“A-C≡C-TTF-C≡C-A”型四硫富瓦烯衍生物的合成与性质研究

四硫富瓦烯及其衍生物是性能优良的电子给体.本文利用Sonogashira反应将吡啶基团连接在四硫富瓦烯单元上,合成了"A-C≡C-TTF-C≡C-A"型四硫富瓦烯共轭体系衍生物4,4′(5′)-二-(4-吡啶乙炔基)-四硫富瓦烯(TTF4N).吸收光谱、电化学和Pb2+配位键合研究表明,三键作为桥基能够有效实现分子内的电荷转移.金属Pb2+离子与吡啶基团的配位能够引起TTF4N的吸收光谱、核磁氢谱和电化学性质的显著变化.     

双（亚烷二硫基)四硫富瓦烯衍生物的合成及其电化学性质

以四(氰乙硫基)四硫富瓦烯为原料经醇钠消去氰乙基生成四硫富瓦烯四硫盐， 再与二元卤代烷烃化反应，除了得到三种文献报道的双(亚烷二硫基)四硫富瓦烯衍 生物外，还得到三种新的“四桥”双—四硫富瓦烯衍生物，为“桥式”双—四硫富 瓦烯衍生物的合成提出了一种新的方法．并研究了它们的循环伏安图、电化学性质 和紫外—可见光光谱．     

不对称四硫富瓦烯衍生物合成新方法及其电化学性质的研究

以2,3－二（2′－氰乙硫基）－6,7－亚烷硫基四硫富瓦烯为原料,在醇钠的作用下消去氰乙基生成的二元硫负离子与对－二（氯甲基）苯反应除了生成两种新的不对称四硫富瓦烯衍生物外,还得到两种新的“二桥”－双四硫富瓦烯衍生物,为四硫富瓦烯衍生物的合成提供了一种新的方法。并对不对称四硫富瓦烯衍生物和“二桥”－双四硫富瓦烯衍生物的循环伏安图、电化学性质和UV－Vis光谱进行了研究。     

富勒烯C60硫桥键联四硫富瓦烯衍生物的理论研究

利用半经验AM1法研究了富勒烯C₆₀硫桥键联四硫富瓦烯衍生物和富勒烯C₆₀键联四硫富瓦烯衍生物的几何构型,电子结构.计算结果显示,富勒烯C₆₀硫桥键联四硫富瓦烯衍生物的四硫富瓦烯(TTF)平面与C₆₀发生作用,使其弯曲的程度比富勒烯C₆₀键联四硫富瓦烯衍生物的大,从而形成一种独特的四硫富瓦烯(TTF)平面半包裹C₆₀的空间构型的D-A体系.这很可能是由于C-S单键的灵活性造成的.而且它们的HOMO轨道主要分布在四硫富瓦烯(TTF)部分,而LUMO轨道则主要分布在C₆₀上.预测了富勒烯C₆₀硫桥键联四硫富瓦烯衍生物很有可能在激发态下产生更长寿命的电荷分离态.     

新型三(四硫富瓦烯)环蕃的合成和性质

利用四(3'-碘丙硫基)四硫富瓦烯和四硫富瓦烯二钠盐反应合成新的三(四硫富瓦烯)环蕃, 并通过循环伏安法和化学氧化法分别对其氧化还原性质和紫外光谱进行了研究.     

新型I型五聚四硫富瓦烯衍生物的合成和性质

利用2,3-二(2'-氰乙基硫基)-6,7-二烷硫基四硫富瓦烯在甲醇钠的作用下消除一个保护基团生成四硫富瓦烯单钠盐,与1,4-二(氯甲基)苯反应,形成单桥-双(四硫富瓦烯)衍生物,生成的单桥-双(四硫富瓦烯)衍生物再次在甲醇钠的作用下消除剩下的保护基团,形成单桥-双(四硫富瓦烯)衍生物二钠盐,最后与四(3'-碘丙硫基)四硫富瓦烯反应形成新型I型五聚TTF衍生物,并通过循环伏安法和化学氧化法分别对其氧化还原性质和紫外光谱进行了研究.     

新型I型五聚四硫富瓦烯衍生物的合成和性质

利用2,3-二(2'-氰乙基硫基)-6,7-二烷硫基四硫富瓦烯在甲醇钠的作用下消除一个保护基团生成四硫富瓦烯单钠盐,与1,4-二(氯甲基)苯反应, 形成单桥-双(四硫富瓦烯)衍生物, 生成的单桥-双(四硫富瓦烯)衍生物再次在甲醇钠的作用下消除剩下的保护基团, 形成单桥-双(四硫富瓦烯)衍生物二钠盐, 最后与四(3'-碘丙硫基)四硫富瓦烯反应形成新型I型五聚TTF衍生物, 并通过循环伏安法和化学氧化法分别对其氧化还原性质和紫外光谱进行了研究.     

一类新型有机给体四硫代富瓦烯插烯物的合成与研究进展

概括了一类新型的有机电子给体－四硫代富瓦烯插烯物的合成方法，讨论了给体的循环伏安特性，并对其电荷转移复合物及自由基基阳离子盐的研究进展进行了简要的评述，参考文献４５篇。     

新型四四硫富瓦烯环蕃的合成和性质

利用2,3-二(2-氰基乙硫基)-6,7-二烷硫基四硫富瓦烯在甲醇钠的作用下消除一个保护基团生成四硫富瓦烯单钠盐, 与1,4-二氯甲基苯反应, 形成“单桥”-双(四硫富瓦烯)衍生物, 生成的“单桥”-双(四硫富瓦烯)衍生物再次在甲醇钠的作用下消除剩下的保护基团, 形成“单桥”-双(四硫富瓦烯)衍生物二钠盐, 最后与二溴代烷反应形成新型四四硫富瓦烯环蕃, 并通过循环伏安法和化学氧化法分别对其氧化还原性质和紫外光谱进行了研究.     

新型四硫代富瓦烯衍生物的合成及其性质的研究

合成了3个新的含有卤素取代基的四硫代富瓦烯衍生物及6个新的相关化合物。利用溶液的电子吸收光谱对四硫代富瓦烯衍生物的性质进行了研究。研究结果表明, 四硫代富瓦烯衍生物的分子中π轨道之间的能级差较小, 因而分子具有较高的稳定性。     

非邻苯二甲酸酯内给电子体聚丙烯催化剂的研究进展

本文综述了非邻苯二甲酸酯类内给电子体催化剂的研究进展,对目前已处于工业化应用的3种非邻苯二甲酸酯类化合物催化剂的性能特点进行了详细对比.针对日趋严格的清洁型聚丙烯要求,展望了非邻苯二甲酸酯类给电子体化合物以及相关催化剂的发展前景.     

External Donor Induced Direct Contact Effects on Mg(OC2H5)2-Based Ziegler-Natta Catalysts for Propylene Polymerization

Effects of external donor induced direct contact without alkylaluminum were studied for Ziegler-Natta catalysts containing monoester and diester as internal donors on the catalytic performances such as activity and stereoselectivity. Traditional slurry polymerizations were carried out for rather short period after direct contact for a variety of time. GC analysis was also performed to observe replacement phenomena of donors during direct contact. It was postulated that the different performances of the catalysts were greatly affected by the pair of internal and external donors.     

Multiple Multidentate Halogen Bonding in Solution,in the Solid State,and in the (Calculated) Gas Phase

The binding properties of neutral halogen‐bond donors (XB donors) bearing two multidentate Lewis acidic motifs toward halides were investigated. Employing polyfluorinated and polyiodinated terphenyl and quaterphenyl derivatives as anion receptors, we obtained X‐ray crystallographic data of the adducts of three structurally related XB donors with tetraalkylammonium chloride, bromide, and iodide. The stability of these XB complexes in solution was determined by isothermal titration calorimetry (ITC), and the results were compared to X‐ray analyses as well as to calculated binding patterns in the gas phase. Density functional theory (DFT) calculations on the gas‐phase complexes indicated that the experimentally observed distortion of the XB donors during multiple multidentate binding can be reproduced in 1:1 complexes with halides, whereas adducts with two halides show a symmetric binding pattern in the gas phase that is markedly different from the solid state structures. Overall, this study demonstrates the limitations in the transferability of binding data between solid state, solution, and gas phase in the study of complex multidentate XB donors.     

Protecting group free glycosidations using p-toluenesulfonohydrazide donors

N'-Glycopyranosylsulfonohydrazides are introduced as glycosyl donors for protecting group free synthesis of O-glycosides, glycosyl azides, and oxazolines. Mono- and disaccharides containing a reducing terminal N-acetylglucosamine residue were condensed with p-toluenesulfonylhydrazide to give the desired beta- d-pyranose donors. These donors can be activated with NBS and then glycosidated with the desired alcohol or transformed to the oxazoline or glycosyl azide.     

给电子体在丙烯聚合MgCl2载体催化剂体系中的作用

制备了3种含有不同内给电子体(邻苯二甲酸二异丁酯,9,9-二甲氧基甲基-芴和1,1-双甲氧基甲基-环丁烷)的MgCl2负载型丙烯聚合齐格勒-纳塔(Z-N)催化剂,研究了给电子体结构与聚合性能之间的关系,用红外光谱剖析了催化剂及其相关化合物的结构,结果发现催化剂中的内给电子体直接与MgCl2配位,而没有与TiCl4结合.内给电子体的加入,降低了Z-N催化剂中钛的含量,提高催化丙烯聚合的活性,使聚合物的分子量分布变窄.聚合物立构规整度的变化强烈依赖于内给电子体的结构.     

Charge‐transfer piperazine‐containing polymeric systems via ring‐opening metathesis polymerization

This article describes the synthesis of piperazine‐containing homopolymer systems via ring‐opening metathesis polymerization (ROMP). These systems were subsequently used as electron donors in the formation of charge‐transfer (CT) complexes. Using exo‐N‐(6‐bromohexyl)‐7‐oxabicyclo[2.2.1]hept‐5‐ene‐2,3‐dicarboxamide as a starting material, monomers were synthesized to act as electron donors. The amine group at the “open” end of the piperazine was either left open or alkylated with various alkyl groups. The monomers' ability to act as electron donors and their polymerization rates were studied. After initial photometric titration studies using 2,3‐dichloro‐5,6‐dicyanobenzoquinone (DDQ) as an electron acceptor proved that these monomers would act as electron donors, they were subsequently polymerized into homopolymers via ROMP. The experimental results showed that a methanol:chloroform mixed solvent system enhanced the rate of polymerization over a single solvent (chloroform) system. Studies also showed that the alkylated piperazine‐containing monomer had a faster rate of polymerization than the secondary piperazine monomer. These monomers were used to make piperazine‐containing homopolymers via ROMP and the resulting polymers, like the monomers, also functioned as electron donors. Potential functions of these polymers include electronics, solar cells, optical systems, and biological applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5034–5043, 2009     

Synthesis and Electrochemical Studies on BEDT-TTF Derivatives with Hydroxyl Groups

Since the finding of organic conductor in 1973 and organic superconductor in 1980, great progress has been achieved1 in the field of organic conductors and superconductors. Much effort is still being devoted to this field, and several significant results have been obtained by subtle modifications of BEDT-TTF, such as, the substitution of peripheral sulfur atoms with selenium ( BETS )2 and oxygen ( BEDO)3atoms, the extra-substitution with hydroxyl , amide, pyridine groups4 etc., all of the…     

Stereoselective synthesis of 2-deoxy-beta-galactosides via 2-deoxy-2-bromo- and 2-deoxy-2-iodo-galactopyranosyl donors

[reaction: see text] A series of 2-bromo- and 2-iodo-galactopyranosyl acetates and trichloroacetimidates were evaluated as glycosyl donors for the synthesis of 2-deoxygalactopyranosides. The best selectivity for the beta-glycosidic linkage was achieved by using 6-deoxy-3,4-carbonate-protected galactosyl donors.     

Comparison of the role of new ethers and conventional alkoxysilanes as external donors in the polymerization of propylene using the industrial Ziegler-Natta catalyst

Two new ethers were synthesized using the Williamson reaction from related alcohols and were used as external donors in propylene polymerization in the presence of the industrial diisobutyl phthalate-based MgCl₂-supported Ziegler-Natta catalyst. For comparison the propylene polymerization was carried out in the presence of silane and in the absence of external donors. The produced polymers were characterized by differential scanning calorimetry, xylene extraction, melt flow index, scanning electron microscopy and gel permeation chromatography. The isotacticity, molecular weight and molecular weight distribution, melt flow index, crystallinity degree and thermal properties of polypropylenes were influenced by the type of external donors.