紫外拉曼光谱研究焙烧气氛对氧化锆相变的影响

 以紫外拉曼光谱技术研究了在不同焙烧气氛中氧化锆样品的表面晶相结构及其转变过程．结果表明，在有氧气氛中焙烧的氧化锆样品易转变为单斜相，而在惰性气氛中焙烧可以有效地稳定样品体相和表面的四方相结构．在缺氧气氛中焙烧的样品暴露于空气中后，表面极易转变为单斜相，而其体相仍为四方相结构，这表明四方相氧化锆在样品表面是极不稳定的．     

Chemometric strategies for enhancing the chromatographic methodologies with second-order data analysis of compounds when peaks are overlapped

This overview covers the different chemometric strategies linked to chromatographic methodologies that have been used and presented in the recent literature to cope with problems related to incomplete separation, the presence of unexpected components in the sample, matrix effect and changes in the analytical signal due to pre-treatment of sample.Among the different chemometric strategies it focuses on pre-treatment of data to correct background and time shift of chromatographic peaks and the use of second-order algorithms to cope with overlapping peaks from analytes or from analytes and interferences in liquid chromatography coupled to diode array, fast-scanning fluorescence spectroscopy and mass spectrometry detectors. Finally the review presents the strategies used to deal with changes in the analytical response as result of matrix effect in liquid and gas chromatography, as well as the use of standardization strategies to correct modifications in the analytical signal as a consequence of sample pre-treatment in liquid chromatography.     

The effect of dose on light-sensitivity of radicals in alanine EPR dosimeters

In this work we present a study of light-induced effects on free radicals and their transformations in gamma-irradiated pure L-alanine and in commercially available alanine detectors: rods, pellets and films. Samples irradiated to doses from 2 Gy to 4000 kGy were exposed to light from a fluorescent lamp and to ordinary daylight. The observed changes in EPR spectra of the samples were analyzed with regard to their intensity and shape. The shape analysis was based on numerical decomposition of the measured spectra into model spectra reflecting contributions of R1, R2 and R3 radical populations in the samples. The illumination of alanine dosimeters resulted in significant decrease of the central EPR line and was accompanied by distinct variations in the shape of EPR spectra. The rate of light-induced decay in spectra amplitude was found to be dependent on dose of ionizing radiation--the sensitivity to light was decreasing with increase in dose in all detectors in the 2-5x10(5) Gy dose range. The exposure of gamma-irradiated (to 300 Gy) alanine to normal, diffused daylight resulted in decay of the signal amplitude at rate about 0.5% per week. It was shown that decay in the R1 component was responsible for the observed reduction of the spectra amplitude. The observed increase in R2 contributions in samples exposed to light confirmed a hypothesis of R-->R2 radical transformations promoted by visible light. The reported effects indicate a necessity of protection of irradiated dosimeters from their prolonged exposure to light.     

How to approach membership of IAF/ILAC Arrangements: the peer evaluation system of IAF and ILAC for single accreditation bodies

Peer evaluation is used by the international accreditation organisations IAF and ILAC as a tool to harmonise the results of accreditation of conformity assessment bodies and as a control mechanism to ensure constantly competent services according to harmonized standards. Upon positive evaluation outcome, the accreditation body may join an Arrangement (MLA/MRA) between accreditation bodies, confirming systematic reliability and competence to the market. The objective of these Arrangements is that they will cover all accreditation bodies in all countries in the world, thus eliminating the need for suppliers of products or services to be certified in each country where they sell their products or services. This article is to aid single accreditation bodies wishing to sign these Arrangements in the future, and, furthermore, to communicate the procedure and the relevance of evaluation to the public in order to build up confidence in such Arrangements.     

Partitioning Solvophobic and Dispersion Forces in Alkyl and Perfluoroalkyl Cohesion

Fluorocarbons often have distinct miscibility properties compared to their nonfluorinated analogues. These differences may be attributed to van der Waals dispersion forces or solvophobic effects, but their contributions are notoriously difficult to separate in molecular recognition processes. Here, molecular torsion balances were used to compare cohesive alkyl and perfluoroalkyl interactions in a range of solvents. A simple linear regression enabled the energetic partitioning of solvophobic and van der Waals forces in the self‐association of apolar chains. The contributions of dispersion interactions in apolar cohesion were found to be strongly attenuated in solution compared to the gas phase, but still play a major role in fluorous and organic solvents. In contrast, solvophobic effects were found to be dominant in driving the association of apolar chains in aqueous solution. The results are expected to assist the computational modelling of van der Waals forces in solution.     

Microdeformation in Poly-L-lactide and Poly-L-lactide + Hydroxyapatite Nanocomposite Thin Films

In order to gain new insight into failure mechanisms in poly-L-lactide (PLLA) and PLLA + hydroxyapatite nanocomposites, transmission electron microscopy has been used to investigate room temperature microdeformation in electron transparent thin films of these materials subjected to various heat treatments and deformed in tension using the “copper grid” technique. In amorphous PLLA the dominant microdeformation mechanism was crazing. Localized fibrillar deformation zones (DZs) were also observed in semicrystalline films, tending to propagate in regions where the lamellar trajectories were at high angles to the tensile axis. Thus, in spherulitic films, in which the lamellae formed well-defined stacks with approximately straight trajectories at the scale of the spherulite radii, individual DZs were observed to propagate over relatively large distances, as in the amorphous films. On the other hand, films cold crystallized by heating from the glassy state showed more homogeneous lamellar textures. These were associated with a relatively high density of low aspect ratio DZs. Addition of well dispersed nanosized hydroxyapatite (nHA) to the amorphous PLLA films was also found to result in an increase in the craze density, attributed to stress concentrations associated with void formation at the PLLA-particle interfaces during deformation. However, interpretation was less straightforward in cold crystallized PLLA + nHA thin films, owing to a correlation between the lamellar texture and the nHA particles. In this case, both void formation and favorable lamellar orientations may have contributed to initiation of the DZs in the vicinity of the particles. The results are argued to be broadly consistent with previous observations of the behavior of bulk PLLA and PLLA + nHA films with a range of microstructures, in which there was evidence for an improvement in ductility in the presence of the nHA, again attributed to voiding at the PLLA-particle interfaces.     

Theoretical study of the mechanism of proton transfer in tautomeric systems: Alloxan

Semiempirical SCF-MO studies of tautomerism in alloxan preclude the possibility of direct proton transfer in the gas phase due to the strain in the four-centred transition state, in which the proton being transferred is forced to come close to the positively charged carbon atom at the opposite corner of the four-membered ring. However, in aqueous solution, the activation barrier reduces appreciably, not only due to reduction in strain, but also due to charge separation in the transition state, which is stabilized due to ionic resonance. The N-H bond is almost broken, while the O-H bond is only partially formed in the transition state. The other stabilizing effect in aqueous solution is due to bulk solvent dielectric effects, which stabilize the transition state to a greater extent due to its higher dipole moment. Although the transition states for proton transfer to the neighbouring oxygen atoms on either side have comparable energies, as the mechanisms of proton transfer leading to the formation of the 2-hydroxy and 4-hydroxy tautomers are similar, bulk solvent effects are larger in the latter due to the higher dipole moment of the transition state. The reason is the almost complete separation of the two entities, i.e. the alloxan anion and the hydronium ion in the latter case, indicating that in this case a dissociative mechanism of the kind encountered in acid-base equilibria is operating.     

Hygienic aspects related to burial

Burial grounds are generally provided by local authorities in cemeteries (subject to planning consent and to compliance with any considerations for environmental health). Their design has been submitted to studies of hydrogeological characteristics of soil with regard to its ability to purify wastewater coming from corpse decomposition, its ability to avoid the infiltration of pollutants in groundwater, and its ability to skeletonize buried corpses within the given times foreseen by the law in force. Greater environmental awareness has necessitated that new and existing burial grounds are assessed to determine the environmental load which they could release to soil or any downstream component. This problem arises in countries where there is a high density of built-up areas, a custom of disposing of the dead by burial, a lack of available spaces and suitable soils to designate as burial grounds. This paper reports some results from a study carried out on ground lands of Italy in order to revise articles 82 and 83 of the Decree No 285 of 1990 in force in relation to burial grounds. Soil permeability to water and air is a parameter of critical importance in relation to purification and/or diffusion of leachates from inhumed corpses in the soil, and in relation to its influence on the time necessary to completely skeletonize a human corpse.     

Tracing (r)bST in cattle: Liquid-based options for extraction and separation

Growth hormone (GH) or somatotropin (ST) is a species-specific polypeptide hormone produced in the pituitary gland of vertebrates. When administered exogenously to dairy cattle, it has galactopoietic effects and is capable of increasing the milk yield. The beginning of the commercial production of recombinant variants of bovine somatotropin (rbST), by the end of the 20th century, had a major economic impact in the dairy industry. Recombinant bST enabled large-scale applications in farms, enhancing significantly milk production. While it is banned in the European Union (EU), several countries permit the trade and use of recombinant somatotropins in animal husbandry. Also, rbST-free dairy products can be frequently found in the market of those countries, even though these labels are not actually verified in a laboratory. In this context, effective analytical methods are needed for residue control to avoid an illegal use of rbST but also to prevent fraudulent labeling in some cases. The present review includes studies published in the last 5 years (from 2012 to 2017) to monitor rbST in bovine animals, using liquid-based applications. It is then intended to serve as a practical guide to help those laboratories interested in developing analytical methods to detect rbST use and abuse.     

Analytical strategies to determine antibiotic residues in fish

The accelerated growth of aquaculture has resulted in a series of harmful effects to human health. The widespread and unrestricted use of antibiotics in this industry, to prevent bacterial infections, leads to remaining amounts in the aquatic environment. This has resulted in the emergence of antibiotic-resistant bacteria in aquaculture environments, in the increase in antibiotic resistance in fish pathogens as well as in the transfer of these resistance determinants to human pathogens. Moreover, the use of large amounts of antibiotics may lead to the presence of residual antibiotics in fish tissue and fish products. Fluoroquinolones, tetracyclines, penicillins, sulphonamides and other antibiotics, exhibiting activity against both Gram-positive and Gram-negative bacteria, are widely used for the treatment and prevention of diseases in fish. An extended and comprehensive review on the recent analytical methodologies concerning antibiotic residues in fish reported in the literature is provided in the present article. Emphasis is given on sample preparation regarding isolation and purification, chromatographic conditions and method validation according to legislation. Results of published assays are comparatively presented and criticised.     

QSAR for Acetylcholinesterase Inhibition and Toxicity of Two Classes of Phosphoramidothioates

Abstract

Methamidophos (Met) is a weak inhibitor of housefly head AChE but at the same time it is highly toxic to the common housefly. The lethality of Met is believed to be due to AChE inhibition. An extensive QSAR study may help in determining the mode of action of Met in vivo and in vitro and provide a rational for its high insecticidal toxicity. Acephate (Ace), like Met, is a poor inhibitor of AChE in vitro and has a comparable to Met insect toxicity in vivo. Contrary to Met, though, Ace has much lower mammalian toxicity. Understanding the structural properties which make insecticides toxic to insects but not to mammals is of great importance, since mammals (including humans) are inadvertently exposed to these compounds.

Our results were consistent with the model in which both the in vitro and in vivo toxicity of Met depends on the inhibition of the active center of AChE by the unchanged Met. An optimal susceptibility to hydrolysis is needed for Met and its analogs to have high insecticidal activity since in order to phosphorylate AChE they need to be hydrolyzed and at the same time their stability is of great importance in vivo for accumulating at the site of action. The insecticidal activity of Ace analogs may be due to direct interaction with the active center of the AChE. The mammalian toxicity of Ace analogs may be due to interaction with an 'allosteric' reaction center in the AChE.     

Review of Mesoscopic Modeling of Liquids in Materials Science

Mesoscopic theories can be used in the field of materials science to derive local average properties of relevance to the engineer such as flux, pressure, average density or composition. In the following density functional theory will be described and applied to different systems of interest and in particular, to materials formed from complex liquids as characterized by atomic structure and the type of interaction between the individual particles. The calculation of the solid to liquid transition will be explained in detail as a prototype for other order disorder transitions. The theory of polymers in solution will be revisited and used to calculate phase separation in mixtures. An extension of the theory to include the orientation of rodlike, long molecules will be applied to liquid crystals. In the presence of an interface, the system properties depend strongly on position in space and can be predicted from parameters obtained in the bulk in a square gradient approximation for sufficiently smooth and small deviations from the uniform distribution. A phase transition is often used to prepare heterogeneous materials by nucleation and growth. It will be shown how the equilibrium theory can be extended to study the dynamics of nonequilibrium phenomena.     

Towards quantitative laser-induced breakdown spectroscopy analysis of soil samples

A quantitative analysis of chromium in soil samples is presented. Different emission lines related to chromium are studied in order to select the best one for quantitative features. Important matrix effects are demonstrated from one soil to the other, preventing any prediction of concentration in different soils on the basis of a univariate calibration curve. Finally, a classification of the LIBS data based on a series of Principal Component Analyses (PCA) is applied to a reduced dataset of selected spectral lines related to the major chemical elements in the soils. LIBS data of heterogeneous soils appear to be widely dispersed, which leads to a reconsideration of the sampling step in the analysis process.     

Simultaneous butyltin determinations in the microlayer,water column and sediment of a northern Chesapeake Bay marina and receiving system

Butyltins were determined in the microlayer, water column and sediment of a northern Chesapeake Bay marina and its receiving system. Concentrations of the toxicant species tributyltin (TBT) ranged from 60 to 4130 ng dm⁻³ in the microlayer, from 34 to 367 ng dm⁻³ in the water column and from <0.05 to 1.4 m̈g g⁻¹ (dry weight) in sediment. TBT concentrations in all three environmental compartments were higher in the marinas than in the receiving system. Concentrations of TBT in the microlayer and water column of the study area were potentially toxic to sensitive aquatic biota. The microlayer appears to be depleted in dibutyltin relative to tributyltin compared to both water column and sediment.     

A dynamic view to the modulation of phosphorylation and O-GlcNAcylation by inhibition of O-GlcNAcase

Protein phosphorylation and O-GlcNAcylation are reciprocally regulated. As hyperphosphorylation is implicated in tau pathology, approaches have been exploited to reduce the magnitude of tau phosphorylation by increasing the level of tau O-GlcNAcylation. With mathematic models constructed to describe different kinetic scenarios, we analyzed the temporal change of an O-GlcNAcylated protein in contrast to that of the phosphorylated form upon inhibition of O-GlcNAcase (OGA). The analyses indicate that when degradation of the modified protein is negligible relative to the naked one, the magnitude of O-GlcNAcylated protein increase is proportional to the level of inhibition, while the extent of phosphorylated protein decline varies due to other factors. Furthermore, the increase of O-GlcNAcylated protein parallels with the decrease of phosphorylated form upon acute or short-term inhibition of OGA, as observed in many in vitro and short term in vivo studies. However, phosphorylated protein is predicted to return to its initial level while O-GlcNAcylated protein to achieve a higher steady level under sustained inhibition. This simulated result is in line with a recent report on long-term inhibition of OGA in transgenic mice. Noticeably, inhibition withdrawal is anticipated to cause a transient rise of phosphorylated protein. If degradation of modified proteins proceeds in addition to the naked one, the characteristic temporal profiles of each form in response to OGA inhibition would depend on the relative importance of individual degradation pathways. The models described herein may serve as a useful investigational tool that will provide insight into pharmacological intervention for tauopathies in particular and for reciprocally modulated reactions in general.     

Quantification of particle-bubble interactions using atomic force microscopy: A review

The attachment of particles to bubbles in solution is of fundamental importance to several industrial processes, most notably in the process of froth flotation. During this process hydrophobic particles attach to air bubbles in solution, which allows them to be separated as froth at the surface. The addition of chemicals can help to modulate these interactions to increase the yield of the minerals of interest. Over the past decade the atomic force microscope (AFM) has been adapted for use in studying the forces involved in the attachment of single particles to bubbles in the laboratory. This allows the measurement of actual DLVO (Derjaguin, Landau, Vervey and Overbeek) forces and adhesive contacts to be measured under different conditions. In addition contact angles may be calculated from features of force versus distance curves. It is the purpose of this article to illustrate how the colloid probe technique can be used to make single particle-bubble interactions and to summarise the current literature describing such experiments.     

From solution-phase to solid-phase enyne metathesis: crossover in the relative performance of two commonly used ruthenium pre-catalysts

A crossover in the ability of two distinct ruthenium-based metathesis pre-catalysts to effect the synthesis of dialkenylboronic esters in solution and on the solid-phase was observed. Specifically, while the Grubbs 2nd generation pre-catalyst 3 affords a greater degree of conversion to product than the Hoveyda-Grubbs pre-catalyst 2 in a solution-phase enyne-metathesis reaction, this trend is reversed in the solid-phase variant. Systematic investigation showed this trend to be general, regardless of variations in the homoallylic alcohol and alkynylboronic ester components of the reaction, as well as in the type of solid support employed. Experiments to determine a mechanistic hypothesis for this trend highlighted the significance of the ruthenium remaining bound to the substrate after metathetic rearrangement and found the presence of phosphine ligand to be detrimental to the success of the solid-phase reaction. Therefore, these results suggest an expanded role for phosphine-free pre-catalysts, such as 2, in challenging solid-phase metathesis reactions.     

In Operando Analysis of Diffusion in Porous Metal-Organic Framework Catalysts

The potential to exert atomistic control over the structure of site-isolated catalyst sites, as well as the topology and chemical environment of interstitial pore spaces, has inspired efforts to apply porous metal-organic frameworks (MOFs) as catalysts for fine chemical synthesis. In analogy to enzyme-catalyzed reactions, MOF catalysts have been proposed as platforms in which substrate confinement could be used to achieve chemo- and stereoselectivities that are orthogonal to solution-phase catalysts. In order to leverage the tunable pore topology of MOFs to impact catalyst selectivity, catalysis must proceed at interstitial catalyst sites, rather than at solvent-exposed interfacial sites. This Minireview addresses challenges inherent to interstitial MOF catalysis by 1) describing the diffusional processes available to sorbates in porous materials, 2) discussing critical factors that impact the diffusion rate of substrates in porous materials, and 3) presenting in operando experimental strategies to assess the relative rates of substrate diffusion and catalyst turnover in MOF catalysis. It is anticipated that the continued development of in operando tools to evaluate substrate diffusion in porous catalysts will advance the application of these materials in fine chemical synthesis.     

A short-term NaCl exposure increases the Na(+) conductance of outward-rectified cation currents in the pith cells of sweet pepper

The regulatory role of pith cells in the stem in Na(+) recirculation in sweet pepper was investigated by evaluating the transport characteristics of the plasma membrane of this cell type and comparison with those of root cells. Ion conductivity and Na(+) permeability of the plasma membranes of protoplasts of both cell types were studied with the patch-clamp technique in the whole-cell configuration, before and after addition of NaCl to the bath medium. Protoplasts of both pith and root cells showed outward rectifying currents with a reversal potential (V(r)) near to the equilibrium potential of K(+) (EK). Addition of NaCl to the bath medium caused a stronger shift of the reversal potential, V(r), in pith protoplasts than in root protoplasts, indicating that the outward rectified currents are permeable to Na(+), especially in the pith cells.After plant exposure to exogenous NaCl via the nutrient solution for 1 week, V(r) in the root cells was closer to EK than in the control plants and hardly shifted upon addition of Na(+). This indicated that the net permeability of the OR channel complement in the plasma membrane to Na(+) was lower following exposure to Na(+). V(r) in the pith protoplasts, on the other hand, shifted significantly more than in the control plants, suggesting an increase of the permeability to Na(+). Moreover, the Na(+) channel blocker amiloride blocked the currents in this cell type. It is concluded that pith cells have appropriate features of outward rectified currents to enable Na(+) accumulation or release when NaCl is present in or removed from the nutrient medium. Probably, exogenous NaCl even induced expression and formation of Na(+)-permeable channels in pith cells.     

Sol-Gel Fabrication of Rare-Earth Doped Photonic Components

The use of sol-gel to fabricate silica-on-silicon waveguides, and particularly erbium-doped waveguide amplifiers, is reviewed. In particular, efforts to use sol-gel to improve molecular homogeneity in heavily Er-doped silica-based films is discussed. A variety of material studies carried out to investigate the gain limitations found in these materials is then presented. These include x-ray diffraction, ellipsometry and Rutherford backscattering. Excess heat treatment is used to force crystallisation of the films, and analysis of the resulting structure is used to infer properties of the glass before the additional heating. The use of erbium alkoxide precursors is shown to alter the erbium environment in the final glass, in comparison to the use of inorganic erbium salts.