Synthesis of PNIPAM polymer brushes on reduced graphene oxide based on click chemistry and RAFT polymerization

Preparation and characterization of poly(N‐isopropylacrylamide) (PNIPAM) polymer brushes on the surfaces of reduced graphene oxide (RGO) sheets based on click chemistry and reversible addition‐fragmentation chain transfer (RAFT) polymerization was reported. RGO sheets prepared by thermal reduction were modified by diazonium salt of propargyl p‐aminobenzoate, and alkyne‐functionalized RGO sheets were obtained. RAFT chain transfer agent (CTA) was grafted to the surfaces of RGO sheets by click reaction. PNIPAM on RGO sheets was prepared by RAFT polymerization. Fourier transform‐infrared spectroscopy, thermogravimetric analysis, X‐ray photoelectron spectroscopy, and transmission electron microscopy (TEM) results all demonstrated that RAFT CTA and PNIPAM were successfully produced on the surfaces of RGO sheets. Nanosized PNIPAM domains on RGO sheets were observed on TEM. Micro‐DSC result indicated that in aqueous solution PNIPAM on RGO sheets presented a lower critical solution temperature at 33.2 °C. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Research on WPU‐RGO/ATP‐Fe3O4/chitosan composites with excellent electrical and magnetic properties

First, attapulgite‐Fe₃O₄ magnetic filler (ATP‐Fe₃O₄) was prepared by using a chemical precipitation method. Subsequently, graphite oxide (GO) was prepared through Hummer method, and then reduced GO (RGO) was prepared through GO reduced by chitosan (CS). Finally, a series of WPU‐RGO/ATP‐Fe₃O₄/CS composites were prepared by introduced RGO/ATP‐Fe₃O₄/CS to waterborne polyurethane. The structure and properties were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometry (VSM), thermogravimetric analysis TGA, conductivity test, and tensile test. The experimental results indicated that thermal stability and tensile strength of nanocomposites were improved with the increase of the content of RGO/ATP‐Fe₃O₄/CS. Meanwhile, with the increase of the RGO/ATP‐Fe₃O₄/CS content, the electrical and magnetic properties of WPU‐RGO/ATP‐Fe₃O₄/CS composites were improved. When the content of RGO/ATP‐Fe₃O₄/CS was 8 wt%, the electrical conductivity and the saturation magnetic strength of WPU‐RGO/ATP‐Fe₃O₄/CS composites were 3.1 × 10^?7 S·cm^?1 and 1.38 emu/g, respectively. WPU‐RGO/ATP‐Fe₃O₄/CS composites have excellent electrical and magnetic properties.     

Electrical Conductivity of Alkaline-reduced Graphene Oxide

A green route using a very simple and straightforward ultrasonic process under alkaline conditions, rather than a general chemical reduction process using hydrazine, was utilized to obtain the hydrophilic reduced graphene oxide(RGO) sheets, via removing oxygen functional groups from graphene oxide(GO) and repairing the aromatic structure. It is found that the conductivity of the obtained RGO could be tuned by changing pH value in alkaline solution, and the current-voltage(I-V) curves of both GO and RGO are nonlinear and slightly asymmetric. Under the same applied voltage, the current of RGO is much larger than that of GO, indicating a pronounced increase in the electrical conductivity of RGO, compared to that of GO.     

Preparation of porous polyimide/in‐situ reduced graphene oxide composite films for electromagnetic interference shielding

Herein we report an easy and efficient approach to prepare lightweight porous polyimide (PI)/reduced graphene oxide (RGO) composite films. First, porous poly (amic acid) (PAA)/graphene oxide (GO) composite films were prepared via non‐solvent induced phase separation (NIPS) process. Afterwards PAA was converted into PI through thermal imidization and simultaneously GO dispersed in PAA matrix was in situ thermally reduced to RGO. The GO undergoing the same thermal treatment process as thermal imidization was characterized with thermogravimetric analysis, Raman spectra, X‐ray photoelectron spectroscopy and X‐ray diffraction to demonstrate that GO was in situ reduced during thermal imidization process. The resultant porous PI/RGO composite film (500‐µm thickness), which was prepared from pristine PAA/GO composite with 8 wt% GO, exhibited effective electrical conductivity of 0.015 S m^?1 and excellent specific shielding efficiency value of 693 dB cm² g^?1. In addition, the thermal stability of the porous PI/RGO composite films was also dramatically enhanced. Compared with that of porous PI film, the 5% weight loss temperature of the composite film mentioned above was improved from 525°C to 538°C. Moreover, tensile test showed that the composite film mentioned above possessed a tensile strength of 6.97 MPa and Young's modulus of 545 MPa, respectively. Copyright © 2016 John Wiley & Sons, Ltd.     

Improvement of ammonia sensing properties of polypyrrole by nanocomposite with graphitic materials

The more sensitive and rapid ammonia gas sensors were prepared with nanocomposites of polypyrrole (PPy) and graphitic materials such as graphite, graphite oxide (GO), and reduced graphene oxide (RGO). Pyrrole was polymerized uniformly on the surface of graphitic materials by in situ polymerization method. The structures of nanocomposites were studied by scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy indicating the well-exfoliated GO and RGO in PPy matrix with favorable interfacial interaction. PPy/RGO nanocomposite showed the highly improved response in detecting ammonia gas mainly due to the effective electron charge transfer between PPy and ammonia and the efficient transfer of electrical resistance variation by the uniformly dispersed conductive RGO in PPy. PPy/RGO nanocomposite gas sensor also showed the excellent reproducibility in ammonia sensing behavior during the recovery process at lower temperature of 373 K.     

Polymerization of graphene oxide nanosheet by using of aminoclay: Electrocatalytic activity of its platinum nanohybrids

This study describes the polymerization of graphene oxide (GO) nanosheet to reduced‐GO‐aminoclay (RGC) by covalent functionalization of chemically reactive epoxy groups on the basal planes of GO with amine groups of magnesium phyllosilicate clay (known as aminoclay). The resulting RGC sheets were characterized and applied to support platinum nanostructures at toluene/water interface. Pt nanoparticles (NPs) with diameters about several nanometers were adhered to RGC sheets by chemical reduction of [PtCl₂(cod)] (cod = cis,cis‐1,5‐cyclooctadiene) complex. Catalytic activity of Pt NPs thin films were investigated in the methanol oxidation reaction. Cyclic voltammetry results exhibit that the Pt/reduced‐GO (RGO) and Pt/RGC thin films showed improved catalytic activity in methanol oxidation reaction in comparison to other Pt NPs thin films, demonstrating that the prepared Pt/RGO and Pt/RGC thin films are promising catalysts for direct methanol fuel cell.     

Synthesis and characterization of polypyrrole/graphite oxide composite by in situ emulsion polymerization

This work demonstrates a feasible route to synthesize the layered polypyrrole/graphite oxide (PPy/GO) composite by in situ emulsion polymerization in the presence of cationic surfactant cetyltrimethylammonium bromide (CTAB) as emulsifier. AFM and XRD results reveal that the GO can be delaminated into nanosheets and well dispersed in aqueous solution in the presence of CTAB. The PPy nanowires are formed due to the presence of the lamellar mesostructured (CTA)₂S₂O₈ as a template. The results of the PPy/GO composite indicate the PPy insert successfully into GO interlayers, and the nanofiber‐like PPy are deposited onto the GO surface. Owing to π–π electron stacking effect between the pyrrole ring of PPy and the unoxided domain of GO sheets, the electrical conductivity of PPy/GO composite (5 S/cm) significantly improves in comparison with pure PPy nanowires (0.94 S/cm) and pristine GO (1 × 10^?6 S/cm). © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1329–1335, 2010     

Synthesis of polydopamine‐coated graphene–polymer nanocomposites via RAFT polymerization

Graphene‐polymer nanocomposites have significant potential in many applications such as photovoltaic devices, fuel cells, and sensors. Functionalization of graphene is an essential step in the synthesis of uniformly distributed graphene‐polymer nanocomposites, but often results in structural defects in the graphitic sp² carbon framework. To address this issue, we synthesized graphene oxide (GO) by oxidative exfoliation of graphite and then reduced it into graphene via self‐polymerization of dopamine (DA). The simultaneous reduction of GO into graphene, and polymerization and coating of polydopamine (PDA) on the reduced graphene oxide (RGO) surface were confirmed with XRD, UV–Vis, XPS, Raman, TGA, and FTIR. The degree of reduction of GO increased with increasing DA/GO ratio from 1/4 to 4/1 and/or with increasing temperature from room temperature to 60 °C. A RAFT agent, 2‐(dodecylthiocarbonothioylthio)?2‐methylpropionic acid, was linked onto the surface of the PDA/RGO, with a higher equivalence of RAFT agent in the reaction leading to a higher concentration of RAFT sites on the surface. Graphene‐poly(methyl methacrylate), graphene‐poly(tert‐butyl acrylate), and graphene‐poly(N‐isopropylacrylamide) nanocomposites were synthesized via RAFT polymerization, showing their characteristic solubility in several different solvents. This novel synthetic route was found facile and can be readily used for the rational design of graphene‐polymer nanocomposites, promoting their applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3941–3949     

Nanostructure Restoration of Thermally Reduced Graphene Oxide Electrode upon Incorporation of Nafion for Detection of Trace Heavy Metals in Aqueous Solution

High performance reduced graphene oxide (RGO)‐Nafion (N) thin film electrodes coated on silicon (Si) substrates (RGO‐N/Si) were successfully developed through thermal reduction of GO‐N without delamination from the substrates. The restoration of the RGO‐N nanostructure upon the addition of Nafion was proven by Raman spectroscopy (RS) and field emission scanning electron microscopy, and the restoration mechanism of the RGO‐N nanostructure was proposed. Through the investigation using x‐ray photoelectron spectroscopy (XPS), the polyfluorocarbon from Nafion possessed a function that could prevent the delamination of the RGO sheets from the substrates during the thermal reduction. The RGO‐N/Si samples were later used for the determination of trace heavy metals, such as divalent lead, cadmium and copper ions (Pb²⁺, Cd²⁺ and Cu²⁺, respectively) using square wave anodic stripping voltammetry in a 0.1 M acetate buffer solution (pH 5). Based on the electroanalytical measurements, the RGO‐N/Si samples exhibited a highly linear behavior in the detection of Cd²⁺, Pb²⁺ and Cu²⁺ over the concentration range of 50 nM to 300 nM with detection limits at nM levels. In addition, the RGO‐N/Si samples presented good recoveries of target metals in tap water samples.     

Dispersion of Reduced Graphene Oxide in Multiple Solvents with an Imidazolium‐Modified Hexa‐peri‐hexabenzocoronene

An imidazolium‐modified hexa‐peri‐hexabenzocoronene derivative (HBC‐C₁₁‐MIM[Cl^?]) was designed and synthesized as a stabilizer to fabricate reduced graphene oxide (RGO). The resulting RGO/HBC‐C₁₁‐MIM[Cl^?] hybrid shows excellent dispersivity (5.0 mg mL^?1) and stability in water. RGO/HBC‐C₁₁‐MIM[Cl^?] was comprehensively characterized by using atomic force microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, thermogravimetric analysis, and Raman spectroscopy, thus revealing that one HBC‐C₁₁‐MIM[Cl^?] group can stabilize about 178 carbon atoms on the graphene sheets. The obtained hybrid film exhibits a high conductivity of 286 S m^?1. Furthermore, the HBC‐C₁₁‐MIM[Cl^?]‐modified RGO sheets can be readily dispersed in polar organic solvents upon exchange of the hydrophilic Cl^? ions for hydrophobic bis(trifluoromethylsulfonyl) amide (NTf₂^?) ions.     

水溶液体系中氧化石墨烯的γ射线辐射还原

石墨烯是一种碳原子以二维蜂窝状晶格结构构成的单片层材料,由于其具有优异的电传导性、力学性能和热传导性近年来受到广泛关注.本文采用γ射线辐射技术分别处理水溶液和对苯二胺(PPD)水溶液中的氧化石墨烯(GO),得到辐照还原氧化石墨烯(RGO)和胺基化修饰的还原氧化石墨烯(RGON).通过傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、拉曼(Raman)光谱、X射线衍射(XRD)和热失重分析(TGA)等表征分析产物的化学结构和元素组成;通过四探针测试仪和接触角测量仪研究产物的导电性能和亲水性.实验结果表明,在水溶液及PPD水溶液中γ射线辐射均可高效还原GO,还原后得到的RGO和RGON电导率均显著增大.PPD的胺基在辐射还原过程中还可以修饰到石墨烯的表面,因此RGON的亲水性比RGO好,但胺基的存在会干扰石墨烯表面π电子的传导,导致其电导率下降.     

Synthesis of adenine-modified reduced graphene oxide nanosheets

We report here a facile strategy to synthesize the nanocomposite of adenine-modified reduced graphene oxide (AMG) via reaction between adenine and GOCl which is generated from SOCl(2) reacted with graphite oxide (GO). The as-synthesized AMG was characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), UV-vis absorption spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and galvanostatic discharge analysis. The AMG owns about one adenine group per 53 carbon atoms on a graphene sheet, which improves electronic conductivity compared with reduced graphene oxide (RGO). The AMG displays enhanced supercapacitor performance compared with RGO accompanying good stability and good cycling behavior in the supercapacitor.     

Reduced Graphene Oxide/Poly(3‐hexylthiophene) Supramolecular Composites

Poly(3‐hexylthiophene) (P3HT) supramolecular structures are fabricated on P3HT‐dispersed reduced graphene oxide (RGO) monolayers and surfactant‐free RGO monolayers. P3HT is able to disperse RGO in hot anisole/N,N‐dimethylformamide solvents, and forms nanowires on RGO surfaces through a RGO induced crystallization process. The TEM and AFM investigation of the resultant P3HT/RGO composites shows that P3HT nanowires grow from RGO, and connect individual RGO monolayers. Raman spectroscopy confirms the interaction between P3HT and RGO, which allows the manipulation of the RGO electrical properties. Such a bottom‐up approach provides interesting graphene‐based composites for nanometer‐scale electronics.

     

An Effective Method for Bulk Obtaining Graphene Oxide Solids

We report an effective method for bulk obtaining exfoliated graphene oxide (GO) solids from their aqueous solutions, which were prepared from nature graphite by an oxidation method. Tyndall effect proved that GO solution has a colloidal nature. Different flocculants were used to coagulate GO colloidal, and it was found that NaOH had the most obvious coagulation effect to GO. Transmission electron microscopy, X‐ray diffraction and atomic force microscopy analysis demonstrated that there were a large number of complete few‐layer GO sheets with thickness of about 0.8 nm, and the surfaces were very smooth, almost free of impurities. Liquid state ¹³C NMR and Fourier transformation infrared spectra showed the presence of abundant benzene carboxylic, hydroxyl and epoxide groups in the basal planes of GO. The graphene materials reduced from GO solids had good electrical conductivity. Our work explored a simple and effective route to extract GO from their solution, which is the most important to GO and graphene researches and applications.     

Localized Plasmon‐Stimulated Nanochemistry of Graphene Oxide on a SERS Substrate

In recent years, there has been remarkable progress in the reduction and functionalization of graphene oxide (GO) using nanoparticles and high‐energy optical photons. Most of these reactions are carried out in solutions, whereas the local modification of GO on solid substrates still remains a challenge. In this work, we demonstrate the local reduction of GO and its further destruction, leading to the synthesis of polyaromatic hydrocarbons (PAHs) stimulated by localized surface plasmons (LSPs). The reduction of GO and the synthesis of PAHs have been carried out on a substrate designed for surface‐enhanced Raman spectroscopy (SERS). We found that LSPs initiate the destruction of water molecules entrapped in the nanogaps between silver nanoparticles after the deposition of GO from the aqueous suspension. It was demonstrated that OH radicals, as a result of water decomposition, initiate the reduction of GO, leading to the synthesis of PAHs. The reactions have been observed in real time by using SERS. The measurement of current–voltage (I–V) characteristics through conductive atomic force microscopy (AFM), recorded in an LSP‐stimulated area, have shown the increased electrical conductivity (more than ten times) compared with the conductivity of GO. The synthesis of new compounds in the LSP‐stimulated area has been confirmed by the appearance of new peaks in the Raman spectra and nonlinear I–V characteristics typical for PAHs. We show that the used method allows the local modification of electrical properties of GO and controlled nanopattering of organic compounds on the surface.     

The Formation of Large‐Area Conducting Graphene‐Like Platelets

The treatment of a suspension of graphite oxide (GO) with sodium azide leads to a material that, after reduction, features amino groups at the top and bottom of the sheets. These groups react through microcontact printing with an isothiocyanate monolayer on a silicon oxide substrate to form covalent bonds that strongly attach to the particles on the surface. With ultrasonication it is possible to obtain exfoliation of the sheets that are not covalently bound to the surface leaving single‐layer platelets attached to the substrate. The azido derivative can be also used to functionalize the graphene oxide with long alkylic chains through a click chemistry approach. This functionalization results in the exfoliation of this material in dimethylformamide. The novel materials were fully characterized by different techniques including IR spectroscopy, thermogravimetric analysis (TGA), scanning and transmission electron microscopy (SEM and TEM), X‐Ray photoelectron spectroscopy (XPS), and solid state NMR spectroscopy. The material with amino groups, after the reduction step, is conductive with a resistivity only approximately seven times larger than that of unprocessed graphite. This implies that after reduction of the GO, the conjugated sp² network is largely restored. We consider this to be an important step towards a chemical approach for forming conducting large‐area platelet films of single‐layer graphene.     

The Role of Interphase Interactions in Electrosynthesis of Composites Based of Graphene Oxide and Poly-<Emphasis Type="Italic">o</Emphasis>-Phenylenediamine

The formation of the composite of reduced graphene oxide (RGO) with poly-o-phenylenediamine (PPD) on the surface of SnO₂-coated conducting glasses (CG) is studied by the methods of voltammetry, atomic force microscopy (AFM), electron microscopy (SEM) with energy-dispersive X-ray spectroscopic (EDXS) microanalysis, and electron spectroscopy, When a CG with deposited graphene oxide is placed into aqueous solution of o-phenylenediamine (OPD), the monomer is strongly fixed in the GO matrix, as confirmed by EDXS data. The further redox interaction in the two-phase system GO–OPD initiates polymerization of OPD in the GO film. When anodic polarization in switched on, the oxidation and the further polymerization of OPD go on, while GO is reduced to RGO as a result of mediated reaction to yield the RGO–PPD composite even in the absence of cathodic polarization. The electron spectra of composites reveal the presence of an absorption band close to absorption of individual PPD. According to AFM and SEM data, OPD incorporated into the composite structure keeps RGO from being folded in acidic media. As the time of impregnation increases, the degree of reduction of GO to RGO changes, which is reflected in the surface morphology and the amount of monomer in the composite (RGO–PPD)-1. The coating becomes black, which is typical of RGO, and its conductivity increases by 4–5 orders of magnitude.     

One-step synthesis of Pt nanoparticles/reduced graphene oxide composite with enhanced electrochemical catalytic activity

A one-step electrochemical approach for synthesis of Pt nanoparticles/reduced graphene oxide(Pt/RGO) was demonstrated.Graphene oxide(GO) and chloroplatinic acid were reduced to RGO and Pt nanoparticles(Pt NPs) simultaneously,and Pt/RGO composite was deposited on the fluorine doped SnO 2 glass during the electrochemical reduction.The Pt/RGO composite was characterized by field emission-scanning electron microscopy,Raman spectroscopy and X-ray photoelectron spectroscopy,which confirmed the reduction of GO and chloroplatinic acid and the formation of Pt/RGO composite.In comparison with Pt NPs and RGO electrodes obtained by the same method,results of cyclic voltammetry and electrochemical impedance spectroscopy measurements showed that the composite electrode had higher catalytic activity and charge transfer rate.In addition,the composite electrode had proved to have better performance in DSSCs than the Pt NPs electrode,which showed the potential application in energy conversion.     

LDPE/EVA/graphene nanocomposites with enhanced mechanical and gas permeability properties

In the present work, graphene oxide (GO) and reduced graphene oxide (RGO) were incorporated at low‐density polyethylene (LDPE)/ethylene vinyl acetate (EVA) copolymer blend using solution casting method. Monolayer GO with 1‐nm thickness and good transparency was synthesized using the well‐known Hummers's method. Fourier transform infrared and X‐ray photoelectron spectroscopy data exhibited efficient reduction of GO with almost high C/O ratio of RGO. Scanning electron microscopy showed the well distribution of GO and RGO within LDPE/EVA polymer matrix. The integrating effects of GO and RGO on mechanical and gas permeability of prepared films were examined. Young's modulus of nanocomposites are improved 65% and 92% by adding 7 wt% of GO and RGO, respectively. The tensile measurements showed that maximum tensile strength emerged in 3 wt% of loading for RGO and 5 wt% for GO. The measured oxygen and carbon dioxide permeability represented noticeably the attenuation of gas permeability in composite films compared with pristine LDPE/EVA blend. Copyright © 2015 John Wiley & Sons, Ltd.     

氮掺杂还原氧化石墨烯负载铂催化剂的制备及甲醇电氧化性能

采用高温热解聚苯胺修饰的氧化石墨烯（PANI-GO）,得到了氮掺杂的还原氧化石墨烯碳材料（N-RGO）,以其负载Pt 制备了Pt/N-RGO纳米结构电催化剂. 采用透射电镜（TEM）、X射线光电子能谱（XPS）、X 射线衍射（XRD）谱及拉曼光谱等技术对N-RGO和Pt/N-RGO的形貌及结构进行了表征,用循环伏安、计时电流等电化学技术研究了Pt/N-RGO电极催化剂对CO溶出反应和甲醇电氧化反应的催化性能. 结果表明：高温热解PANIGO可同时实现GO的还原及其氮掺杂的过程,氮掺杂引起还原氧化石墨烯碳材料表面缺陷结构和导电性的增加;与相应的未掺杂氮样品Pt/RGO相比较,Pt/N-RGO样品上Pt 颗粒的分散更均匀,显示出更强的抗CO毒化能力和更高的甲醇电氧化催化活性及稳定性.