Effect of the thermal and hydrothermal treatment on textural properties of Zr-MCM-41 mesoporous molecular sieve

Zr-containing mesoporous molecular sieves were synthesized by hydrothermal method using cetyltrimethyl ammonium bromide as a template and sodium silicate and zirconium sulfate as raw materials. The structure and morphology of the synthesized samples were characterized via various physicochemical methods, including X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, solid state nuclear magnetic resonance (²⁹Si MAS-NMR) techniques, thermal gravimetric-differential scanning calorimeter (TG-DSC) and N₂ physical adsorption, respectively. The effect of the different initial ZrO₂:SiO₂ molar ratio, the different thermal treatment temperature and the different hydrothermal treatment time on textural property was investigated. The experimental results reveal that the as synthesized samples possess a typical mesoporous structure of MCM-41. On the other hand, the specific surface area and pore volume of the synthesized Zr-MCM-41 mesoporous molecular sieve decrease with the increase of the amount of zirconium incorporated in the starting material, the rise of thermal treatment temperature and the prolonging of hydrothermal treatment time, the mesoporous ordering becomes poor. Also, when the molar ratio of ZrO₂:SiO₂ in the starting material is 0.1, the mesoporous structure of the Zr-MCM-41 mesoporous molecular sieve still retains after calcination at 750 °C for 3 h or hydrothermal treatment at 100 °C for 6 d, and have specific surface areas of 423.9 and 563.9 m²/g, respectively.     

Synthesis and characterization of a hexagonal mesoporous silica with enhanced thermal and hydrothermal stabilities

A synthetic route was developed for a novel hexagonal mesoporous silica that has remarkably wide channel diameters and thick walls. The procedure involved the acid-catalyzed hydrolysis of tetraethylorthosilicate in a water/ethanol/isopropoanol solvent mixture while employing 1-hexadecylamine as a templating agent and mesitylene as an auxiliary agent. After removal of the template by either extraction with ethanolic hydrochloric acid or by calcination at 550 °C, the resulting mesoporous materials had surface areas of 1283 and 1211 m²/g. The channel diameters were found to be 47.2-51.1 Å, while the wall thicknesses were 20.9-21.1 Å. X-ray powder diffraction demonstrated that the novel mesoporous silica belonged to the MCM-41 structural family. Notably, they displayed higher thermal and hydrothermal stabilities, and have higher surface areas than conventionally prepared MCM-41 silica. The thickest channel walls (21.1 Å) can withstand calcination to nearly 850 °C with minimal structural damage. The calcined sample was more resistant to hydrothermal treatment in boiling water than was the solvent-extracted product but both materials showed minimal change after 25 h of hydrothermal treatment.     

Removal of naphthalene from petrochemical wastewater streams using carbon nanoporous adsorbent

Ordered mesoporous carbon, OMC, was synthesized using ordered mesoporous silica MCM-48 as hard template, the structural order and textural properties of the synthesized materials were studied by XRD, SEM, and nitrogen adsorption-desorption analysis. Adsorption of naphthalene over various porous adsorbents such as OMC, MCM-48, and commercial activated carbon was studied from solutions with different concentration at ambient temperature (25 ± 2 °C) and pH 7. The adsorption isotherms of naphthalene were in agreement with a Langmuir model, moreover, the uptake capacity of naphthalene followed the order: OMC > commercial activated carbon > mesoporous silica (MCM-48).     

Stability and characterization of mesoporous molecular sieve using natural clay as a raw material obtained by microwave irradiation

Mesoporous molecular sieve was synthesized via microwave irradiation method, and using natural clay, sodium silicate and aluminum chloride as raw materials and cetyl trimethyl ammonium bromide (CTAB) as a template agent under alkaline condition. The samples were characterized by various analytic and spectroscopic tools such as XRD, FT-IR, TEM, TG-DSC and N₂ physical adsorption, respectively. The results show that the synthesized sample has typical mesoporous structure and exhibits good mesoporous ordering. On the other hand, the as synthesized sample after calcination at 550 °C for 10 h has a surface area of 576.0 m²/g and an average pore size of 4.83 nm. Furthermore, the synthesized mesoporous molecular sieve still exhibits good mesoporous ordering after calcination at 750 °C for 3 h or hydrothermal treatment at 100 °C for 10 days.     

Microwave synthesis and textural property of europium substituted mesoporous molecular sieves

Using cetyltrimethyl ammonium bromide (CTAB) as the template and sodium silicate as the silicon source, the MCM-41 mesoporous molecular sieves with Eu incorporated in the framework were synthesized under microwave irradiation condition and the influence of the Si/Eu molar ratio on the crystalline structure, textural properties and the long-range ordering of the resulting sample was investigated by various physicochemical techniques such as X-ray diffraction (XRD), transmission electron microscope (TEM), diffuse reflectance ultraviolet-visible spectroscopy (UV-vis), thermal gravimetric-differential scanning calorimeter (TG-DSC) and N₂ physical adsorption. The results of N₂ adsorption and XRD reveal that the synthesized sample has the ordered hexagonal mesoporous structure. UV-vis spectra provide the strong evidences that most of europium ions were incorporated into the framework of the MCM-41 sample. The crystalline structure, textural properties and mesoporous ordering of the resultant mesoporous materials are related to the amount of europium incorporation. Small amount europium incorporated into the silica-based MCM-41 does not strongly modify the structure of mesoporous molecular sieve. An increase of the Eu content in sample led to reduction of the specific surface area and the deterioration of the long-range ordering.     

Comparative studies of Zr-based MCM-41 and MCM-48 mesoporous molecular sieves: Synthesis and physicochemical properties

Two surfactant-templated synthetic routes are developed for the preparation of new types of mesoporous molecular sieves, Zr-MCM-41 and Zr-MCM-48, using different Si sources but keeping the same zirconium precursor (zirconium-n-propoxide). When fumed silica was used as Si precursor, a Zr-MCM-48 material of cubic structure was formed with a surface area of 654.8 m²/g and an unimodal pore diameter distribution. It shows low stability: after calcination at 600 °C, the ordered structure was transformed into a relatively disordered worm-like mesostructure with many defects and silanol groups. The use of tetraethyl orthosilicate as Si source led to the formation of a Zr-MCM-41 mesoporous solid, which had good thermal stability and a highly ordered hexagonal arrangement, with a surface area 677.9 m²/g and an uniform pore diameter distribution. Fourier transform infrared (FT-IR) characterization and ²⁹Si NMR analysis confirm that zirconium ions indeed incorporated into the framework of the solid. The in situ FT-IR spectroscopy of pyridine adsorption reveals that both, Lewis and Brönsted acid sites, were formed on the surface of these mesoporous materials. The strength and number of the Brönsted acid sites of the Zr-MCM-48 solid were greater than those of the Zr-MCM-41, due to a lower degree of condensation reaction during the synthesis that led to more structural defects in the framework and more silanol groups stretching from the solid surface.     

Ordered mesoporous silica materials (SBA-15) with good heat-resistant magnetism

A series of highly ordered mesoporous materials (CF-SBA-15) with heat-resistant magnetism have been successfully prepared from impregnation of cobalt salt, iron salt, and citric acid with as-synthesized SBA-15. XRD and N₂ isotherms indicate that these materials have highly ordered hexagonal mesoporous symmetry and open pore systems. The measurement of magnetic property shows that these materials are ferromagnetic even if calcined at 550 °C for 10 h in air, indicating their good heat-resistant magnetism. These results would be very important for recycle and regeneration of adsorbents and catalysts in practical applications. Moreover, this method may be useful for other mesoporous materials with thermally stable magnetism from a combination of other mesoporous materials such as MCM-41 with magnetic nanoparticles of MnFe₂O₄ and NiFe₂O₄.     

Quantitative characterization of nanoparticle agglomeration within biological media

The electronics industry is one of the world??s fastest growing manufacturing industries. However, e-waste has become a serious pollution problem. This study reports the recovery of e-waste for preparing valuable MCM-48 and ordered mesoporous carbon for the first time. Specifically, this study adopts an alkali-extracted method to obtain sodium silicate precursors from electronic packaging resin ash. The influence of synthesis variables such as gelation pH, neutral/cationic surfactant ratio, hydrothermal treatment temperature, and calcination temperature on the mesophase of MCM-48 materials is investigated. Experimental results confirm that well-ordered cubic MCM-48 materials were synthesized in strongly acidic and strongly basic media. The resulting mesoporous silica had a high surface area of 1,317?m²/g, mean pore size of about 3.0?nm, and a high purity of 99.87?wt%. Ordered mesoporous carbon with high surface area (1,715?m²/g) and uniform pore size of CMK-1 type was successfully prepared by impregnating MCM-48 template using the resin waste. The carbon structure was sensitive to the sulfuric acid concentration and carbonization temperature. Converting e-waste into MCM-48 materials not only eliminates the disposal problem of e-waste, but also transforms industrial waste into a useful nanomaterial.     

Synthesis and characterization of MCM-41 decorated with CuO particles

CuO particles have decorated on the external surface of MCM-41 by in situ introducing cupric nitrate during the hydrothermal synthesis followed by the calcination. The textural and structural properties of CuO/MCM-41 are compared with those of pure MCM-41. The results show that CuO particles are about 40 nm in size and are not agglomerated. The addition of cupric nitrate to the synthesis gel leads to materials with somewhat reduced quality as evidenced from X-ray diffraction patterns and nitrogen adsorption measurements. CuO/MCM-41 is less ordered relative to pure MCM-41 and there are inter-aggregate pores resulting in a higher average pore diameter in the material. The formation of CuO particles on the external surface of MCM-41 and the possible reason for the less ordered structure of CuO/MCM-41 are also discussed in the present paper.     

Catalytic activity of Fe, Co and Fe-Co-MCM-41 for the growth of carbon nanotubes by chemical vapour deposition method

Iron, cobalt and a mixture of iron and cobalt incorporated mesoporous MCM-41 molecular sieves were synthesised by hydrothermal method and used to investigate the rules governing their nanotube producing activity. The catalysts were characterised by XRD and N₂ sorption studies. The effect of the catalysts has been investigated for the production of carbon nanotubes at an optimised temperature 750 °C with flow rate of N₂ and C₂H₂ is 140 and 60 ml/min, respectively for a reaction time 10 min. Fe-Co-MCM-41 catalyst was selective for carbon nanotubes with low amount of amorphous carbon with increase in single-walled carbon nanotubes (SWNTs) yield at 750 °C. Formation of nanotubes was studied using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy. Transmission electron microscope and Raman spectrum was used to follow the quality and nature of carbon nanotubes formed and the graphitic layers and disordered band, which shows the clear evidence for the formation of SWNTs, respectively. The result propose that the diameter of the nanotubes in the range of 0.78-1.35 nm. Using our optimised conditions for this system, Fe-Co-MCM-41 showed the best results for selective SWNTs with high yield when compared with Fe-MCM-41 and Co-MCM-41.     

Adsorption characterization of surfactant-templated ordered mesoporous silicas synthesized with and without hydrothermal treatment

This work reports a systematic study of ordered mesoporous silicas (OMSs) synthesized with and without hydrothermal treatment at 373 K for a series of surfactants of different alkyl chain length (from C10 to C18). For these samples nitrogen adsorption and small angle X-ray scattering (SAXS) data were measured to characterize their adsorption and surface properties. Namely, nitrogen adsorption isotherms were used to evaluate their specific surface area, pore volume and pore size distribution, whereas SAXS data provided information about their structural ordering. It is shown that while the room temperature synthesis afforded OMS samples with cubic MCM-48 structure, an additional 5-day hydrothermal treatment of these samples at 373 K caused their transformation to MCM-41 (two-dimensional hexagonal structure) and improved their pore uniformity, which was manifested by reducing the width of pore size distribution.     

Post-treatment of mesoporous material with high temperature for synthesis super-microporous materials with enhanced hydrothermal stability

Super-microporous silicon material with high hydrothermal stability denoted as MCM-48-T has been prepared from mesoporous MCM-48 by high temperature treatment. The structural and chemical property of MCM-48-T has been characterized by variety of techniques such as small-angle X-ray diffraction (XRD), transmission electron microscopy (TEM), N₂ adsorption-desorption, infrared spectroscopy (IR) and ²⁹Si MAS NMR, etc. The results showed that Si-OH groups are forced to condense by the treatment of high temperature and the pore size of MCM-48-T is around 1.03 nm in the super-microporous range. Besides, the ratio of Q⁴/Q³ increases considerably. Compared with the original material (MCM-48), the hydrothermal stability of MCM-48-T has significantly enhanced.     

Synthesis, characterization and photodegradation study of mixed-phase titania hollow submicrospheres with rough surface

Titania hollow submicrospheres with mixed phase (anatase-brookite or anatase-rutile) were synthesized via the combination of hydrothermal treatment and calcination of submicrospheres consisting of a polystyrene core and an amorphous TiO₂ shell. After hydrothermal treatment, amorphous titania shell could be transformed to anatase-brookite shell consisting of loose packed titania nanocrystals, which could be further converted to anatase-brookite (below 700 °C) or anatase-rutile titania (700-800 °C) hollow spheres with rough surface via calcination. The loose packing of titania nanocrystals not only inhibited the transformation temperature from anatase to rutile, but also provided titania hollow submicrospheres with high photodegradation activity of Rhodamine B. The photocatalytic activity of titania hollow spheres increased firstly then decreased when the calcination temperature was varied in the range of 450-800 °C, while hollow spheres obtained via calcinating at 700 °C exhibited the highest photocatalytic activity, which was five times higher than that of counterpart without hydrothermal treatment.     

Structure and magnetic properties of nanocrystalline cobalt ferrite powders synthesized using organic acid precursor method

Nanocrystalline octahedra of cobalt ferrite CoFe₂O₄ powders were synthesized using the organic acid precursor route. The effect of the calcination temperature, Fe³⁺/Co²⁺ molar ratio, calcination time and type of organic acid (oxalic, benzoic and tartaric acids) on the formation, crystallite size, microstructure and magnetic properties was studied systematically. The Fe³⁺/Co²⁺ molar ratio was varied from 2 to 1.739 while the annealing temperature was controlled from 400 to 1000 °C for various periods from 0.5 to 2 h. The resulting powders were investigated using X-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). XRD results indicate that a well crystallized, single spinel cobalt ferrite phase was formed for the precursors annealed at 600-800 °C for 2 h, using oxalic and tartaric acids as precursors for Fe³⁺/Co²⁺ molar ratio 1.818. The crystallite size of as-formed powders was in the range of 38.0-92.6 nm at different operating conditions. The calcination temperature and Fe³⁺/Co²⁺ molar ratio have a significant effect on the microstructure of the produced cobalt ferrite. The microstructure of the produced powders was found to be octahedra-shaped. The crystalline, pure cobalt ferrite powders with magnetic properties having a maximum saturation magnetization (76.1 emu/g) was achieved for the single phase at Fe³⁺/Co²⁺ molar ratio 1.818 and annealing temperature of 600 °C for 2 h using tartaric acid precursor.     

Adsorption studies of thermal stability of SBA-16 mesoporous silicas

Cage-like ordered mesoporous silicas, SBA-16, and ethane-silicas with cubic (Im3m) and (Fm3m) symmetry groups were synthesized with addition of sodium chloride by using tetraethyl orthosilicate (TEOS) as silica precursor, 1,2-bis(triethoxysilyl)ethane (BTESE) as bridged silsesquioxane and poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) triblock copolymer Pluronic F127 (EO₁₀₆PO₇₀EO₁₀₆) as template at low acid concentrations. The resulting samples were subjected to extraction in order to remove the polymeric template. The as-synthesized and extracted materials were calcined in the range of 350-900 °C to determine their thermal stability. Based on the XRD analysis and nitrogen adsorption data such as the BET specific surface area, volume of primary mesopores, pore wall thickness and pore size distributions, the SBA-16 silicas exhibit relatively high thermal stability because their mesostructural ordering was retained even up to 900 °C. However, an increase in the calcination temperature tended to decrease significantly the BET surface area, volumes of primary and complementary pores, and to less extent the pore size and pore wall thickness due to the structural shrinkage. Furthermore, the as synthesized samples subjected to a short extraction with acidic ethanol solution possessed even better thermal stability. On the other hand, calcination at 550 °C of ethane-silicas caused a complete removal of the ethane bridging groups from the periodic mesoporous organosilicas and their calcination above 800 °C led to the partial collapse of the structure.     

Synthesis and characterization of Co (Ni or Cu)-MCM-41 mesoporous molecular sieves with different amount of metal obtained by using microwave irradiation method

Co (Ni or Cu)-MCM-41 mesoporous molecular sieves with different amount of metal were synthesized by using cetyltrimethyl ammonium bromide as a template and by a novel microwave irradiation method. These samples were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and N₂ physical adsorption. The experimental results show that Co (Ni or Cu)-MCM-41 mesoporous molecular sieves were successfully synthesized. When the as-synthesized samples were calcined at 550 °C for 10 h, the template was effectively removed. Under microwave irradiation condition, Co-MCM-41 mesoporous molecular sieves have specific surface areas in a range of 745.7-1188.8 m²/g and average pore sizes in a range of 2.46-2.75 nm; Ni-MCM-41 mesoporous molecular sieves have specific surface areas in a range of 625.8-1161.3 m²/g and average pore sizes of ca. 2.7 nm; Cu-MCM-41 mesoporous molecular sieves have specific surface areas in a range of 601.6-1142.9 m²/g and average pore sizes in a range of 2.46-2.76 nm. On the other hand, with increasing the introduced metal amount, the specific surface area and pore volume of the synthesized Co (Ni or Cu)-MCM-41 mesoporous molecular sieves became small, and the mesoporous ordering of the samples became poor. Under the comparable synthesis conditions, the synthesized Co-MCM-41 mesoporous molecular sieve has a bigger specific surface area and a more uniform pore distribution as compared with the synthesized Ni-MCM-41and Cu-MCM-41 mesoporous molecular sieves.     

Synthesis of multi-wall carbon nanotubes by the pyrolysis of ethanol on Fe/MCM-41 mesoporous molecular sieves

Ordered hexagonal arrangement MCM-41 mesoporous molecular sieves were synthesized by the traditional hydrothermal method, and Fe-loaded MCM-41 mesoporous molecular sieves (Fe/MCM-41) were prepared by the wet impregnation method. Their mesoporous structures were testified by X-ray diffraction (XRD) and the N₂ physical adsorption technique. Carbon nanotubes (CNTs) were synthesized by the chemical vapor deposition (CVD) method via the pyrolysis of ethanol at atmospheric pressure using Fe/MCM-41 as a catalytic template. The effect of different reaction temperatures ranging from 600 to 800 ^°C on the formation of CNTs was investigated. The resulting carbon materials were characterized by various physicochemical techniques such as transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and Raman spectroscopy. The results show that multi-wall carbon nanotubes (MWCNTs) with an internal diameter of ca. 7.7 nm and an external diameter of ca. 16.9 nm were successfully obtained by the pyrolysis of ethanol at 800 ^°C utilizing Fe/MCM-41 as a catalytic template.     

Characterization of mesoporous VOx/MCM-41 composite materials obtained via post-synthesis impregnation

Spherical-particle MCM-41 was synthesized at room temperature, and, then, impregnated with aqueous solutions of NH₄VO₃ to produce variously loaded VO_x/MCM-41 composite materials. Bulk and surface properties of the materials thus produced were characterized by means of X-ray powder diffractometry (XRD), infrared spectroscopy (FTIR), N₂ sorptiometry and X-ray photoelectron spectroscopy (XPS). Results obtained indicated that subsequent calcination at 550 °C (for 2 h) of the blank and impregnated MCM-41 particles, results in materials assuming the same bulk structure of MCM-41, and exposing uniformly mesporous, high area surfaces (P_w = 2.0-2.3 nm; 974-829 m²/g), except for the material obtained at 20 wt%-V₂O₅ that was shown to suffer a considerable loss on surface area (down to 503 m²/g). XPS results implied that the immobilization of the VO_x species occurs via interaction with surface OH/H₂O groups of MCM-41, leading to the formation of vanadate (VO₃⁻) surface species, as well as minor V-O-Si and V₂O₅-like species. However, in all cases, the vanadium sites remained pentavalent and exposed on the surface.     

Synthesis of Co submicrospheres self-assembled by Co nanosheets via a complexant-assisted hydrothermal approach

Co submicrospheres with the typical diameter of ca. 500 nm, and possessing beautiful morphologies composed of dense Co nanosheets ca. 10 nm thick, were synthesized by a facile and low-cost complexant-assisted hydrothermal approach. Magnetic measurement at room temperature indicated the coercivity of the submicrospheres reached 268 Oe, which was much higher than that of bulk Co and of some microstructure cobalt materials reported previously. Hexagonal close-packed (hcp) and face-centered cubic (fcc) cobalt phases in the materials were identified by X-ray diffractometer (XRD). It was revealed that the addition of the complexant sodium tartrate played a crucial role in the formation of the hierarchical architectures of the Co submicrospheres. We believe that the high coercivity of the synthesized submicrospheres may result from their special nano-micro structure, and we suggest that this low-cost and facile synthesis approach can be used for large-scale production of Co magnetic materials with special structures and morphologies, as well as excellent magnetic properties.     

镧掺杂的介孔分子筛的合成及其光学性能研究

以十六烷基三甲基溴化铵(CTAB)为表面活性剂,正硅酸乙酯(TEOS)为硅源,采用水热晶化法,合成了镧掺杂的MCM-41介孔分子筛。通过X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱、透射电镜(TEM)、紫外-可见(UV-Vis)光谱等测试手段对其孔结构和镧原子的存在状态进行了表征。XRD和TEM结果表明,合成样品具有典型的二维六方有序介孔结构,样品的傅里叶变换红外光谱和紫外-可见光谱表明镧被成功的引入到介孔骨架中。