基于3D受限自组装构筑中空介孔氧化硅/碳复合微球

发展简单、高效、可控的方法来制备中空介孔微球是介孔材料领域的研究热点.本工作结合嵌段共聚物的三维受限自组装(3D-CSA)和自模板碳化策略,建立了一种构筑中空介孔微球的新方法 .首先,采用乳液-溶剂挥发法实现嵌段共聚物与全氟辛烷(PFO)在3D受限空间的分级组装,获得了核-壳结构微球,其中壳层由微相分离的嵌段共聚物构成.然后,在壳层的连续相选择性地复合氧化硅,既实现了无机框架的负载,又实现了对连续相聚合物链选择性交联.对复合微球进行煅烧处理后,实现了壳层连续相聚合物的选择性碳化,获得了中空介孔氧化硅/碳复合微球.本研究系统地阐述了核-壳型分级结构微球的形成机理和必备条件,研究了氧化硅前驱体添加量和嵌段共聚物分子量对中空介孔氧化硅/碳复合微球形貌的影响,为制备中空介孔微球材料提供了一种简便、可控的方法.     

ZSM-5@Mesoporous Silica核壳复合结构分子筛的制备及其甲苯甲醇烷基化择形催化性能的研究

采用阳离子表面活性剂模板法在ZSM-5晶体颗粒表面外延生长介孔氧化硅壳层来调变其外表面酸性, 制备了具有高择形催化性能的介孔氧化硅包裹ZSM-5分子筛的微孔-介孔核壳结构复合材料ZSM-5@mesosilica. 扫描电镜和高分辨透射电镜表征显示, 具有无序孔道结构的介孔壳层均匀包覆于ZSM-5晶粒的外表面, 而且壳层的厚度在一定范围内可调变; 另外, 壳层介孔的孔道走向垂直于分子筛核, N₂吸附曲线表明复合材料的微孔和介孔具有互通性. 吡啶吸附和氨吸脱附实验结果证明这些分子可以自由扩散进入分子筛的微孔道, 并且介孔壳层包覆以后ZSM-5分子筛内的酸性位和强度基本没有变化. 用固定床评价了该复合分子筛对甲苯甲醇烷基化反应的催化性能, 结果表明, 与常规ZSM-5相比, ZSM-5@mesosilica核壳材料表现出了较高的对位选择性. 核壳材料独特的择形催化性能归因于介孔氧化硅壳层将ZSM-5非择形性的外表面酸性位部分覆盖, 从而抑制了对二甲苯在外表面的二级异构化反应.     

核-壳介孔SiO_2微球的超微结构及拉曼光谱分析

采用溶胶-凝胶法制备了核-壳介孔SiO2微球,分别利用透射电镜和拉曼光谱对该微球的超微结构进行了观察及光谱分析。结果表明:制备的核-壳介孔SiO2微球是由外表面孔径为7nm、厚度30nm的有序介孔SiO2壳层,包裹着核直径为200nm的实心SiO2微球所组成,介孔壳层具有较大的比表面积,具有良好的光谱性质。     

单分散核-壳结构介孔二氧化硅微球的合成

在酸性条件下, 采用非离子表面活性剂嵌段共聚物为模板剂, 季铵盐阳离子表面活性剂为共导向剂, 在预先合成的尺寸均一的单分散实心氧化硅微球表面包裹了有序介孔氧化硅层, 进一步通过高温水热处理, 获得了具有良好分散性和均匀尺寸的介孔壳层(孔径7 nm)氧化硅微球(~500 nm). 氧化硅微球外部包裹的介孔壳层具有较大的比表面积(188 m2/g)和孔容(0.23 cm3/g).     

"面包圈"状高有序度大孔径介孔分子筛SBA-15的合成

介孔材料因其高度有序的大孔径、较佳的催化吸附性能、良好的电磁性质及易于剪裁而引起人们极大的兴趣[1～9].人们已相继合成了介孔氧化硅薄膜[3,10]、球[12]、空心球[4,13]和纤维[12～15]等,并设法控制中孔材料晶体外貌[3～9,15～21].最近,我们报道了利用多相组装和无机晶体(如NaCl,LiCl)作大孔结构导向剂的方法[16],合成了人造"珊瑚"状介-大孔氧化硅膜[13].Lin等[17]用共表面活性剂法在丁醇存在下合成了多组有序结构的介孔氧化硅空心球; Shio等[21]在完全溶解的硅酸钠和阳离子表面活性剂溶液中,合成了细棒状介孔氧化硅粉末.本文报道一种控制介孔材料颗粒外貌和形状的新方法,即共溶剂法,并以此法合成了高有序度、大孔径、 "面包圈"状介孔氧化硅SBA-15.这种新材料有望在微加工、催化、生物分离、电子器件的矿化、色谱载体等方面得到应用[1～9].     

有机功能化介孔氧化硅的制备和表征

有机功能化的介孔氧化硅在催化领域、吸附分离、生物化学和电子学等领域有广泛的应用前景。本文综述了近年来有机功能化介孔氧化硅的研究进展,主要介绍了有机功能化的介孔氧化硅的制备方法、种类和表征手段,并对其未来发展前景进行了展望。有机功能化的介孔氧化硅的制备方法主要有接枝法、共缩聚法、有序介孔有机硅法和自模板法,常用的表征方法有粉末X-射线衍射分析、低温N₂吸附-脱附、透射电镜、红外光谱、热重分析、元素分析和²⁹Si、¹³C交叉极化和魔角旋转核磁共振等。     

磁性分子印迹聚合物核壳微球的制备及应用*

分子印迹技术是综合高分子化学、生物化学等学科发展起来的一门边缘学科。通过分子印迹技术制备的聚合物具有吸附选择性好、色谱效率高、便于功能设计等优点,在色谱分离、固相萃取、传感器、药物控释等领域得到了广泛的应用。磁性聚合物微球是近年发展起来的一种新型多功能材料,已广泛应用于生物分离、药物控释、疾病诊断等领域。在磁性粒子表面进行分子印迹制备的磁性分子印迹聚合物核壳微球,兼有良好的超顺磁性和高选择吸附性两大优点,具有广阔的应用前景。本文重点综述了磁性分子印迹聚合物核壳微球的制备方法以及在化学分析、生物分离和药物控释方面应用的研究进展,并指出了该领域工作存在的问题及今后的发展方向。     

十二烷基苯磺酸钠改性的尿素和甲醛聚合杂化法合成氧化硅微球

本文在存在十二烷基苯磺酸钠时利用正硅酸乙酯水解液中尿素和甲醛的结晶性聚合反应合成得到了氧化硅微球。首次考察了尿素和甲醛的物质的量比、尿素和甲醛的总用量、正硅酸乙酯(TEOS)用量、酸用量、以及十二烷基苯磺酸钠用量对所得氧化硅微球结构和形貌特征的影响。适当选择这些用量范围可以得到结构稳定、分散均匀的氧化硅微球。在微球生长中尿素和甲醛的量不足时,其突出的结晶性聚合与氧化硅杂化反应进程相互影响,导致了氧化硅微球核壳结构的形成。酸用量增加使氧化硅微球的孔径分布从复杂的双峰转变成均匀的单峰。表面活性剂的使用使氧化硅微球的孔分布从0～80 nm范围内的连续分布转化成单一分布。这些结果对正硅酸乙酯水解液直接合成氧化硅微球方法的推广和应用具有重要指导意义。     

大粒径介孔氧化硅微球的优化合成及表征

以非离子型嵌段共聚物为模板剂、正硅酸乙酯为硅源,制备了一种比表面积为712m2·g-1、孔径6.93nm、孔容1.06cm3·g-1、粒径10μm的介孔SBA-15微球,采用扫描电镜考察了各种合成条件对介孔氧化硅微球形貌的影响,对SBA-15介孔微球的合成条件优化和形成机理进行了研究和探讨。结果表明:介孔氧化硅微球的生长可以看作一个由微小溶胶粒子发生渐进聚沉、成长为较大溶胶粒子的过程;共表面活性剂和无机盐的引入对介孔微球的形成具有辅助作用;合成体系的酸度和晶化阶段之前的陈化条件是介孔微球形成的关键所在。在共聚物的盐酸溶液(1mol·L-1)中,不添加共表面活性剂和无机盐,仅控制陈化条件于35℃静置24h,100℃水热处理24h,可得到大粒径的介孔SBA-15微球。     

磁性金属-有机骨架复合材料的构建及在环境中的应用

磁性金属-有机骨架(MMOFs)复合材料是一类新颖的功能材料;MMOFs在磁性功能粒子的基础上结合了金属有机骨架材料的孔径均一、比表面积高、化学和热稳定性良好、吸附亲和力强等性能,在催化和环境等领域中显示出潜在的应用前景.本文简要概述了近年来制备的MMOFs复合材料,包括磁性微球核壳结构、磁性纳米颗粒镶嵌结构、磁性颗粒无规则互混结构、磁性石墨烯基复合结构;并从环境污染物的吸附、富集和催化降解角度,重点总结了MMOFs在环境分析和环境修复中的应用.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.