Ho(NO3)3(C2H5O2N)4·H2O的低温热容和热力学函数

合成了稀土(钬, Ho)-氨基酸(甘氨酸, C₂H₅O₂N)二元配合物Ho(NO₃)₃(C₂H₅O₂N)₄·H₂O, 并且通过化学分析、元素分析和红外(IR)光谱对配合物进行了表征. 用高精度全自动绝热量热仪, 测定了该配合物在80-390 K温度区间的定压摩尔热容(C_p,m). 利用实验测定的热容数据, 采用最小二乘法, 将热容曲线上热容峰以外的两段平滑区的摩尔热容对折合温度进行拟合, 建立了热容随折合温度变化的多项式方程. 根据热容与焓、熵的热力学关系,计算出了配合物在80-390 K温度区间内,每隔5 K,相对于298.15 K的摩尔热力学函数(H_T,m-H_298.15,m)和(S_T,m-S_298.15,m). 通过热容曲线分析, 计算出了350 K附近转变过程的焓变(Δ_trsH_m)和熵变(Δ_trsS_m). 用差示扫描量热法(DSC)测定了配合物的热稳定性.     

配合物Zn(Met)SO4•H2O(s)的低温热容和标准摩尔生成焓

利用精密自动绝热热量计直接测定了配合物Zn(Met)SO₄•H₂O(s) 在78～370 K温区的摩尔热容. 通过热容曲线的解析得到该配合物的起始脱水温度为T₀＝329.50 K. 将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容 (C_p,m)对温度(T)的多项式方程, 并且在此基础上计算出了它的舒平热容值和各种热力学函数值. 依据Hess定律, 通过设计热化学循环, 选择体积为100 cm³、浓度为2 mol•L^－1的盐酸作为量热溶剂, 利用等温环境溶解-反应热量计, 测定和推算出该配合物的标准摩尔生成焓为Δ_fH_m⁰＝－(2069.30±0.74) kJ•mol^－1.     

抗衡阴离子PF6-调控的1, 3-丙二胺缩邻香兰素镧(Ⅲ)配合物的合成和晶体结构

通过柔性配体1, 3-丙二胺缩邻香兰素(H₂L)与和La(NO₃)₃·6H₂O反应, 合成了1个由2个H₂L桥连的双核稀土配合物[La₂(NO₃)₆(H₂L)₂] ·CH₂Cl₂ (1), 该配合物与(NH₄)(PF₆)继续反应生成了1个由2个NO₃^-离子桥连的双核配合物[La₂(NO₃)₂(H₂L)₄] (PF₆)₄·4H₂O·2CH₂Cl₂ (2), X-射线单晶衍射分析确定了2个配合物的晶体结构。配合物1和2为结构完全不同的2个双核结构, 因抗衡阴离子PF₆^-有去阴离子的作用, 配合物1中的NO₃^-离子被配体取代, 导致配合物1的结构翻转, 形成了1个新颖的双核结构2。     

稀土配合物[Pr(C3H7NO2)2(C3H4N2)(H2O)](ClO4)3的标准生成焓及热分解动力学研究

合成了高氯酸镨和咪唑(C₃H₄N₂), DL-α-丙氨酸(C₃H₇NO₂)混配配合物晶体. 经傅立叶变换红外光谱、化学分析和元素分析确定其组成为[Pr(C₃H₇NO₂)₂(C₃H₄N₂)(H₂O)](ClO₄)₃. 使用具有恒温环境的溶解-反应量热计, 以2.0 mol•L^－1 HCl为量热溶剂, 在T＝(298.150±0.001) K时测定出化学反应PrCl₃•6H₂O(s)＋2C₃H₇NO₂(s)＋C₃H₄N₂(s)＋3NaClO₄(s)＝[Pr(C₃H₇NO₂)₂(C₃H₄N₂)(H₂O)](ClO₄)₃(s)＋3NaCl(s)＋5H₂O(1)的标准摩尔反应焓为Δ_rH_m^ө＝(39.26±0.11) kJ•mol^－1. 根据盖斯定律, 计算出配合物的标准摩尔生成焓为Δ_fH_m^ө{[Pr(C₃H₇NO₂)₂(C₃H₄N₂)(H₂O)](ClO₄)₃(s), 298.150 K}＝(－2424.2±3.3) kJ•mol^－1. 采用TG-DTG技术研究了配合物在流动高纯氮气(99.99%)气氛中的非等温热分解动力学, 运用微分法(Achar-Brindley-sharp和Kissinger法)和积分法(Satava-Sestak和Coats-Redfern法)对非等温动力学数据进行分析, 求得分解反应的表观活化能E＝108.9 kJ•mol^－1, 动力学方程式为dα/dt＝2(5.90×10⁸/3)(1－α)[－ln(1－α)]^－1exp(－108.9×10³/RT).     

稀土高氯酸盐-谷氨酸配合物[Pr2(L-α-Glu)2(ClO4)(H2O)7](ClO4)3•4H2O的低温热容和热化学研究

合成了一种稀土高氯酸盐-谷氨酸配合物. 经TG/DTG、化学和元素分析、FTIR及与相关文献对比, 确定其组成为[Pr₂(L-α-Glu)₂(ClO₄)(H₂O)₇](ClO₄)₃•4H₂O, 纯度为99.0%以上. 利用显微熔点仪分析发现其没有熔点. 在78～370 K温区, 用精密绝热量热仪测量其低温热容, 在285～306 K温区发现一明显吸热峰, 归结为固-固相变过程. 通过相变温区三次重复热容测量, 得到相变温度T_tr、相变焓Δ_trH_m和相变熵Δ_trS_m分别为(297.158±0.280) K, (12.338±0.016) kJ•mol^－1和(41.520±0.156) J•K^－1•mol^－1. 用最小二乘法将非相变温区的热容对温度进行拟合, 得到了热容随温度变化的两个多项式方程. 用此方程进行数值积分, 得到每隔5 K的舒平热容值和相对于273.15 K的热力学函数值. 根据TG/DTG结果, 推测了该配合物的热分解机理. 依据Hess定律, 选择1 mol•dm^－3盐酸为量热溶剂, 利用等温环境溶解-反应量热计, 测定了该配合物的标准摩尔生成焓为: Δ_fH_m⁰＝－(7223.1±2.4) kJ•mol^－1.     

稀土配合物[Pr(C3H7NO2)2(C3H4N2)(H2O)](ClO4)3的标准生成焓及热分解动力学研究

合成了高氯酸镨和咪唑(C₃H₄N₂), DL-α-丙氨酸(C₃H₇NO₂)混配配合物晶体. 经傅立叶变换红外光谱、化学分析和元素分析确定其组成为[Pr(C₃H₇NO₂)₂(C₃H₄N₂)(H₂O)](ClO₄)₃. 使用具有恒温环境的溶解-反应量热计, 以2.0 mol•L^－1 HCl为量热溶剂, 在T＝(298.150±0.001) K时测定出化学反应PrCl₃•6H₂O(s)＋2C₃H₇NO₂(s)＋C₃H₄N₂(s)＋3NaClO₄(s)＝[Pr(C₃H₇NO₂)₂(C₃H₄N₂)(H₂O)](ClO₄)₃(s)＋3NaCl(s)＋5H₂O(1)的标准摩尔反应焓为Δ_rH_m^ө＝(39.26±0.11) kJ•mol^－1. 根据盖斯定律, 计算出配合物的标准摩尔生成焓为Δ_fH_m^ө{[Pr(C₃H₇NO₂)₂(C₃H₄N₂)(H₂O)](ClO₄)₃(s), 298.150 K}＝(－2424.2±3.3) kJ•mol^－1. 采用TG-DTG技术研究了配合物在流动高纯氮气(99.99%)气氛中的非等温热分解动力学, 运用微分法(Achar-Brindley-sharp和Kissinger法)和积分法(Satava-Sestak和Coats-Redfern法)对非等温动力学数据进行分析, 求得分解反应的表观活化能E＝108.9 kJ•mol^－1, 动力学方程式为dα/dt＝2(5.90×10⁸/3)(1－α)[－ln(1－α)]^－1exp(－108.9×10³/RT).     

配合物Zn(Met)SO4·H2O(s)的低温热容和标准摩尔生成焓

利用精密自动绝热热量计直接测定了配合物Zn(Met)SO4·H2O(s)在78～370K温区的摩尔热容.通过热容曲线的解析得到该配合物的起始脱水温度为T0=329.50K.将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp,m)对温度(T)的多项式方程,并且在此基础上计算出了它的舒平热容值和各种热力学函数值.依据Hess定律,通过设计热化学循环,选择体积为100cm3、浓度为2mol·L-1的盐酸作为量热溶剂,利用等温环境溶解-反应热量计,测定和推算出该配合物的标准摩尔生成焓为?fHms=-(2069.30±0.74)kJ·mol-1.     

复盐K2Zn(IO3)4·2H2O的热化学研究

The standard enthalpy of formation (Δ_fH^?_m［K₂Zn(IO₃)₄·2H₂O,s,298.2K］=-2210.68 kJ·mol^-1) of a double salt K₂Zn(IO₃)₄·2H相似文献   

N,N′-双(2-吡啶乙基)二硫代草酰胺根桥联的异三核锰(Ⅱ)铜(Ⅱ)锰(Ⅱ)、镍(Ⅱ)铜(Ⅱ)镍(Ⅱ)和三核镍(Ⅱ)配合物的合成及性质

以取代的二硫代草酰胺根作为桥联配体, 合成了3种新的三核镍配合物[Ni₃(Ped)₂](ClO₄)₂(H₂O) (1)、[Ni₃(Ped)₂](NO₃)₂(H₂O) (2)和[Ni₃(Ped)₂](Ac)₂(H₂O)₂ (3),及2种新的异三核铜镍和铜锰配合物[CuNi₂(Ped)₂](NO₃)₂(H₂O)₂ (4)和[CuMn₂(Ped)₂](NO₃)₂(H₂O)₂ (5) (H₂Ped =N,N′-双(2-吡啶乙基)二硫代草酰胺)。通过元素分析、红外光谱、紫外可见光谱、电导、电子顺磁共振谱等对配合物进行了表征，对配合物进行了热分析。测定了配合物(5)的变温磁化率，研究了配合物(5)中Cu(Ⅱ)-Mn(Ⅱ)离子间的磁相互作用，结果表明在Cu(Ⅱ)-Mn(Ⅱ)离子间的磁相互作用具有高自旋基态的非正规自旋态性质。     

稀土高氯酸盐-缬氨酸配合物[Sm2(L-α-Val)4(H2O)8](ClO4)6的低温热容和热化学研究

以高氯酸钐和缬氨酸为原料在蒸馏水中合成了一种稀土高氯酸盐-缬氨酸配合物[Sm₂(L-α-Val)₄(H₂O)₈](ClO₄)₆。利用TG/DTG、化学和元素分析、FTIR等技术表征了配合物的结构,确定其组成为：[Sm₂(L-α-Val)₄(H₂O)₈](ClO₄)₆。用精密绝热量热仪测量了它在78~371 K温区的热容,用最小二乘法将该温区的热容对温度进行拟合,得到了热容随温度变化的多项式方程。用此方程进行数值积分,得到每隔5 K的舒平热容值和相对于298.15 K的热力学函数值。根据TG/DTG结果,推测了该配合物的热分解机理。另外,依据Hess定律,通过设计合理的热化学循环,利用等温环境溶解-反应热量计分别测量量热反应的反应物和产物在所选溶剂中的溶解焓,从而确定反应的反应焓为：Δ_rH_m^?=(24.83±0.85) kJ·mol^-1。最后,利用反应的反应焓和其它反应物和产物已知的热力学数据计算出配合物的标准摩尔生成焓为：-(8 010.01± 3.90) kJ·mol^-1。     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Low-temperature heat-capacity and standard molar enthalpy of formation of copper l-threonate hydrate Cu(C4H6O5)·0.5H2O(s)

The solid copper l-threonate hydrate, Cu(C₄H₆O₅)·0.5H₂O, was synthesized by the reaction of l-threonic acid with copper dihydrocarbonate and characterized by means of chemical and elemental analyses, IR and TG-DTG. Low-temperature heat-capacity of the title compound has been precisely measured with a small sample precise automated adiabatic calorimeter over the temperature range from 77 to 390 K. An obvious process of the dehydration occurred in the temperature range between 353 and 370 K. The peak temperature of the dehydration of the compound has been observed to be 369.304 ± 0.208 K by means of the heat-capacity measurements. The molar enthalpy, Δ_dH_m, of the dehydration of the resulting compound was of 16.490 ± 0.063 kJ mol⁻¹. The experimental molar heat capacities of the solid from 77 to 353 K and the solid from 370 to 390 K have been, respectively, fitted to tow polynomial equations with the reduced temperatures by least square method. The constant-volume energy of combustion of the compound, Δ_cU_m, has been determined as being −1616.15 ± 0.72 kJ mol⁻¹ by an RBC-II precision rotating-bomb combustion calorimeter at 298.15 K. The standard molar enthalpy of formation of the compound, , has been calculated to be −1114.76 ± 0.81 kJ mol⁻¹ from the combination of the data of standard molar enthalpy of combustion of the compound with other auxiliary thermodynamic quantities.     

Low-temperature heat capacity and standard enthalpy of formation of neodymium glycine perchlorate complex [Nd2(Gly)6(H2O)4](ClO4)6·5H2O

Rare-earth perchlorate complex coordinated with glycine [Nd₂(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O was synthesized and its structure was characterized by using thermogravimetric analysis (TG), differential thermal analysis (DTA), chemical analysis and elementary analysis. Its purity was 99.90%. Heat capacity measurement was carried out with a high-precision fully-automatic adiabatic calorimeter over the temperature range from 78 to 369 K. A solid-solid phase transformation peak was observed at 256.97 K, with the enthalpy and entropy of the phase transformation process are 4.438 kJ mol⁻¹ and 17.270 J K⁻¹ mol⁻¹, respectively. There is a big dehydrated peak appears at 330 K, its decomposition temperature, decomposition enthalpy and entropy are 320.606 K, 41.364 kJ mol⁻¹ and 129.018 J K⁻¹ mol⁻¹, respectively. The polynomial equations of heat capacity of this compound in different temperature ranges have been fitted. The standard enthalpy of formation was determined to be −8023.002 kJ mol⁻¹ with isoperibol reaction calorimeter at 298.15 K.     

Thermodynamic properties of hydrated sodium l-threonate Na(C4H7O5)·H2O(s)

Low-temperature heat capacities of the compound Na(C₄H₇O₅)·H₂O(s) have been measured with an automated adiabatic calorimeter. A solid-solid phase transition and dehydration occur at 290-318 K and 367-373 K, respectively. The enthalpy and entropy of the solid-solid transition are Δ_transH_m = (5.75 ± 0.01) kJ mol⁻¹ and Δ_transS_m = (18.47 ± 0.02) J K⁻¹ mol⁻¹. The enthalpy and entropy of the dehydration are Δ_dH_m = (15.35 ± 0.03) kJ mol⁻¹ and Δ_dS_m = (41.35 ± 0.08) J K⁻¹ mol⁻¹. Experimental values of heat capacities for the solids (I and II) and the solid-liquid mixture (III) have been fitted to polynomial equations.     

Synthesis, heat capacity and enthalpy of formation of [Ho2(l-Glu)2(H2O)8](ClO4)4·H2O

A complex of holmium perchlorate coordinated with l-glutamic acid, [Ho₂(l-Glu)₂(H₂O)₈](ClO₄)₄·H₂O, was prepared with a purity of 98.96%. The compound was characterized by chemical, elemental and thermal analysis. Heat capacities of the compound were determined by automated adiabatic calorimetry from 78 to 370 K. The dehydration temperature is 350 K. The dehydration enthalpy and entropy are 16.34 kJ mol⁻¹ and 16.67 J K⁻¹ mol⁻¹, respectively. The standard enthalpy of formation is −6474.6 kJ mol⁻¹ from reaction calorimetry at 298.15 K.     

Low-temperature Heat Capacities and Thermodynamic Properties of Hydrated Sodium Cupric Arsenate [NaCuAsO4·1.5H2O（s）]

Low-temperature heat capacities of the solid compound NaCuAsO4·1.5H2O(s)were measured using a precision automated adiabatic calorimeter over a temperature range of T=78 K to T=390 K.A dehydration process occurred in the temperature range of T=368-374 K.The peak temperature of the dehydration was observed to be TD=(371.828±0.146)K by means of the heat-capacity measurement.The molar enthalpy and entropy of the dehydration were ΔDHm=(18.571±0.142)kJ/mol and ΔDSm=(49.946±0.415)J/(K·mol),respectively.The experimental values of heat capacities for the solid(Ⅰ)and the solid-liquid mixture(Ⅱ)were respectively fitted to two polynomial equations by the least square method.The smoothed values of the molar heat capacities and the fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were tabulated at an interval of 5 K.     

H2O + Fe(NO3)3 + Ni(NO3)2 ternary system isotherms at 0 °C and 30 °C

H₂O + Ni(NO₃)₂ binary system were investigated in the temperature range from −25 °C to 55 °C. The solid-liquid equilibria of the ternary system H₂O + Fe(NO₃)₃ + Ni(NO₃)₂ were studied using a synthetic method based on conductivity measurements. Tow isotherms were established at 0 °C and 30 °C, and the appearing stable solid phases are iron nitrate nonahydrate (Fe(NO₃)₃·9H₂O), iron nitrate hexahydrate (Fe(NO₃)₃·6H₂O), nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O) and nickel nitrate tetrahydrate (Ni(NO₃)₂·4H₂O).     

Low-temperature heat capacities and standard molar enthalpy of formation of the solid-state coordination compound trans-Cu(Ala)2(s) (Ala = l-α-alanine)

Low-temperature heat capacities of the solid coordination compound trans-Cu(Ala)₂(s) have been measured by a precision automated adiabatic calorimeter over the temperature range from T = 78 K to 390 K. The experimental values of the molar heat capacities in the temperature region were fitted to a polynomial equation of heat capacities (C_p,m) with the reduced temperatures (X), [X = f (T)], by a least square method. The smoothed molar heat capacities and thermodynamic functions of the complex trans-Cu(Ala)₂(s) were calculated based on the fitted polynomial. The smoothed values of the molar heat capacities and fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were tabulated with an interval of 5 K. Enthalpies of dissolution of {Cu(Ac)₂·H₂O(s) + 2Ala (s)} and 2:1 HAc (aq) in 100 ml of 2 mol dm⁻³ HCl, respectively, and trans-Cu(Ala)₂(s) in the solvent [2:1 HAc (aq) + 2 mol dm⁻³ HCl] at T = 298.15 K were determined to be , , and by means of an isoperibol solution-reaction calorimeter. The standard molar enthalpy of formation of the compound was determined as from the enthalpies of dissolution and other auxiliary thermodynamic data using a Hess thermochemical cycle.