硅量子点的形状及其弯曲表面效应

硅量子点的弯曲表面引起系统的对称性破缺, 致使某些表面键合在能带的带隙中形成局域电子态.计算结果表明:硅量子点的表面曲率不同形成的表面键合结合能和电子态分布明显不同. 例如, Si–O–Si桥键在曲率较大的表面键合能够在带隙中形成局域能级, 而在硅量子点曲率较小的近平台表面上键合不会形成任何局域态, 但此时的键合结合能较低. 用弯曲表面效应(CS)可以解释较小硅量子点的光致荧光光谱的红移现象. CS效应揭示了纳米物理中又一奇妙的特性. 实验证实, CS效应在带隙中形成的局域能级可以激活硅量子点发光. 关键词： 硅量子点 弯曲表面效应 表面键合 局域能级     

硅表面硅镱键合与量子级联结构的发光

用纳秒强激光脉冲制备了纳米硅和硅表面的硅镱键合结构,检测了纳米硅表面硅镱键合的发光特性,并对这种结构相应的光致发光(PL)和电致发光(EL)的动力学机理进行了研究。观察到纳米硅表面硅镱键合在700nm附近尖锐的强发光峰,结合第一性原理计算认为是硅镱键合在弯曲纳米硅表面的局域态发光;利用纳秒脉冲激光沉积技术(PLD)制备多晶硅薄膜,发现由硅镱界面的失配形成表面的突触,其上的硅镱键合产生带隙中的电子局域态,该局域态发光分布在1250~1650nm波长范围,有增强的EL发光;用PLD方法制备硅镱多层膜量子级联结构,测量到光通信窗口的多个发光峰,并观察到随膜层数增加且发光峰增多。     

硅量子点发光的激活及其物理模型研究

在真空或惰性气体中制备的硅量子点发光很弱,硅量子点表面被氢较好钝化后的发光也不强.硅量子点表面的硅氧键或硅氮键能破坏这种钝化并在带隙中形成局域电子态,在局域电子态对应的激活中心有很强的发光.可以用这种方式构建发光物质,控制硅量子点表面的键合可获得不同波长的发光.在硅量子点的发光激活处理过程中,退火是很重要的环节.对于硅量子点发光激活的机理,本文给出了相应的物理模型.实验证明,在600和700 nm波长附近观察到了激活硅量子点的受激发光,在1500 nm到1600 nm波长范围观察到了激活硅量子点的较强发光.     

氢化纳米硅薄膜中氢的键合特征及其能带结构分析

对氢化纳米硅薄膜中氢的键合特征和薄膜能带结构之间的关系进行了研究.所用样品采用螺 旋波等离子体化学气相沉积技术制备，利用Raman散射、红外吸收和光学吸收技术对薄膜的 微观结构、氢的键合特征以及能带结构特性进行了分析.Raman结果显示不同衬底温度下所生 长薄膜的微观结构存在显著差异，从非晶硅到纳米晶硅转化的衬底温度阈值为200℃.薄膜中 氢的键合特征与薄膜的能带结构密切相关.氢化非晶硅薄膜具有较高的氢含量，因键合氢引 起的价带化学位移和低衬底温度决定的结构无序性，使薄膜呈现较大的光学带隙和带尾宽度 .升 关键词： 氢化纳米硅 螺旋波等离子体 能带结构     

氧化硅层厚度对Si/SiO2界面电子态结构与光学性质的影响

在氧化硅上生长纳米硅晶,保持氧化硅的直接带隙结构,降低其能带带隙,以用于发光和光伏。采用基于密度泛函理论的第一性原理研究了块体α-方石英、薄膜α-方石英、Si/SiO₂界面的电子态结构和Si/SiO₂界面的光学性质。结果显示,其均为直接带隙半导体,当薄膜α-方石英厚度和Si/SiO₂界面氧化硅层厚度逐渐减小时,能带带隙均逐渐变大,表现出明显的量子限制效应。光学性质计算结果表明：Si/SiO₂界面虚部介电峰和吸收峰的峰值随氧化硅层厚度降低而显著升高,且峰位向高能量方向蓝移。使用脉冲激光沉积制备了氧化硅上硅晶薄膜,测量了Si/SiO₂界面样品的PL光谱,在670 nm处存在一个强的发光峰,在波长超过830 nm后,Si/SiO₂界面样品的发光强度不断升高。因此,可以通过控制Si/SiO₂界面氧化硅层厚度有效地调控Si/SiO₂界面的电子态结构和光学性质,引进边缘电子态,调控其带隙进入1～2 eV区间,获取硅基发光材料...     

掺氮碳化硅纳米管电子结构的第一性原理研究

采用基于密度泛函理论的第一性原理计算,对本征碳化硅纳米管和掺氮碳化硅纳米管的电子结构进行了计算.计算表明本征（8,0）碳化硅为直接带隙半导体,能带间隙为0.94 eV;掺氮浓度为1.56%和3.12％的碳化硅纳米管的能带间隙减小为0.83 eV和0.74 eV.从差分电荷密度可以看出,能带间隙的减小是氮硅键与碳硅键相比共价成键能力降低的结果. 关键词： 碳化硅纳米管 掺氮 第一性原理 电子结构     

卤化硅烯结构、电子和光学性质的第一性原理研究

二维硅烯的商业用途通常受到其零带隙的抑制,限制了其在纳米电子和光电器件中的应用.利用基于密度泛函理论的第一性原理计算,单层硅烯的带隙通过卤原子的化学官能化被成功打开了,并综合分析了卤化对单层硅烯的结构,电子和光学性质的影响.研究结果表明卤化使结构变得扭曲,但保持了良好的稳定性.通过HSE06泛函,全功能化赋予硅烯1.390至2.123 eV的直接带隙.键合机理分析表明,卤原子与主体硅原子之间的键合主要是离子键.最后,光学性质计算表明,I-Si-I单层在光子频率为10.9 eV时达到最大光吸收,吸收值为122000 cm^-1,使其成为设计新型纳米电子和光电器件的有希望的候选材料.     

不同气体氛围下硅量子点的结构及其发光机理

纳秒脉冲激光在氮气、氧气和空气等不同氛围中加工出的硅量子点都有光致荧光(PL)的发光增强效应,并且在700 nm波长附近观察到了受激辐射.在不同氛围下生成的样品有几乎相同的PL光谱分布,其原因是不同氛围下加工出的样品带隙中有相同的电子态分布.计算结果显示:当硅量子点表面被氮或氧钝化后,在带隙中能够形成几乎相同的局域电子态,这种局域电子态可以俘获来自导带的电子,从而形成亚稳态,这是PL发光增强乃至产生受激辐射的关键因素. 关键词： 硅量子点 PL光谱 发光增强 电子局域态     

表面键合对硅(111)量子面电子结构的影响

将纳米硅薄膜看成理想的一维限制的量子面结构,通过第一性原理计算研究了不同厚度的硅(111)量子面的能带结构及态密度。随着量子面厚度的变化,在Si—H键钝化较好的量子面结构上,其带隙宽度变化主要遵循量子限制效应规律。当在表面掺杂时,模拟计算表面含Si—N键的硅(111)量子面的结果表明:在一定厚度范围内,带隙宽度主要由量子限制效应决定;超过这个厚度,带隙宽度同时受量子限制效应和表面键合结构的影响。保持量子面厚度不变,表面掺杂浓度越大则带隙变窄效应越明显。同样,模拟计算含Si—Yb键的硅(111)量子面的结果也有同样的效应。几乎所有的模拟计算结果都显示:量子面的能带结构均呈现出准直接带隙特征。     

聚合物前驱体制备氮化硅纳米纤维及其发光

由聚硼硅氮烷前驱体在高温常压下热裂解得到氮化硅纳米纤维,确定了样品结构为α相,讨论了纳米纤维的生长模式属于气-液-固生长机制。在室温下用488nm激光对样品激发,观察到样品有很宽的强光致发光带,并有两个发光中心,这种强的可见光致发光主要来自氮化硅的内禀Si和N的悬键。测量了纳米纤维的室温吸收光谱,得到氮化硅纳米纤维的光学带隙为4．80eV。     

Si–Si optical phonon behavior in localized Si clusters of Si<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript> alloy nanocrystals

Raman spectra acquired from Si _x Ge_1−x -nanocrystal-embedded SiO₂ films show dependence of the Si–Si optical phonon frequency on Si content. The frequency upshifts, and peak intensity increases as the silicon concentration increases. For a given Si content, the frequency remains unchanged with annealing temperature. Spectral analysis and density functional theory calculation reveal that the optical Si–Si phonon is related to the formation of localized Si clusters surrounded by Si/Ge atomic layers in the Si _x Ge_1−x nanocrystals and the intensity enhancement arises from the larger cluster size. The synergetic effect of surface tensile stress and phonon confinement determines the Si–Si optical phonon behavior.     

Enhancement of the emission yield of silicon nanocrystals in silica due to surface passivation

The ability of surface passivation to enhance the photoluminescence (PL) emission of Si nanocrystals in SiO₂ has been investigated. Silicon precipitation in implanted samples takes place in a time scale of few minutes at 1100°C. For longer annealing at the same temperature, the PL intensity of the Si nanocrystals increases and eventually reaches saturation, while it correlates inversely with the amount of Si dangling bonds at the Si–SiO₂ interface (P_b centers), as measured by electron spin resonance. This combined behavior is independent on the silica matrix properties, implantation profiles and annealing atmosphere and duration. The observation that the light emission enhancement is directly related to the annealing of P_b centers is confirmed by treatment in forming gas. This mild hydrogenation at much lower temperature (450°C) leads to a complete passivation of the P_b defects, increasing at the same time the PL yield and the lifetime.     

Surface effects on the photoluminescence of Si quantum dots

Si quantum dots (SiQDs) with sizes ranging from 5 to 20 nm were fabricated by vapor condensation. They showed red photoluminescence (PL) in vacuum with the peak located at around 750 nm. After the specimen was exposed to air, the PL intensity became higher, and continued to increase during the PL test with a cycling of vacuum-air-vacuum. In pure oxygen, the PL intensity exhibited an irreversible decrease, while in nitrogen a smaller amount of reversible increase of PL intensity was observed. Furthermore, the PL intensity exhibited a remarkable enhancement if the SiQDs were treated with water. With HF treatment, the PL peak position showed a blue-shift to 680 nm, and was recovered after subsequent exposure to air. Si–O–H complexes were suggested to be responsible for this red luminescence. The irreversible decrease of PL intensity due to oxygen adsorption was speculated to be caused by the modification of chemical bonds on the surface. In the case of nitrogen adsorption, the PL change was attributed to the surface charging during adsorption.     

Photophysical Properties of Luminescent Quaternary Lanthanide Molecular Hybrid Systems with Chemical Bonds from the Cooperative Design and Assembly of Structure and Function

Two long chain aliphatic acyl chlorides (dodecanoyl chloride (C₁₀H₁₉OCl, abbreviated as DC) and stearoyl chloride (C₁₈H₃₅Ocl, abbreviated as SC)) were modified by means of the amidation reaction with crosslinking molecules (N-aminopropyl-triethoxylsiliane, (APES, H₂N(CH₂)₃Si(OC₂H₅)₃)) and afford two kinds of structural molecular bridge DC (SC)− APES with double reactivity. Subsequently, according to the principle of coordination chemistry, ternary lanthanide (terbium and europium) molecular complex systems with two molecular bridges DC (SC)− APES and 1,10-phenanthroline (phen) of were successfully assembled. Then the modified molecular bridges behave as structural ligands to form the covalent bond Si− O network with matrix precursor (tetraethoxysilane, TEOS) through a sol-gel process (cohydrolysis and copolycondensation process), resulting in a novel quaternary molecular hybrid material (so called as phen-Tb(Eu)−DC(SC)− APES) with strong chemical bonds (N− Tb(Eu)− O coordination bonds and Si− O covalent bonds). And phen behaves as functional ligand to sensitize the luminescence of terbium or europium ions through the effective intramolecular energy transfer process, which gives rise to the characteristic emission of metal ion.     

Buffer layer ZnO-assistant fabrication of c-axis GaN films by using pulsed laser deposition on Si(111) substrate: annealing effects in ammonia ambience

ZnO buffer layers have been used to fabricate GaN thin films by using pulsed laser deposition on Si (111) substrates. c-axis GaN thin films were obtained by annealing in NH₃ atmosphere at 950°C for 15 min. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and atomic force microscopy (AFM) have been used for the characterizations of the crystalline quality, composition, and surface morphology of the films. The annealing in ammonia (NH₃) atmosphere markedly affects the preparation of GaN films and the least annealing time is 15 min under our experimental conditions. The mechanism of the effects of the ZnO buffer layers was studied. In the beginning, Zn–O bonds are destroyed in the interface of the films; a few O and Zn atoms depart from their positions, while N and Ga atoms fill in the empty positions and form a hexagonal structure of a special component. Many bonds (such as Ga–O bonds, Zn–N bonds) existed then. The number of Zn–O bonds decreases and the number of Ga–N bonds increases in the films with increasing of the annealing time. Many other bonds (such as Ga–O bonds, Zn–N bonds) also decreased and more Ga–N bonds formed with annealing time increasing. After having been annealed for 15 min under our experimental conditions, the quality of the hexagonal structure GaN films was markedly improved by the destroying of the Zn–O bonds during high-temperature annealing.     

Mechanisms for oxygen adsorption on the Si(110) surface studied by Auger electron spectroscopy

Oxygen adsorption on the Si(110) surface has been studied by Auger electron spectroscopy. For a clean annealed surface chemisorption occurs, with an initial sticking probability of ～6 × 10^?3. In this case the oxygen o_kll signal saturates and no formation of SiO₂ can be detected from an analysis of the Si L_2,3VV lineshape. With electron impact on the surface during oxygen exposure much larger quantities are adsorbed with the formation of an SiO₂ surface layer. This increased reactivity towards oxygen is due to either a direct effect of the electron beam or to a combined action of the beam with residual CO during oxygen inlet, which creates reactive carbon centers on the surface. Thus in the presence of an electron beam on the surface separate exosures to CO showed adsorption of C and O. For this surface subsequent exposure in the absence of the electron beam resulted in additional oxygen adsorption and formation of SiO₂. No adsorption of CO could be detected without electron impact. The changes in surface chemistry with adsorption are detectable from the Si L_2,3VV Auger spectrum. Assignments can be made of two main features in the spectra, relating to surface and bulk contributions to the density of states in the valence band.     

Hydrogenation effect on enhancement of photoluminescence of Er and Si nanocrystallites in Er-doped SiO2 synthesized by laser ablation

Significant enhancement of photoluminescence (PL) was attained for Er ions and Si nanocrystallites (nc-Si) in SiO₂ films by two kinds of hydrogenation, using H₂ molecules or H atoms. Er-doped SiO₂ films containing Er impurities and a high density of nc-Si were fabricated by laser ablation of Er films deposited on Si substrate in an O₂ gas atmosphere, followed by annealing at high temperatures in flowing Ar gas. Hydrogenation at 300–500 °C was found to effectively increase the PL intensity of Er ions as well as that of nc-Si. In particular, the hydrogen atom treatment dramatically shortens the hydrogenation time for the enhancement of Er PL compared to the hydrogen molecule treatment. Spectra of electron spin resonance showed a decrease in residual defects, namely, P_b-type defects located at the interfaces between nc-Si and SiO₂ by hydrogenation. These results clearly show the effectiveness of hydrogen passivation for Si nanostructures; i.e., the increase in the Er PL and nc-Si PL due to hydrogen passivation of the nonradiative recombination centers located at the interfaces between nc-Si and SiO₂. PACS 78.67.Bf; 71.20.Eh; 76.30.Mi; 81.15.Fg     

Mechanism and enhancement of photoluminescence from silicon nanocrystals implanted in SiO2 matrix

Photoluminescence (PL) spectra of Si nanocrystals (NCs) prepared by 130 keV Si ions implantation onto SiO2 matrix were investigated as a function of annealing temperature and implanted ion dose. PL spectra consist of two PL peaks, originated from smaller Si NCs due to quantum confinement effect (QCE) and the interface states located at the surface of larger Si NCs. The evolution of number of dangling bonds (DBs) on Si NCs was also investigated. For hydrogen-passivated samples, a monotonic increase in PL peak intensity with the dose of implanted Si ions up to 3×1017 ions /cm2 is observed. The number of DBs on individual Si NC, the interaction between DBs at the surface of neighbouring Si NCs and their effects on the efficiency of PL are discussed.     

多孔硅量子点中的电子局域态

经过激光辐照和高温退火加工能够生成多孔硅样品,在650—780 nm处检测到很强的光致荧光（PL）峰,并且有明显的钉扎和增强效应.实验表明,这种PL发光的强度与样品受辐照和退火的时间短密切相关.通过第一性原理模拟计算发现,样品表面用SiO 双键和Si—O—Si桥键钝化,能隙中会出现电子局域态.激光辐照和高温退火的时间长短决定了样品表面SiO双键和Si—O—Si桥键的密度,而该密度正是影响多孔硅量子点中电子局域态生成的关键. 关键词： 多孔硅量子点 硅氧钝化键 电子局域态