改进粒子滤波在汽轮机故障诊断中的应用夏飞,郝硕涛

针对汽轮机的振动信号容易受到较为复杂的随机噪声污染,提出了一种改进粒子滤波的振动信号降噪方法。首先建立采集振动信号的数学模型,将其作为粒子滤波的状态方程;然后利用小波分析提取采集振动信号的背景噪声,将其和状态信号一起作为观测信号,得到观测方程,把降噪问题转化成在状态空间模型下的滤波问题。由于采用序贯重要性采样的粒子滤波存在着样本退化问题,在重采样阶段采用了一种权值排序、优胜劣汰的重采样算法,就是对各粒子的归一化权值从小到大的排列顺序,并根据权值方差大小淘汰粒子,从而得到了改进的粒子滤波算法,在一定程度上解决了标准粒子滤波的退化问题。进而运用改进粒子滤波算法对振动信号进行降噪处理,降噪前信号和降噪后信号分别通过小波包分解系数求取频带能量,根据各个频带能量的变化提取故障特征向量浓缩了汽轮机振动故障的全部信息,对提取的故障特征向量应用诊断识别算法进行故障模式识别。通过对比降噪前信号和降噪后信号的故障诊断识别率,证明了改进粒子滤波在汽轮机故障诊断中的应用效果更佳。     

基于小波包分解和EMD-SVM的轴承故障诊断方法

针对轴承振动信号具有的非平稳和故障诊断样本数据难以按需获取的问题,设计了一种基于小波包分解和EMD-SVM的故障诊断方法。首先,采用Mallat塔式算法对信号进行降噪,实现信号的小波分解,获得重构后的故障诊断子频带信号。然后,在经典的EMD算法的基础上定义了改进的EMD算法,采用改进的EMD算法对经过小波包降噪的故障诊断子频带信号进行特征提取,从而获得故障诊断特征向量。最后,采用适合小样本分类的SVM进行故障诊断,将经过小波包降噪和EMD特征提取的样本数据用于训练SVM,得到用于故障诊断的多个二分类SVM故障诊断模型,通过投票机制来确定样本数据最终对应的故障诊断类别。在Matlab环境下对轴承故障诊断进行实验,实验结果证明了文中基于小波包和EMD-SVM的方法一种适用于小样本的故障诊断方法,且与其它方法相比,具有诊断效率高和精度高的优点。     

基于正则粒子重采样算法的红外成像消噪处理

 针对红外成像消噪的粒子滤波退化问题,提出正则粒子重采样算法。该算法从粒子群重采样获得粒子云(xjk,nj)mj=1,解决了粒子多样性消失的问题并克服粒子匮乏的现象;接着又通过添加辅助粒子v,将下一时刻观测值权值大的粒子进行标识,使粒子权值ωik∝p(xk｜yik-1)p(xk｜μik-1)更加稳定;给出了运动物体的红外成像消噪模型。实验仿真表明：正则粒子重采样算法通过添加辅助粒子使红外成像消噪效果好,成像清晰度在95%以上。     

提升小波包和改进BP神经网络相融合的新故障诊断算法

针对传统的小波变换和BP神经网络应用于故障诊断中存在自适应性差、效率低等问题,提出一种提升小波包和改进BP神经网络相融合的新故障诊断算法;利用插值细分思想,设计了提升小波包的预测算子和更新算子,结合传统小波包算法和提升模式的原理,完成了提升小波包算法的设计,并将该算法应用于故障信号的消噪和能量特征量的提取;利用遗传算法优化标准BP神经网络的初始权值和阈值,采用L-M算法优化标准BP神经网络的搜索方式;以美国凯斯西储大学提供的滚动轴承实验数据,将新算法应用于实验中,分析结果表明:新故障诊断算法比传统的BP神经网络算法具有收敛速度快、诊断精度高等实效性。     

基于优化辅助粒子算法的红外目标跟踪研究

针对粒子算法存在的问题,提出了辅助粒子算法.该算法在重采样算法基础上,引进辅助变量,对粒子的权2次计算,可使粒子权值比重采样的粒子权值变化更稳定,最后给出了红外目标模型和均方根误差函数.仿真结果表明该算法对运动目标跟踪的均值和方差上均优于标准粒子滤波、重采样粒子滤波,且提高了计算效率.     

基于辅助粒子滤波算法的红外目标跟踪

针对红外目标在跟踪中计算复杂的问题,构建辅助粒子滤波算法。利用贝叶斯重要性采样算法,在权值大的粒子基础上引入辅助粒子变量,然后重新定义重要采样分布函数,防止重采样后粒子概率密度变化。两次加权计算,使粒子权值比仅用重采样的粒子权值变化更稳定,采样点最接近真实状态;同时不同权值粒子的概率阈值可作为粒子滤波是否完成的判断准则。在二维平面构造红外运动目标模型中,系统为零均值高斯白噪声。仿真数据表明:该算法在x,y方向的均方误差、画面处理时间、RM SE性能上优于粒子滤波算法和重采样粒子滤波算法。     

小波包和GA-SVM在轴承故障诊断中的应用

为了解决傅里叶变换难以兼顾信号在时域和频域中的全貌和局部化特征以及支持向量机惩罚参数 和核函数参数 选取的问题,提出了基于小波包和GA-SVM的轴承故障诊断方法。首先通过实验采集多种工况下故障轴承和正常轴承的振动信号,从振动信号中提取能够表征轴承运行状态的时频域特征以及基于小波包分析的特征向量来作为GA-SVM的输入,然后在SVM的基础上,针对SVM的惩罚参数和核函数参数在不同应用场景下的取值难以确定的特性,采用了遗传算法对支持向量机进行参数优化的GA-SVM算法进行模式识别。实验结果显示,基于小波包和GA-SVM的轴承故障诊断方法比SVM和BP都具有更高的识别精度。     

基于Treelet变换的模拟电路故障诊断

针对模拟电路故障诊断中特征向量冗余的问题,提出一种基于Treelet变换的模拟电路故障诊断方法.Treelet变换是一种自适应的多尺度的数据分析方法,适用于对高维数据降维和特征选择。文中首先对被测电路的输出信号采样,将采集到的信号进行Treelet变换,提取故障特征向量,最后将得到的特征向量输入BP神经网络进行故障模式识别。仿真实验结果表明,该方法能够有效地提取电路故障特征。与其他故障特征提取方法相比较,基于Treelet变换的模拟电路故障诊断方法具有较高的故障诊断率和收敛速度。     

小波尺度相关滤波及其改进算法在电火花声源信号处理中的应用

分析提取宽带电火花声源信号,受到船舶辐射噪声的严重干扰,在5 kHz以下的能量集中区信噪比低,且二者Lipschitz指数特性相近,传统基于相邻尺度相关的滤波算法抗干扰能力有限。根据宽带电火花声源信号不同频带所受干扰的不同,信噪比较高的小尺度高频小波系数,采用相邻尺度相关的滤波算法;信噪比较低的大尺度中低频小波系数,采用跨尺度相关的滤波算法,并对算法中阈值系数的选取方法进行修正。结果表明,该算法滤波效果良好,有效的提取了电火花声源信号,适合窄带强干扰背景噪声下的宽带水声信号处理。      

基于改进粒子群算法的提取齿轮磨损特征方法

针对轻微齿轮磨损故障信号在啮合频率和边频带上的幅值特征难以将其与正常信号区分的问题,提出用Laplace小波提取信号的粘滞阻尼比作为一种冲击特征,同时提取对冲击信号敏感的时域和频域峭度指标作为另外两种特征;又由于传统Laplace小波匹配方法存在计算耗时和精度不高的缺点,采用一种基于概率模型的改进粒子群算法以快速找到最佳匹配结果,从而得到其阻尼参数;将上述3种冲击特征用于农用拖拉机变速箱的齿轮磨损故障识别,其结果表明提出的方法在错分率上比基于啮合频率和边频带幅值特征的方法降低了12%。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.