对数据进行处理,得到的结果显示低能强流加速器进行Twiss参数测量时,必须考虑空间电荷效应的影响。     

Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.