有限入射声束在液固界面声反射的数值研究

采用将有限声束分解为一系列平面波的方法，对液固界面声束的声反射问题进行了数值研究，结果表明，当声束入射角为瑞利疲激角时，反射声速有明显位移；当声束在液固界面“掠射”时，反射声速显著变宽，文中还讨论了束宽对反射声速横截面上声场分布的影响。     

固体滑移界面的超声评价

为评价固体滑移界面的特性,根据QSM界面模型和粘滞流体的本构方程导出了滑移界面的界面劲度系数及垂直入射到固体滑移界面的超声纵波和SH波的反射系数公式,其中纵波的反射系数与滑移界面层的绝热体积弹性模量、粘滞系数和入射声波的频率有关,而SH波的反射系数与界面层的绝热体积弹性模量和入射波的频率无关。因此,可以用SH波直接评价界面的不同粘滞状态,且不受检测频率的限制。要评价界面的绝热体积弹性模量,则必须增加纵波检测。利用蜂蜜和水模拟不同滑移界面层的声波反射实验验证了上述理论结果。     

双相多孔锂离子电池液/固界面的声反射与声透射

采用传递矩阵法,同步联立改进的Biot理论,对含液固界面的双相多孔锂离子电池的超声反射与透射系数进行理论求解。考虑锂离子的摇摆特性对电极力学性能的影响,计算了对应状态下液/固界面的双相多孔锂离子电池声反射及透射系数的角度谱与频率谱。同时,构建了不同荷电状态时含单元锂离子电池的频域仿真模型,以萃取对应的超声反射及透射角度谱及频率谱,并与理论计算结果对比吻合良好。随后,以多单元锂离子电池为例,在不同的荷电状态下,分析了反射与透射系数随斜入射角度、入射波频率的变化关系,并分别指出了其角度谱及频率谱特征点随荷电状态的变化特征,为锂离子电池运行状态的超声无损测量提供了理论基础。     

弹性波斜入射声子晶体的缺陷模及其转型

推导出弹性波斜入射固-固掺杂结构声子晶体的转移矩阵和透射系数公式.计算固-固掺杂结构声子晶体中弹性波的透射系数.得到当横波斜入射时,透射波中横波的缺陷模随着入射角的增大而减弱,横波向纵波的转型随着入射角的增大而增强.当纵波斜入射时,透射波中纵波的缺陷模随着入射角的增大而减弱,纵波向横波的转型随着入射角的增大而增强.     

具有刚性联接界面和滑移界面的层状固体媒质的声反射

利用矩阵方法,本文提出了声波从具有刚性联接和滑移界面的层状固体媒质反射特性的一般模型,导出了包含一个或两个滑移界面的层状固体媒质纵波和横波声反射系数解析表达式。文中还给出一些典型粘接件声反射系数的数值计算结果,为正确选择超声评价这些界面特性所采用的技术参数提供了依据。     

凹面相控阵聚焦声场在液固界面上的反射和折射

开展了凹面线性相控阵列辐射声场在液固界面上的反射和折射特性研究,利用射线近似方法,得到了凹面相控阵聚焦声场在液固界面上反射和折射后的声场渐近解析表达式,对声波在液固曲面上的反射和折射声场进行了分析和讨论. 利用这个解析表达式,对凹面线性聚焦声场在液固平界面和液固圆柱界面情况下固体中折射纵波和折射横波的相控阵声场进行了分析和讨论,发现凹面线阵声场在液固圆柱界面下比液固平界面具有更好的聚焦效果. 关键词： 凹面阵列 超声相控阵 反射与折射     

基于不同粗糙度表面反射的液晶屏显示 信息泄漏研究

针对不同粗糙度表面反射光泄漏问题,对Torrance-Sparrow模型进行修正,建立了双向反射分布函数数学模型,数值计算了影响双向反射分布函数的各个因素,通过实验对建立的数学模型和数值计算结果进行了验证.结果表明:影响反射信息的主要因素有镜面反射,漫反射和介质的吸收,镜面反射包括反射面反射率、反射面上微面元倾斜角概率分布函数、入射光入射到反射面的微面元入射角和反射角引起的遮蔽因子,其中,主要影响因素是镜面反射;若选定入射角和粗糙度,随着反射角从0到π/2变化,反射面双向反射分布函数是以镜面反射角为均值的高斯分布,当反射角大于1.4rad,反射面双向反射分布函数值急剧增加,高斯分布发生变形;若选定镜面反射角方向接收反射信息,随着反射面粗糙度的增加,反射面双向反射分布函数值单调下降,且变化较快;当粗糙度大于0.3时,双向反射分布函数接近0.     

正交各向异性板液/固界面的声反射与声透射

采用Legendre正交多项式法,对液/固界面声波反射和透射系数进行求解。利用Legendre正交多项式对正交各向异性板中的位移解进行展开,推导出板中的应力和波动控制方程。联立液/固界面的边界条件和波动控制方程,建立线性无关方程组,用以计算液/固界面的反射和透射系数及Legendre多项式的展开系数,计算所得铝板液/固界面的反射和透射系数与传递矩阵法的计算结果吻合良好。以单向纤维增强复合材料板为例,在不同的方位角下,分析了反射和透射系数随斜入射角度、入射波频率的变化关系,以及板中声场的位移分布。所取Legendre正交多项式截止阶数越大,可用来计算的频厚积范围越大。研究拓展了Legendre正交多项式法的适用范围,为材料力学性能的声学测量提供了理论基础。      

斜入射激光超声体波声场的实验研究

为研究微烧蚀状态下圆形光斑斜入射时激光超声声场的指向性,使用脉冲激光辐照半圆柱形铝质工件表面,并使用压电探头和电磁超声探头分别接收纵波和横波信号。根据速度参数确定了超声信号的类型,提取了信号的峰-峰值,并绘制出声场指向性曲线。通过分析获得以下结论:激光斜入射角度在0~60°范围内变化时,纵波声场的声束轴线方向保持不变,且与工件内法线平行;另外,横波声场的峰-峰值仍然在±35°的方向上取最大值,但是横波指向图形的主瓣易受激光入射方向的影响,当倾斜角度大于等于45°时,横波主瓣的范围变得较宽。     

P波入射下固固界面的二阶谐波场特性

应用二阶势理论研究了P波入射到固-固界面情况下的二阶谐波场。运用变动参数法求解二阶非齐次势函数方程的边值问题,数值计算了二阶谐波位移与入射角的关系,结果表明当入射角到达某个角度时,二阶谐波场的位移会急剧增大。同时,当入射角度为θ_w时,特解位移趋近无限大的有关现象依然出现,关于边界面的影响也做了讨论。      

Acousto-optic study of the unusual cases of reflection of bulk elastic waves in a paratellurite crystal

The propagation and reflection of bulk ultrasonic waves in a paratellurite crystal have been investigated by the acousto-optic method. Simultaneous excitation of two acoustic waves by one piezoelectric transducer has been observed in a cell of complex, specially chosen configuration. Maximally efficient conversion of the energy of a quasi-longitudinal wave into a single reflected quasi-shear wave with a walkoff angle 72° is implemented for the reflection from a free crystal boundary. The wave beam compression by a factor of 7 is observed for this reflection. A reflection (close to backward) of waves with an angle of spatial separation of the incident and reflected beams equal to 8° is also implemented. The acousto-optic figure of merit values of the medium are calculated for arbitrary propagation and polarization directions of the interacting light and ultrasonic waves. Possible applications of the effects studied in acousto-optics and acoustoelectronics are indicated.     

Harmonic generation of an obliquely incident ultrasonic wave in solid-solid contact interfaces

The conventional acoustic nonlinear technique to evaluate the contact acoustic nonlinearity (CAN) at solid-solid contact interfaces (e.g., closed cracks), which uses the through-transmission of normally incident bulk waves, is limited in that access to both the inner and outer surfaces of structures for attaching pulsing and receiving transducers is difficult. The angle beam incidence and reflection technique, where both the pulsing and receiving transducers are located on the same side of the target, may allow the above problem to be overcome. However, in the angle incidence technique, mode-conversion at the contact interfaces as well as the normal and tangential interface stiffness should be taken into account. Based on the linear and nonlinear contact stiffness, we propose a theoretical model for the reflection of an ultrasonic wave angularly incident on contact interfaces. In addition, the magnitude of the CAN-induced second harmonic wave in the reflected ultrasonic wave is predicted. Experimental results obtained for the contact interfaces of A16061-T6 alloy specimens at various loading pressures showed good agreement with theoretical predictions. Such agreement proves the validity of the suggested oblique incidence model.     

Fast beating null strip during the reflection of pulsed Gaussian beams incident at the Rayleigh angle

It is well known that harmonic bounded Gaussian beams undergo a transformation into two bounded beams upon reflection on a solid immersed in a liquid. The effect is known as the Schoch effect and can be found at the Rayleigh angle for thick plates and at the different Lamb angles for thin plates. Here, a study is made on the effect of pulsed Gaussian beams reflected on solids. It is found experimentally that the Rayleigh wave phenomenon still generates two reflected bounded beams, whereas Lamb wave phenomena do not generate this effect. This fact may be explained intuitively by realizing that the Rayleigh phenomenon is a coincidental phenomenon that is generated in situ, whereas the Lamb wave phenomenon is a non-coincidental phenomenon that is generated only after incident sound is influenced by both sides of a thin plate. Another explanation is the fact that Rayleigh waves are not dispersive, whereas stimulation and propagation of Lamb waves is frequency dependent. A pulse contains many frequencies and therefore only a fraction of the incident pulse is transformed into a Lamb wave. In this paper, numerical simulations are performed that show that actually the Schoch effect does occur neither for Rayleigh waves, nor for Lamb waves. As a matter of fact, a pulse, incident at the Rayleigh angle, generates two reflected lobes with a null zone of a different kind. The null zone is beating several times during the passage of each pulse. This results in a 'null zone' having a lower mean intensity than any of the two lobes, still less outspoken than for the case of harmonic incident bounded beams. This effect does only occur for Rayleigh wave generation and is much less outspoken for Lamb wave generation.     

Experimental study of ultrasonic beam sectors for energy conversion into Lamb waves and Rayleigh waves

When a bounded beam is incident on an immersed plate Lamb waves or Rayleigh waves can be generated. Because the amplitude of a bounded beam is not constant along its wave front, a specific beam profile is formed that influences the local efficiency of energy conversion of incident sound into Lamb waves or Rayleigh waves. Understanding this phenomenon is important for ultrasonic immersion experiments of objects because the quality of such experiments highly depends on the amount of energy transmitted into the object. This paper shows by means of experiments based on monochromatic Schlieren photography that the area within the bounded beam responsible for Lamb wave generation differs from that responsible for Rayleigh wave generation. Furthermore it provides experimental verification of an earlier numerical study concerning Rayleigh wave generation.     

Evaluation of the cement bond quality through filtering the reflected ultrasonic waves

High cement bond quality is required to keep an oil well from hydraulic communication between zones.In the cement bond evaluation,the ultrasonic echo method is widely used for its capability of channeling azimuth detection.Full waveforms reflected from the cased hole are simulated for different bonding conditions by the generalized transfer matrix method.Because of the high acoustic impedance of casing,the amplitudes of the reflected waves from the cement and the formation are small and cannot easily be used to evaluate the cementing condition.The wave that can propagate into the cement and the formation through the casing concentrates closely on the casing resonant frequency.To reduce the amplitude of the reflected wave from the casing inner surface and highlight the part of the reflected wave which carries the cementing quality information,the reflected full wave is filtered according to the casing resonant frequency.There are several wave packets in the filtered waveform.When the amplitude of the second wave packet is low,the cement bonds well with the casing,otherwise poorly.A low amplitude third wave packet is an indication of a good bond of the cement with the formation,otherwise poor.To reveal the sensitivity of the reflection wave amplitudes to the incident angle,reflected full waveform is modeled when an acoustic beam with finite width is incident on the casing.It is shown that the bond evaluation method based on filtered wave packets is valid for incident angle less than 5 degrees.     

振荡介质中平面波的反射

在复金慈堡-朗道方程描述的振荡介质中研究了平面波的反射.从理论上给出了产生反射的条件,导出了反射波和入射波这两个区域的分界线与两种介质分界线的夹角.发现两类反射,一类为回折射产生的反射,对于这类反射,理论上给出了反射角;另一类为纯反射,它与折射无关.理论分析与数值模拟结果均表明：只有当入射角大于临界入射角才会发生反射,而且反射角等于临界入射角;对于纯反射,反射角随波频率增大而增大. 关键词： 复金慈堡-朗道方程 平面波 反射     

Deformation Features on the Free Surface and Rigid Interface during Elastic Wave Reflection

Analytical expressions defining the reflection coefficients have been derived in the framework of the known problem of elastic wave reflection from the free surface and rigid interface. The found reflection coefficients are used to analyze the dependences of different strain and rotation components during elastic wave reflection from the free surface and rigid interface in the case of ideal contact and possible slip on the wave incidence angle and elastic parameters of the medium. Deformation features of elastic media at the studied interfaces are considered for incident longitudinal and transverse waves.     

Observation of the lateral displacement of surface acoustic beams reflected at boundaries of layered substrates

The reflection of an acoustic surface wave incident on a velocity discontinuity is studied near the critical angle by using an optical-diffraction probe. The abrupt velocity change is implemented on fused quartz and on single crystal quartz substrates by plating the surface with a prism-shaped gold layer. A lateral displacement of the reflected beam, relative to the mirror-reflection path, is observed. For angles of incidence corresponding to total reflection, the phenomenon exhibits a behaviour which is similar to the Goos-Hänchen effect encountered at the total reflection of bounded electromagnetic waves. However, contrary to the electromagnetic case, it is found here that a significant lateral shift occurs also for angles well into the partial-reflection region and that the reflected beam profile is considerably distorted at the critical angle. These observations may be evidence of a leaky-wave mode along the boundary of the plated area, with the phase-matching condition satisfied at or near the critical angle.