PET／PA66／液晶共聚酯酰胺共混体系的流变性能

采用ＳＥＭ１、热偏光显微研究了聚对苯二甲乙二酯（ＰＥＴ）／聚酰胺６６（ＰＡ６６）／热致液晶共聚酯酰胺（ＬＣ３０）三元共混物的形态结构;利用Ｉｎｓｔｒｏｎ３２１１型毛细管流变仪研究了共混物的流变性能,结果表明：ＰＥＴ／ＰＡ６６／ＬＣ３０共混物为一热力学不相容的多相聚合物体系,ＬＣ３０的加入提高了ＰＥＴ／ＰＡ６６的相容性,有效地改善了ＰＥＴ／ＰＡ６６共混物的流变性能,ＰＥＴ／ＰＡ６６／ＬＣ３０三元共混     

引入离子基团改善聚苯乙烯和热致液晶聚合物的相容性 Ⅰ热性能和形态

ＤＳＣ和ＳＥＭ研究结果表明聚苯乙烯（ＰＳ）与一种热致液晶聚合物（ＬＣＰ）（ＰＨＢ／ＰＥＴ（６０／４０）共聚酯）完全不相容．共混体系具有与组分无关的Ｔｇ，并且表现出明显的两相结构．将ＰＳ进行化学改性（引入磺酸基团）制备成磺化聚苯乙烯（ＳＰＳ），随中和盐离子的变化有：酸式、Ｌｉ、Ｎａ、Ｚｎ和Ｍｎ盐五种形式．用ＤＳＣ和ＳＥＭ对ＬＣＰ与ＳＰＳ共混物的热性能和形态进行了分析和表征．共混体系有一个与组成相关，且明显低于纯ＳＰＳ的Ｔｇ．这表明了ＰＳ与ＬＣＰ的相容性因为磺酸基团的引入而得到了改善．同时用Ｆｏｘ方程计算了ＬＣＰ的Ｔｇ．当ＳＰＳ含量较低时（不大于５０％）在各个共混体系中，所估算的ＬＣＰ的Ｔｇ相互吻合．表明共混体系满足Ｆｏｘ方程的前提条件，即ＬＣＰ与ＳＰＳ形成相容体系．当ＳＰＳ含量较低时（２５％），ＬＣＰ／ＳＰＳ的共混物为较均一体系，断面光滑；而ＳＰＳ含量较高时，在脆断面可以观察到纳米级的颗粒．电子能谱分析证明了这些颗粒是ＳＰＳ负离子的聚集体．     

新型液晶／高聚物复合膜的富氧性能及结构表征 Ⅱ．液晶／高聚物复合膜的结构表征

用ＩＲ、ＤＳＣ、ＷＡＸＤ、正交偏光显微镜、ＳＥＭ、ＴＥＭ等手段，表征了所合成的液晶／烃橡胶、硅橡胶三元共混复合膜的织态结构及液晶态转变，结果发现，液晶ＰＥＥＣＢ－４．０５由于与ＳＢＲ和ＰＤＭＳ共混，Ｔｋ－ｓ转变温度下降了３７．５℃，体系存在不完全的相分离，液晶ＰＥＥＣＢ－４．０５在体系中形成液晶富集区（ＬＣ－ｒｉｃｈ ｄｏｍａｉｎ），大小约０．２－２．２μｍ，在压力的作用下，连续的液晶富集区形成宽     

全芳香族热致液晶聚合物与热塑性树脂聚砜的原位复合材料

用自制的四种全芳香族热致液晶聚合物ＢＰ ＬＣＰ、ＢＰＭ ＬＣＰ、ＢＰＡ ＬＣＰ、ＢＰＳ ＬＣＰ与热塑性树脂聚砜（ＰＳＦ）熔融共混，制备了一系列原位复合材料．研究了所得材料的微观形态、热性能、力学性能等，结果显示：四种液晶聚合物中，ＢＰ ＬＣＰ，ＢＰＳ ＬＣＰ在所用加工条件下可在ＰＳＦ中取向成纤，而且这两种共混物断面上存在皮 核效应；ＢＰＭ ＬＣＰ和ＢＰＡ ＬＣＰ未成纤，均以球状存在于ＰＳＦ中．这四种液晶聚合物与ＰＳＦ的相容性较差，各共混物的Ｔｇ均分别接近于二纯组分的Ｔｇ值，ＳＥＭ照片上明显的相界面也能说明以上问题．液晶聚合物对ＰＳＦ有增强作用，但增强效果不很显著，这可能是二者相容性较差所致     

液晶共聚物与PSF原位复合的界面研究

合成了两种热致性液晶共聚酯ＢＰ—ＬＣＰ和ＳＤＰ—ＬＣＰ，对其熔融指数、取向性作了考察。选用基体聚砜（ＰＳＦ）与液晶共聚酯进行熔融共混，得原位复合材料。ＳＥＭ断口形态显示了两种液晶在基体中不同的成纤性，并显示出两相的不相容性。采用ＦＴ—ＩＲ方法分析了液晶共聚酯与ＰＳＦ界面间的分子相互作用。进一步研究发现在ＰＳＦ／ＢＰ－ＬＣＰ原位复合体系中加入含ＰＳＦ和ＢＰ－ＬＣＰ的嵌段共聚物，其相容性得以改善     

新型液晶／高聚物复合膜的富氧性能及结构表征 Ⅱ．液晶／高聚物复合膜的结构表征

用ＩＲ、ＤＳＣ、ＷＡＸＤ、正交偏光显微镜、ＳＥＭ、ＴＥＭ等手段，表征了所合成的液晶／烃橡胶／硅橡胶三元共混复合膜的织态结构及液晶态转变．结果发现，液晶ＰＥＥＣＢ—４．０５由于与ＳＢＲ和ＰＤＭＳ共混，Ｔｋ－ｓ转变温度下降了３７．５℃，体系存在不完全的相分离．液晶ＰＥＥＣＢ—４．０５在体系中形成液晶富集区（ＬＣ—ｒｉｃｈｄｏｍａｉｎ），大小约０２—２．２μｍ不等．在压力的作用下，连续的液晶富集区形成宽约７．０μｍ并垂直于膜的平面的通道．这些结果是第Ⅰ报中这类富氧膜透气率产生突变的根本原因．     

聚甲醛和尼龙12共混物的微观结构与动力学性能

采用ＳＥＭ，ＦＴ－ＩＲ，ＤＳＣ，ＷＡＸＤ等方法对ＰＯＭ／ＰＡ１２共混物的微观结构进行分析，并测试其力学性能，结果表明，在ＰＯＭ／ＰＡ１２共混物中，存在差氢键的相互作用。ＰＡ１２的加入，使ＰＯＭ的熔点下降，共混物的微晶尺寸Ｌ１１０及晶胞参数有所增大。微晶尺寸Ｌ１１０在１０．８７－１４．８９ｎｍ之间时，ＰＡ１２对ＰＯＭ具有增韧改性作用。     

尼龙1010分别与未接枝和接枝马来酸酐的高抗冲聚苯乙烯的共混体系研究

研究了尼龙１０１０（ Ｐ Ａ１０１０） 与高抗冲聚苯乙烯（ Ｈ Ｉ Ｐ Ｓ） 及马来酸酐官能化的 Ｈ Ｉ Ｐ Ｓ（ Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ） 间的相互作用,利用 Ｄ Ｓ Ｃ, Ｄ Ｍ Ａ, Ｓ Ｅ Ｍ 及拉伸测试等方法研究了不同组成比的共混物 Ｐ Ａ１０１０／ Ｈ Ｉ Ｐ Ｓ 与 Ｐ Ａ１０１０／ Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ 的结晶、玻璃化转变、形态及力学性能．结果表明 Ｈ Ｉ Ｐ Ｓ 与 Ｐ Ａ１０１０ 虽然结构相差甚远,但两者之间仍存在着一定的相互作用;而 Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ 可使 Ｐ Ａ１０１０ 的低温熔融峰变小,当 Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ 的含量≤５０ ％ 时,随着其含量的增加,共混物中 Ｐ Ａ１０１０ 的结晶温度升高;当含量＞ ５０ ％ 时, Ｐ Ａ１０１０ 发生分级结晶行为,其结晶温度由原来的１７８ ℃降至８３ ℃,同时 Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ 与 Ｐ Ａ１０１０ 间的相互作用变大, Ｄ Ｍ Ａ 谱上有明显的新的松驰峰． Ｐ Ａ１０１０／ Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ 共混体系的拉伸性能要优于相同组成的 Ｐ Ａ１０１０／ Ｈ Ｉ Ｐ Ｓ 体系．以上现象主要是由于 Ｈ Ｉ Ｐ Ｓ ｇ Ｍ Ａ 与 Ｐ Ａ１０１０ 中的端胺基发生了化学反应,产生了接枝共聚物 Ｐ Ａ１０１０ ｇ Ｈ Ｉ Ｐ     

热致液晶乙基纤维素与尼龙－1010共混物的研究

在自制单螺杆小型挤出机上通过熔融共混的办法，制备了不同配比（５／９５—２５／７５）的ＥＣ／Ｎｙｌｏｎ—１０１０共混物．用ＷＡＸＤ、ＤＳＣ、毛细管流变仪、力学性能测试等方法对共混物进行了研究．发现共混后尼龙－１０１０的形态结构有明显改变，其强度、模量都有提高，在高剪切速率下，共混物粘度大大降低．配比为１５８５时，这些性能的改进尤为明显．     

离聚物Surlyn对PBT/PP共混体系的力学性能及形态结构的影响

用力学性能测试、ＤＭＡ、ＳＥＭ等方法研究了离聚物Ｓｕｒｌｙｎ对ＰＢＴ／ＰＰ共混体系的力学性能及形态结构的影响。结果表明，在ＰＢＴ／ＰＰ共混体系中引入少量Ｓｕｒｌｙｎ可以改善界面的粘接性，从而改善其力学性能。当共混体系中ＰＢＴ／ＰＰ的组份比不变（９０／１０）且Ｓｕｒｌｙｎ的含量为６ｐｈｒ左右时，共混物的冲击强度出现极大值；而弯曲强度在Ｓｕｒｌｙｎ含量为１－２ｐｈｒ左右时有最大值。当共混体系中Ｓｕｒｌｙｎ的含量不变（６ｐｈｒ）时，其力学性能随ＰＰ含量的增加而下降。用玻璃纤维增强共混体系，可显著提高力学性能。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.