叠氮化物及其苯并衍生物的研究概况

本文对叠氮化物及其衍生物的研究进展作了阐述，对叠氮基团的结构进行了探讨，指出脂肪族叠氮化物的性能和芳香族叠氮化物脱氮环化生成苯并氧化呋咱这种叠氮衍生物的特征。     

电负性均衡

电负性是分子中一个原子把电子拉向它自身的能力,是化学理论的基本概念之一。继Pauling建立第一个电负性标度后,提出了众多的电负性标度。只是在密度泛函理论的基础上,电负性概念和电负性均衡原理,才被精密地论证。近二十多年来,电负性理论的重要发展是:应用电负性均衡模型或方法,可以快速地计算分子体系的电荷分布,从而确定分子的其他性质,甚至包括分子的结构和反应性指标。通常的电负性均衡方法只把分子划分到原子区域,虽然简单直观,但其精度和应用范围受到限制。原子与键电负性均衡方法,把分子划分到包括原子区域、化学键区域和孤对电子区域,能够较快速精密地计算分子的电荷分布和其他性质,并被应用到构建新一代可极化或浮动电荷力场的探索中,有广阔的应用前景。     

金属材料分析方法的选择和施行第六讲金属材料中稀土元素的测定(续)

表6-21稀土(Ⅲ)与CPAⅢ的α型螯合物的光吸收特性在强酸性溶液中因质子化而可能出现以下两种形式上:式中R为-AsO目前,在成熟的分析方法中常用的试剂有偶氮氯膦-pN,偶氮氯膦-mN,偶氮氯膦-mA等几种。具有不对称结构的变色酸双偶氮类显色剂的优良分析性能与其分子结构有关。此类试剂在分子结构上的不对称性,使分子两端电子云分布不均匀且易于极化;在试剂分子中引入了电负性较大的助色基团,导致产生强烈的诱导效应,例如在偶氮氯膦型试剂的分子中,-PO3H2为较强的成盐基团,在-PO3H2基团的间位上,也就是在偶氮基的对位上引入了电负性较强的氯…     

密度泛函理论下的分子电负性——Ⅵ.原子键电负性均衡模型

以密度泛函理论和电负性均衡原理为基础 ,将体系的单电子密度分割为原子的单电子密度和键的单电子密度 ,得到了分子总能量、分子中原子以及键的有效电负性的表达式 .基于这些表达式 ,提出了直接计算体系的总能量和体系中电荷分布的新方法 .此模型比其他电负性均衡方法更合理 .对大量分子的总能量和电荷分布所进行的计算结果表明所提出的原子 键电负性均衡模型是可行的 ,可以应用于确定各类生物和有机大分子的总能量和电荷分布 ,给出较EEM和MEEM模型更近于从头计算的结果     

1,3-偶极环加成反应合成1-(取代苄基)-1,2,3-三唑类化合物

利用苄氯和取代苄氯与叠氮化钠的亲核取代反应合成了一系列苯环上带有不同取代基团的苄基叠氮化合物,亲核取代反应速率受苯环上取代基的影响:吸电子基团的存在,可以促使反应更容易进行.合成的叠氮化合物与苯乙炔经1,3-偶极环加成反应得到了相应的取代苄基1,2,3-三唑类化合物,反应条件温和.这些1,2,3-三唑类目标化合物具有对热稳定的优点.用红外、核磁、元素分析、质谱等对合成的叠氮化合物和1,2,3-三唑类化合物的结构进行了表征,重点研究了1,3-环加成反应的规律.加成反应速率取决于叠氮化合物(偶极物)的极性,即与取代基的电负性有关:苯乙炔(亲偶极物)易于与缺电子的叠氮反应,反之亦然.同时在反应过程中观察到空间位阻效应:反应可以生成两种同分异构体,其中4-苯基-1,2,3-三唑是主要产物.     

不同分子环境中甲基的电负性研究

建立了不同分子环境中甲基中心碳原子电负性的计算模型, 计算了一些常见的CH~3-Z分子模型中甲基中心碳原子的电负性。结果表明:不同分子环境中的甲基具有不同的诱导效应参数, 该参数表现出规律性, 并可用于结构-性能的相关分析。     

预测环加成反应区域选择性的一个简易方法

长期以来,我们一直在研究化合物的性能与结构关系的定量化问题,其目的是为了寻求一个定量确定反应物反应活性的简易方法。本文研究了一种确定环加成反应区域选择性的新方法。早在七十年代初期,对于环加成反应的区域选择性问题就有报导,可以通过分子轨道法等加以确定。但是,应用分子轨道法的计算程序过于繁琐,所以应用并不广泛。1989年,S.K.Pal提出了处理这个问题的一个方程,即可以通过活性中心原有的电负性进行推算。这种原有的电负性可以用Huheey方法计算,但是这种计算方法在应用中仍然是相当复杂     

学习化学元素的电负性的体会

在学习化学元素电负性的概念、化合物的键型和元素的化学活泼性等问题中,我有一些学习心得,现归纳如下: 1.电负性的定义和计算方法L.Pauling在1932年首先提出电负性的概念.元素的电负性就是“元素的原子在化合物分子中把电子吸引向自己的能力”.计算电负性的方法有下列四种: (1)Pauling的热化学方法Pauling     

Sanderson电负性模型在Keggin型杂多化合物催化体系上的应用

根据Keggin型杂多化合物的分子式,采用Sand-erson 电负性模型,可较容易地计算出化合物分子的平均电负性和其组成原子的分电荷。在同系列化合物中,金属原子的分电荷与 M=O,M—O一M(M=Mo,W)键的振动频率,催化剂的催化活性线性相关。此种关系     

关于电负性均恒原理

9分子中某原子实际所具有的电负性, 可确定如下:计算结果表明, 据电负性均恒原理分子中一个键两边的基甲电负性相等, 并不是分子中所有原子的电负性都会相等.     

Photolysis of bromo- and chloro-substituted benzyl derivatives. Competition between ionic and radical pathways

Photolysis of 1-fluoro-2-halo-1,2-diphenylethanes was studied in solutions of tetrahydrofuran, acetonitrile, and cyclohexane. The effect of free radical inhibitor and metal hydrides on products formation as well as their ratio was analyzed to elucidate the reaction pathway. In the first step homolytic C-X bond cleavage occurs from a single excited state, resulting in a biradical pair. Further reaction path depends on the type of the halogen bonded and on the solvent polarity. Electron transfer within the radical pair cage is apparently more rapid for bromides than for chlorides and is opposite as expected on the basis of the relative electronegativities of chlorine and bromine. As radicals approach each other, they fall into ionic or radical product channels. This is influenced by solvent polarity, resulting in the larger yield of ionic products in the case of acetonitrile as in the case of less polar cyclohexane.     

Developments on the Chemistry of Tellurium and Selenium Azides

Abstract

We have been carrying out systematic studies on the preparation and properties of tellurium halide and pseudohalide compounds with a focus on tellurium azides. We were successful in the synthesis of various tellurium azides of both covalent and ionic nature. Several tellurium(IV) azides, tellurium(II) azides, and the first tellurium(VI) azides can be prepared in reasonable amounts. The first structural information of selenium azides is obtained for covalent and ionic derivatives, and spectroscopic data for the existence of selenium(iv) polyazides.     

Preparation of polyfunctional acyl azides

A general synthesis of acyl azides from the corresponding N-acyl benzotriazoles is described. The procedure affords acyl azides in good yields and avoids the use of acid activators and NO+ equivalents typically employed to synthesize these compounds from acid chlorides and hydrazides, respectively.     

Glycosylthiomethyl chloride: a new species for S-neoglycoconjugate synthesis. Synthesis of 1-N-glycosylthiomethyl-1,2,3-triazoles

Reaction of O-acyl-protected glycosylthiols with dichloromethane afforded readily glycosylthiomethyl chlorides, which gave with sodium azide the corresponding glycosylthiomethyl azides 17-22. Reaction of these azides with dicyclopentadiene as dipolarophile led to tandem 1,3-dipolar cycloaddition/retro-Diels-Alder reaction furnishing the parent 1-glycosylthiomethyl-1,2,3-triazoles 23-25. Reaction of azides with acetylene derivatives gave directly 1-glycosylthiomethyl-1,2,3-triazoles which are ring-substituted.     

Liquid azide salts and their reactions with common oxidizers IRFNA and N2O4

Several imidazolium-based ionic liquid azides with saturated and unsaturated side chains were prepared, and their physical and structural properties were investigated. The reactivity of these new as well as some previously reported ionic liquid azides with strong oxidizers, N 2O 4 and inhibited, red-fuming-nitric acid (IRFNA), was studied.     

A facile approach to polysubstituted pyrazoles from hydrazonyl chlorides and vinyl azides

A novel and facile approach to polysubstituted pyrazoles from readily synthesized hydrazonyl chlorides and vinyl azides was developed. The reaction was regiospecific and proceeded under mild conditions in the presence of base.     

Synthesis and ring closure reactions of pyrido[3,2,1‐jk]carbazol‐6‐ones

4‐Hydroxy‐5‐phenylpyrido[3,2,1‐jk]carbazol‐6‐ones ( 4, 5 ), which were obtained from carbazoles 1 and malonates 2 or 3 , were converted to reactive intermediates such as 4‐chlorides 9 or 4‐tosylates 10 , which gave in turn 4‐azido‐5‐phenyl derivatives 11 . 5‐Alkyl‐4‐azides 11 were not obtained in this manner; however a new one‐pot azidation reaction was developed starting from 4‐hydroxy derivatives 4 which gave azides 11 in good yields. 4‐Azido‐5‐phenyl derivative 11f cyclized on thermolysis to the indole 12 . The thermal behaviour of the azides 11 was studied by thermoanalytical methods (DSC).     

Chemistry of Azobenzazole Systems. 3. Reactions of 2-Hydrazinobenzoxazole with Carbonyl Compounds

The reaction of 2-hydrazinobenzoxazole with various carbonyl compounds was studied. Only the corresponding azides were obtained with acylating agents such as acid anhydrides and acid chlorides and products with a fused triazole ring were not obtained. Only the corresponding hydrazones were obtained from furfural and 2-carboxy-3,4-dimethoxybenzaldehyde.     

Copper-catalyzed one-pot synthesis of tetrasubstituted pyrazoles from sulfonyl azides,terminal alkynes,and hydrazonoyl chlorides

Ketenimine intermediates generated by the addition of copper acetylides to sulfonyl azides are trapped by nitrile imines (generated from hydrazonoyl chlorides and triethylamine) to afford tetrasubstituted pyrazoles in moderate to good yields.     

Liquid azide salts

Ionic liquid azides from azidoethyl, alkyl, and alkenyl substituted derivatives of 1,2,4- and 1,2,3-amino-triazoles were prepared and examined for the first time to investigate their structural and physical properties. All reported salts possess melting points below 100 degrees C. The unique character of these newly discovered ionic liquid azides is based upon the fact that these molecules are not simple protonated salts like previously reported substituted hydrazinium azides. The presence of quaternary nitrogen confers both thermal stability and negligible volatility.