稀土硼化物LaxCe1-xB6亚微米粉的制备及光吸收研究

以稀土氧化物La₂O₃和CeO₂为稀土源, 以NaBH₄为硼源在真空环境中通过固相反应成功制备出了分散性好的单相三元La_xCe_1-xB₆亚微米粉. 系统研究了掺杂元素La对CeB₆物相, 微观结构及光吸收性能的影响. 实验结果表明, La元素的掺杂没有改变CeB₆的物相和晶体结构, 而是无序替代了Ce原子晶位. 光吸收结果表明, 随着La掺杂量的增加La_xCe_1-xB₆分散液吸收谷波长从620 nm减小到610 nm出现了蓝移现象.     

Structural modulation and physical properties of cobalt-doped layered La_2M_5As_3O_2(M=Cu,Ni) compounds

We investigate the structural variation and physical properties of layered La_2M_5As_3O_2(M=Cu,Ni) compound upon Co doping. It is found that the substitution of Co ion just induces the monotonous change of lattice constants without observing the anomalous kink in superconducting La_2(Cu~(1-x)Nix)_5 As_3O_2 solid-solutions. Meanwhile, this doping barely changes As–As bond length in [M_5As_3]~(2-) subunit(±2%), being significantly smaller than 7% shrinkage of that in La_2(Cu~(1-x)Nix)_5 As_3 O_2. Therefore, the doping dependence of crystal structure exhibits similar trend with Ba~(1-x)K_xFe_2 As_2 without the interference of As1–As 2 bonding, implying that the Co substitution for Cu/Ni is hole-doped. In terms of physical property, La2(Cu1-xCox)~5As_3O_2 turns into itinerant ferromagnetic metal, while La2(Ni1-x Cox)5 As3 O2 shows paramagnetism and suppressed structural phase transition upon Co-doping. The distinct structural variation and absence of superconductivity provide important clues to understand the effect of As–As bond in [M_5 As_3]~(2-) subunit.     

Effect of surface oxygen vacancy defects on the performance of ZnO quantum dots ultraviolet photodetector

The slower response speed is the main problem in the application of ZnO quantum dots (QDs) photodetector, which has been commonly attributed to the presence of excess oxygen vacancy defects and oxygen adsorption/desorption processes. However, the detailed mechanism is still not very clear. Herein, the properties of ZnO QDs and their photodetectors with different amounts of oxygen vacancy (V_O) defects controlled by hydrogen peroxide (H₂O₂) solution treatment have been investigated. After H₂O₂ solution treatment, V_O concentration of ZnO QDs decreased. The H₂O₂ solution-treated device has a higher photocurrent and a lower dark current. Meanwhile, with the increase in V_O concentration of ZnO QDs, the response speed of the device has been improved due to the increase of oxygen adsorption/desorption rate. More interestingly, the response speed of the device became less sensitive to temperature and oxygen concentration with the increase of V_O defects. The findings in this work clarify that the surface V_O defects of ZnO QDs could enhance the photoresponse speed, which is helpful for sensor designing.     

放电等离子烧结原位合成LaxCe1-xB6化合物及性能研究

以LaH₂, CeH₂纳米粉和无定形B粉为原料, 通过放电等离子烧结原位合成法制备了单相、高致密度的La_xCe_1-xB₆稀土六硼化物. 系统研究了该系列化合物的晶体结构、表面织构、力学性能、电输运特性及热发射性能. 结果表明, 该方法制备出的样品致密度均高于96%, 维氏硬度最高值达到2310 kg/mm², 说明具有良好的力学性能. 热发射结果表明, 当阴极温度为1873 K, 外加电压为1 kV时, La_0.6Ce_0.4B₆的最大发射电流密度达到40.7 A/cm², 该值高于单纯LaB₆和CeB₆电流密度值. 因此, La_xCe_1-xB₆多元稀土六硼化物作为热阴极材料将有良好的应用前景. 关键词： 稀土六硼化物 阴极材料 热电子发射     

Evidence for bicarbonate formation on vacuum annealed TiO2(110) resulting from a precursor-mediated interaction between CO2 and H2O

The reaction of CO₂ and H₂O to form bicarbonate (HCO⁻₃) was examined on the nearly perfect and vacuum annealed surfaces of TiO₂(110) with temperature programmed desorption (TPD), static secondary ion mass spectrometry (SSIMS) and high resolution electron energy loss spectrometry (HREELS). The vacuum annealed TiO₂(110) surface possesses oxygen vacancy sites that are manifested in electronic EELS by a loss feature at 0.75 V. These oxygen vacancy sites bind CO₂ only slightly more strongly (TPD peak at 166 K) than do the five-coordinated Ti⁴⁺ sites (TPD peak at 137 K) typical of the nearly perfect TiO₂(110) surface. Vibrational HREELS indicates that CO₂ is linearly bound at the latter sites with a ν_a(OCO) frequency similar to the gas phase value. In contrast, oxygen vacancies dissociate H₂O to bridging OH groups which recombine to liberate H₂O in TPD at 490 K. No evidence for a reaction between CO₂ and H₂O is detected on the nearly perfect surface. In sequentially dosed experiments on the vacuum annealed surface at 110 K, CO₂ adsorption is blocked by the presence of preadsorbed H₂O, adsorbed CO₂ is displaced by postdosed H₂O, and there is little or no evidence for bicarbonate formation in either case. However, when CO₂ and H₂O are simultaneously dosed, a new CO₂ TPD state is observed at 213 K, and the 166 K state associated with CO₂ at the vacancies is absent. SSIMS was used to tentatively assign the 213 K CO₂ TPD state to a bicarbonate species. The 213 K CO₂ TPD state is not formed if the vacancy sites are filled with OH groups prior to simultaneous CO₂+H₂O exposure. Sticking coefficient measurements suggest that CO₂ adsorption at 110 K is precursor-mediated, as is known to be the case for H₂O adsorption on TiO₂(110). A model explaining the circumstances under which the proposed bicarbonate species is formed involves the surface catalyzed conversion of a precursor-bound H₂O–CO₂ van der Waals complex to carbonic acid, which then reacts at unoccupied oxygen vacancies to generate bicarbonate, but falls apart to CO₂ and H₂O in the absence of these sites. This model is consistent with the conditions under which bicarbonate is formed on powdered TiO₂, and is similar to the mechanism by which water catalyzes carbonic acid formation in aqueous solution.     

Dy,Co共掺杂对BiFeO3陶瓷磁特性和磁相变温度Tc的影响

采用快速液相烧结法制备BiFeO₃和Bi_0.95Dy_0.05Fe_1-xCo_xO₃ (x=0, 0.05, 0.1, 0.15)陶瓷样品. 实验结果表明: 所有样品的主衍射峰与纯相BiFeO₃相符合且具有良好的晶体结构, 随着Co³⁺掺杂量的增大, Bi_0.95Dy_0.05Fe_1-xCo_xO₃样品的主 衍射峰由双峰(104)与(110)逐渐重叠为单峰(110), 当掺杂量x>0.05时, 样品呈现正方晶系结构; SEM形貌分析可知: Dy³⁺, Co³⁺共掺杂使BiFeO₃晶粒尺度由原来的3—5 μ减小到约1 μ. 室温下, BiFeO₃样品表现出较弱的铁磁性, 随着Dy³⁺和Co³⁺掺杂, BiFeO₃样品的铁磁性显著提高. 在外加磁场为30 kOe的作用下, Bi_0.95Dy_0.05Fe_1-xCo_xO₃ (x=0.05, 0.1, 0.15)的M_r分别为0.43, 0.489, 0.973 emu/g; M_S分别为0.77, 1.65, 3.08 emu/g. BiFeO₃和Bi_0.95Dy_0.05Fe_1-xCo_xO₃样品磁矩M随着温度T的升高而逐渐减小, Dy掺杂使BiFeO₃样品的T_N由644 K升高到648 K, 而T_C基本没有变化. Dy和Co共掺杂导致BiFeO₃样品磁相变温度T_C由870 K降低到780 K, 其T_C变化主要取决于Fe-O-Fe反铁磁超交换作用的强弱和磁结构的相对稳定性. 关键词： 铁磁电材料 磁滞回线 磁相变温度     

Observation of giant magnetocaloric effect under low magnetic fields in EuTi_(1-x)Co_xO_3

The magnetic properties and magnetocaloric effect(MCE) in EuTi_(1-x)Co_xO_3(x = 0, 0.025, 0.05, 0.075, 0.1) compounds have been investigated. When the Ti~(4+) ions were substituted by Co2+ions, the delicate balance was changed between antiferromagnetic(AFM) and ferromagnetic(FM) phases in the EuTiO_3 compound. In EuTi_(1-x)Co_xO_3 system, a giant reversible MCE and large refrigerant capacity(RC) were observed without hysteresis. The values of -?S_M~(max) were evaluated to be around 10 J·kg~(-1)·K~(-1) for EuTi_(0.95)Co_(0.05)O_3 under a magnetic field change of 10 kOe. The giant reversible MCE and large RC suggests that EuTi_(1-x)Co_xO_3 series could be considered as good candidate materials for low-temperature and low-field magnetic refrigerant.     

Simultaneous doping with La and Y for Ba- and Ce-sites in BaCeO3 and the ionic conduction

Powder X-ray diffraction (XRD) analysis showed that the single phase perovskite-type structure of Ba_1−xLa_xCe_0.90−xY_0.10+xO₃₋ (0 x 0.40, =0.05) could be maintained in a wide region of doping level by simultaneous partial substitution of La³⁺ for Ba²⁺-site and Y³⁺ for Ce⁴⁺-site in BaCeO₃. The conduction properties of these oxides were investigated using various electrochemical methods in the same concentration of oxygen vacancy (=0.05). At high oxygen partial pressure, these oxides exhibited a mixed oxide ionic and p-type electronic conduction while at low oxygen partial pressure their conduction was almost protonic. Among these oxides, BaCe_0.90Y_0.10O₃₋ exhibited the highest conductivities with a value of 1.24×10⁻¹ S/cm in dry oxygen, and 5.65×10⁻² S/cm in wet hydrogen at 1000°C. Both of the proton and oxide ion conductivities under oxygen and under hydrogen atmospheres decreased monotonically with the increasing substitution for Ba²⁺- and Ce⁴⁺-sites. The decreases in ion conductivities appear to relate to the decreased free volume (V_f) of crystal lattice as well as the increased distortion of lattice from ideal cubic perovskite structure.     

甲醛分子在羟基化TiO2-B(100)面吸附的第一性原理研究

利用第一性原理研究TiO₂-B表面上甲醛分子（HCHO）与氧桥位羟基（BH）、钛顶位羟基（TH）共吸附时羟基基团对HCHO分子吸附的影响.结果表明：这两种羟基的存在对HCHO在清洁和羟化表面形成多种化学吸附构型产生不同影响.与HCHO分子共吸附时，氧桥位羟基弱化HCHO的吸附；而钛顶位羟基强化HCHO的吸附，且在不同面积超胞上均能显著强化其吸附.利用电子结构分析不同吸附的内在机制，为理解HCHO分子与TiO₂基材料表面的相互作用提供新的视角.     

Dissociation of liquid water on defective rutile TiO2 (110) surfaces using ab initio molecular dynamics simulations

In order to obtain a comprehensive understanding of both thermodynamics and kinetics of water dissociation on TiO₂, the reactions between liquid water and perfect and defective rutile TiO₂ (110) surfaces were investigated using ab initio molecular dynamics simulations. The results showed that the free-energy barrier (~4.4 kcal/mol) is too high for a spontaneous dissociation of water on the perfect rutile (110) surface at a low temperature. The most stable oxygen vacancy (V_o1) on the rutile (110) surface cannot promote the dissociation of water, while other unstable oxygen vacancies can significantly enhance the water dissociation rate. This is opposite to the general understanding that V_o1 defects are active sites for water dissociation. Furthermore, we reveal that water dissociation is an exothermic reaction, which demonstrates that the dissociated state of the adsorbed water is thermodynamically favorable for both perfect and defective rutile (110) surfaces. The dissociation adsorption of water can also increase the hydrophilicity of TiO₂.     

多铁材料Bi1-xCaxFeO3的介电、铁磁特性和高温磁相变

采用溶胶凝胶法制备Bi_1-xCa_xFeO₃ (x=0, 0.05, 0.1, 0.15, 0.2)陶瓷样品. X衍射图谱表明所有样品的主衍射峰均与纯相BiFeO₃相符合且具有良好的晶体结构. 随着x的增大, Bi_1-xCa_xFeO₃样品的主衍射峰由双峰(104)与(110) 逐渐重叠为单峰(110), 当x ≥0.15时, 样品呈现正方晶系结构; 扫描电镜形貌分析可知, 晶粒由原来的0.5 μm逐渐增大到2 μm. Bi_1-xCa_xFeO₃样品介电常数和介电损耗随着x 的增加先增大而后减小. 当f=1 kHz, Bi_0.9Ca_0.1FeO₃ 的介电常数达到最大值, 是BiFeO₃的7.5倍, 而Bi_0.8Ca_0.2FeO₃的介电常数达到最小值, 仅仅是BiFeO₃的十分之一. Bi_1-xCa_xFeO₃样品所呈现的介电特性是由偶极子取向极化和空间电荷限制电流两种极化机理共同作用的结果. 随着Ca²⁺ 的引入, BiFeO₃ 样品的铁磁性显著提高. X射线光电子能谱图表明Fe²⁺和Fe³⁺ 共存于Bi_1-xCa_xFeO₃ 样品中, Fe²⁺/Fe³⁺比例随着Ca²⁺ 掺杂量的增加而增大, 证明Ca²⁺掺杂增加了Fe²⁺的含量, 增强BiFeO₃的铁磁特性. 从M-T曲线观察到BiFeO₃样品在878 K附近发生铁磁相变, 示差扫描量热法测试再次证明BiFeO₃ 在878 K发生相变. Ca²⁺掺杂使BiFeO₃样品的T_N略有变化而T_M基本不变, 其主要原因是Fe-O-Fe反铁磁超交换作用的强弱和磁结构相对稳定.     

Cu/CeO2(110)界面特性的第一性原理研究

Cu-CeO₂体系因其特殊的催化能力而在固体氧化物燃料电池和水煤气转化反应等多个催化领域有重要应用. 采用基于密度泛函理论的第一性原理方法, 在原子和电子层面上系统地研究了单个Cu原子及Cu小团簇在CeO₂(110)面上的吸附构型, 价键特性和电子结构, 结果表明: 1) 单个Cu原子的最稳定吸附位是两个表面O的桥位; 2) Cu团簇的稳定吸附构型为扭曲的四面体结构; 3) Cu原子及Cu团簇的吸附在CeO₂(110)面的gap区域引入了间隙态, 这些间隙态主要来自于Cu及其近邻的O和表层还原形成的Ce³⁺, 间隙态的出现表明Cu的吸附增强了CeO₂(110)表面的活性; 4) 吸附的单个Cu原子及Cu团簇分别被CeO₂(110)面表层的Ce⁴⁺离子氧化形成了Cu^δ+和Cu₄^δ+, 并伴随着Ce³⁺离子的形成, 这个反应可归结为Cu_x/Ce⁴⁺→Cu_x^δ+/Ce³⁺; 5) Cu团簇的吸附比Cu单原子的吸附引入了更多的Ce³⁺离子, 进而形成了更多的Cu^δ+-Ce³⁺催化活性中心. 结合已报道的Cu/CeO₂(111)界面特性, 更加全面地探明了Cu与CeO₂(111)和(110)两个较稳定低指数表面的协同作用特性, 较为系统地揭示了Cu增强CeO₂催化特性的原因及Cu与CeO₂协同作用的内在机理. 关键词： 2')" href="#">Cu/CeO₂ U')" href="#">DFT+U 吸附 电子结构     

Synthesis and investigation of the complex copper oxides Bi2Sr2R2−xCexCu2O10+δ (R=rare earth)

Bi-2222 phases were prepared by solid state reactions and were studied using X-ray diffraction, chemical and EDS-analysis. Compounds with composition Bi₂Sr₂R_1.33Ce_0.67Cu₂O_10+δ were obtained for R=Pr, Nd, Sm-Er. The phases Bi₂Sr₂Cu₂O_10+δ with similar structure but without Ce were prepared for R = Pr, Sm-Dy. For Bi₂Sr₂Eu_2−xCe_xCu₂O_10+δ the solubility limit was determined and the effect of treatment under different oxygen pressures was investigated. Weak diamagnetic signals (<3%) were detected for some of these samples.     

Synthesis and properties of La1-xSrxNiO3 and La1-xSrxNiO2

Superconductivity has been realized in films of La_1-xSr_xNiO₂. Here we report synthesis and characterization of polycrystalline samples of La_1-xSr_xNiO₃ and La_1-xSr_xNiO₂ (0 ≤ x ≤ 0.2). Magnetization and resistivity measurements reveal that La_1-xSr_xNiO₃ are paramagnetic metal and La_1-xSr_xNiO₂ exhibit an insulating behavior. Superconductivity is not detected in bulk samples of La_1-xSr_xNiO₂. The absence of superconductivity in bulk La_1-xSr_xNiO₂ may be due to the generation of hydroxide during reduction, a small amount of nickel impurity, or incomplete reduction of apical oxygen. The effect of interface in films of La_1-xSr_xNiO₂ may also play a role for superconductivity.     

Oxygen diffusion and surface exchange in La1−xSrxFe0.8Cr0.2O3−δ (x=0.2, 0.4 and 0.6)

Oxygen tracer diffusion (D*) and surface exchange rate constant (k*) have been measured, using isotopic exchange and depth profiling by secondary ion mass spectrometry (SIMS), in La_1−xSr_xFe_0.8Cr_0.2O_3−δ (x=0.2, 0.4 and 0.6). Measurements were made as a function of temperature (700–1000 °C) and oxygen partial pressure (0.21–10⁻²¹ atm) in dry oxygen, water vapour and water vapour/hydrogen/nitrogen mixtures. At high oxygen activity, D* was found to increase with increasing temperature and Sr content. The activation energies for D* in air are 2.13 eV (x=0.2), 1.53 eV (x=0.4) and 1.21 eV (x=0.6). As the oxygen activity decreases, D* increases as expected qualitatively from the increase in oxygen vacancy concentration. Under strongly reducing conditions, the measured values of D* at 1000 °C range from 10⁻⁸ cm² s⁻¹ for x=0.2 to 10⁻⁷ cm² s⁻¹ for x=0.4 and 0.6. The activation energies determined at constant H₂O/H₂ ratio are 1.21 eV (x=0.2), 1.59 eV (x=0.4) and 0.82 eV (x=0.6).

The surface exchange rate constant of oxygen for the H₂O molecule is similar in magnitude to that for the O₂ molecule and both increase with increasing Sr concentration.     

Abnormal variation of magnetic properties with Ce content in(PrNdCe)_2Fe_(14)B sintered magnets prepared by dual alloy method

Resource-saving(PrNdCe)_2Fe_(14)B sintered magnets with nominal composition(PrNd)_(15-x)Ce_xFe_(77)B_8(x=0–10)were prepared using a dual alloy method by mixing(PrNd)_5Ce_(10)Fe_(77)B_8 with(PrNd)_(15)Fe_(77)B_8 powders. For Ce atomic percent of 1% and 2%, coercivity decreases dramatically. With further increase of Ce atomic percent, the coercivity increases, peaks at 6.38 kOe in(PrNd)_(11)Ce_4Fe_(77)B_8, and then declines gradually. The abnormal dependence of coercivity is likely related to the inhomogeneity of rare earth chemical composition in the intergranular phase, where Pr Nd concentration is strongly dependent on the additive amount of(PrNd)_5Ce_(10)Fe_(77)B_8 powders. In addition, for Ce atomic percent of 8%,7%, and 6% the coercivity is higher than that of magnets prepared by the conventional method, which shows the advantage of the dual alloy method in preparing high abundant rare earth magnets.     

Evolution of structure and physical properties in Al-substituted Ba-hexaferrites

The investigations of the crystal and magnetic structures of the Ba Fe12-xAlx O19(x = 0.1–1.2) solid solutions have been performed with powder neutron diffractometry. Magnetic properties of the Ba Fe12-xAlx O19(x = 0.1–1.2) solid solutions have been measured by vibration sample magnetometry at different temperatures under different magnetic fields.The atomic coordinates and lattice parameters have been Rietveld refined. The invar effect is observed in low temperature range(from 4.2 K to 150 K). It is explained by the thermal oscillation anharmonicity of atoms. The increase of microstress with decreasing temperature is found from Rietveld refinement. The Curie temperature and the change of total magnetic moment per formula unit are found for all compositions of the Ba Fe12-xAlx O19(x = 0.1–1.2) solid solutions. The magnetic structure model is proposed. The most likely reasons and the mechanism of magnetic structure formation are discussed.     

W掺杂对β-Ga_2O_3导电性能影响的理论研究

采用密度泛函理论的平面波超软赝势计算方法,对不同W掺杂浓度下β-Ga2O3的导电性能进行研究.计算了β-Ga2(1-x)W2x O3(x=0,0.0625,0.125)的优化参数、总态密度和能带结构.结果表明,W掺入β-Ga2O3使Ga2(1-x)W2x O3材料的体积增大,总能量升高,稳定性降低.当W的掺杂量较小时,其电子迁移率较大,导电性能也很强.当增加W的掺杂量,Ga2(1-x)W2x O3材料的平均电子有效质量就略有增大,能隙变得越窄,这与实验的变化趋势相一致.     

Ba1-xB2-y-zO4SixAlyGaz晶体和频可调谐深紫外飞秒激光器

介绍了一种基于新型非线性晶体Ba_1-xB_2-y-zO₄Si_xAl_yGa_z 的可调谐深紫外飞秒激光光源. 从理论上分析了基频光和倍频光在通过非线性晶体时所造成的空间走离和群速度失配, 为了补偿空间走离以及波长调谐过程中晶体折射造成的光束偏离现象, 将两块相同的倍频晶体成镜像放置来产生二次谐波. 并调节延迟线的长度来补偿基频光和倍频光之间的群速度失配, 从而提高和频转换效率. 然后通过和频方式进行三倍频和四倍频来突破晶体相位匹配条件的限制, 产生了波长低于200 nm的深紫外飞秒激光. 利用钛宝石激光器提供基频光光源, 最终在250–300 nm, 192.5–210 nm 范围内获得了高重频、可调谐超短脉冲紫外和深紫外激光. 并在基频光波长为800 nm时, 得到的二倍频、三倍频和四倍频的功率分别为1.28 W, 194 mW和5.8 mW, 相对于前一级的转换效率依次为46.14%, 15.16%和3%. 采用互相关法测量得到266.7 nm紫外激光的脉冲宽度约为640.4 fs.     

(Fe1-xCox)3BO5纳米棒磁性的研究

本文采用高温有机溶剂法制备了(Fe_1-xCo_x)₃BO₅纳米棒, 通过控制反应物中乙酰丙酮钴的含量合成了不同Co含量的(Fe_1-xCo_x)₃BO₅. 利用高分辨透射电子显微镜(HRTEM)、超导量子干涉磁强计(SQUID)对其形貌和磁性能进行了表征. 高分辨透射电子显微镜结果表明制备出的纳米(Fe_1-xCo_x)₃BO₅为多晶棒状, 且具有多折孪晶结构; 磁性测量的结果表明,(Fe_1-xCo_x)₃BO₅纳米棒在室温下表现出铁磁性, 随着Co含量的增加, 纳米棒的铁磁性逐渐增加, 该纳米棒有望用来研究生物大分子的机械性能.