激光产生蒸汽羽的干涉研究

 根据拍摄1.06 μm长脉冲钕玻璃激光与LY12铝靶耦合产生蒸汽羽的干涉分幅照片，测出在t<50 μs空气冲击波速度约为473 m/s而蒸汽羽阵面扩散速度约为162 m/s。运用蒸汽羽等离子体的有关热力学特性方程组，得到蒸汽羽等离子体的电子密度、电子温度、电离度和吸收系数的最大值分别为N_e≈3.1×10¹⁷ cm^-1，T≈6 096 K，η≈0.014，α_(1.06μm)≈0.03 cm^-1的结果。     

铝靶动态激光反射率的数值模拟

 从金属近自由电子模型——Prude/Fresnel理论出发，分析了激光作用下铝靶表面反射率的动态变化规律。通过对铝电导率与温度变化关系的数值模拟，得到了凝聚态、液态、气态反射率的动态变化规律，且与实验结果基本符合。当激光功率密度处于10¹¹~10¹⁵ W/cm^-2范围内时，由等离子体模型和局部热力学平衡（LTE）理论，亦得到了反射率随温度变化的数值模拟结果，与国外的实验结果符合得较好。     

X形色心激光谐振腔参数的确定及类F2+型色心激光运转

文中,针对X形谐振腔的特点及结合纵向泵浦理论,分析了X形谐振腔几何参数的确定条件和模式匹配条件;根据有关NaCl(OH^-):(F₂⁺)_H和KCl(Na⁺,OH^-):(F₂⁺)AH色心激光的主要研究结果,分析了提高色心激光输出效率的可能途径.     

辅助光对NaCl(OH-)和KCl(Na+,OH-)晶体中的类F2+型色心激光输出的影响

文中报进了有关辅助光对NaCl(OH^-):(F₂⁺)_H及KCl(Na⁺,OH^-):(F₂⁺)_AH色心激光输出功率影响的主要研究结果。初步探讨了辅助光作用的物理机制。     

1—p壳超核系统学研究(Ⅰ)——Λ-N有效相互作用研究

本文利用多中心壳模型的Hartree-Fock方法,引进了Volkov型的双高斯Λ-N有效相互作用位,对_Λ¹³C与_Λ⁹Be结合能给出了令人满意的结果。与拟合s波Λ-p散射数据的有效势比较,我们认为Λ-N相互作用中p波至少比s波弱1/3。此外,Majorana交换力也是重要的,但与模型有关。     

23Al及其邻近丰质子核的奇异结构研究

在RIKEN-RIPS上测量了²³Al等丰质子核素的核反应总截面(σ_R)和平行动量分布(P^//). 观察到了²³Al核反应总截面的增强, 与以前的实验结果相符. 同时得到了²³Al等丰质子核素擦掉一个质子后的P_//. 在Few-body Glauber模型下对实验结果进行了讨论. P_//的宽度显示²³Al基态的外层质子处于d态, 这与g因子测量实验结果一致. 为了同时解释P_//和σ_R的实验测量结果, 我们认为²³Al可能有核芯增大的现象.     

重层子模型中介子的衰变过程

本文利用重层子模型^[1]中得到的介子B-S波涵数讨论介子的轻子型弱衰变、电磁衰变和各种二体强衰变过程. 除了解释f_π≈f_K, 1^－→l⁺l^－等过程外, 计算得到的各种强衰变宽度也都同实验基本符合.     

高压合成的硼酸锶掺Eu2+离子发光特性的研究

 本文首次采用高压方法合成了Sr₃B₂O₆:Eu²⁺、Sr₂B₂O₅:Eu²⁺、SrB₄O₇:Eu²⁺一系列硼酸盐，研究了它们和SrB₂O₄:Eu²⁺的常压与高压合成产物的发光光谱、强度及效率的变化，以及发光与其结构的关系。由于硼酸盐在高压处理后，结构发生变化，因而光谱及发光强度均有所改变。尤其对SrB₂O₄:Eu²⁺，在适当的合成压力条件及一定的激光条件下，其量子发光效率比常压提高80倍以上。     

对A=3的Λ超核的讨论

本文利用我们以前所得到的A-N交换势,计算了_A³He和_A³H基态结合能之差,此外还计算了_A³H的两个低激发态的激发能。我们的计算结果与实验相比较还是合理的。     

凝聚炸药中超压爆轰的实验研究

 采用飞片碰撞技术，在TNT/RDX（40/60）炸药中获得了2.5倍于正常爆轰的最大超压值，得到了超压爆轰下爆轰产物物态方程p=Aρ^{k+A₁(p-p_J)}（p－爆压，单位GPa，ρ－密度，单位kg/m³，A=ρ_J/ρ^k_J，p_J=27.06 GPa，ρ_J=2.3×10³ kg/m³，k=2.77，A₁=2.7×10^-3 GPa^-1，下表J代表正常爆轰状态）。该方程还可以较好地描述超压爆轰产物的二次冲击状态。     

Scattering-Enhanced Femtosecond Optical Parametric Generation

Scattering-enhanced femtosecond optical parametric generation （OPG） has been observed and studied in detail, which may decrease the pump threshold of OPGs dramatically and may make OPGs reliable. The experimental demonstration in a LiNbO3 crystal shows that strong enough OPG can be obtained at pump intensity of only about 30GW/cm2 which is well below the crystal damage threshold Either a synchronized pulsed laser or a cw laser has been used as the scattering source, of which the wavelength, spectral shape and irradiating angle are not strictly required.     

High Power Continuous-Wave and Acousto-Optic Q-Switched Nd：GdVO4 Laser Operated at 912 nm

We present a high power and efficient operation of the ^4F3/2 → ^4I9/2 transition in Nd：GdVO4 at 912nm. In the cw mode, the maximum output power of 8.6 W is achieved when the incident pump power is 40.3 W, leading to a slope efficiency of 33.3% and an optical-optical efficiency of 21.3%. To the best of our knowledge, this is the highest cw laser power at 912nm obtained with the conventional Nd：GdVO4 crystal. Pulsed operation of 912nm laser has also been realized by inserting a small aeousto-optie （A-O） Q-Switch inside the resonator. As a result, the minimal pulse width of 20ns and the average laser power 1.43 W at the repetition rate of lOkHz are obtained, corresponding to 7.1 kW peak power. We believe that this is the highest laser peak power at 912nm. Furthermore, duration of 65ns has also been acquired when the repetition rate is 100 kHz.     

Sixth Harmonic of A Nd：YVO4 Laser Generation In KBBF for ARPES

We report that a deep ultraviolet （DUV） laser from the sixth harmonic of a 1064nm laser has been firstly used as light source in an ultrahigh energy-resolution angle-resolved photoemission spectroscopy （ARPES）. The wavelength is 177.3nm obtained by using the second harmonic KBe2BO3F2 crystal with a frequency tripled 1064nm Nd：YVO4 laser. The large flux （10^14 - 10^15 photons/s） and narrow line width （0.26 meV） are suitable for the ultrahigh-energy resolution ARPES. The laser-ARPES can be a powerful tool to study the electronic structure at and near the Fermi level of the superconductor and correlated materials. The laser-ARPES has worked more than 500 h already.     

Continuous-wave laser properties of 4F3/2?4I13/2 channel in the Nd3+LiNbO3:ZnO non-linear crystal

This work reports for the first time continuous-wave laser action at room temperature around 1.3 7m in Nd³⁺ doped LiNbO₃:ZnO. Optical spectroscopy has been used to determine the main laser characteristics of ⁴F_3/2‘⁴I_13/2 channel, such as emission cross section and excited-state absorption cross section at laser wavelengths. Internal optical losses have been estimated from laser gain experiments. Under non-optimal conditions laser slope efficiencies of 30% have been obtained.     

Structural Deformation of CO22+ in Intense Femtosecond Laser Fields

The angular distributions of CO^＋ from the dissociation of CO2^2＋ and CO2^＋ in intense femtosecond laser fields （45 fs, about 5 × 10^15 W/cm^2） are studied at a laser wavelength of 800nm based on the time-of-flight mass spectra of CO^＋ fragment ions. The experimental results show that structural deformation occurs in the charge state of CO2^2＋ and the CO^＋ maintains linear geometrical structure.     

一类系列脉冲激光照射真空中铝靶产生的LSD波

本文应用一维双温激光靶相互作用简化物理模型对脉宽为10ns级系列脉冲激光照射真空中铝靶产生的LSD波进行了数值研究。对于单个脉冲宽度τ_p=10ns,脉冲间距τ_p=50ns的系列脉冲情况,得到了LSD波点火的脉冲个数N_(LSD)与单脉冲归一化强度(I_s/I_(LSD))的关系。分析了系列脉冲激光LSD波点火的积累效应以及LSD波的屏蔽效应。     

Spectral Hole-Burning of Eu^3＋：Y2SiO5 Crystal at 16 K

By using an Ar^＋ ion laser, a tunable Rh 6G dye laser （linewidth 0.5cm^-1） pumped by the second harmonic of a YAG：Nd laser and a Coherent 899-21 dye laser as light sources and using a monochromator, a phase-locking amplifier and a computer as the data detecting system, we detect the optical properties of Eu^3＋-doped Y2SiO5 crystal. Persistent ,spectral hole burning （PSHB） are observed in the Eu^3＋ ions spectral lines （^5 Do-T Fo transition） in the crystal at the temperature of 16K. For 15mW dye laser burning the crystal for 0.1 s spectral holes with hole width about 80 MHz both at 579.62nm and at 579.82nm are detected and the holes can remain for a long time, more than 10h.     

Simultaneous Generation of Multi-Wavelength Laser from Nd:YAG Crystals in a Cruciform Cavity

A cruciform cavity is presented for multi-wavelength laser generation. On the basis of considering the optimal power ratio and good spatial overlap of the two fundamental beams, the maximum output power of 589 nm laser reaches 3.5 W when the pumping power of Nd：YAG A and Nd：YAG B are 311.5 W and 261.8 W, respectively. At the same time, the other wavelength lasers are also obtained with the output power distribution of 2.5 W at 66Onto, 15 W at 532nm, lOOmW at 1319nm and 240mW at 1064nm. The corresponding beam quality factors are M^2 x = 4.93, M^2 y = 5.01 at 589nm, M^2z = 4.51, M^2 y = 4.85 at 660hm, and M^2 x = 4.12, M^2 y = 3.96 at 532nm, respectively. The instabilities of the three visible lights are measured, which are also less than 2% within three hours.     

Two Kinds of Cavity Geometry for Enhanced Laser Cooling of Solids

We present a comparison between intracavity cooling and external cavity cooling for optical refrigeration. The results show that the intracavity scheme is preferred at low optical densities （〈 0.008）, while the external cavity scheme is preferred at higher optical densities （〉 0.01）. We can choose the proper scheme for different eases in experiments. Moreover, under the same conditions, taking Yb^3＋-doped ZBLAN （ZrF4-BaF2-LaF3-AlFa-NaF） film as an example, the cooling processes of the two scheme are obtained. The calculated results show that intracavity cooling will achieve a larger temperature drop for a thin film sample. Finally, the diode laser may become a candidate for the intraeavity model briefly discussed.     

Distinct orientation of AlN thin films deposited on sapphire substrates by laser ablation

We report the experimental characterization of the charged species produced in excimer laser ablation of a superconducting intermetallic compound (YNi₂B₂C). By using energy-selective time-of-flight mass spectrometry, we have obtained direct measurements of both mass spectra and kinetic energy distributions of ions. The investigation has been carried out in the laser fluence range 1-5 J cm^-2, which is typical of laser ablation thin film deposition. High kinetic energies of the charged component (up to 0.4 keV) have been observed even at moderate laser fluences.