Optical properties of rubrene thin film prepared by thermal evaporation

Rubrene thin films are deposited on quartz substrates and silver nanoparticles(Ag NPs) films by the thermal evaporation technique. The optical properties of rubrene thin film are investigated in a spectral range of 190 nm–1600 nm. The analysis of the absorption coefficient(α) reveals direct allowed transition with a corresponding energy of 2.24 e V. The photoluminescence(PL) peak of the rubrene thin film is observed to be at 563 nm(2.21 e V). With the use of Ag NPs which are fabricated by radio-frequency(RF) magnetron sputtering on the quartz, the PL intensity is 8.5 times that of as-deposited rubrene thin film. It is attributed to the fact that the surface plasmon enhances the photoluminescence.     

Fabrication and optical properties of InGaN/GaN multiple quantum well light emitting diodes with amorphous BaTiO3 ferroelectric film

BaTiO3 （BTO） ferroelectric thin films are prepared by the sol,el method. The fabrication and the optical properties of an InGaN/GaN multiple quantum well light emitting diode （LED） with amorphous BTO ferroelectric thin film are studied. The photolumineseence （PL） of the BTO ferroelectric film is attributed to the structure. The ferroeleetric film which annealed at 673 K for 8 h has the better PL property. The peak width is about 30 nm from 580 nm to 610 nm, towards the yellow region. The mixed electroluminescence （EL） spectrum of InGaN/GaN multiple quantum well LED with 150-nm thick amorphous BTO ferroelectric thin film displays the blue-white light. The Commission Internationale De L＇Eclairage （CIE） coordinate of EL is （0.2139, 0.1627）. EL wavelength and intensity depends on the composition, microstructure and thickness of the ferroelectric thin film. The transmittance of amorphous BTO thin film is about 93% at a wavelength of 450 nm-470 nm. This means the amorphous ferroelectrie thin films can output more blue-ray and emission lights. In addition, the amorphous ferroelectric thin films can be directly fabricated without a binder and used at higher temperatures （200 ℃-400 ℃）. It is very favourable to simplify the preparation process and reduce the heat dissipation requirements of an LED. This provides a new way to study LEDs.     

Influence of Fe cap layer on the structural and magnetic properties of Fe49Pt51/Fe bi-layers

The influences of an Fe cap layer on the structural and magnetic properties of FePt/Fe bi-layers are investigated. Compared with single FePt alloy films, a thin Fe layer can affect the crystalline orientation and improve the chemical ordering of L10 FePt films. Moreover, the coercivity increases when a thin Fe layer covers the FePt layer.Beyond a critical thickness, however, the Fe cover layer quickens the magnetization reversal of Fe49Pt51/Fe bi-layers by their exchange coupling.     

Magnetic properties of a Pt/Co2FeAl/MgO structure with perpendicular magnetic anisotropy

Microstructures and magnetic properties of Ta/Pt/Co 2 FeAl（CFA）/MgO multilayers are studied to understand perpendicular magnetic anisotropy（PMA） of half-metallic full-Heusler alloy films.PMA is realized in a 2.5-nm CFA film with B2-ordered structure observed by a high resolution transmission electron microscope.It is demonstrated that a high quality interface between the ferromagnetic layer and oxide layer is not essential for PMA.The conversions between in-plane anisotropy and PMA are investigated to study the dependence of magnetic moment on temperature.At the intersection points,the decreasing slope of the saturation magnetization（M s） changes because of the conversions.The dependence of M s on the annealing temperature and MgO thickness is also studied.     

Laser-induced voltage effects in CaaCoaO9 thin films on tilted LaAlO3（001） substrates grown by chemical solution deposition

Laser-induced voltage effects in c-axis oriented Ca3Co4O9 thin films have been studied with samples fabricated on 10°tilted LaAIO3 （001） substrates by a simple chemical solution deposition method. An open-circuit voltage with a rise time of about 10 ns and full width at half maximum of about 28 ns is detected when the film surface is irradiated by a 308-nm laser pulse with a duration of 25 ns. Besides, opemcircuit voltage signals are also observed when the film surface is irradiated separately by the laser pulses of 532 nm and 1064 nm. The results indicate that Ca3Co4O9 thin films have a great potential application in the wide range photodetctor from the ultraviolet to near infrared regions.     

Working Pressure Dependence of Properties of Al2O3 Thin Films Prepared by Electron Beam Evaporation

The effects of working pressure on properties of Al2O3 thin films are investigated. Transmittance of the Al2O3 thin film is measured by a Lambda 900 spectrometer. Laser-induced damage threshold （LIDT） is measured by a Nd：YAG laser at 355 nm with a pulse width of 7ns. Microdefects were observed under a Nomarski microscope. The samples are characterized by optical properties and defect, as well as LIDT under the 355 nm Nd：YAG laser radiation. It is found that the working pressure has fundamental effect on the LIDT. It is the absorption rather than the microdefect that plays an important role on the LIDT of Al2O3 thin film.     

Reduction of Ordering Temperature of FePt-Al2O3 Thin Films by N2 Addition During Sputtering

We investigate the effect of N2 addition during sputtering on the microstructure and magnetic properties of FePt-Al2O3 thin films. The texture of FePt phase in FePt-Al2O3 thin films changes from （111） to a more random orientation by N2 addition during sputtering. The ordering temperature of FePt phase reduces about 100℃ with appropriate N2 partial pressure. A larger coercivity of 6.0 × 10^5 Aim is obtained with N2 partial pressure about 15%. Structural analysis reveals that a small quantity of Fe3N phase forms during sputtering and the release of N atoms during the post annealing induces a large number of vacancies in the films, which benefits to the transformation of FePt phase from fcc to fct.     

Influence of Surface Transition Layers on Phase Transformation and Pyroelectric Properties of Ferroelectric Thin Film

Taking into account surface transition layers （STLs）, we study the phase transformation and pyroelectric properties of ferroelectric thin films by employing the transverse Ising model （TIM） in the framework of the mean field approximation. The distribution functions representing the intra-layer and inter-layer couplings between the two nearest neighbour pseudo-spins are introduced to characterize STLs. Compared with the results obtained by the traditional treatments for the thin films using only the single surface transition layer （SSL）, it is shown that the STL model reflects a more realistic and comprehensive situation of films. The effects of various parameters on the phase transformation properties have shown that STL can make the Curie temperature of the film higher or lower than that of the corresponding Sulk material, and the thickness of STL is a key factor influencing the film properties. For a film with definite thickness, there exists a critical STL thickness at which ferroelectricity will disappear when the intra-layer and inter-layer interactions are weak.     

Laser-induced voltage effects in Ca3Co4O9 thin films on tilted LaAlO3（001） substrates grown by chemical solution deposition

Laser-induced voltage effects in c-axis oriented Ca3Co4O9 thin films have been studied with samples fabricated on 10 tilted LaAlO3(001) substrates by a simple chemical solution deposition method. An open-circuit voltage with a rise time of about 10 ns and full width at half maximum of about 28 ns is detected when the film surface is irradiated by a 308-nm laser pulse with a duration of 25 ns. Besides, open-circuit voltage signals are also observed when the film surface is irradiated separately by the laser pulses of 532 nm and 1064 nm. The results indicate that Ca3Co4O9 thin films have a great potential application in the wide range photodetctor from the ultraviolet to near infrared regions.     

Deposition of hexagonal boron nitride thin films on silver nanoparticle substrates and surface enhanced infrared absorption

Silver nanoparticle thin films with different average particle diameters are grown on silicon substrates. Boron nitride thin films are then deposited on the silver nanoparticle interlayers by radio frequency （RF） magnetron sputtering. The boron nitride thin films are characterized by Fourier transform infrared spectra. The average particle diameters of silver nanoparticle thin films are 126.6, 78.4, and 178.8 nm. The results show that the sizes of the silver nanoparticles have effects on the intensities of infrared spectra of boron nitride thin films. An enhanced infrared absorption is detected for boron nitride thin film grown on silver nanoparticle thin film. This result is helpful to study the growth mechanism of boron nitride thin film.     

Control of crystallographic orientation in L10 FePt films by using Cr and CrW underlayers

The microstructure and magnetic properties of FePt films grown on Cr and CrW underlayers were investigated. The FePt films that deposited on Cr underlayer show (2 0 0) orientation and low coercivity because of the diffusion between FePt and Cr underlayer. The misfit between FePt magnetic layer and underlayer increases by small addition of W element in Cr underlayer or using a thin Mo intermediate layer, which is favorable for the formation of (0 0 1) orientation and the transformation of FePt from fcc to fct phase. A good FePt (0 0 1) texture was obtained in the films with Cr₈₅W₁₅ underlayer with substrate temperature of 400 °C. The FePt films deposited on Mo/Cr underlayer exhibit larger coercivity than that of the films grown on Pt/Cr₈₅W₁₅ because 5 nm Mo intermediate layer depressed the diffusion of Cr into magnetic layer.     

Effect of interfacial diffusion on microstructure and properties of FePt/B4C multifunctional multilayer composite films

FePt/B₄C multilayer composite films were prepared by magnetron sputtering and subsequent annealing in vacuum. By changing Fe layer thickness of [Fe/Pt]₆/B₄C films, optimal magnetic property (8.8 kOe and remanence squareness is about 1.0) is got in [Fe(5.25 nm)/Pt(3.75 nm)]₆/B₄C sample whose composition is Fe rich and near stoichiometric ratio. The characterizations of microstructure demonstrate that the diffusion of B and C atoms into FePt layer depends strongly on B₄C interlayer thickness. When B₄C interlayer thickness of [Fe(2.625 nm)/Pt(3.75 nm)/Fe(2.625 nm)/B₄C]₆ films is bigger than 3 nm, stable value of grain size (6-6.5 nm), coercivity (6-7 kOe) and hardness (16-20 GPa) is observed. Finally, the multifunctional single FePt/B₄C composite film may find its way to substitute traditional three-layer structure commonly used in present data storage technology.     

Assembly of high-anisotropy L10 FePt nanocomposite films

In this paper we report results on the synthesis and magnetic properties of L1₀ FePt nanocomposite films. Three fabrication methods have been developed to produce high-anisptropy FePt films: non-epitaxial growth of (0 0 1)-oriented FePt:X (X=Ag, C) composite films that might be used for perpendicular media; monodispersed FePt(CF_x) core–shell nanocluster-assembled films grown with a gas-aggregation technique and having uniform cluster size and narrow size distribution; and template-mediated self-assembled FePt clusters prepared with chemical synthesis by a hydrogen reduction technique, which has a high potential for controlling both cluster size and orientation. The magnetic properties are controllable through variations in the nanocluster properties and nanostructure. Analytical and numerical simulations have been done for these films, providing better understanding of the magnetization reversal mechanisms. The films show promise for development as magnetic recording media at extremely high areal densities.     

Stability Investigation of Colloidal FePt Nanoparticle Systems by Spectrophotometer Analysis

FePt magnetic nanoparticle systems are an excellent candidate for ultrahigh-density magnetic recording. Monodisperse FePt nanoparticles are synthesized by superhydride reduction of FECl2·4H2O and Pt （acac）2 at 263℃ under N2 atmosphere. Transmission electron microscopy （TEM） images show monosize EePt nanoparticles with diameter of 4 nm and a standard deviation of about 10%. The average distance between monodispesre particles is nearly 3 nm, and oleic acid and oleylamine surround the nanoparticles as surfactants. Stability investigation of nanoparticle colloidal solution is done via speetrophotometery analysis. The results for FePt nanoparticles dispersed in hexane indicate that adding surfactants with concentration of 3 × 10^-3 part by volume for centrifugation stage increases the stability of FePt nanoparticles solution with concentration of 16 mg/mL, about 67%.     

Structural and magnetic properties of FePt films grown on Cr1-xMox underlayers

FePt films were deposited on Cr_1-xMo_x underlayers by dc magnetron sputtering. The effects of the Mo content in the underlayers, underlayer thickness, substrate temperature, and FePt film thickness on the structural and magnetic properties of the FePt films were studied. Experimental results showed that the (200) textured Cr₉₀Mo₁₀ film was a promising underlayer for promoting the growth of the L1₀ FePt films with (001) preferred orientation at relatively low temperatures. With the Cr₉₀Mo₁₀ underlayers, the ordering process of the FePt films could start at 200 °C. Both the ordering degree and the out-of-plane coercivity (H_c) of the FePt films increased with an increase in substrate temperature. When the substrate temperature was ≥250 °C, the FePt films grown on the Cr₉₀Mo₁₀ underlayers could have the (001) preferred orientation. The FePt films grown on the Cr₉₀Mo₁₀ underlayers at different temperatures showed a continuous microstructure. The out-of-plane coercivities H_c decreased while the ordering degree increased with increased FePt film thickness, which could be due to the variation of the magnetic reversal mechanism from rotation predominant mode to domain wall motion predominant mode. PACS 68.55.Jk; 75.50.Ss     

Effect of magnetic field annealing on microstructure and magnetic properties of FePt films

FePt (20 nm) films were annealed in a magnetic field (along the normal direction of the films) at a temperature around the Curie temperature of L1₀ FePt. The influence of magnetic filed annealing on texture and magnetic properties of FePt films were investigated. The results indicate that preferential (0 0 1) orientation and perpendicular anisotropy can be obtained in L1₀ FePt films by using magnetic field annealing around the Curie temperature of L1₀ FePt. This is one of the potential methods to obtain (0 0 1) orientation and thus to improve the perpendicular anisotropy in FePt films.     

垂直取向FePt/Ag纳米颗粒薄膜的结构和磁性

用磁控溅射法在单晶MgO(100)基片上制备了［FePt 2 nm/Ag dnm］₁₀多层膜， 经真空热处理后，得到具有高矫顽力的垂直取向L1₀-FePt/Ag颗粒膜.x射线衍射结 果表明，在250 ℃的热基片上溅射，当Ag层厚度d=3—11 nm时，FePt颗粒具有很好的［001］取向，随着Ag层厚度的增加，FePt颗粒尺寸减小.［FePt 2 nm/Ag 9 nm］₁₀经过6 00 ℃真空热处理15 min后，颗粒大小仅约8 nm，垂直矫顽力达到692 kA/m.这种无磁耦合作用的颗粒膜，适合用作超高密度的垂直磁记录介质. 关键词： 磁控溅射 垂直磁记录 纳米颗粒膜 0-FePt/Ag')" href="#">L1₀-FePt/Ag     

缓冲层Ta对FePt薄膜L10有序相转变及矫顽力的影响

制备了Ta/FePt/C系列多层膜，研究了样品在不同温度退火后的磁特性和微结构.实验结果表明，不同厚度的Ta缓冲层具有不同的微结构特征，显著影响FePt层的L1₀有序相的形成及相应的矫顽力.当Ta缓冲层较薄，Ta层为非晶态，且较为粗糙，由此使FePt在界面处产生较多的缺陷并导致较高密度的晶界，在退火过程中，受束缚相对较弱的非晶态的Ta原子比较容易沿FePt的缺陷和晶界处向FePt层扩散，使FePt在相变过程中产生的应力比较容易释放，同时，Ta在扩散过程中产生的缺陷，降低了FePt有序 关键词： FePt薄膜 0相')" href="#">L1₀相 原子扩散     

Thickness dependence of microstructure and magnetic properties in FePt/B<Subscript>4</Subscript>C multilayer thin films

FePt/B₄C multilayer films with different single FePt layer thickness were prepared by magnetron sputtering and subsequently annealing in vacuum. Influence of single FePt layer thickness on microstructure and magnetic property of FePt/B₄C films is investigated. Experimental results suggest that the Fe and Pt rich regions will appear in the interior of single FePt layer. The increasing of FePt layer thickness leads to the increase of grain size and volume fraction of order phase f ₀, which eventually induce satisfied coercivity (5.8 kOe).