电化学方法测定纳米材料的热力学函数

以纳米铜为例,首次采用电化学方法获取纳米材料的热力学函数.通过电化学沉积法制备了粒子尺寸约80nm的纳米铜电极,测定纳米铜与块体铜电极的电势差,以块体铜的热力学函数值为参考标准,根据纳米铜与块体铜的热力学关系式,求得纳米铜的标准摩尔生成焓、标准摩尔生成吉布斯自由能、标准摩尔熵分别为5.16kJmol-1、0.216kJmol-1、49.75JK-1mol-1,同时,求得纳米铜可逆电池反应的热效应为-4.95kJmol-1.     

ZnO纳米片层结构的原位生长机理及热力学函数

采用绿色水介质体系一步合成了3种不同尺寸的ZnO纳米片层结构。 通过微热量技术获取其原位生长过程的热谱曲线,从动力学和热力学角度分析其生长机理;利用电化学方法测定了不同温度下纳米ZnO与块体ZnO原电池的电势差,结合热力学基本公式求算出ZnO纳米片层结构的热力学函数值,并与生长机理关联讨论。 结果表明,ZnO纳米片层结构的生长经历了先表观吸热后表观放热,放热减慢,最后到达放热平台的热量变化阶段。 标准摩尔熵、标准摩尔生成Gibbs自由能及标准摩尔生成焓均随着尺寸减小而逐渐增大。 本文为纳米材料的原位生长机理与热力学函数的关联研究提供了新的思路和方法。     

野草状纳米氧化锌的制备及标准摩尔生成焓

本文采用反相微乳液法制备了尺寸均匀的野草状ZnO纳米结构. 依据热力学势函数法获得了纳米ZnO与块体ZnO标准摩尔生成焓的关系, 并结合微量热技术求得了所制备产物的标准摩尔生成焓, 为研究其它纳米材料的标准摩尔生成焓提供了一种广泛适用的新方法.     

尺寸效应对氧化锌微/纳体系热力学性质的影响

采用微乳液水热辅助法合成了三种不同尺寸的手榴弹状ZnO 微/纳结构. 通过设计热化学循环, 建立了纳米ZnO与块体ZnO体系热力学性质之间的关系. 并结合微量热技术对不同尺寸ZnO微/纳体系的热力学性质进行了计算. 结果表明, 尺寸效应对微/纳体系热力学性质有显著的影响: 随着反应物尺度的减小, 体系的标准摩尔反应焓、标准摩尔反应Gibbs 自由能、标准摩尔反应熵均降低, 而材料自身的标准摩尔生成焓、标准摩尔生成Gibbs 自由能、标准摩尔熵均增加.     

四针状纳米氧化锌的热力学函数

采用简单、温和的微乳液水热辅助法合成了尺寸、形貌均匀的四针状ZnO纳米结构,每个结构由四根长约250nm的纳米针组成．基于块体ZnO的热力学函数已知,依据热力学势函数法设计热化学循环,将纳米ZnO与块体ZnO的热力学函数进行了关联．并结合热动力学理论及过渡态理论,利用微量热技术获得了所制备的四针状纳米ZnO在298．15K下的标准摩尔生成焓、标准摩尔生成Gibbs自由能、标准摩尔熵值分别为（-329．37±0．43）kJmol-1,（-318．51±0．03）kJmol-1,（20．36±1．05）Jmol-1 K-1．     

八面体纳米钼酸钡的制备及标准摩尔生成焓的测定

根据热力学势函数法建立纳米钼酸钡与块体钼酸钡标准摩尔生成焓之间的关系, 利用原位微量热技术获取纳米钼酸钡与盐酸反应的反应热, 以已知的块体钼酸钡的标准摩尔生成焓－1507.5 kJ•mol^－1为参考标准, 求得由反相微乳液法制备的八面体纳米钼酸钡的标准摩尔生成焓为(－336.62±0.33) kJ•mol^－1, 两种材料标准摩尔生成焓数值的差异证明纳米结构比块体结构能态更高, 更加不稳定.     

二维ZnO纳米片的热力学研究

采用水热法合成了二维ZnO纳米片,并通过扫描电镜(SEM),X射线粉末衍射仪(XRD)对其形貌尺寸和物相进行表征,合成的多孔状纳米纯度高,且结晶度好。采用原位微热量技术,得到了过程的热动力学信息,结合热化学循环、热动力学原理及动力学过渡态理论,获取了二维ZnO体系的整体热力学函数和表面热力学函数,讨论了温度对表面焓、表面熵和表面吉布斯自由能的影响规律。结果表明：(i)纳米ZnO整体热力学函数：标准摩尔生成吉布斯自由能、标准摩尔生成焓和标准摩尔熵均比块体的大;(ii)随着温度的升高,表面焓和表面熵增加,表面吉布斯自由能则减少。     

纳米氧化锌的标准摩尔生成焓

采用微乳液-水热辅助法合成了尺寸、形貌均匀的ZnO纳米棒,其长度约400 nm,直径约50 nm。基于将纳米ZnO与块体ZnO的标准摩尔生成焓相关联,依据热力学势函数法设计热化学循环,获得了纳米ZnO与块体ZnO标准摩尔生成焓的关系。结合微量热技术求算出了下所制备的ZnO纳米棒在298.15 K下的标准摩尔生成焓为(-331.70±0.42)kJ.mol-1。     

不同粒度八面体纳米钼酸镉的表面热力学性质

室温条件下,采用反相微乳液法制备了一系列不同粒度的八面体纳米CdMoO4,并对其组成、结构及形貌进行了表征.基于纳米CdMoO4与块体CdMoO4热力学性质的本质差异,结合化学热力学基本理论与热动力学原理,导出了获取纳米CdMoO4表面热力学性质的关系式;在此基础上,利用原位微量热技术成功获得了所制备的不同粒度八面体纳米CdMoO4的表面热力学函数,如比表面Gibbs自由能、比表面焓和比表面熵.本文为获取纳米材料表面热力学函数提供了一种有效而普适的新方法.     

花生状微/纳米CaMoO_4的表面热力学性质

采用室温反相微乳液法制备了3种不同尺寸的花生状微/纳米CaMoO4.基于纳米CaMoO4与块体CaMoO4热力学性质的本质差异,结合化学热力学基本理论及热动力学原理,推导出纳米CaMoO4摩尔表面热力学函数的关系式.在此基础上,采用原位微量热技术获得了花生状微/纳米CaMoO4的摩尔表面热力学函数.结果表明,花生状微/纳米CaMoO4的表面热力学性质变化具有尺寸效应,即随着尺寸的减小,摩尔表面焓、摩尔表面Gibbs自由能、摩尔表面熵均增加.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.