基于蜷曲空间结构的近零折射率声聚焦透镜

研究基于蜷曲空间结构的近零折射率声聚焦透镜.根据近零折射率材料的声波方向选择机理,采用蜷曲空间结构为基本单元进行排列,设计具有特定入射与出射界面的几何结构,对透射声波的出射方向进行调控,实现了平面声波与柱面声波的聚焦效应,并深入讨论了透镜内部刚性散射体对声聚焦性能的影响.在此基础上,改变近零折射率透镜的出射界面,可以精确调控声波阵面的形状与方向.该类型透镜具有单一的单元结构、高聚焦性能及高鲁棒性等优点.研究结果为设计新型近零折射率声聚焦透镜提供了理论指导与实验参考,同时也为研究声波阵面的调控提供了新思路.     

Characterization of cylindrical ultrasonic transducers using acoustic holography

We present the results of studying the vibrational velocity distribution over the surface of cylindrical ultrasound transducers by acoustic holography. We describe two approaches for acoustic holography: the spatial spectrum method and the Rayleigh integral method. In the case of cylindrical sources the spectral method has a specific feature in comparison to the case of quasi-plane sources: small-scale spectrum components having the form of evanescent (nonpropagating) waves near the source, turn into propagating waves at a certain distance from the source. The use of such a mixed type of waves makes it possible to increase the holographic resolution. To conduct holography of cylindrical sources by the Rayleigh integral method, a modification consisting in the superimposing of boundaries on the integration region is proposed. We present the results of numerical simulation and physical experiments on holography of small cylindrical piezoelectric transducers. We demonstrate that the proposed methods of holography make it possible to recover the vibration structure of source surfaces up to order of the wavelength scales.     

Acoustic field excited by a pulsed laser line source in a cylinder

The excitation and propagation of the acoustic waves in an elastic cylinder are studied by laser ultrasonics both theoretically and experimentally. The theoretical analysis of the two-dimensional acoustic field excited by a pulsed laser line source impacting on the generatrix of an elastic cylinder is presented. The dispersive properties for both cylindrical Rayleigh wave and the higher modes--whispering gallery (WG) modes are analyzed in detail. The numerical transient displacement waveforms for a detecting point located another terminal of the cylinder diameter opposite the source are calculated. The experimental excitation and detection of the acoustic waves in an aluminum cylinder are carried out on a laser ultrasonic system, which mainly consists of a Q-switched Nd:YAG laser and a laser interferometer. The wave components of bulk waves and surface waves (cylindrical Rayleigh waves and WG modes) are analyzed by comparing the numerical and experimental waveforms. The results are in good agreement.     

空间盘绕型声学超材料的亚波长拓扑谷自旋态

声子晶体的Dirac线性色散关系,使其具有奇特的声拓扑特性,在声波控制领域具有良好的应用前景.目前,声子晶体的拓扑边缘态主要基于Bragg散射所产生的能带结构,难以实现低频声波的受拓扑保护单向边缘传输.本文引入空间盘绕结构,设计了具有C_(3v)对称性的空间盘绕型声学超材料,并研究其布里渊区高对称点(K/K'点)的亚波长Dirac锥形线性色散.接着,通过旋转打破空间盘绕型声学超材料的镜像对称性,使其Dirac简并锥裂开而产生亚波长拓扑相变和亚波长拓扑谷自旋态.最后,采用拓扑相位互逆的声学超材料构造拓扑界面,实现声拓扑谷自旋传输.空间盘绕型声学超材料的亚波长Dirac线性色散与亚波长拓扑谷自旋态突破了声子拓扑绝缘体的几何尺寸限制,为声拓扑稳健传输在低频段的应用提供理论基础.     

Axial time-averaged acoustic radiation force on a cylinder in a nonviscous fluid revisited

Objective

The present research examines the acoustic radiation force of axisymmetric waves incident upon a cylinder of circular surface immersed in a nonviscous fluid. The attempt here is to unify the various treatments of radiation force on a cylinder with arbitrary radius and provide a formulation suitable for any axisymmetric incident wave.

Method and results

Analytical equations are derived for the acoustic scattering field and the axial acoustic radiation force. A general formulation for the radiation force function, which is the radiation force per unit energy density per unit cross-sectional surface, is derived. Specialized forms of the radiation force function are provided for several types of incident waves including plane progressive, plane standing, plane quasi-standing, cylindrical progressive diverging, cylindrical progressive converging and cylindrical standing and quasi-standing diverging waves (with an extension to the case of spherical standing and quasi-standing diverging waves incident upon a sphere).

Significance and some potential applications

This study may be helpful essentially due to its inherent value as a canonical problem in physical acoustics. Potential applications include particle manipulation of cylindrical shaped structures in biomedicine, micro-gravity environments, fluid dynamics properties of cylindrical capillary bridges, and the micro-fabrication of new cylindrical crystals to better control light beams.     

Origin of anomalous electronic structures of epitaxial graphene on silicon carbide

On the basis of first-principles calculations, we report that a novel interfacial atomic structure occurs between graphene and the surface of silicon carbide, destroying the Dirac point of graphene and opening a substantial energy gap there. In the calculated atomic structures, a quasiperiodic 6x6 domain pattern emerges out of a larger commensurate 6 sqrt [3] x 6 sqrt [3]R30 degrees periodic interfacial reconstruction, resolving a long standing experimental controversy on the periodicity of the interfacial superstructures. Our theoretical energy spectrum shows a gap and midgap states at the Dirac point of graphene, which are in excellent agreement with the recently observed anomalous angle-resolved photoemission spectra. Beyond solving unexplained issues in epitaxial graphene, our atomistic study may provide a way to engineer the energy gaps of graphene on substrates.     

Broadband cylindrical acoustic cloak for linear surface waves in a fluid

We describe the first practical realization of a cylindrical cloak for linear surface liquid waves. This structured metamaterial bends surface waves radiated by a closely located acoustic source over a finite interval of Hertz frequencies. We demonstrate theoretically its unique mechanism using homogenization theory: the cloak behaves as an effective anisotropic fluid characterized by a diagonal stress tensor in a cylindrical basis. A low azimuthal viscosity is achieved, where the fluid flows most rapidly. Numerical simulations demonstrate that the homogenized cloak behaves like the actual structured cloak. We experimentally analyze the decreased backscattering of a fluid with low viscosity and finite density (methoxynonafluorobutane) from a cylindrical rigid obstacle surrounded by the cloak when it is located a couple of wavelengths away from the acoustic source.     

用阴影法观察水声模型的声场

我们建立了一套用于显示模拟海底反射声场的光学系统。实验水声模型是由水-玻璃粉-玻璃-铝组成的三层模拟海底结构,声源是一个管状换能器,其轴线平行于分界面。实验用这套系统记录了从水下三个界面反射的六组波的声场图像。并且分辨出了它们各自的传播路径。从声场图像也可以得出水-玻璃粉界面、玻璃粉-玻璃界面的面波声速,玻璃粉和玻璃中的体波声速以及它们的厚度,结果与预先测出的参数符合。     

Electronic structure of the Au-intercalated graphene/Ni(111) surface

We report the electronic structure of the Au-intercalated graphene/Ni(111) surface using angle-resolved photoemission spectroscopy and low energy electron diffraction. The graphene/Ni(111) shows no Dirac cone near the Fermi level and a relatively broad C 1s core level spectrum probably due to the broken sublattice symmetry in the graphene on the Ni(111) substrate. When Au atoms are intercalated between them, the characteristic Dirac cone is completely recovered near the Fermi level and the C 1s spectrum becomes sharper with the appearance of a 10?×?10 superstructure. The fully Au-intercalated graphene/Ni(111) surface shows a p-type character with a hole pocket of ～0.034?Å^?1 diameter at the Fermi level. When the surface is doped with Na and K, a clear energy gap of ～0.4?eV is visible irrespective of alkali metal.     

Interaction of surface acoustic waves with moving vortex structures in superconducting films

A method is proposed for describing a moving film vortex structure and its interaction with surface acoustic waves. It is shown that the moving vortex structure can amplify (generate) surface acoustic waves. In contrast to a similar effect in semiconductor films, this effect can appear when the velocity of the vortex structure is much lower than the velocity of the surface acoustic waves. A unidirectional collective mode is shown to exist in the moving vortex structure. This mode gives rise to an acoustic analogue of the diode effect that is resonant in the velocity of the vortex structure. This acoustic effect is manifested as an anomalous attenuation of the surface acoustic waves in the direction of the vortex-structure motion and as the absence of this attenuation for the propagation in the opposite direction.     

锂改性点缺陷石墨烯储氢性能的第一性原理研究

本研究采用基于密度泛函理论的第一性原理方法计算了两种石墨烯点缺陷处原子的分波态密度(PDOS),能带结构和差分电荷密度等,研究了锂掺杂对两种本征石墨烯缺陷C-Bridge和C7557电子结构的改性,以及对其储氢能力的影响.结果表明Li原子能够稳定的掺杂且不易形成团簇,并且Li原子掺杂石墨烯能够对石墨烯能带中的狄拉克锥和费米面起到调控作用,增强了缺陷石墨烯的电子活性.本征缺陷石墨烯的储氢能力较弱,缺陷石墨烯的储氢能力可以通过Li掺杂来改善.     

On the effect of fractional statistics on quantum ion acoustic waves

In this paper, I study the effect of a small deviation from the Fermi–Dirac statistics on the quantum ion acoustic waves. For this purpose, a quantum hydrodynamic model is developed based on the Polychronakos statistics, which allows for a smooth interpolation between the Fermi and Bose limits, passing through the case of classical particles. The model includes the effect of pressure as well as quantum diffraction effects through the Bohm potential. The equation of state for electrons obeying fractional statistics is obtained and the effect of fractional statistics on the kinetic energy and the coupling parameter is analyzed. Through the model, the effect of fractional statistics on the quantum ion acoustic waves is highlighted, exploring both linear and weakly nonlinear regimes. It is found that fractional statistics enhance the amplitude and diminish the width of the quantum ion acoustic waves. Furthermore, it is shown that a small deviation from the Fermi–Dirac statistics can modify the type structures, from bright to dark soliton. All known results of fully degenerate and non-degenerate cases are reproduced in the proper limits.     

Acoustic waves generated by a laser line pulse in a hollow cylinder

A theoretical solution is proposed to predict acoustic waves generated in a homogeneous and isotropic hollow cylinder by a laser line source under either ablation or thermoelastic regime. The Fourier series expansion is introduced for one spatial coordinate to solve this transient response problem. Theoretical displacements are obtained in both regimes for aluminum hollow cylinders with various thickness including a rod of the same size. The corresponding displacements are observed experimentally by the laser ultrasonic technique. Agreement has been found in the time arrival, shape and relative amplitude of surface waves and various longitudinal and transverse bulk waves. These acoustic waves are further identified by the ray trajectory analysis. This work will be helpful when dealing with the inverse problem of the nondestructive evaluation of hollow cylindrical parts.     

On the surface electromagnetic waves in single-layer metal-like materials

Surface electromagnetic waves in single-layer metal-like materials (such as graphene and borophene) in planar and cylindrical geometries are studied. Expressions for the permittivity tensor, dispersion relations, and vibrational spectra are obtained under conditions when the spatial dispersion can be neglected. It is shown that vibrations of two types exist in single-layer materials: bulk-type vibrations with a field localized on the surface and surface-type vibrations in which the field exponentially decrease on both sides beyond the surface.     

Conductance quantization in graphene nanoribbons: adiabatic approximation

A theory of electron states for graphene nanoribbons with a smoothly varying width is developed. It is demonstrated that the standard adiabatic approximation allowing to neglect the mixing of different standing waves is more restrictive for the massless Dirac fermions in graphene than for the conventional electron gas. For the case of zigzag boundary conditions, one can expect a well-pronounced conductance quantization only for highly excited states. This difference is related to the relativistic Zitterbewegung effect in graphene.     

谐振管内非线性驻波的有限体积数值算法

为了扩展谐振管内非线性驻波在工程中的应用, 以及克服现有数值计算方法仅局限于求解直圆柱形和指数形谐振管内非线性驻波的问题. 根据变截面的非稳态可压缩热黏性流体Navier-Stokes方程和空间守恒方程, 并基于求解压力速度耦合方程的半隐式算法和交错网格技术, 构建一种能够计算任意形状轴对称谐振管受活塞驱动时内部非线性驻波的有限体积算法. 分别对圆柱形、指数形和圆锥形谐振管内的非线性驻波进行仿真计算. 通过与现有试验结果以及数值仿真结果的对比, 验证了该方法的正确性.并获得除驻波声压之外的另外一些新的物理结果, 包括速度、密度、温度的瞬时变化.在直圆柱形谐振管内产生冲击声压波, 速度波形中出现钉状结构.而在指数形和圆锥形谐振管内产生高声压幅值的驻波, 没有出现冲击波, 速度波形中均未发现钉状结构. 计算结果表明谐振管内非线性驻波的物理属性与谐振管形状之间有密切关系.     

Acoustics of shells

We discuss the physical phenomena that arise in the scattering of acoustic waves from fluid-immersed elastic (metal) shells which may be either evacuated or filled with the same or with a different fluid. The phenomena occurring here include the formation of circumferential (peripheral, or “surface”) waves that circumnavigate the shells, propagating either as elastic waves in the shell material or as fluid-borne waves of the Scholte-Stoneley type in the external or the internal fluid. By phase matching along a closed circuit, these waves may lead to prominent resonances in the acoustic scattering amplitude, and we demonstrate how the set of observed resonance frequencies is related to the dispersive phase velocities of the surface waves, so that one can be determined from the other. In addition, we discuss how the dispersion curves (phase velocity plotted vs. frequency) of the various types of surface waves show repulsion phenomena due to their coupling through the boundary conditions. The cases of spherical and cylindrical shells are investigated here as typical examples, and as an introductory topic we additionally mention surface waves on plates where related phenomena also occur. Both the theoretical and the experimental aspects of the present subject will be considered, including the experimental visualization of the surface waves.     

Effect of water deposition on the surface dynamics of mesopores in MCM-41

The surface acoustic waves in empty cylindrical pores in the amorphous silica MCM-41 as well as in the same pores partially filled with water are studied with the use of a continuum model. The model is shown to be adequate to predict dispersion relations, cut-off wave vectors and the Airy phases for the secular surface waves of the lowest azimuthal indices n. Quantitative predictions are presented both in the liquid and in the polycrystalline solid phase of water. Two sagittal surface waves exist when water is in the liquid phase. The phase transition to the solid phase (ice) results in the disappearance of the high-frequency mode. All the effects occur in the Terahertz frequency region.     

Axial acoustic radiation force of progressive cylindrical diverging waves on a rigid and a soft cylinder immersed in an ideal compressible fluid

Background and motivation

Previous works investigating the radiation force of diverging spherical progressive waves incident upon spherical particles have demonstrated the direction of reversal of the force when the particle is subjected to a curved wave-front. In this communication, the analysis is extended to the case of diverging cylindrical progressive waves incident upon a rigid or a soft cylinder in a non-viscous fluid with explicit calculations for the radiation force function (which is the radiation force per unit energy density and unit cross-sectional surface) not shown in [F.G. Mitri, Ultrasonics 50 (2010) 620-627].

Method

A closed-form solution presented previously in [F.G. Mitri, Ultrasonics 50 (2010) 620-627] is used to plot the radiation force function with particular emphasis on the difference from the results of incident plane progressive waves versus the size parameter ka (k is the wave number and a is the cylinder’s radius) and the distance of the cylinder from the acoustic source r₀.

Results

Radiation force function calculations for the rigid cylinder unexpectedly reveal that under specific conditions determined by the frequency of the acoustic field, the radius of the cylinder, as well as the distance to the acoustic source, the force becomes attractive (negative force). In addition, the numerical results show that the radiation force on a rigid cylinder does not generally obey the inverse-distance law with respect to the distance from the source.

Conclusion and potential applications

These results suggest that it may be possible, under specific conditions, to pull a cylindrical structure back toward the acoustic source using progressive cylindrical diverging waves. They may also provide a means to predict the radiation force required to manipulate non-destructively a single cylindrical structure. Potential applications include the design of a new generation of acoustic tweezers operating using a single beam of progressive waves (in contrast to the traditional version of acoustical tweezers in which an acoustic standing wave field is produced using two counter-propagating acoustic fields) for investigations in the field of flow cytometry, particle manipulation and entrapment.     

The influence of boundary layer on sound propagation in optical fibers

Physical models of two-layered and three-layered fiber were built. These models were used to calculate acoustic properties of optical fibers. Acoustic properties of fibers with boundary layer and without boundary layer calculated from these model were compared. The propagation of acoustic cylindrical symmetric waves in optical fibers was considered. This problem was treated analytically and numerically in continual approximation. The possibility of simultaneous propagation of two cylindrical symmetric waves in optical fibers with a boundary layer was shown (in a three-layered model). The physical phenomenon of the presence of two waves in the fiber with boundary layer is proposed for study of the boundary layer. Formulas for the calculation of the properties of the boundary layer from the acoustic experiment, verified by numerical calculations, are represented.