聚酰胺1010／聚乙烯－马来酸酐接枝共聚物共混物力学和热学性能研究

为了表明马来酸酐接枝聚烯烃后对聚酰胺的相容作用，本文研究了聚酰胺１０１０（ＰＡ１０１０）／聚乙烯－马来酸酐接枝共聚物（ＰＥ－ｇ－ＭＡＨ）共混物在不同ＭＡＨ接枝量下的结晶性与力学性能。研究表明，ＭＡＨ的存在导致ＰＥ－ｇ－ＭＡＨ－ｃｏ－ＰＡ１０１０共聚物的形成，而该共聚物在标题共混物中起着相容剂的作用。共混物的结晶性能变化显示了共混组分间存在一定程度的混溶性。在一定的ＭＡＨ含量内，标题共混物具有协同效应。     

尼龙6/多单体接枝聚丙烯共混物的形态结构及力学性能的研究

用多组分熔融接枝的方法将甲基丙烯酸缩水甘油酯（ Ｇ Ｍ Ａ） 和苯乙烯（ Ｓｔ） 共同接枝于聚丙烯（ Ｐ Ｐ） 上,制得多单体接枝聚丙烯 Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ） ．该接枝物具有高的 Ｇ Ｍ Ａ 接枝率．本研究利用 Ｆ Ｔ Ｉ Ｒ、 Ｓ Ｅ Ｍ、 Ｔ Ｅ Ｍ、 Ｄ Ｓ Ｃ 和力学性能测试等分析方法,研究了多组分熔融接枝聚丙烯（ Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ）） 对尼龙６／ Ｐ Ｐ 共混物的形态结构, Ｔｇ 和力学性能的影响．结果表明, Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ） 中的环氧基团与尼龙６（ Ｐ Ａ６） 末端的胺基发生化学反应,原位形成的 Ｐ Ｐ Ｐ Ａ６ 共聚物能有效的改善 Ｐ Ａ６ 与 Ｐ Ｐ 的相容性,可以使 Ｐ Ｐ 均匀的分散在 Ｐ Ａ６ 基体中,相区尺寸明显减小,提高了拉伸强度．由于两相的相容性较好,从而共混物的 Ｔｇ 有明显的变化．此外,通过透射电镜观察,发现 Ｐ Ａ６／ Ｐ Ｐ ｇ （ Ｇ Ｍ Ａ ｃｏ Ｓｔ）（７０／３０） 合金中存在着特殊的微相分离结构．     

刚性粒子增韧尼龙1010体系的研究

采用扫描电镜和动态力学等研究了在磺化聚苯乙烯（ＨＳＰＳ）作用下，尼龙１０１０（ＰＡ１０１０）／聚苯乙烯（ＰＳ）共混物的形态及相容性。结果表明，ＨＳＰＳ的加入显著改善了ＰＳ与ＰＡ１０１０的相容性，加强了界面粘结，使共混物缺口冲击明显提高，实现了ＰＳ增韧ＰＡ１０１０的目标。偏光显微竟结盟表明，ＨＳＰＳ的加入对共混物中ＰＡ１０１０的结晶形态有明显影响，使ＰＡ１０１０球晶细化且不完善。     

高密度聚乙烯与乙烯丙烯辛烯－1共聚物共混体系的相容性

用ＤＳＣ和ＷＡＸＤ方法研究了高密度聚乙烯／聚（乙烯丙烯辛烯－１）（ＨＤＰＥ／ＥＰＯ）共混体系的结晶性能。共混物的ＤＳＣ曲线皆呈单峰，表明共混体系形成了共晶。晶胞参数ａ及结晶度随共混物组成而变，进一步证明ＨＤＰＥ／ＥＰＯ共混体系的相容性．     

高密度聚乙烯与乙烯丙烯辛烯—1共聚物共混体系的相容性

用ＤＳＣ和ＷＡＸＤ方法研究了高密度聚乙烯／聚（乙烯丙烯辛烯－１）（ＨＤＰＥ／ＥＰＯ）共混体系的结晶性能。共混物的ＤＳＣ曲线皆呈单峰，表明共混体系形成了共晶。晶胞参数ａ及结晶度随共混物组成而变，进一步证明ＨＤＰＥ／ＥＰＯ共混体系的相容性。     

EVA增容PP/HDPE共混体系的形态结构与性能

采用乙烯－醋酸乙烯酯共聚物（ＥＶＡ）作为聚丙烯（ＰＰ）／高密度聚乙烯（ＨＤＰＥ）共混体系的增容剂,通过冲击实验、拉伸实验、示差量热扫描仪（ＤＳＣ）和扫描电镜（ＳＥＭ）,系统地研究了共混体系的性能与其形态结构之间的。结果表明,ＥＶＡ是ＰＰ／ＨＤＰＥ共混物较好物增容剂,ＥＶＡ可以使ＰＰ、ＨＤＰＥ的晶相结构受到一定程度的破坏,增加ＰＰ和ＨＤＰＥ的相容性,同时共混物的冲击韧性明显提高。     

POM／EVA共混物的研究

用力学测试、扫描电镜（ＳＥＭ）、热分析（ＤＳＣ）等手段研究了聚甲醛（ＰＯＭ）与乙烯－醋酸乙烯酯共聚物（ＥＶＡ）共混物（ＰＯＭ／ＥＶＡ）的力学性能及其微同形态；用聚甲醛与马来酸二丁酯（ＤＢＭ）的接枝物（ＰＯＭ－ｇ－ＤＢＭ）作相溶剂，能改变共的两相间的粘结力，从而提出了共混物的力学性能，ＳＥＭ观察表明接枝物的加入改变了ＰＯＭ／ＥＶＡ共混物的断裂方式，微观形态及结晶性能，对其热性能影响不大；通过改变ＰＯ     

聚乙烯串晶在单轴拉伸形变过程中的微结构变化和机理

本文采用电子显微镜和小角Ｘ－射线散射（ＳＡＸＳ）技术研究了含有串晶结构（Ｓｈｉｓｈ—ｋｅｂａｂ）的高密度聚乙烯（ＨＤＰＥ）／超高分子量聚乙烯（ＵＨＭＷＰＥ）共混物高取向膜在单轴拉伸过程中的微结构变化．深入探讨了拉伸温度对聚乙烯在形变过程中微结构变化的影响．室温拉伸时，聚乙烯串晶结构主要发生了解结晶过程；高温（１１５℃）形变时，主要表现为折叠链片晶直接转变为伸展链纤维晶的应变诱导结晶过程．     

甲基丙烯酸甲酯 - 甲基丙烯酸共聚物/梯形聚苯基硅倍半氧烷原位共混体系的性能研究

甲基丙烯酸甲酯 甲基丙烯酸共聚物（Ｐ（ＭＭＡ ＭＡＡ））与低分子量或高分子量梯形聚苯基硅倍半氧烷（ＰＰＳＱ）的共混物经原位聚合法制成．用光学透明法、荧光光谱、ＤＳＣ等技术研究了该共混体系的相容性及组分间的相互作用及结构转变．结果表明，当ＰＰＳＱ含量较小时，由于ＰＰＳＱ与Ｐ（ＭＭＡ ＭＡＡ）间存在着较强的氢键作用，该共混体系在一定配比下相容，且低分子量ＰＰＳＱ与Ｐ（ＭＭＡ ＭＡＡ）间的相容性较好．当ＰＰＳＱ的含量≤１％时，ＰＰＳＱ的加入对该共混物的Ｔｇ影响不大，但其Ｔｆ随ＰＰＳＱ含量增加而增大．此外，还测试了Ｐ（ＭＭＡ ＭＡＡ）／ＰＰＳＱ原位共混物的硬度及冲击强度．     

聚丙烯接枝马来酸酐及其离聚物的非等温结晶动力学

用 Ｄ Ｓ Ｃ 测定了固相接枝法制备的聚丙烯接枝马来酸酐（ Ｐ Ｐ ｇ Ｍ Ａ Ｈ） 及其３ 种５ 个离聚物在不同冷却速率的非等温结晶动力学．分析了结晶峰温（ Ｔｍａｘ） 、结晶起始温度（ Ｔ０） 、结晶峰的初始斜率（ Ｓｉ） 及结晶峰的半高宽（ Δｗ ） 等结晶峰参数;用 Ａｖｒａｍｉ 方程和综合了 Ａｖｒａｍｉ Ｏｚａｗａ 方程的方法处理非等温结晶动力学．对于全部样品在所有的冷却速率下, Ａｖｒａｍｉ 指数ｎ 值均在２５ ～２８ 之间,说明聚丙烯结晶行为没有改变;但同时发现接枝及离子化后,成核速率加快,晶粒分布变窄,结晶总速率增大,与等温结晶动力学得到的结论一致．     

剪切作用下马来酸酐接枝乙烯-辛烯共聚物和乙烯-丙烯酸丁酯-甲基丙烯酸缩水甘油酯共聚物对PA1010/PP共混物的增容作用比较

采用熔体共混的方法制备了两种增容剂增容的聚酰胺1010/聚丙烯(PA1010/PP)共混物,通过扫描电镜(SEM)、力学性能和差示扫描量热(DSC)测试,对动态保压注射成型(动态)和普通注射成型(静态)中增容剂POE-g-MAH(马来酸酐接枝乙烯-辛烯共聚物)和PTW(乙烯-丙烯酸丁酯-甲基丙烯酸缩水甘油酯共聚物)对PA1010/PP共混物的增容作用进行了比较研究.研究结果表明,普通注射成型中,PTW增容体系具有更小的分散相粒子,在DSC测试中出现两个结晶峰,即出现异相成核结晶和均相成核结晶,具有更好的拉伸和冲击性能,增容作用更佳.动态保压注射成型中施加剪切可以提高所有共混物的拉伸强度、拉伸模量和缺口冲击强度,PTW和POE-g-MAH两种增容剂增容体系冲击性能相近,但POE-g-MAH增容体系的分散相相区尺寸减小明显、分布均匀性显著增加,材料冲击强度增加幅度更大,表明剪切更有利于POE-g-MAH增容作用的进行.两种增容剂增容作用的不同源于它们化学组成的不同引起的材料形态差别.     

显微镜图像分析研究聚丙烯/尼龙1010共混物相结构及其性能

用扫描电子显微镜图像分析研究了聚丙烯/聚酰胺1010共混物及其部分相容体系的相形态结构,计算了表征相结构和尺寸的结构参数,如分散相的平均直径、平均弦长和分散相的质心相关距等.并分别讨论了聚丙烯/聚酰胺1010共混物及其部分相容体系的相形态以及其结构参数与共混物组成的关系.测定了聚合物及其共混物体系的力学性能,讨论了共混物组成与力学性能的关系.聚丙烯/聚酰胺1010共混物的拉伸模量与组成的关系较为复杂,但其部分相容体系的拉伸模量与组成呈线性关系.聚丙烯/聚酰胺1010及其共混物体系的屈服强度与共混物组成均呈线性关系.表征相结构的两相平均弦长比(l-1/-l2)与组成以及共混物体系力学性能与组成的关系,二者相似.同时讨论了体系力学性能随相尺寸等的变化规律.     

Crystallization Kinetics and Melting Behavior of PA1010/Ether-based TPU Blends

Polyamide 1010(PA1010)/thermoplastic poly(ether urethane) elastomer(ether-based TPU) blends were prepared via melt extrusion. The crystallization kinetics and melting behavior of PA1010/ether-based TPU blends were systematically investigated using differential scanning calorimetry. The crystallization kinetics results show that the addition of ether-based TPU hinders the crystallization of PA1010, and the hindrance effect increases with the increase of the concentration of ether-based TPU. Both pure PA1010 and PA1010/ether-based TPU blends exhibit double melting peaks in the process of nonisothermal crystallization. The double melting peaks change differently with the variation of cooling rate and blend composition. The cooling rate only influences the lower melting peak; however, the blend composition influences not only the lower melting peak but also the higher melting peak. The reason for the phenomenon must be the interaction between the two compositions.     

Thermal properties and crystalline structure of syndiotactic polystyrene‐based miscible blends

This work examined the effect of the pre‐melting temperature (T_max) on the thermal properties and crystalline structure of four miscible syndiotactic polystyrene (sPS)‐based blends containing 80 wt % sPS. The counterparts for sPS included a high‐molecular‐weight atactic polystyrene [aPS(H)], a medium‐molecular‐weight atactic polystyrene [aPS(M)], a low‐molecular‐weight atactic polystyrene [aPS(L)], and a low‐molecular‐weight poly(styrene‐co‐α‐methyl styrene) [P(S‐co‐αMS)]. According to differential scanning calorimetry measurements, upon nonisothermal melt crystallization, the crystallization of sPS shifted to lower temperatures in the blends, and the shift followed this order of counterpart addition: P(S‐co‐αMS) > aPS(L) > aPS(M) > aPS(H). The change in T_max (from 285 to 315 °C) influenced the crystallization of sPS in the blends to different degrees, depending on the counterpart's molecular weight and cooling rate. The change in T_max also affected the complex melting behaviors of pure sPS and an sPS/aPS(H) blend, but it affected those of the other blends to a lesser extent. Microscopy investigations demonstrated that changing T_max slightly affected the blends' crystalline morphology, but it apparently altered that of pure sPS. Furthermore, the X‐ray diffraction results revealed that the α‐form sPS crystal content in the blends generally decreased with an increase in T_max, and it decreased with a decrease in the cooling rate as well. The blends showed a lower α‐form content than pure sPS; a counterpart of a lower molecular weight more effectively reduced the formation of α‐form crystals. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2798–2810, 2006     

The effects of melt annealing and counterpart's molecular weight on the thermal properties and phase morphology of poly(L‐lactide)‐based blends

The thermal properties and phase morphology of poly(L ‐lactide) (PLLA)‐based blends have been studied. Two poly(ethylene glycol)s (PEGs) with molecular weight (MW) of about 1,500 (1.5k) g/mol and 2,000,000 (2M) g/mol, respectively, were used as counterparts. The blends were annealed at a preselected temperature of 200 °C for either 2 min or 30 min before the characterizations. Both PEGs were determined to enhance the crystallizability of PLLA. After a 2‐min process of annealing, the PEG(1.5k)'s crystallization efficiency on PLLA has been noted to increase with the increase of its content. Conversely, PEG(2M)'s crystallization efficiency declined with the increase of its content. Extending the annealing time has evidently changed the PEGs' crystallization effect on PLLA. Moreover, the PEG(1.5k) has, to a greater extent, brought about the depression of PLLA's melting temperature by increasing its content, and this depression increased with the annealing time. The blends exhibited lower thermal stability than those of the parent components, particularly for the PEG(1.5k)‐included system with a higher PEG content. Regardless of the annealing time, the PEG(1.5k)‐included blends have shown homogeneous melt morphology under light microscope, whereas the PEG(2M)‐included blends have displayed phase‐separated melt morphology. In addition to the composition, PEG's MW and annealing time influence the crystalline morphology of the blends. The ringed PLLA spherulites have appeared mostly in the 2‐min annealed PEG(1.5k)‐included blends. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1497–1510, 2009     

离子聚合物在Nylon－1010／PP共混物中的增容作用

离子聚合物在Ｎｙｌｏｎ－１０１０／ＰＰ共混物中的增容作用曲桂杰，刘景江（中国科学院长春应用化学研究所长春１３００２２）关键词聚丙烯，Ｎｙｌｏｎ－１０１０，离子聚合物，增容选择离子聚合物作为高聚物共混的增容剂，通过离子间的相互作用可达到增容效果［１］。...     

甲基丙烯酸甲酯-苯乙烯无规共聚物与聚偏氟乙烯共混体系的结晶行为和力学性能

本文研究了甲基丙烯酸甲酯-苯乙烯(MS)无规共聚物与聚偏氟乙烯(PVF_2)共混体系的结晶行为和力学性能。MS含量及MS中St的含量均对PVF_2的结晶行为有较大的影响,它显示出非晶材料向结晶材料转变过程中所特有的力学性质不连续现象。研究结果表明了PVF_2/MS共混物作为一种改性材料应用的可能性。     

Effect of EVM/EVA‐g‐MAH ratio on the structure and properties of nylon 1010 blends

The nylon 1010/ethylene‐vinyl acetate rubber (EVM)/maleated ethylene‐vinyl acetate copolymers (EVA‐g‐MAH) ternary blends were prepared. The effect of EVM/EVA‐g‐MAH ratio on the toughness of blends was examined. A super tough nylon 1010 blends were obtained by the incorporation of both EVM and EVA‐g‐MAH. Impact essential work of fracture (EWF) model was used to characterize the fracture behavior of the blends. The nylon/EVM/EVA‐g‐MAH (80/15/5) blend had the highest total fracture energy at a given ligament length (5 mm) and the highest dissipative energy density among all the studied blends. Scanning electron microscopy images showed the EVM and EVA‐g‐MAH existed as spherical particles in nylon 1010 matrix and their size decreased gradually with increasing EVA‐g‐MAH content. Large plastic deformation was observed on the impact fracture surface of the nylon/EVM/EVA‐g‐MAH (80/15/5) blend and related to its high impact strength. Then with increasing EVA‐g‐MAH proportion, the matrix shear yielding of nylon/EVM/EVA‐g‐MAH blends became less obvious. EVM and EVA‐g‐MAH greatly increased the apparent viscosity of nylon 1010, especially at low shear rates. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 877–887, 2009     

sPS/PET/SsPS-H共混体系的研究

以自制间规聚苯乙烯(sPS)功能化合成的磺化间规聚苯乙烯（SsPS-H)作相容剂,研究其对sPS/PET共混物微相结构与性能的影响,发现SsPS-H能够有效地改善二者的相容性,当sPS/PET/SsPS-H为85／15／2（重量比）时,冲击强度达到11．4kJ/m^2,为纯sPS的3倍,此时材料的弯曲强度为39．1MPa,下降约8％;DMA结果表明,随SsPS-H用量的增加,共混物的Tg逐渐提高;DSC分析结果表明,共混体系中sPS的熔点不受SsPS-H含量的影响,而PET的熔点在加入6份SpPS-H时明显降低。sPS在达到最大结晶速率的温度均随SsPS-H用量的增加先提而后下降。SEM观察到加入SsPS-H后,PET分散相的尺寸减小,且均匀程度增加,共混物室温下冲击断裂显著地由脆性转变为韧性,当加入6份SsPS-H后,冲击断裂又出现脆性。