Prediction of environmental noise from fast electric trains

A model is presented for the environmental noise of fast electric trains on continuous welded rails, based on a consideration of the possible modes of vibration of the wheels. Evidence is presented to support the idea that the wheels are the dominant sources of noise and radiate as resonant dipoles. The model is calibrated by the results of measurements and methods of predicting train noise level and noise energy (per unit area) are developed. The noise intensity is found to increase as the fourth power of the speed. Energy (per unit area) at an observer increases as the third power of the speed and is proportional to train length divided by the distance of the observer from the track. The relevance of the model as a basis for the calculation of train noise in terms of some noise indices is then discussed and it is shown that it can be used to predict the parameters required by some indices which may be relevant to the subjective effects of environmental train noise.     

The new policy of the European Commission for the abatement of railway noise

With the Green Paper on Future Noise Policy published in November 1996, the European Commission began to step up its activities in the field of European noise abatement policy including the railway sector. The Commission has convened various working groups (WG) on noise reception and emissions in order to develop proposals for the new European noise policy. The Railway Noise WG started its work in December 1999. Furthermore, the Commission is going to enforce noise emission limits for high-speed and conventional train sets operating on the trans-European network within the Interoperability Directives of the European Union.This paper reports on the reasons for the new European noise policy. It describes how railway noise regulations are developed within the framework of the Interoperability Directives. First, limit proposals for high-speed train sets are presented. Results of the activities of the Railway Noise WG are described.     

A comparative study of different numerical models for predicting train noise in high-rise cities

Large-scale outdoor field measurements were carried out on a residential building to assess the noise levels caused by pass-by trains that run on a nearby viaduct. The experimental results were compared with different schemes for predicting noise from trains. The octave band sound power levels of the train passing by, which are required as input parameters for the Nordic prediction method for train noise (NMT), CSTB 92 and ISO 9613-2 provided in the Mithra software, were determined by an inversion method. The method of calculation of railway noise (CRN) from the UK gives the best agreement with the measured results. The NMT prediction scheme also provides a good prediction of the general trend of the experimental data, but it always overestimates the measured noise levels. As far as the quantitative agreement with experimental data is concerned, the CSTB 92 and ISO 9613-2 prediction schemes are comparatively less satisfactory.     

SEA and contribution analysis for interior noise of a high speed train

This paper presents a detailed Statistical Energy Analysis (SEA) and contribution analysis of the interior noise of a high-speed train through extensive simulations and measurements. The SEA model was developed based on the actual geometrical parameters of a benchmark high-speed coach. Sound transmission loss levels of the structural components of the car body, which are required in the SEA model, were tested in a dedicated acoustic laboratory following international standard ISO 140-3:1995. Modal densities of these structural components were derived from measured frequency response functions using the modal counting method. Damping loss factors were obtained using the half-power bandwidth method and the vibration attenuation method. By considering the relationship between sound radiation and power transmission, coupling loss factors between structures and cavities were estimated. Source inputs to the SEA model were derived from field experiment data. Interior noise due to those sources was predicted using the SEA model and the prediction was generally in good agreement with measurement. Contribution analysis was then performed using this validated model through parametric study, and this analysis was further examined experimentally. In conclusion, for the coach that was investigated in this paper, the key factors for interior noise are sidewall vibration, bogie area noise, and floor sound transmission loss. Based on this and other engineering considerations, an interior noise control strategy can be defined.     

Experimental analysis of wheel noise emission as a function of the contact point location

Recent analyses show that the wheel noise emission depends on the lateral position of the contact patch area on the wheel tyre. This displacement from the nominal position is such that different wheel modes are excited, resulting in a different frequency and amplitude composition of the wheel related noise component. In this paper the results of a test programme held on the ETR500 Italian high-speed train are shown. Thanks to a special device mounted under the axle box comprising a microphone and a windshield, it has been possible to measure the wheel noise continuously up to 300 km/h in tangent track and in curves. The behaviour of wheels in different condition of line curvature is shown, together with the results from a new type of constrained layer damped wheel.     

Annoyance reactions due to railway noise

Social survey studies to assess the presence of general annoyance were made in different areas exposed to railway noise. The results show that an increase in the number of passing trains increases annoyance up to a certain level, after which a levelling off takes place. Hence, there is no real annoyance in areas exposed to a maximum of 50 train passages/24 hours until the noise level reaches above 85 dB(A). If, on the other hand, train passages are 60 or more, annoyance increases according to the dB(A) level.     

Commercial road vehicle noise

A survey of the characteristics of the noise emitted by commercial vehicles has been made. The most important single parameter determining the noise of a modern diesel-engined vehicle is the engine speed. All of the other parameters such as load, road speed, etc., have only a secondary effect.The sources of noise on the vehicle are reviewed and it is shown how the characteristics of these sources determine the overall noise characteristics of the vehicle. It has been found that a simple model of the vehicle as a number of coincident point sources predicts the overall noise characteristics of the vehicle to ±2 dB(A). It is shown that there are two extremes of behaviour, the rolling noise controlled vehicle and the power unit noise controlled vehicle; the engine is currently the controlling noise source.Tyre noise has been investigated in some detail as comparatively little has been published previously on this source. Empirical relationships between the tyre noise and speed, tyre size and road surface roughness are given. It is concluded that tyre noise is generated by impacting between elements of the tyre tread and elements of the road surface.Modifications have been made to the engine, exhaust, intake and cooling fan of a 9 ton, 6 litre diesel engined truck which have reduced its ISO test noise level from 88 dB(A) to 80 dB(A). However, it is concluded that 80 dB(A) commercial vehicles are not yet feasible for production. In particular insufficient is known about cooling fan design.Finally cab noise has been investigated and it has been found to originate from the same source as the exterior noise, power unit airborne noise. Therefore any modifications to the power unit to reduce exterior noise will have a similar effect on interior noise. This is confirmed by the vehicle modifications mentioned above which reduced the maximum cab noise from 87 dB(A) to 79 dB(A).     

Amplitude noise suppression in high-repetition-rate pulse train generation from a frequency-modulated Er-Yb laser

A detailed experimental analysis of the amplitude noise in high-repetition-rate picosecond pulse trains generated by spectral filtering of a frequency-modulated Er-Yb:glass laser is reported. Two distinct sources of noise are identified, and stabilization techniques for noise suppression are proposed and experimentally demonstrated. Intensity noise suppression of ∼20 dB, corresponding to less than 2% residual amplitude fluctuations of the pulse train, has been achieved at repetition rates of 2.5 GHz and 5 GHz with pulse durations of ∼50 ps. Received: 28 July 1999 / Revised version: 13 September 1999 / Published online: 20 October 1999     

利用卷积网络的高速列车主观声品质预测*

随着高速列车在中国的高速发展,乘客对舒适性的要求也在提高,因此高速列车内声学舒适性是一个需要研究和解决的问题。首先,本文基于声学人工头设备,获取了高速列车行驶在350 km/h速度下不同车厢不同区域的双耳噪声样本,并对其分别开展了主观声学评价和基于响度、尖锐度、粗糙度和抖动度等参数的客观声品质分析。结果表明,350 km/h速度下高速列车车内噪声能量集中在3000 Hz以内,风挡区域是舒适性评价较差的位置,而响度是影响主观评价最大的因素。其次,利用卷积神经网络算法将主观评价结果与高速列车噪声样本相关联,建立了车内噪声主观声品质预测模型,并与基于BP神经网络的预测模型进行了对比。结果表明,基于卷积神经网络的主观声品质预测模型具有更高的预测精度,可以用于指导高速列车车内声学舒适性的优化设计。     

高速动车组气动噪声试验与仿真分析*

通过风洞试验对某高速动车组整车、受电弓及转向架远场气动噪声特性进行分析。试验结果表明,高速动车组远场气动噪声是一宽频噪声,总声能随速度的6.6次方增加;由受电弓引起的远场气动噪声主要集中在中高频,噪声峰值频率随速度变化线性增加;由转向架引起的远场气动噪声主要集中在中低频,噪声峰值频率与速度无关。在此基础上,通过大涡模拟和声扰动方程获得该高速动车组近场噪声。高速动车组远场噪声测点仿真结果与试验结果的最大差值2.2 dB(A),最大相对误差2.5%,表明仿真模型的准确性。仿真结果表明,车头近场噪声以车头鼻尖为界,底部气动噪声能量大于上部流线型气动噪声能量,其中转向架舱位置噪声能量最大,因此进行车内外降噪方案设计时,应重点关注车头转向架舱位置。     

Characterisation of tram noise emission and contribution of the noise sources

The recent expansion of French tram networks and the related local residential complaints mean that a better knowledge of the situations leading to negative reactions from the local inhabitants is required. Hence a research project has been conducted to evaluate and describe noise and vibration emission of trams as well as the perception by the local residents. This paper investigates tram noise emission on common straight track sections, involving two vehicle scales. First the acoustic power and the mean vertical directivity of the total tramset is assessed using an arc of microphones. Then the localisation and the analysis of the main noise sources are performed by means of a cross array during the tram pass-by. Two tram types representing two generations of French rolling stock, both running on two sites with distinct track characteristics, have been investigated considering the effect of speed, tram type, and track type on the noise source contributions and spectral features. Most sources are located in the lower part of the trams, mainly related to rolling noise, with a strong dependence on speed and track type. The tram type dependency, although globally of second importance, influences greatly the noise spectral distribution and behaviour. The HVAC was the only roof-mounted source which could be detected; its contribution towards building storeys becomes significant in configurations of low rolling noise. A tram noise emission model based on the various noise sources has been developed.     

Dynamic noise modeling at roundabouts

Modeling spatial and temporal noise variations at roundabouts is a tedious task. Indeed, noise levels are strongly influenced by the complex vehicle interactions taking place at the entries. An accurate modeling of the merging process and its impact on vehicle kinematics, waiting time at the yield signs and queue length dynamics is therefore required. Analytical noise prediction models disregard those impacts since they are based on average flow demand patterns and pre-defined kinematic profiles. The only way to capture all traffic dynamics impacts on noise levels is to combine a traffic simulation tool with noise emission laws and a sound propagation model. Yet, such existing dynamic noise prediction packages fail in representing vehicle interactions when the roundabout is congested and are difficult to calibrate due to their numerous parameters. A new traffic simulation tool, specifically developed for roundabouts, is therefore proposed in this paper. It has few easy-to-calibrate parameters and can be readily combined with noise emission and propagation laws. The obtained noise package is able to produce relevant dynamic noise contour maps which can support noise emission assessment of local traffic management policies. Results are validated against empirical data collected on a French suburban roundabout on two different peak periods.     

复杂声学环境中人耳附近空间有源降噪研究综述

复杂声学环境中人耳附近空间降噪是有源噪声控制研究的重要课题,目前采用的主要方法为有源降噪头靠(AHR)和虚拟声屏障(VSB).本文简述AHR与VSB的发展历史和研究现状,介绍其物理原理和设计方法,评述其在实际应用中的优缺点,讨论了目前存在的问题与未来相关的研究方向.已有理论、数值仿真和实验研究验证了相关技术在人耳附近空间产生静区的可行性. AHR系统需要较少控制源,系统相对简单易实现,但静区范围较小,结合虚拟传声器技术和人头跟踪技术后可实现随人头移动的静区,降噪频率可达中高频; VSB产生的静区范围较大,但控制源个数较多,系统复杂和成本高,可通过代价函数和控制源优化,以及主被动混合控制技术来提高有效降噪频率范围和减少控制源个数.     

Interior noise control with an active window system

An active window system to reduce the exterior noise sources, such as traffic noise and construction noise which enter rooms through open windows used for natural ventilation is proposed. The proposed system uses a feedforward control method for active noise control so as not to place the sensors and control sources inside the interior space of the building. For global noise reduction throughout the interior room, the control gains for feedforward control are calculated to minimize the total acoustic power of the new source, which is combined with the noise source corresponding to the open window and control sources on the window frame. The performance of the proposed system for directional exterior noise is confirmed with a scale-model experiment. The experimental results show that the proposed system can achieve a noise reduction of up to 10 dB for the entire room of the scale model regardless of the direction of the incident wave.     

The noise of cooling fans used in heavy automotive vehicles

This paper is concerned with the reduction of noise from automotive cooling systems. A comparison is made between the use of axial flow and centrifugal fans and formulae presented for obtaining the octave sound power for each type of fan. The disadvantages of centrifugal fan installations are highlighted and axial fan design configurations are examined with the object of providing optimized systems. Experimental results are presented for different axial fans and comparisons made of the noise measurements with the ingested flow distortions measured by means of a hot wire anemometer. The results indicate the limits of maximum noise reduction which manufacturers may expect using existing fan designs and also indicates the methods for achieving maximum noise reduction for these configurations.     

非圆化磨耗激励下高速列车转向架区域噪声边频带产生机理及影响

该文通过对车辆噪声和车轮非圆化磨耗开展跟踪测试和分析,发现存在车轮非圆化磨耗的列车在运行过程中,其转向架区域噪声窄带频谱上会出现了以非圆化磨耗激励频率为中心,以过轨枕频率为间隔等间距分布的噪声峰值(即噪声边频带).这使得车轮非圆化磨耗不仅会影响其激励频率处的列车轨道结构的振动和噪声,还会对其他频段的噪声产生重要影响.为...     

Application of MetaRail railway noise measurement methodology: comparison of three track systems

Within the fourth RTD Framework Programme, the European Union has supported a research project dealing with the improvement of railway noise (emission) measurement methodologies. This project was called MetaRail and proposed a number of procedures and methods to decrease systematic measurement errors and to increase reproducibility. In 1999 the Austrian Federal Railways installed 1000 m of test track to explore the long-term behaviour of three different ballast track systems. This test included track stability, rail forces and ballast forces, as well as vibration transmission and noise emission. The noise study was carried out using the experience and methods developed within MetaRail. This includes rail roughness measurements as well as measurements of vertical railhead, sleeper and ballast vibration in parallel with the noise emission measurement with a single microphone at a distance of 7.5 m from the track. Using a test train with block- and disc-braked vehicles helped to control operational conditions and indicated the influence of different wheel roughness.It has been shown that the parallel recording of several vibration signals together with the noise signal makes it possible to evaluate the contributions of car body, sleeper, track and wheel sources to the overall noise emission. It must be stressed that this method is not focused as is a microphone-array. However, this methodology is far easier to apply and thus cheaper. Within this study, noise emission was allocated to the different elements to answer questions such as whether the sleeper eigenfrequency is transmitted into the rail.     

激光器自发辐射噪声对混沌光通信系统的影响

构建了基于外光反馈的混沌光通信系统模型, 通过引入Langevin噪声源, 建立了包含自发辐射噪声特性的主从式速率方程. 利用所得数学模型, 研究了系统中可能存在的两类同步:全混沌同步和普通注入锁模型混沌同步; 分析了两端激光器自发辐射噪声对此二类同步以及系统收发两端混沌信号的影响; 最后,以2.5Gb/s伪随机数字调制下的混沌掩蔽方式为例,介绍了系统的加/解密过程以及噪声对系统解码性能的影响. 关键词： 混沌光通信 外光反馈 光注入 混沌同步 自发辐射噪声     

Ground-borne vibration due to static and dynamic axle loads of InterCity and high-speed trains

In predictions of railway-induced vibrations, a distinction is generally made between the quasi-static and dynamic excitation. The quasi-static excitation is related to the static component of the axle loads. The dynamic excitation is due to dynamic train–track interaction, which is generated by a large number of excitation mechanisms, such as the spatial variation of the support stiffness and the wheel and track unevenness. In the present paper, the quasi-static excitation and the dynamic excitation due to random track unevenness are evaluated by means of numerical predictions. A solution strategy is presented that allows for the evaluation of the second-order statistics of the response due to dynamic excitation based on the power spectral density function of the track unevenness. Due to the motion of the train, the second-order statistics of the response at a fixed point in the free field are non-stationary and an appropriate solution procedure is required. The quasi-static and dynamic contribution to the track and free-field response are analysed for the case of InterCity and high-speed trains running at a subcritical train speed. It is shown how the train speed affects the quasi-static and dynamic contribution. Finally, results of numerical predictions for different train speeds are compared with field measurements that have been performed at a site along the high-speed line L2 Brussels–Köln within the frame of homologation tests.