超连续Domain与拟超连续Domian

讨论了超连续domain与拟超连续domain的相关性质,证明了超连续半格范畴为有性质M*的拟超连续domain范畴的反射子范畴。     

导算子连续和一致连续的充要条件

专著[1]论及导算子连续和一致连续的充要条件,给出过于下的定理。 设T_r={x|‖x-x_o‖0)有界.(见[1]36面定理3.8) 本文改进了以上结果。     

单子理论对拓扑等度连续与均匀连续的刻画及其应用

在扩大模型下,应用单子理论给出了拓扑等度连续和均匀连续的非标准刻画,并应用均匀连续的非标准特征证明了网收敛与均匀连续之间的关系,最后应用拓扑等度连续和均匀连续的非标准特征证明了拓扑等度连续和均匀连续之间的关系.     

I-fuzzy拓扑中的几乎连续与δ-连续

在I-fuzzy拓扑空间框架下引入了I-fuzzy正则开集、I-fuzzyδ-开集等基本概念,进一步,在此基础上又给出了I-fuzzy几乎连续、I-fuzzyδ-连续的概念,且分别研究了I-fuzzy几乎连续、I-fuzzyδ-连续的基本性质.     

连续信息代数

给出基于自由域信息代数和带论域信息代数上的连续性概念.证明在城集格有最大元的情况下,两种连续性之间是相互对应的.定义了连续信息代数之间的连续映射的概念,证得:若(φ,D),(ψ,E)都是强连续的信息代数.则([φ→ψ]c,D×E)也是强连续的.     

关于左连续蕴涵算子的连续逼近问题

从阿基米德型t-范定义的剩余型蕴涵算子是连续的蕴涵算子出发，研究关于左连续的蕴涵算子Ro和Godel蕴涵算子心'的连续逼近问题，从而进一步为模糊推理寻求理论基础。     

Wm2(Rn)中连续泛函及连续算子的神经网络逼近

本文主要讨论定义在Sobolev空间W2^m(R^n)中紧集上连续泛函及连续算子的逼近。     

交C-连续偏序集

利用偏序集上的半拓扑结构,引入了交C-连续偏序集概念,探讨了交C-连续偏序集的性质、刻画及与C-连续偏序集、拟C-连续偏序集等之间的关系.主要结果有:(1)交C-连续的格一定是分配格;(2)有界完备偏序集(简记为bc-poset)L是交C-连续的当且仅当对任意x∈L及非空Scott闭集S,当∨S存在时有x∧∨S=∨{x∧s:s∈S};(3)完备格是完备Heyting代数当且仅当它是交连续且交C-连续的;(4)有界完备偏序集是C-连续的当且仅当它是交C-连续且拟C-连续的;(5)获得了反例说明分配的完备格可以不是交C-连续格,交C-连续格也可以不是交连续格.     

相容连续Domain的不变性

引入了Scott相容连续映射与商相容Domain等概念,研究了Scott相容连续映射保局部基与保waybelow序及保局部基与保紧元之间的关系,证明了相容连续Domain或相容代数Domain在保局部基的Scott相容连续满映射下保持不变.     

ZC-连续格

对于广义理想子集系统Z,引入ZC-连续格和ZC-代数格的概念,讨论它们的一些性质。特别地,证明当ZC-连续格P中的关系Z满足插入性质时,P可嵌入到方体中。     

颤振分析中的特征值排序问题

颤振分析中判断颤振临界速度的重要依据是系统V-g和V-f图,即系统特征值随参数的变化曲线.在几乎所有商用软件及自编程序的输出结果中,有时会出现所谓的"窜支"现象,这给颤振临界速度和颤振穿越分支及耦合形式的判断带来很大不便.通过隐函数定理可以证明,除重特征值点以外,系统特征值连续依赖于系统参数变化.依据多元向量值函数连续性,建立对特征值的排列算法,给出系统特征根轨迹的正确曲线,再输出V-g和V-f图数据,从而避免"窜支"现象.编制应用程序,通过几个典型算例对算法进行了验证.该工作能够有效简化颤振分析的后处理工作,提高分析效率.     

On the hyperbolicity of the period-doubling fixed point

We give a new proof of the hyperbolicity of the fixed point for the period-doubling renormalization operator using the local dynamics near a semi-attractive fixed point (in a Banach space) and the theory of holomorphic motions. We also give a new proof of the exponential contraction of the Feigenbaum renormalization operator in the hybrid class of the period-doubling fixed point: our proof uses the non-existence of invariant line fields in the period-doubling tower (C. McMullen), the topological convergence (D. Sullivan), and a new infinitesimal argument.

     

考虑服务和退货的双渠道供应链定价问题研究

在考虑零售服务和消费者退货情况下,运用两阶段优化方法分别探究了集中式和分散式两种双渠道供应链的最优定价策略。研究发现零售服务有助于提高零售商的渠道权力,并始终使制造商获益,但只有当服务水平小于某一临界值时,才使制造商和零售商同时得到帕累托改进。零售价格和直销价格与退货率正相关,而与服务水平的关系受渠道结构的影响。服务水平的提高加剧了供应链的“双重边际化”效应,制造商通过生产与消费者需求相匹配的产品来降低退货风险可以减弱这种效应,从而提高供应链效率。     

树脂基复合材料粘接的优化设计

本文在试验数据和理论分析的基础上,提出树脂基复合材料单搭接的优化设计的原则,胶粘剂的选择、被粘物的设计,粘接长度的选择、胶层厚度的选择等.认为通过优化设计可以提高粘接强度,减轻产品的重量,提高其质量.     

带有免疫和传染年龄的传染病模型

建立了带有免疫和传染年龄的传染病模型,这种传染病带有病原体Ⅰ或Ⅱ,病原体Ⅰ可发展为病原体Ⅱ,得到了无病平衡态全局稳定和局部稳定的条件.当病原体Ⅰ不发展为病原体Ⅱ时,得到了病原体Ⅰ类平衡态的稳定性依赖于病原体Ⅱ类的基本再生指数.     

Stress intensity factors for a finite plate with an inclined crack by boundary collocation

In this paper, we combine the Muskhelishvili＇s complex variable method and boundary collocation method, and choose a set of new stress function based on the stress boundary condition of crack surface, the higher precision and less computation are reached. This method is applied to calculating the stress intensity factor for a finite plate with an inclined crack. The influence of θ （the obliquity of crack） on the stress intensity factors, as well as the number of summation terms on the stress intensity factor are studied and graphically represented.     

拍卖机制设计在区块链中的应用与挑战

区块链是新一代信息技术的重要组成部分,是分布式网络、加密技术、智能合约等多种技术集成的新型数据库软件。过去的十多年,区块链技术在全球范围内产生广泛影响。如今的区块链技术,已从最初的关注于解决货币和支付的去中心化问题,转入到解决市场的去中心化问题。智能合约的出现使得基于区块链技术的去中心化金融进入高速发展状态,也涌现出区块链环境下的各类拍卖场景。本文首次从机制设计角度,以区块链交易费机制,非同质化代币(Non-Fungible Token,NFT)拍卖和矿工可提取价值(Miner-Extractable Value,MEV)交易位置拍卖为主要对象,总结和剖析近些年来区块链上特有的拍卖机制;并针对区块链特性,提出区块链上拍卖机制设计所面临的挑战和未来亟待解决的问题。     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

Modelling and simulation of micro-well formation

Physico-chemical processes on the micro-scale require new modelling concepts because some effects become dominating that are negligible for macroscopic systems. This is illustrated by a new method for the production of micro-wells based on the placement of a small drop of toluene on a plate of polystyrene. After droplet evaporation, a micro-well is left. A mathematical model has been developed to understand the elementary processes of the micro-well formation. The model accounts for: (1) growth of the drop on the substrate, (2) evaporation process of the solvent, (3) dissolution of the substrate, (4) flow rate in the evaporating drop caused by the pinning effect, including the vertical velocity profile, and (5) increase in the concentration of dissolved material followed by precipitation. In the modelling and simulation process, it could be shown that the method of drop production also has a significant influence on the shape of the micro-wells.     

A perturbed risk model with dependence between premium rates and claim sizes

This paper considers a dependent risk model with diffusion for the surplus of an insurer, in which a current premium rate will be adjusted after a claim occurs and the adjusted rate is determined by the amount of the claim. At the same time, the diffusion is changed correspondingly. Using Rouché’s theorem, we first derive the closed-form solution for the Laplace transform of the survival probability in the dependent risk model. Then, using the Laplace transform, we derive a defective renewal equation satisfied by the survival probability. For the exponential claim sizes, we present the explicit recursion expression for the survival probability, by which we can exactly solve the survival probability step-by-step. We also illustrate the influence of the model parameters in the dependent risk model on the survival probability by numerical examples.