用XRD法研究MCM-22分子筛的逐级放大合成

在100,250和1 000 mL高压釜静态成功合成MCM-22分子筛的基础上,在2,5和200 L高压釜中进行了MCM-22分子筛的动态合成试验,对合成的样品用XRD等技术进行了表征。结果表明,在静态和动态条件下合成的样品,全部为纯相MCM-22分子筛,且结晶度较高,从100 mL到200 L的放大试验是成功的。     

MCM-41负载磷钨酸的制备与表征

以十六烷基三甲基溴化铵(CTAB)为表面活性剂,以正硅酸乙酯(TEOS)为硅源,采用水热合成法制备了介孔分子筛MCM-41,并利用浸渍法将磷钨酸(HPW)负载在MCM-41分子筛上,得到HPW/MCM-41催化剂f采用X射线衍射、傅里叶变换红外光谱、透射电镜等手段对负载型催化剂进行了表征.结果表明,磷钨酸负载到MCM-...     

ZnO/MCM-41复合材料的制备及其光谱性质

以硅酸钠(NaSiO3·9H2O)为硅源,三甲基十六烷基溴化铵(CTAB)为模板剂在碱性条件下水热合成介孔分子筛MCM-41,然后以其为主体,采用锌盐浸渍-灼烧的方法.在介孔分子筛MCM-41上负载了氧化锌(ZnO)纳米微粒,并通过扫描电子显微镜,红外光谱(1R).紫外可见吸收光谱(UV-Vis),N2-吸附脱附和荧光光谱等手段对产品进行了系列表征.结果表明,分子筛平均直径约为1.7μm,对不同温度下灼烧后得到的ZnO/MCM-41组装体的光谱性质进行研究表明介孔分子筛MCM-41的尺寸所限,制备出的ZnO粒子粒径小于2 nm.量子尺寸效应使得ZnO/MCM-41组装体中的ZnO纳米粒子的紫外可见吸收光谱及荧光光谱均发生蓝移.通过红外光谱分析得知ZnO负载到MCM-41上并没有改变介孔分子筛原有的骨架结构.     

超声波酸性体系下MCM-41的合成及表征

以十六烷基三甲基溴化铵(CTAB)为模板剂,正硅酸乙酯(TEOS)为硅源,以超声波为辅助手段于酸性介质中制备出了MCM-41介孔分子筛,采用XRD、TEM、FTIR等手段对样品进行了分析表征.结果表明,所合成样品具备MCM-41所特有的六方排列的一维孔道结构和较高的有序度,所合成的MCM-41平均粒径为11nm,孔径约为2.7nm.     

用固体核磁方法研究MCM-22分子筛中的Al状态

用固体NMR技术研究了新型分子筛MCM-22在不同水合状态下的²⁷Al谱和¹H谱.并用新的¹H/²⁷Al双共振方法TRAPDOR对MCM-22分子筛的各种铝状态进行了研究,得到了样品脱水后B酸位(Bronsted)、L酸位(Lewis)以及非骨架Al(OH)的四极耦合常数.     

(纳米MCM-41)-CdS主-客体复合材料的制备及光学性质

以水热法制备了纳米微粒MCM-41分子筛，通过离子交换法将Cd(II)交换到分子筛中，然后采用硫代乙酰胺作硫化氢前驱体对(MCM-41)-Cd进行硫化，制备出主-客体复合材料(MCM-41)-CdS．化学分析表明，客体成功地组装到分子筛中．粉末X射线衍射结果表明，组装过程并未破坏所制备的主-客体材料中分子筛的骨架，分子筛骨架完整且结晶度仍然很高．红外光谱表明所制备材料骨架保持完好．低温N2吸附-解吸附研究表明，相对于MCM-41分子筛主体所制备的复合材料孔体积、孔尺寸及比表面积降低，表明客体在分子筛孔道内组装成功．制备的主-客体复合材料固体扩散漫反射吸收光谱相对于CdS体相呈现某些蓝移，说明客体处于分子筛孔道内，也表明分子筛主体对纳米硫化镉客体表现出明显的立体限域效应．(纳米MCM-41)-CdS及(微米MCM-41)-CdS样品呈现明显发光．     

荧光光谱法研究左氧氟沙星与MCM-41的相互作用

采用微波辅助水热法制备介孔分子筛MCM-41,并用浸渍法将左氧氟沙星(LVFX)组装在MCM-41均一的六方形孔道中,制备出新型载药复合物LVFX/MCM-41。用粉末X射线衍射(XRD)、低温氮吸附、傅里叶变换红外光谱(FTIR)及差热-热重(TGA-DTA)分析对MCM-41以及LVFX/ MCM-41复合物进行表征,合成的介孔分子筛MCM-41的孔径为2.382 nm,比表面积为1 015 m2·g-1。对MCM-41、LVFX/MCM-41、LVFX(固态)及LVFX(溶液)的荧光光谱研究结果显示,LVFX/MCM-41的荧光光谱比组装前发生明显红移,表明MCM-41孔道内表面的羟基和LVFX形成氢键,羟基上的电子云向LVFX分子上的吸电子基团转移;同时MCM-41和LVFX之间形成新环,使电子云能在更大的环上移动,药物分子的共轭体系扩大,荧光光谱峰红移。MCM-41与左氧氟沙星之间强的相互作用为研发以MCM-41为载体的新型释药系统提供了理论依据。     

高铁高砂煤矸石合成4A沸石分子筛

以六盘水矿区的高铁高砂煤矸石为原料合成4A沸石分子筛,将煤矸石低温焙烧、盐酸酸浸除铁、高温焙烧后再碱融活化获得了活性原料,最后采用水热晶化的方法,合成了4A沸石分子筛产品.本研究采用单因素实验的方法,考察了合成条件对4A沸石分子筛性能的影响,并运用XRD和SEM对产品进行了表征,结果表明所得产品为4A沸石分子筛,粒度分...     

多酸-介孔分子筛复合材料的制备、表征及光催化活性

采用浸渍法将具有光催化活性的多金属氧酸盐(polyoxometalate,POM)磷钨酸和硅钨酸负载到介孔分子筛MCM-41,制备了H3PW12O40/MCM-41和H4SiW12O40/MCM-41两种复合材料,以红外光谱(FT-IR)、X射线衍射(XRD)、N2吸附、高分辨透射电镜(HRTEM)等分析手段对所合成的多酸-分子筛复合材料进行了表征,并以农药百草枯的光催化降解考察了复合材料的光催化活性。所合成的复合材料同时保留了母体多酸的Keggin特征结构和载体MCM-41分子筛均匀的六方孔道结构,比表面积超过200m2.g-1。用于农药百草枯的光催化降解实验表明,两种复合材料均具有较高的光催化活性。在365nm紫外光辐照下,以H3PW12O40/MCM-41和H4SiW12O40/MCM-41为催化剂催化反应14h后,百草枯(10mg.L-1)的降解转化率分别达到92.0%和87.6%,反应符合一级化学动力学模型,半衰期分别为3.7和4.6h。     

HPA/MCM-48对水溶性染料的光催化降解

采用浸渍法制备了MCM-48分子筛负载硅钨酸催化剂(HPA/MCM-48),通过红外光谱的方法对试样进行了表征;以紫外灯为光源,研究了HPA/MCM-48对亚甲基蓝、甲基紫、罗丹明B等3种水溶液的光催化脱色性能;讨论了催化剂用量、反应时间等因素对甲基紫降解效果的影响。实验结果表明HPA/MCM-48对染料的最佳催化条件为,10mg/L染料在紫外灯照射下,催化剂用量1.67g/L,光照时间2h;其对甲基紫的降解效果优于对亚甲基蓝和罗丹明B。     

Effect of the thermal and hydrothermal treatment on textural properties of Zr-MCM-41 mesoporous molecular sieve

Zr-containing mesoporous molecular sieves were synthesized by hydrothermal method using cetyltrimethyl ammonium bromide as a template and sodium silicate and zirconium sulfate as raw materials. The structure and morphology of the synthesized samples were characterized via various physicochemical methods, including X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, solid state nuclear magnetic resonance (²⁹Si MAS-NMR) techniques, thermal gravimetric-differential scanning calorimeter (TG-DSC) and N₂ physical adsorption, respectively. The effect of the different initial ZrO₂:SiO₂ molar ratio, the different thermal treatment temperature and the different hydrothermal treatment time on textural property was investigated. The experimental results reveal that the as synthesized samples possess a typical mesoporous structure of MCM-41. On the other hand, the specific surface area and pore volume of the synthesized Zr-MCM-41 mesoporous molecular sieve decrease with the increase of the amount of zirconium incorporated in the starting material, the rise of thermal treatment temperature and the prolonging of hydrothermal treatment time, the mesoporous ordering becomes poor. Also, when the molar ratio of ZrO₂:SiO₂ in the starting material is 0.1, the mesoporous structure of the Zr-MCM-41 mesoporous molecular sieve still retains after calcination at 750 °C for 3 h or hydrothermal treatment at 100 °C for 6 d, and have specific surface areas of 423.9 and 563.9 m²/g, respectively.     

Organic deposits on MCM-41 surface after thermal treatment of as-synthesized samples

FT-IR spectroscopy with photoacoustic detector has been applied to investigate organic template transformations during thermal treatment of silica and silica-alumina MCM-41 molecular sieve. The role of surfactant degradation and type of organic deposits on silica surface remaining after surfactant elimination depends on the presence of alumina in MCM-41 pore network.     

Stability and textural properties of cobalt incorporated MCM-48 mesoporous molecular sieve

Transition metal cobalt incorporated MCM-48 mesoporous molecular sieves (CoMCM-48) with different Co contents were synthesized hydrothermally at 120 °C for 24 h by directly adding fluoride ions to the initial gel. The resulting materials were characterized by means of XRD, TEM, FT-IR, UV-vis, TPR and N₂ physical adsorption, respectively. The effect of various factors, such as the Si/Co molar ratio, calcination temperature and hydrothermal treatment time, on the crystalline structure and textural properties of CoMCM-48 was investigated in detail. The results show that the CoMCM-48 mesoporous materials with high specific surface area were successfully synthesized. A small amount substitution of Co for Si in MCM-48 did not significantly change the textural properties while the higher cobalt incorporated leads to decrease of the surface area and deterioration of structural regularity. Furthermore, the resulting CoMCM-48 still retained the cubic mesoporous framework even after calcination at 800 °C for 4 h or hydrothermal treatment at 100 °C for 24 h.     

Microwave synthesis and textural property of europium substituted mesoporous molecular sieves

Using cetyltrimethyl ammonium bromide (CTAB) as the template and sodium silicate as the silicon source, the MCM-41 mesoporous molecular sieves with Eu incorporated in the framework were synthesized under microwave irradiation condition and the influence of the Si/Eu molar ratio on the crystalline structure, textural properties and the long-range ordering of the resulting sample was investigated by various physicochemical techniques such as X-ray diffraction (XRD), transmission electron microscope (TEM), diffuse reflectance ultraviolet-visible spectroscopy (UV-vis), thermal gravimetric-differential scanning calorimeter (TG-DSC) and N₂ physical adsorption. The results of N₂ adsorption and XRD reveal that the synthesized sample has the ordered hexagonal mesoporous structure. UV-vis spectra provide the strong evidences that most of europium ions were incorporated into the framework of the MCM-41 sample. The crystalline structure, textural properties and mesoporous ordering of the resultant mesoporous materials are related to the amount of europium incorporation. Small amount europium incorporated into the silica-based MCM-41 does not strongly modify the structure of mesoporous molecular sieve. An increase of the Eu content in sample led to reduction of the specific surface area and the deterioration of the long-range ordering.     

Ce-MCM-48立方介孔分子筛结构的光谱表征

在碱性条件下,以混合模板剂pH调节水热合成了掺入铈的介孔分子筛Ce-MCM-48,并采用XRD,DRUV-Vis(紫外-可见漫反射),FTIR,XRF结合BET等测试手段对样品进行表征。实验结果表明,采用本方法所合成的掺铈介孔材料仍保持立方介孔的有序结构,同时适量的铈的掺入和pH调节使分子筛的有序性及吸附性能得到改善,晶胞参数增大,孔径更均一,孔壁增厚。从而可推出Ce-MCM-48的热稳定性、水热稳定性、催化活性及择形选择性可得到提高。掺入的铈以四配位状态高度分散在介孔的有序结构当中。红外光谱表明不同量的铈的掺入对骨架硅的各种振动扰动程度不同。     

Optical properties of (nanometer MCM-41)-(malachite green) composite materials

Nanosized materials loaded with organic dyes are of interest with respect to novel optical applications. The optical properties of malachite green (MG) in MCM-41 are considerably influenced by the limited nanoporous channels of nanometer MCM-41. Nanometer MCM-41 was synthesized by tetraethyl orthosilicate (TEOS) as the source of silica and cetyltrimethylammonium bromide (CTMAB) as the template. The liquid-phase grafting method has been employed for incorporation of the malachite green molecules into the channels of nanometer MCM-41. A comparative study has been carried out on the adsorption of the malachite green into modified MCM-41 and unmodified MCM-41. The modified MCM-41 was synthesized using a silylation reagent, trimethychlorosilane (TMSCl), which functionalized the surface of nanometer MCM-41 for proper host-guest interaction. The prepared (nanometer MCM-41)-MG samples have been studied by powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, low-temperature nitrogen adsorption-desorption technique at 77 K, Raman spectra and luminescence studies. In the prepared (nanometer MCM-41)-MG composite materials, the frameworks of the host molecular sieve were kept intact and the MG located inside the pores of MCM-41. Compared with the MG, it is found that the prepared composite materials perform a considerable luminescence. The excitation and emission spectra of MG in both modified MCM-41 and unmodified MCM-41 were examined to explore the structural effects on the optical properties of MG. The results of luminescence spectra indicated that the MG molecules existed in monomer form within MCM-41. However, the luminescent intensity of MG incorporated in the modified MCM-41 are higher than that of MG encapsulated in unmodified MCM-41, which may be due to the anchored methyl groups on the channels of the nanometer MCM-41 and the strong host-guest interactions. The steric effect from the pore size of the host materials is significant. Raman spectra firmly demonstrated the stable form obtained after the MG incorporation into the nanometer MCM-41. Therefore, nanometer MCM-41 appears to have a good potential for its use as a support for dyes and the (nanometer MCM-41)-MG composite materials may give a wide optical application.     

Effect of reaction parameters on the growth of MWCNTs using mesoporous Sb/MCM-41 by chemical vapour deposition

Mesoporous Si-MCM-41 molecular sieve was synthesized hydrothermally and different wt.% of Sb (1.0, 2.0, 3.0, 5.0, 10.0, 15.0 and 20.0) was loaded on it by wet impregnation method. The Sb/MCM-41 materials were characterized by various physico-chemical techniques such as XRD, TGA and TEM. The TEM image showed a honeycomb structure of the host material. They were used as catalytic templates for the growth of MWCNTs by CVD method with different temperatures at 700, 800, 900 and 1000 °C using acetylene as a carbon precursor. The reaction temperature was optimized for the better formation of MWCNTs and they were purified and then characterized by XRD, SEM, HR-TEM and Raman spectroscopy techniques. The formation of MWCNTs with diameter in the range of 4−6 nm was observed from HR-TEM. The good thermal stability and high productivity of catalyst observed in this study revealed that the 2 wt.% Sb loaded MCM-41 could be a promising support for the catalytic synthesis of MWCNTs at 800 °C by CVD method.     

Highly anisotropic distribution of iron nanoparticles within MCM-41 Mesoporous Silica

Electron microscopy techniques are used to visualize the spatial distribution of iron nanoparticles inside a mesoporous MCM-41 molecular sieve. Direct observation of the iron oxide nanoparticles by STEM-HAADF imaging reveals a highly non-uniform spatial distribution inside the mesopores. These particles are retained in the pores after a reduction treatment unlike the behavior found in other similar systems. It is found that thermal treatments induce changes in its morphology, creating nanowires from particle strings.