具有滞后的变系数系统的稳定性

具有时滞的变系数系统也称为时变线性微分差分系统.秦元勋,王联,王慕秋采用冻结系数的方法,廖晓昕利用迭代法,张学铭构造二次型加积分项的函数,徐道义利用比较定理与向量函数(后来,文[5]也采用了此法)分别研究了这类系统的稳定性.本文则建立了较向量函数更为灵活的广义向量 V 函数法,并利用它给出了具有滞后的线性单结构系统与复合系统以及一些特殊的非线性系统稳定性的条件.     

基于条件失效率的串和并联系统的失效率刻画

由于条件失效率有很好的直观意义且易获得,用它们去刻画相关部件组成的串或并联的系统失效率是一条有效的新途径.但并联系统失效率的表示过于复杂.由此,新定义过程失效率向量,但仍基于条件失效率,从另一方面描述并联系统的整个失效状况,并用Basu定义二维失效率说明其应用.最后,将以上两种刻画方式统一为系统过程失效率函数.     

全局半稳定的Leinard系统的充要条件

本文研究了Leinard系统的全局半稳定问题,获得了系统为全局半稳定的充要条件,且推广和改进了[5]的结果。     

变系数时滞积微分系统的稳定性

本文给出了变系数时滞积微分系统稳定性的积分判据,利用一个简单的降阶方法并结合积分判据,给出了积微分大系统稳定性的一个充分性判据。文末用实例说明了方法的有效性。     

ARMAX系统不外加输入激励的辨识

本文在不外加输入激励情况下，讨论了开环不稳定和非最小相位的ARMAX系统系数的一致估计．所用方法是用适应镇定的办法，使得闭环系统成为平稳可逆的ARMA过程，然后利用Yule-Walker方程给出闭环系统系数的一致估计，而把求开环系统系数的一致估计归结为解一组线性代数方程。     

两类非线性系统的全局稳定性

本文利用 Liapunov 函数方法和论证系统正半轨线有界的 Shimanov区域方法,给出了两类非线性系统的零解为全局稳定的充分条件,并讨论了一些低阶实例,得到了较好的结果.     

串联系统的模糊可靠性

这篇文章是“模糊可靠性”的续篇之一。文中作者建立了串联系統模糊可靠性的计算模型,并依据模糊可靠性的基本概念和原理推导出一套计算公式。     

关于不连续动态系统的强实用稳定性

本文发展了在文献[1]中所提出的强实用稳定的概念;在此基础上,分别研究了具有内扰和外扰的两类不连续动态系统的强实用稳定性,强实用一致稳定性和非强实用稳定性;分别得到了这两类系统具有相应稳定性的判别准则;最后,还给出例子,说明这些判别准则的应用。     

非自治Kolmogorov竞争系统的严格正解

In this paper, the existence of strictly positive solutions for N species normutonomous Kolmogorov competition systems is studied. By applying the Schauder‘s flxed pointtheorem some new sufficient conditions are established. In particular, for the almost periodicsystem, tile existence of strictly positive almost periodic solutiorts is obtained, Some previousresults are improved and generalized.     

Boundary-Value Problems of the Theory of Thin and Nonthin Orthotropic Shells with Account of Nonlinearly Elastic Properties and Low Shear Rigidity of Composite Materials

The basic geometric and physical relations and resolving equations of the theory of thin and nonthin orthotropic composite shells with account of nonlinear properties and low shear rigidity of their materials are presented. They are derived based on two theories, namely the theory of anisotropic shells employing the Timoshenko or Kirchhoff-Love hypothesis and the nonlinear theory of elasticity and plasticity of anisotropic media in combination with the Lagrange variational principle. The procedure and algorithm for the numerical solution of nonlinear (linear) problems are based on the method of successive approximations, the difference-variational method, and the Lagrange multiplier method. Calculations of the stress-strain state for a spherical shell with a circular opening loaded with internal pressure are presented. The effect of transverse shear strains and physical nonlinearity of the material on the distribution of maximum deflections and circumferential stresses in the shell, obtained according to two variants of the shell theories, is studied. A comparison of the results of the problem solution in linear and nonlinear statements with and without account of the shell shear strains is given. The numerical data obtained for thin and nonthin (medium thick) composite shells are analyzed.     

Effects of permeability and viscosity in linear polymeric gels

We propose and analyze a mathematical model of the mechanics of gels, consisting of the laws of balance of mass and linear momentum of the polymer and liquid components of the gel. We consider a gel to be an immiscible and incompressible mixture of a nonlinearly elastic polymer and a fluid. The problems that we study are motivated by predictions of the life cycle of body‐implantable medical devices. Scaling arguments suggest neglecting inertia terms, and therefore, we consider the quasi‐static approximation to the dynamics. We focus on the linearized system about stress‐free states, uniform expansions, and compressions and derive sufficient conditions for the solvability of the time‐dependent problems. These turn out to be conditions that guarantee local stability of the equilibrium solutions. We also consider non‐stress free equilibria and states with residual stress and derive an energy law for the corresponding time‐dependent system. The conditions that guarantee stability of solutions provide a selection criteria of the material parameters of devices. The boundary conditions that we consider are of two types, displacement‐traction and permeability of the gel surface to the fluid. We address the cases of viscous and inviscid solvent, assume Newtonian dissipation for the polymer component, and establish existence of weak solutions for the different boundary permeability conditions and viscosity assumptions. We present two‐dimensional, finite element numerical simulations to study stress concentration on edges, this being the precursor to debonding of the gel from its substrate. Copyright © 2015 John Wiley & Sons, Ltd.     

非线性优化方法在大气和海洋科学数值研究中的若干应用

控制大气和海洋运动的模式是复杂的非线性模式,在考虑到线性奇异向量和线性奇异值只能描述切线性模式有效时段内小扰动发展的情况下,介绍了作者们近年来用非线性优化方法数值研究大气和海洋科学的有关工作,其中包括非线性奇异向量和非线性奇异值、条件非线性最优扰动、以及它们在数值天气和气候可预报性研究中的应用．结果表明,上述非线性优化方法在很大程度上揭示了大气和海洋运动的非线性特征;此外,对可预报性问题的新分类也做了详细介绍,即最大可预报时间、最大预报误差和最大允许初始误差A·D2这种分类的应用背景是针对数值天气预报和气候预测产品的评价;最后,讨论了数值模式敏感性分析的非线性优化方法,该方法在一定条件下可以定量识别模式误差和初始误差,量化判断数值模式的模拟能力．     

A 3D modeling of static and forward smoldering combustion in a packed bed of materials

A three-dimensional (3D) model based on the first principles of mass, momentum and energy was developed that numerically simulates the processes of static and forward smoldering in a porous packed bed of plant materials. The packed bed contains cellulose material or tobacco (cigarette) wrapped in a porous paper and surrounded by an ambient air. Other major characteristics of the model are including the effects of buoyancy forces in the flow field, separate treatment of solid and gas in a thermally non-equilibrium environment, and use of multi-precursor kinetic models for the pyrolysis of staring material and oxidation of char. The changes in porosity due to pyrolysis and char oxidation and the effect of porosity on the bed permeability and gas diffusivity are included. The mass, momentum, energy, and species transport equations are solved in a discretized computational domain using a commercially available computational fluid dynamics (CFD) code. The simulation results show that the model reasonably reproduces the major features of a burning cigarette during smoldering and puffing and are in a good agreement with the existing experimental results for cigarettes. Results include the velocity profiles, gas and solid temperatures, coal shape, burn rates, profile and transport of gas and vapor species throughout the packed bed, dilution through the wrapper paper and ventilation in the filter section, and the mass fraction of some pyrolysis and oxidation products in the mainstream and sidestream flows.     

数量折扣契约下制造商与零售商库存合作联盟的稳定性

针对实际中存在的不同形式合作联盟,研究了零售商库存合作联盟,以及制造商与零售商库存合作联盟所形成混合合作联盟的稳定性。在随机需求情况下,制造商通过自身中心仓库向多个零售商提供数量折扣契约,首先证明了两个合作联盟的最优运作决策都存在且唯一,并给出了制造商向零售商库存合作联盟提供数量折扣契约的形式,然后分析了两种合作联盟的稳定性,并得出混合合作联盟的总期望利润要高于零售商库存合作联盟的结论。     

行业结构环境的序参量分析方法研究

行业结构环境分析是发现和掌握行业运行规律与发展状况的必经之路,也是在企业战略管理中的重要组成部分,其结果直接影响着企业战略决策与实施。针对企业战略管理的新价值理念,本文在协同学与竞优理论的基础上,通过对行业内群体结构特性与企业行为的重新考察,建立了行业结构环境分析的一种新方法即序参量分析方法与其应用范例。本文的研究结果,如行业内多层结构、企业群组定位及分布特性、行业基本发展模式、标杆与协同伙伴、企业群组或群组内企业构成与绩效之间的关系等都可为实现符合现代产业发展环境的企业战略管理提供方向性辅助与技术支持。     

我国经济产出与钢社会蓄积的关联分析

基于动态物质流分析方法及时间序列分析方法,本文以我国1949-2012年年度数据为样本,研究了工业化演进过程中我国经济产出与钢社会蓄积之间的关联。研究结果表明,随着经济的发展和工业化进程的演进,钢以实物产品的形式不断蓄积于我国社会当中,且蓄积的速度不断加快。我国经济产出与钢的社会蓄积之间存在长期协整关系,钢的社会蓄积既能在短期内推动经济的增长,又影响着经济产出的长期整体走势,而经济产出只是钢社会蓄积变化的长期原因。这说明我国的经济建设高度依赖钢的使用,而且经济增长对钢需求的拉动是一个长期的过程,不会在短期内对钢的需求造成显著影响。     

网约车新政下平台和乘客的Stackelberg博弈模型及策略研究

近年来,滴滴和优步等网约车平台的出现给城市居民出行带来了新的选择,然而随着新政的实施以及垄断巨头的酝酿诞生,网约车平台是否会降补贴提车价成为消费者最为关心的问题。文章构建网约车平台和乘客之间的Stackelberg博弈模型,分析了网约车平台的补贴和抽成策略对乘客是否选择网约车出行的决策行为以及网约车市场均衡的影响。理论研究和仿真结果表明:网约车平台合理的补贴力度和抽成力度可以有效规避行政监管成本增加和乘客资源流失的风险,提高双方的收益,实现社会的帕累托最优。     

关系治理与契约治理导向匹配状态的量化研究——以公私合作模式下A地铁项目为例

近年来关系治理(RG)、契约治理导向(CG)是项目管理领域研究较多的议题,但是关于二者匹配状态的量化研究却很少。为此,基于问卷调研数据,利用相关性权重法对RG状态、CG状态进行了量化,在此基础上,构建了RG与CG匹配模型,并进行了案例分析。研究结果表明:对RG状态、CG状态的量化研究具有可行性,且实现了对RG与CG最佳匹配状态的量化研究。以上研究结论有助于理解RG与CG的匹配机理,对实现二者的有效匹配及项目绩效的改善具有重要的理论和实践指导意义。     

Structure and Properties of Nanocrystalline Oxide Powders

The crystalline and porous structure of superfine powders and fibers made of alumina and zirconia doped with yttria is investigated. The particle sizes were determined by the methods of coherent dispersion and scanning transmission electron microscopy. Based on data on the sizes of crystallites of the metal oxides, which were obtained by different methods, it is found that crystalline transformations of the oxides lead to dispersion of the materials. The structural transformations of the superfine oxides are accompanied by changes in crystallite sizes and in the character and size of pores. The laws established allow one to purposefully control the process of producing nanostructured oxide powders and fibers, which can be utilized as active fillers for composite materials based on various matrices. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 6, pp. 831–840, November–December, 2005.