首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
研究了运动的粘性导电流体中可渗透收缩壁面上非稳态磁流体边界层流动,利用解析和数值方法对问题进行了研究,并考虑了壁面速度滑移的影响.提出了一个新的解析方法(DTM-BF),并将其应用于求解带有无穷远边界条件的非线性控制方程的近似解析解.对所有的解析结果和数值结果进行了对比,结果显示两者非常吻合,从而证明了DTM-BF方法的有效性.另外,对不同的参数,得到了控制方程双解和单解的存在范围.最后,分别讨论了滑移参数、非稳态参数、磁场参数、抽吸/喷注参数和速度比例参数对壁面摩擦、唯一解速度分布和双解速度分布的影响.  相似文献   

2.
研究了在速度滑移现象存在下,上随体Oldroyd-B流体绕加热的楔形体的非稳态流动。采用松弛-延迟热通量模型,模拟了传热过程和热延迟时间对传热的影响,通过考虑浮升力、热辐射和对流换热边界条件,进一步研究了流动及传热特性。利用同伦分析方法获得常微分方程组的近似解析解,发现滑移参数的增大可以促进流体的流动,以及流体的温度随热辐射参数增大而升高。此外还发现,温度场在热松弛时间和热延迟时间中出现相反的变化趋势。  相似文献   

3.
The present work examines the combined influence of variable thermal conductivity and viscosity on the irreversibility rate in couple stress fluid flow in between asymmetrically heated parallel plates. The dimensionless fluid equations are solved by using homotopy analysis method (HAM) and validated with Runge‐Kutta shooting method (RKSM). The convergent series solution is then used for the irreversibility analysis in the flow domain. The effects of thermal conductivity and viscosity variation parameters, couple stress parameter, Reynolds number, Grashof number, Hartmann number on the velocity profile, temperature distribution, entropy production, and heat irreversibility ratio are presented through graphs, and salient features of the solutions are discussed. The computations show that the entropy production rate decreases with increased magnetic field and thermal conductivity parameters, whereas it rises with increasing values of couple stress parameter, Brinkman number, viscosity variation parameter, and Grashof number. The study is relevant to lubrication theory.  相似文献   

4.
The entrained flow and heat transfer of a non-Newtonian third grade fluid due to a linearly stretching surface with partial slip is considered. The partial slip is controlled by a dimensionless slip factor, which varies between zero (total adhesion) and infinity (full slip). Suitable similarity transformations are used to reduce the resulting highly nonlinear partial differential equations into ordinary differential equations. The issue of paucity of boundary conditions is addressed and an effective second order numerical scheme has been adopted to solve the obtained differential equations even without augmenting any extra boundary conditions. The important finding in this communication is the combined effects of the partial slip and the third grade fluid parameter on the velocity, skin-friction coefficient and the temperature field. It is interesting to find that the slip and the third grade fluid parameter have opposite effects on the velocity and the thermal boundary layers.  相似文献   

5.
Research on optimization of entropy generation in nanofluid flow gained much interest. In this study, the Walter's-B nanofluid flow is considered to analyze the irreversibility in cubic autocatalysis. Fluid motion is considered in presence of viscous dissipation, magnetohydrodynamics (MHD), radiation, and heat generation absorption. Homotopy analysis method (HAM) is employed to solve nonlinear ordinary differential system. Results show that fluid flow reduces for larger Weissenberg and Hartman numbers. Temperature gradually enhances for larger Weissenberg number and radiation parameter. For higher estimation of thermophoresis parameter, the temperature and concentration are enhanced. Opposite impact of Hartman and Weissenberg numbers is noticed for entropy generation and Bejan number. Disorderedness and Bejan number are reduced near the sheet, while the opposite trend is seen away from the sheet.  相似文献   

6.
In this investigation, thermal radiation effect over an electrically conducting, Newtonian fluid in a steady laminar magnetohydrodynamic convective flow over a porous rotating infinite disk with the consideration of heat and mass transfer in the presence of Soret and Dufour diffusion effects is investigated. The partial differential equations governing the problem under consideration are transformed by a similarity transformation into a system of ordinary differential equations which are solved numerically using fourth order Runge–Kutta based shooting method. The effects of the magnetic interaction parameter, slip flow parameter, Soret number, Dufour number, Schmidt number, radiation parameter, Prandtl number and suction parameter on the fluid velocity, temperature and concentration distributions in the regime are depicted graphically and are analyzed in detail. The corresponding skin-friction coefficients, the Nusselt number and the Sherwood number are also calculated and displayed in tables showing the effects of various parameters on them.  相似文献   

7.
The present paper is concerned with the study of flow and heat transfer characteristics in the unsteady laminar boundary layer flow of an incompressible viscous fluid over continuously stretching permeable surface in the presence of a non-uniform heat source/sink and thermal radiation. The unsteadiness in the flow and temperature fields is because of the time-dependent stretching velocity and surface temperature. Similarity transformations are used to convert the governing time-dependent nonlinear boundary layer equations for momentum and thermal energy are reduced to a system of nonlinear ordinary differential equations containing Prandtl number, non-uniform heat source/sink parameter, thermal radiation and unsteadiness parameter with appropriate boundary conditions. These equations are solved numerically by applying shooting method using Runge–Kutta–Fehlberg method. Comparison of numerical results is made with the earlier published results under limiting cases. The effects of the unsteadiness parameter, thermal radiation, suction/injection parameter, non-uniform heat source/sink parameter on flow and heat transfer characteristics as well as on the local Nusselt number are shown graphically.  相似文献   

8.
This work investigates entropy generation in a steady flow of viscous incompressible fluids between two infinite parallel porous plates. The fluid temperature variation is due to asymmetric heating of the porous plates as well as viscous dissipation. Two different physical situations are discussed with their entropy generation profiles: (i) Couette flow with suction/injection and (ii) pressure-driven Poiseuille flow with suction/injection. In each case, closed form expressions for entropy generation number and Bejan number are derived in dimensionless form by using the expressions for velocity and temperature which are derived by solving the resulting momentum and energy equations by the method of undetermined coefficient. The effect of the governing parameters on velocity, temperature, entropy generation and Bejan number are extensively discussed with the help of graphs. It is interesting to remark that entropy generation number increases with suction on one porous plate while it decreases on the other porous plate with injection.  相似文献   

9.
The steady flow and heat transfer arising due to the rotation of a non-Newtonian fluid at a larger distance from a stationary disk is extended to the case where the disk surface admits partial slip. The constitutive equation of the non-Newtonian fluid is modeled by that for a Reiner–Rivlin fluid. The fluid is subjected to an external uniform magnetic field perpendicular to the plane of the disk. The momentum equation gives rise to a highly nonlinear boundary value problem. Numerical solution of the governing nonlinear equations are obtained over the entire range of the physical parameters. The effects of slip, non-Newtonian fluid characteristics and the magnetic interaction parameter on the momentum boundary layer and thermal boundary layer are discussed in detail and shown graphically. It is observed that slip has prominent effects on the velocity and temperature fields.  相似文献   

10.
This work presents a boundary integral equation formulation for Stokes nonlinear slip flows based on the normal and tangential projection of the Green's integral representational formulae for the velocity field. By imposing the surface tangential velocity discontinuity (slip velocity) in terms of the nonlinear slip flow boundary condition, a system of nonlinear boundary integral equations for the unknown normal and tangential components of the surface traction is obtained. The Boundary Element Method is used to solve the resulting system of integral equations using a direct Picard iteration scheme to deal with the resulting nonlinear terms. The formulation is used to study flows between curved rotating geometries: i.e., concentric and eccentric Couette flows and single rotor mixers, under nonlinear slip boundary conditions. The numerical results obtained for the concentric Couette flow is validated again a semianalytical solution of the problem, showing excellent agreements. The other two cases, eccentric Couette and single rotor mixers, are considered to study the effect of different nonlinear slip conditions in these flow configurations. © 2012 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2013  相似文献   

11.
We design a suitable fitted operator finite difference method (FOFDM) to solve a model of an unsteady transient magnetohydrodynamic (MHD) free convective and mass transfer flow with thermophoresis past an inclined permeable plate in the presence of chemical reaction, thermal radiation, and temperature dependent viscosity. The governing nonlinear partial differential equations in the current model are transformed by a suitable similarity transformation into a system of ordinary differential equations which are then solved numerically using the FOFDM. The superiority of the proposed FOFDM over the standard finite difference method is proved theoretically and numerically. Furthermore, we illustrate the effect of various parameters on the temperature, concentration and velocity profiles using the FOFDM. It is observed that an increase in the viscosity parameter leads to a decrease in the temperature and an increase in the velocity. Results also show that an increase in the thermophoretic parameter leads to a decrease in the concentration. © 2015 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 32: 106–120, 2016  相似文献   

12.
The steady flow arising due to the rotation of a non-Newtonian fluid at a larger distance from a stationary disk is extended to the case where the disk surface admits partial slip. The constitutive equation of the non-Newtonian fluid is modeled by that for a Reiner–Rivlin fluid. The momentum equation gives rise to a highly nonlinear boundary value problem. Numerical solution of the governing nonlinear equations are obtained over the entire range of the physical parameters. The effects of slip and non-Newtonian fluid characteristics on the momentum boundary layer are discussed in details. It is observed that slip has prominent effect on the velocity field, whereas a predominant influence of the non-Newtonian parameter is observed on the moment coefficient.  相似文献   

13.
The steady Von Kármán flow and heat transfer of an electrically conducting non-Newtonian fluid is extended to the case where the disk surface admits partial slip. The fluid is subjected to an external uniform magnetic field perpendicular to the plane of the disk. The constitutive equation of the non-Newtonian fluid is modeled by that for a Reiner–Rivlin fluid. The momentum equations give rise to highly non-linear boundary value problem. Numerical solutions for the governing non-linear equations are obtained over the entire range of the physical parameters. The effects of slip, magnetic parameter and non-Newtonian fluid characteristics on the velocity and temperature fields are discussed in detail and shown graphically. Emphasis has been laid to study the effects of viscous dissipation and Joule heating on the thermal boundary layer. It is interesting to find that the non-Newtonian cross-viscous parameter has an opposite effect to that of the slip and the magnetic parameter on the velocity and the temperature fields.  相似文献   

14.
In this paper, we present similarity solutions for the nano boundary layer flows with Navier boundary condition. We consider viscous flows over a two-dimensional stretching surface and an axisymmetric stretching surface. The resulting nonlinear ordinary differential equations are solved analytically by the Homotopy Analysis Method. Numerical solutions are obtained by using a boundary value problem solver, and are shown to agree well with the analytical solutions. The effects of the slip parameter K and the suction parameter s on the fluid velocity and on the tangential stress are investigated and discussed. As expected, we find that for such fluid flows at nano scales, the shear stress at the wall decreases (in an absolute sense) with an increase in the slip parameter K.  相似文献   

15.
从理论上研究了具有非线性延伸表面的磁流体在滑移流区的动量传输问题.通过Lie群变换把控制方程组转化为常微分方程组,利用同伦分析方法求得了问题的近似解析解.获得的级数解与文献中的数值解吻合得较好.另外,利用级数解分析滑移参数、磁场强度、速度比率参数、吸入喷注参数和幂律指数对流动的影响.结果显示这些参数对壁剪切力和边界层内流场有较大的影响.  相似文献   

16.
The aim of the study is to examine the stagnation point flow of a dusty Casson fluid over a stretching sheet with thermal radiation and buoyancy effects. The governing boundary layer equations are represented by a system of partial differential equation. After applying suitable similarity transformations, the resulting boundary layer equations are solved numerically using the Runge Kutta Fehlberg fourth-fifth order method (RKF-45 method). The behaviors of velocity, temperature and concentration profiles of fluid and dusty particles with respect to change in fluid particle interaction parameter, Casson paramter, Grashof number, radiation parameter, Prandtl number, number density, thermal equilibrium time, relaxation time, specific heat of fluid and dusty particles, ratio of diffusion coefficients, Schmidt number and Eckert number are analysed graphically and discussed. Our computed results interpret that velocity distribution decays for higher estimation of Casson parameter while temperature distribution shows increasing behavior for larger radiation parameter.  相似文献   

17.
In this work, the effects of slip velocity on the flow and heat transfer for an electrically conducting micropolar fluid over a permeable stretching surface with variable heat flux in the presence of heat generation (absorption) and a transverse magnetic field are investigated. The governing partial differential equations describing the problem are converted to a system of non-linear ordinary differential equations by using the similarity transformation, which is solved numerically using the Chebyshev spectral method. The effects of the slip parameter on the flow, micro-rotation and temperature profiles as well as on the local skin-friction coefficient, the wall couple stress and the local Nusselt number are presented graphically. The numerical results of the local skin-friction coefficient, the wall couple stress and the local Nusselt number are given in a tabular form and discussed.  相似文献   

18.
In this article, approximate analytical (series) solutions for the temperature distribution in a longitudinal rectangular and convex parabolic fins with temperature dependent thermal conductivity and heat transfer coefficient are derived. The transient heat conduction problem is solved for the first time using the two-dimensional differential transform method (2D DTM). The effects of some physical parameters such as the thermo-geometric parameter, exponent and thermal conductivity gradient on temperature distribution are studied. Furthermore, we study the temperature profile at the fin tip.  相似文献   

19.
In this study, we analyze the magnetohydrodynamic flow of magnetite-engine oil nanofluid in the presence of nonidentical shaped nanoparticles subject to the porous medium and velocity slip effect. Energy analysis is carried out with the Ohmic heating and thermal radiation impacts. The system of partial differential equations are transformed into the system of ordinary differential equations using similarity variable. The Hamilton–Crosser model is used. The exact solutions for the momentum and heat transport analysis are found. The impact of various emerging parameters on the velocity and temperature profiles are analyzed by graphs. Furthermore, the local skin friction and heat transfer rate are examined graphically. It is examined that the velocity field increases with an increment in the magnitude of ϕ and L. An increase in the value of Hartman number enhancing the temperature profile.  相似文献   

20.
陈胜 《应用数学和力学》2012,33(11):1330-1339
后台阶流动是研究伴随有传热现象的分离流动的常用模型.虽然Richardson数的改变会明显影响分离流动的流动和传热特性,但是迄今为止关于Richardson数对后台阶流动熵产影响的研究依然很少.基于求解熵产方程,第一次系统研究Richardson数对后台阶流动熵产的影响.对于求解熵产方程所需的速度和温度等变量,通过格子Boltzmann方法来得到.通过上述工作可以发现,后台阶流动中熵产和Bejan数的分布随Richardson数变化显著.总熵产数是Richardson数的单调减函数而平均Bejan数是Richardson数的单调增函数.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号