太阳能分光发电系统的光学薄膜滤波片设计与仿真

由于不同材料的禁带宽度不同,对太阳光谱的吸收曲线也各不相同,探讨了用等效折射概念设计滤光片的原理和计算方法.针对非晶硅、单晶硅和砷化镓的吸收谱线设计了一组短波通滤光片,滤波片A在波长380～800nm处,平均透射率T＞90％;在波长880～1100 nm处截止,平均透射率T＜1％;滤波片B在380～500 nm处T＞9...     

基于SOPC设计的红外图像直方图均衡器

基于Altera公司的SOPC-NIOSⅡ嵌入式软核处理器技术,提出了一种实现实时红外图像直方图均衡的设计方法.并在FPGA上实现了这一系统,使用Quartus Ⅱ软件中集成的SOPC Builder工具完成了整个系统的设计.该系统主要包括NIOS Ⅱ主控模块、存储器模块、自定制的直方图统计模块以及用户控制模块.实验结果表明,该系统具有体积小,功耗低,数据处理速度快,可靠性高等特点.     

Fabrication and optical properties of InGaN/GaN multiple quantum well light emitting diodes with amorphous BaTiO3 ferroelectric film

BaTiO3 （BTO） ferroelectric thin films are prepared by the sol,el method. The fabrication and the optical properties of an InGaN/GaN multiple quantum well light emitting diode （LED） with amorphous BTO ferroelectric thin film are studied. The photolumineseence （PL） of the BTO ferroelectric film is attributed to the structure. The ferroeleetric film which annealed at 673 K for 8 h has the better PL property. The peak width is about 30 nm from 580 nm to 610 nm, towards the yellow region. The mixed electroluminescence （EL） spectrum of InGaN/GaN multiple quantum well LED with 150-nm thick amorphous BTO ferroelectric thin film displays the blue-white light. The Commission Internationale De L＇Eclairage （CIE） coordinate of EL is （0.2139, 0.1627）. EL wavelength and intensity depends on the composition, microstructure and thickness of the ferroelectric thin film. The transmittance of amorphous BTO thin film is about 93% at a wavelength of 450 nm-470 nm. This means the amorphous ferroelectrie thin films can output more blue-ray and emission lights. In addition, the amorphous ferroelectric thin films can be directly fabricated without a binder and used at higher temperatures （200 ℃-400 ℃）. It is very favourable to simplify the preparation process and reduce the heat dissipation requirements of an LED. This provides a new way to study LEDs.     

Fabrication and optical properties of InGaN/GaN multiple quantum well light emitting diodes with amorphous BaTiO₃ ferroelectric film

BaTiO3(BTO) ferroelectric thin films are prepared by the sol-gel method.The fabrication and the optical properties of an InGaN/GaN multiple quantum well light emitting diode(LED) with amorphous BTO ferroelectric thin film are studied.The photoluminescence(PL) of the BTO ferroelectric film is attributed to the structure.The ferroelectric film which annealed at 673 K for 8 h has the better PL property.The peak width is about 30 nm from 580 nm to 610 nm,towards the yellow region.The mixed electroluminescence(EL) spectrum of InGaN/GaN multiple quantum well LED with 150-nm thick amorphous BTO ferroelectric thin film displays the blue-white light.The Commission Internationale De L’Eclairage(CIE) coordinate of EL is(0.2139,0.1627).EL wavelength and intensity depends on the composition,microstructure and thickness of the ferroelectric thin film.The transmittance of amorphous BTO thin film is about 93% at a wavelength of 450 nm-470 nm.This means the amorphous ferroelectric thin films can output more blue-ray and emission lights.In addition,the amorphous ferroelectric thin films can be directly fabricated without a binder and used at higher temperatures(200℃-400℃).It is very favourable to simplify the preparation process and reduce the heat dissipation requirements of an LED.This provides a new way to study LEDs.     

非晶钛酸锶钡薄膜的金属有机分解法制备及其光学性能

本文采用2-辛酸钡(Ba(C₈H₁₅O₂)₂)和3-甲基丁基醋酸盐(CH₃COOC₂H₄CH(CH₃)₂-)为基的特殊前驱体溶液,在硅和石英基片上低温制备Ba_0.7Sr_0.3TiO₃ (BST0.7)薄膜.性能测试结果表明,厚度约为214 nm的非晶BST0.7薄膜的光学带隙能和折射率分别为4.27 eV和n=1.94.薄膜在可见光和近红外区域的消光系数远远低于多晶BST薄膜,约为10^-3数量级.激发波长为450 nm时,在室温环境下非晶BST0.7薄膜在波长520—610 nm处发出强烈的可见光,峰值为540—570 nm,而结晶态的BST0.7薄膜则无发光现象. 关键词： 钛酸锶钡 非晶薄膜 金属有机分解法 光学性能