基于LP21模式的光纤弯曲传感器

设计并研制了一种基于LP21模式的新型光纤弯曲传感器。该传感器通过检测敷设于弹性基片上的光纤所传输的LP21模式光斑图像的旋转,实现对弯曲值的高精度测量。运用光纤耦合模理论和弹光效应求解LP21的模方程,证明该模式具有弯曲无关和扭转线性的特性,并检验了光纤弯曲传感器对不同结构参数和环境温度下的性能。实验结果与理论分析相吻合,证实该传感器具有较大的线性动态范围,温度稳定性高,且能辨识弯曲方向。     

单模光纤波导模的傍轴传输特性

将LP01模表示成用拉盖尔-高斯模线性叠加的形式,利用柯林斯公式推导出单模光纤波导模通过傍轴ABCD光学系统的解析传输公式。用所得的解析公式对LP01模在自由空间的传输和聚焦特性作了研究,并和高斯基模进行了比较。数值计算结果表明,用高斯基模描述LP01模会产生一定误差。LP01模经过透镜聚焦后存在焦移,且焦移随着菲涅尔数传输特性的减小而增大。选择合适的菲涅尔数聚焦后,LP01模会出现长焦深,这是与聚焦的高斯模所不同的。     

Fiber acousto-optic mode coupling between the higher-order modes with adjacent azimuthal numbers

It is pointed out theoretically that fiber acousto-optic mode coupling can occur between the higher-order modes with adjacent azimuthal numbers. Selective fiber mode conversion from LP01 to LP11, and then to LP21 or LP02 is demonstrated experimentally in a few-mode fiber by using a method of cascaded acousto-optic mode coupling.     

应用耦合模理论研究光在圆对称双包层光纤中的传输(英文)

为了深入理解双包层光纤的光场传输特性,应用耦合模理论将双包层光纤等效为相互耦合的单模光纤和环形芯光纤,研究了圆对称的双包层光纤的光场传输.通过计算单模光纤LP01模和环形芯光纤导模的耦合系数发现了环形芯光纤LP0n模的耦合系数远大于其它导模的耦合系数,且LP0n模中的高阶模比低阶模的耦合系数大.据此,应用耦合模理论计算得到了该双包层光纤的光传输特性,计算结果发现光场沿光纤轴向呈近似周期分布,且纤芯中光功率变化的平均周期随波长递增,但平均归一化功率与光纤参数紧的选择有关.     

应用耦合模理论研究光在圆对称双包层光纤中的传输

为了深入理解双包层光纤的光场传输特性,应用耦合模理论将双包层光纤等效为相互耦合的单模光纤和环形芯光纤,研究了圆对称的双包层光纤的光场传输.通过计算单模光纤LP01模和环形芯光纤导模的耦合系数发现了环形芯光纤LP0n模的耦合系数远大于其它导模的耦合系数,且LP0n模中的高阶模比低阶模的耦合系数大.据此,应用耦合模理论计算得到了该双包层光纤的光传输特性,计算结果发现光场沿光纤轴向呈近似周期分布,且纤芯中光功率变化的平均周期随波长递增,但平均归一化功率与光纤参数紧的选择有关.     

Intermodal interference of LP01 and LP11 modes inpanda fibers

LP01 and LP11 mode interferences in high-birefringence （Hi-Bi） panda fibers are theoretically and experimentally presented. The propagation characteristics of both the fundamental and second-order modes in Hi-Bi panda fibers are investigated, and the interference output intensity distribution of the LP₀1 and LP₁1 modes in panda fibers are thoroughly examined. An experiment is conducted to verify the feasibility of modal interference sensors. The results show that the two-lobe interference pattern of panda fibers generates energy exchanges when external strain is applied on the fiber. Moreover, Hi-Bi panda fibers can be used to design voltage sensors.     

新型抗弯曲大模场面积光子晶体光纤

研制出一种新型抗弯曲大模场面积石英光子晶体光纤. 利用光子晶体光纤结构设计的灵活性, 通过规划缺陷的位置及空气孔的尺寸, 实现了大模场面积单模及低弯曲损耗特性.应用建立的实际光子晶体光纤特性分析模型, 研究了研制光纤的模式特性和弯曲特性, 在波长1064 nm处, 平直状态下光纤的模场面积可以达到2812 μm², 基模限制损耗为0.00024 dB/m, 高阶模限制损耗高于1.248 dB/m. 基模和高阶模之间的高传输损耗差, 保证了在获得大模场面积的同时实现单模传输. 弯曲半径和弯曲方向角所带来弯曲损耗变化的研究结果显示, 即使在弯曲半径小到5 cm时, 弯曲损耗也在10^-3 dB/m量级以下, 而且在弯曲半径为30 cm时光纤可承受的弯曲方向角范围扩展至-60°–60°. 研制的光纤具有良好的低弯曲损耗特性, 可有效解决非对称结构所带来的光纤弯曲特性对弯曲方向角敏感的问题. 该光纤在高功率光纤激光器、放大器及高功率传输等技术领域具有重要的应用价值. 关键词： 光子晶体光纤 大模场面积 低弯曲损耗 弯曲方向角     

Wavelength-independent all-fiber mode converters

We have used two different photonic crystal fiber (PCF) techniques to make all-fiber mode converters. An LP(01) to LP(11) mode converter was made by the ferrule technique on a drawing tower, and an LP(01) to LP(02) mode converter was made by controlled hole inflation of an existing PCF on a tapering rig. Both devices rely on adiabatic propagation rather than resonant coupling; so high extinction was achieved across a wide wavelength range.     

Ultrashort-pulse investigation of the propagation properties of the LP(11) mode in 1.55-mum communication fibers

The coupling of an ultrashort laser pulse into a single-mode optical communication fiber gives rise to two propagating pulses as a result of the excitation of two guided modes, the fundamental, LP(01) , and the leaky, LP(11) . Such a phenomenon provides a new approach to the study of the propagation properties of the LP(11) mode. An experiment with tunable 110-fs pulses at a wavelength near 1550 nm is described. Information about the group velocity, the polarization-rotation length, the attenuation coefficient, and the cutoff wavelength of the LP(11) mode is obtained in a simple and direct way for various fibers.     

Propagation of femtosecond pulses in large-mode-area, higher-order-mode fiber

We demonstrate propagation of 14 nJ femtosecond pulses through a large-mode-area, higher-order-mode (HOM) fiber with an effective area of 2100 microm2. The pulses propagate stably in the LP07 mode of the fiber through lengths as long as 12 m. The strongly chirped pulses exiting the amplifier fiber are dechirped by the high-order-mode fiber, resulting in pulses with a peak power of 61 kW after propagation in 5 m of the positive-dispersion fiber. A small amount of self-phase modulation is observed in the compressed pulses and is described well by a nonlinear Schr?dinger equation model that takes into account the measured effective area and dispersion of the HOM fiber.     

左手材料光纤的标量解近似

从Maxwell方程组出发,讨论纤芯为左手材料,包层为右手材料的阶跃型光纤.在弱导的情况下,假定横向场的极化方向保持不变,推导了横向电场满足的Helmholtz方程,利用边界条件,经过数学计算,建立了左手材料光纤标量解的特征方程,画出了左手材料光纤LP01模和LP11模的色散曲线.比较左、右手材料光纤的特征方程及其相关曲线,得到了左手材料光纤的某些奇异特性.     

Fiber-based Bessel beams with controllable diffraction-resistant distance

We experimentally generate n=0 Bessel beams via higher-order cladding mode excitation with a long period fiber grating. Our method allows >99% conversion efficiency, wide or narrow conversion bandwidth, and accurate control of the number of rings in the beam. This latter property is equivalent to tuning the beam cone angle and allows for control of width and propagation distance of the center spot. We generate Bessel-like beams from LP(0,5) to LP(0,15) cladding modes and measure their propagation-invariant characteristics as a function of mode order, which match numerical simulations and a simple geometric model. This yields a versatile tool for tuning depth of focus out of fiber tips, with potential uses in endoscopic microscopy.     

Fiber laser with combined feedback of core and cladding modes assisted by an intracavity long-period grating

We present a fiber laser made in a single piece of conventional doped-core fiber that operates by combined feedback of the fundamental core mode LP((0,1)) and the high-order cladding mode LP((0,10)). The laser is an all-fiber structure that uses two fiber Bragg gratings and a long-period grating to select the modes circulating in the cavity; the laser emits at the coupling wavelength between the core mode LP((0,1)) and the counterpropagating cladding mode LP((0,10)) in the Bragg gratings. This work demonstrates the feasibility of high-order mode fiber lasers assisted by long-period gratings.     

折射率不敏感的级联型单模-少模-单模光纤温度传感器

提出了一种折射率不敏感的级联型单模-少模-单模光纤温度传感器。在制作传感器的过程中,设置熔接电流为100 mA,通过将少模光纤与单模光纤进行无错位熔接,以激发稳定的传输模式,形成光纤马赫-曾德尔干涉仪。由于外界环境的改变会引起少模光纤中不同模式之间相位差的改变,从而导致干涉条纹的漂移,因此通过检测干涉条纹的漂移量就可以实现待测参数的检测。少模光纤可以传输LP₀₁,LP₁₁,LP₂₁,LP₀₂共四种模式的光。实验中对长度为81.5 mm的传感器光谱进行分析可知,发生干涉的两个模式主要是LP₀₁模和LP₁₁模。利用该长度的级联型单模-少模-单模光纤传感器进行折射率和温度传感实验,结果表明,随着传感器温度不断的增加,其传输光谱出现了明显的蓝移现象,在27.6~93.8 ℃的温度变化范围内,灵敏度高达-85.9 pm·℃-1,且具有较好的线性度;在甘油折射率为1.347 1~1.443 9变化范围内,其传输光谱没有出现明显的漂移现象,灵敏度仅为3.697 34 nm·RIU-1,具有折射率不敏感特性。因此,相对于传统的包层模干涉型与多模干涉型光纤传感器,所提出的基于FMF的传感器更易于实现对传输模式的控制与分析,且具有结构简单、易于制备、灵敏度高等优点,能够避免温度与折射率同测的交叉敏感问题,可用于电力系统、生物医学、航空航天等领域的温度检测。     

Fiber-optic vector vibroscope

A directional vibration sensor based on polarization-controlled cladding-to-core recoupling is demonstrated. A compact structure in which a short section of multi-mode fiber (MMF) stub containing a weakly tilted fiber Bragg grating (TFBG) is spliced to another single-mode fiber without any lateral offset. Multiple core modes of the MMF are coupled at the junction and appear as well defined resonances in reflection from the TFBG. Some of those resonances exhibit a strong polarization and bending dependence. Both the orientation and the amplitude of the vibrations can be determined unambiguously via dual-path power detection of the orthogonal-polarimetric lowest order LP(1n) modes. Meanwhile, the unwanted power fluctuations and temperature perturbations can be referenced out by monitoring the fundamental LP(01) mode resonance.     

单模光纤端面衍射光束参量与其结构参数关系研究

本文采用指数函数拟合光纤基模端面衍射场光束参量与光纤基本参数的关系，分别得到了各个光束参量与光纤归一化频率V和光纤芯层半径a关系的解析表达式。把曲线拟合得到的基于V和a表达的解析函数的计算结果，与基于光纤芯层参量U、包层衰减参量W和光纤芯层半径a表达的解析函数的计算结果相比，当1.5 相似文献   

少模光纤的弯曲损耗研究

随着光纤通信容量的不断增加, 基于少模光纤的模分复用技术由于其多信道复用、 高频谱效率及低非线性效应成为目前提高光纤通信容量的研究热点. 本文推导得到了适用于少模光纤中高阶模式弯曲损耗的计算公式, 系统研究了下陷层辅助弯曲不敏感抛物线型少模光纤的主要参数(包括芯层半径、芯层到下陷层距离、下陷层宽度及下陷层折射率差)对其弯曲损耗特性的影响. 研究表明: 对于少模光纤, 模式阶数越高, 光纤的弯曲敏感性越高; 随纤芯与下陷层间距离的变化, 光纤各阶模式的弯曲损耗均存在一个最小值. 本文结论对弯曲不敏感少模光纤的设计、制造及少模光纤弯曲性能优化具有指导意义.     

Diffractive beam parameters of LP01 mode of fiber

The diffractive beam parameters of LP01 mode of fiber are analyzed in detail. Based on solving linear equations, two formulas for two kinds of mode-field radii as functions of normalized frequency are presented, and relations between angular radius of far-field divergence, beam propagation factor, and normalized frequency are given. Numerical calculation indicates that the maximal relative error is smaller than 1% within a reasonable parameter range.     

Phase-matched third-harmonic generation in highly germanium-doped fiber

Phase-matched third-harmonic generation is demonstrated in a germanium-doped optical fiber. Green light at 514.4 nm is generated in an LP(03) mode when a pump field at ~1543.3 nm is launched into the fiber in the fundamental LP(01) mode. The phase matching is achieved for a particular combination of the germanium doping concentration and the fiber core diameter.     

小半径弯曲条件下传能光纤传输效率研究

利用光线理论分析弯曲光纤模型中的包层光线传输特性,结合半导体激光模块传能尾纤弯曲实验表明,由于光纤弯曲有效数值孔径减小而进入包层的光线并未完全被耗散,当光纤弯曲部分长度较短时,部分未耗散掉的包层光在进入直光纤部分后仍可重新回到纤芯中进而长距离传输作为有用光输出。该结论表明弯曲光纤的传输效率由弯曲半径和弯曲光纤长度共同决定,即在光纤弯曲半径远小于传统理论临界半径的情况下,合理控制传能光纤弯曲部分的长度,仍可获得较高的传输效率。