Isotope tracer study of hydrogen spillover on carbon-based adsorbents for hydrogen storage

A composite material comprising platinum nanoparticles supported on molecular sieve templated carbon was synthesized and found to adsorb 1.35 wt % hydrogen at 298 K and 100 atm. The isosteric heat of adsorption for the material at low coverage was approximately 14 kJ/mol, and it approached a value of 10.6 kJ/mol as coverage increased for pressures at and above 1 atm. The increase in capacity is attributed to spillover, which is observed with the use of isotopic tracer TPD. IRMOF-8 bridged to Pt/C, a material known to exhibit hydrogen spillover at room temperature, was also studied with the hydrogen-deuterium scrambling reaction for comparison. The isotherms were reversible. For desorption, sequential doses of H2 and D2 at room temperature and subsequent TPD yield product distributions that are strong indicators of the surface diffusion controlled reverse spillover process.     

Hydrogen spillover in Pt-single-walled carbon nanotube composites: formation of stable C-H bonds

Using in situ electrical conductivity and ex situ X-ray photoelectron spectroscopy (XPS) measurements, we have examined how the hydrogen uptake of single-walled carbon nanotubes (SWNTs) is influenced by the addition of Pt nanoparticles. The conductivity of platinum-sputtered single-walled carbon nanotubes (Pt-SWNTs) during molecular hydrogen exposure decreased more rapidly than that of the corresponding pure SWNTs, which supports a hydrogenation mechanism facilitated by "spillover" of dissociated hydrogen from the Pt nanoparticles. C 1s XPS spectra indicate that the Pt-SWNTs store hydrogen by means of chemisorption, that is, covalent C-H bond formation: molecular hydrogen charging at elevated pressure (8.27 bar) and room temperature yielded Pt-SWNTs with up to 16 ± 1.5 at. % sp(3)-hybridized carbon atoms, which corresponds to a hydrogen-storage capacity of 1.2 wt % (excluding the weight of Pt nanoparticles). Pt-SWNTs prepared by the Langmuir-Blodgett (LB) technique exhibited the highest Pt/SWNT ratio and also the best hydrogen uptake.     

Effect of nitrogen doping on hydrogen storage capacity of palladium decorated graphene

A high hydrogen storage capacity for palladium decorated nitrogen-doped hydrogen exfoliated graphene nanocomposite is demonstrated under moderate temperature and pressure conditions. The nitrogen doping of hydrogen exfoliated graphene is done by nitrogen plasma treatment, and palladium nanoparticles are decorated over nitrogen-doped graphene by a modified polyol reduction technique. An increase of 66% is achieved by nitrogen doping in the hydrogen uptake capacity of hydrogen exfoliated graphene at room temperature and 2 MPa pressure. A further enhancement by 124% is attained in the hydrogen uptake capacity by palladium nanoparticle (Pd NP) decoration over nitrogen-doped graphene. The high dispersion of Pd NP over nitrogen-doped graphene sheets and strengthened interaction between the nitrogen-doped graphene sheets and Pd NP catalyze the dissociation of hydrogen molecules and subsequent migration of hydrogen atoms on the doped graphene sheets. The results of a systematic study on graphene, nitrogen-doped graphene, and palladium decorated nitrogen-doped graphene nanocomposites are discussed. A nexus between the catalyst support and catalyst particles is believed to yield the high hydrogen uptake capacities obtained.     

Hydrogen storage in low silica type X zeolites

Low silica type X zeolites (LSX, Si/Al = 1) fully exchanged by alkali-metal cations (Li(+), Na(+), and K(+)) were studied for their hydrogen storage capacities. Hydrogen adsorption isotherms were measured separately at 77 K and <1 atm, and at 298 K and <10 MPa. It was found that the hydrogen adsorption capacity of LSX zeolite depended strongly on the cationic radius and the density of the cations that are located on the exposed sites. The interaction energies between H(2) and the cations follow the order Li(+) > Na(+) > K(+), as predicted based on the ionic radii. Oxygen anions on zeolite framework were minor adsorption sites. Li-LSX had an H(2) capacity of 1.5 wt % at 77 K and 1 atm, and a capacity of 0.6 wt % at 298 K and 10 MPa, among the highest of known sorbents. The hydrogen capacity in LSX zeolite by bridged hydrogen spillover was also investigated. A simple and effective technique was employed to build carbon bridges between the H(2) dissociation catalyst and the zeolite to facilitate spillover of hydrogen atoms. Thus, the hydrogen storage capacity of Li-LSX zeolite was enhanced to 1.6 wt % (by a factor of 2.6) at 298 K and 10 MPa. This is by far the highest hydrogen storage capacity obtained on a zeolite material at room temperature. Furthermore, the adsorption rates were fast, and the storages were shown to be fully reversible and rechargeable. Further optimization of the bridge building technique would lead to an additional enhancement of hydrogen storage.     

Hydrogenation of aryl ketones using palladium nanoparticles on single-walled carbon nanotubes in an ionic liquid

Single-walled carbon nanotubes (SWNTs) are used as supporting materials for palladium (Pd) nanoparticles generated in situ in ionic liquid (IL); Pd nanocatalysts on SWNTs exhibit superior reactivity for hydrogenation of aryl ketones in IL under mild conditions (1 atm of H₂ (g) and room temperature) and can be reused above 10 times without any loss of catalytic activity.     

Hydrogen storage in nanostructured carbons by spillover: bridge-building enhancement

The hydrogen storage capacity in nanostructured carbon materials can be increased by atomic hydrogen spillover from a supported catalyst. A simple and effective technique was developed to build carbon bridges that serve to improve contact between a spillover source and a secondary receptor. In this work, a supported catalyst (Pd-C) served as the source of hydrogen atoms via dissociation and primary spillover and AX-21 or single-walled carbon nanotubes (SWNTs) were secondary spillover receptors. By carbonizing a bridge-forming precursor in the presence of the components, the hydrogen adsorption amount was increased by a factor of 2.9 for the AX-21 receptor and 1.6 for the SWNT receptor at 298 K and 100 kPa. Similar results were obtained at 10 MPa, indicating that the enhancement factor is a weak function of pressure. The AX-21 receptor with carbon bridges had the highest absolute capacity of 1.8 wt % at 298 K and 10 MPa. Reversibility was demonstrated through desorption and readsorption at 298 K. The bridge-building process appears to be receptor specific, and optimization may yield even greater enhancement. Using this technique, enhancements in storage of up to 17-fold on other carbon-based materials have been observed and will be reported elsewhere shortly.     

Hydrogen storage capacity characterization of carbon nanotubes by a microgravimetrical approach

An accurate gravimetric apparatus based on a contactless magnetic suspension microbalance was developed. This unit was used to measure the hydrogen storage capacity for a variety of carbon nanotubes (CNTs) at room temperature and hydrogen pressures up to 11.5 MPa. The results show that regardless of their synthesis methods, purities, and nanostructures all investigated CNT products possess relatively low hydrogen storage capacities (<0.2 wt %). For comparison, the adsorption characteristics of theses samples were also measured at a pressure of 0.1 MPa and liquid nitrogen temperature (approximately 77 K) by a conventional volumetric approach. The methodological aspects related to the accuracy of the hydrogen uptake measurements are also discussed.     

Metal@COFs: Covalent Organic Frameworks as Templates for Pd Nanoparticles and Hydrogen Storage Properties of Pd@COF-102 Hybrid Material

Three-dimensional covalent organic frameworks (COFs) have been demonstrated as a new class of templates for nanoparticles. Photodecomposition of the [Pd(η(3) -C(3) H(5) )(η(5) -C(5) H(5) )]@COF-102 inclusion compound (synthesized by a gas-phase infiltration method) led to the formation of the Pd@COF-102 hybrid material. Advanced electron microscopy techniques (including high-angle annular dark-field scanning transmission electron microscopy and electron tomography) along with other conventional characterization techniques unambiguously showed that highly monodisperse Pd nanoparticles ((2.4±0.5)?nm) were evenly distributed inside the COF-102 framework. The Pd@COF-102 hybrid material is a rare example of a metal-nanoparticle-loaded porous crystalline material with a very narrow size distribution without any larger agglomerates even at high loadings (30?wt?%). Two samples with moderate Pd content (3.5 and 9.5?wt?%) were used to study the hydrogen storage properties of the metal-decorated COF surface. The uptakes at room temperature from these samples were higher than those of similar systems such as Pd@metal-organic frameworks (MOFs). The studies show that the H(2) capacities were enhanced by a factor of 2-3 through Pd impregnation on COF-102 at room temperature and 20?bar. This remarkable enhancement is not just due to Pd hydride formation and can be mainly ascribed to hydrogenation of residual organic compounds, such as bicyclopentadiene. The significantly higher reversible hydrogen storage capacity that comes from decomposed products of the employed organometallic Pd precursor suggests that this discovery may be relevant to the discussion of the spillover phenomenon in metal/MOFs and related systems.     

Hydrogen adsorption measurements and modeling on metal-organic frameworks and single-walled carbon nanotubes

Hydrogen adsorption measurements on Al-, Cr-, and Zn-based metal-organic frameworks (MOFs) and single-walled carbon nanotubes (SWNTs) are presented. The measurements were performed at temperatures ranging from 77 to 300 K and pressures up to 50 atm using a volumetric approach. The maximum excess adsorption at 77 K ranges from 2.3 to 3.9 wt % for the MOFs and from 1.5 to 2.5 wt % for the SWNTs. These values are reached at pressures below 40 atm. At room temperature and 40 atm, modest amounts of hydrogen are adsorbed (<0.4 wt %). A Dubinin-Astakhov (DA) approach is used to investigate the measured adsorption isotherms and to retrieve energetic and structural parameters. The adsorption enthalpy averaged over filling is about 2.9 kJ/mol for the MOF-5 and about 3.6-4.2 kJ/mol for SWNTs.     

Palladium supported on structured and nonstructured carbon: a consideration of Pd particle size and the nature of reactive hydrogen

This study sets out a comprehensive characterization of bulk Pd and Pd (ca. 8% w/w) supported on activated carbon (AC), graphite and graphitic nanofibers (GNF). Catalyst activation has been examined by temperature programmed reduction (TPR) analysis and the activated catalysts analyzed in terms of BET area, TEM, H2 chemisorption/TPD, and XRD measurements. While H2 chemisorption and TEM delivered the same sequence of increasing (surface area weighted) average Pd particle sizes, a significant difference (by up to a factor of 3) in the values obtained from both techniques has been recorded and is attributed to an unwarranted (but widely adopted) assumption of an exclusive H2/Pd adsorption stoichiometry=1/2. It is demonstrated that TEM analysis provides a valid mean particle size once it is established that the associated standard deviation is small and insensitive to additional particle counting. XRD line broadening yielded an essentially equivalent Pd size (20-25 nm) for each supported catalyst. The nature of the hydrogen associated with the supported catalysts has been probed and is shown to comprise of chemisorbed (on Pd), spillover (on the carbon support), and hydride (associated with Pd) species. Physical mixtures of bulk Pd + support (AC, graphite, and GNF) were also considered in order to assess hydrogen spillover by H2 TPD analysis. Generation of spillover hydrogen at room temperature is established where temperatures in excess of 740 K are required for effective desorption from the supported Pd catalysts, i.e., 280 K higher than that required for the desorption of chemisorbed hydrogen. Pd hydride formation (at room temperature) is shown to be reversible with decomposition occurring at ca. 380 K. Taking the hydrodechlorination of chlorobenzene as a test reaction, the capability of Pd hydride to promote a hydrogen scission of C-Cl in the absence of an external supply of H2 is demonstrated with a consequent consumption of the hydride. This catalytic response was entirely recoverable once the Pd hydride was replenished during a subsequent reactivation step.     

Hydrogen storage in metal-organic frameworks by bridged hydrogen spillover

The possible utilization of hydrogen as the energy source for fuel-cell vehicles is limited by the lack of a viable hydrogen storage system. Metal-organic frameworks (MOFs) belong to a new class of microporous materials that have recently been shown to be potential candidates for hydrogen storage; however, no significant hydrogen storage capacity has been achieved in MOFs at ambient temperature. Here we report substantially increased hydrogen storage capacities of modified MOFs by using a simple technique that causes and facilitates hydrogen spillover. Thus, the storage of 4 wt % is achieved at room temperature and 100 atm for the modified IRMOF-8. The adsorption is reversible, and the rates are fast. That has made MOFs truly promising for hydrogen storage application.     

钾掺杂多壁纳米碳管储氢性能研究

使用自制的钴催化裂解碳氢气法制备多壁纳米碳管,并对其进行退火、掺杂等一系列预处理,然后使用高压高纯氢源,在中压(12 MPa)和室温条件下,进行钾掺杂多壁纳米碳管的储氢性能实验.结果表明:预处理对纳米碳管的储氢性能有很大影响.实验条件下,经过氮气退火,并在1.0 mol/L硝酸钾溶液中掺杂的多壁纳米碳管吸氢量最大(H/C质量分数为3.2%).上述样品在室温下的放氢量一般不超过其吸氢量的50.8%.     

Effects of SWNT and metallic catalyst on hydrogen absorption/desorption performance of MgH2

The microstructure and absorption/desorption characteristics of composite MgH2 and 5 wt % as-prepared single-walled carbon nanotubes (MgH2-5ap) obtained by the mechanical grinding method were investigated. Experimental results show that the MgH2-5ap sample exhibits faster absorption kinetics and relatively lower desorption temperature than pure MgH2 or MgH2-purified single-walled carbon nanotube composite. Storage capacities of 6.0 and 4.2 wt % hydrogen for the MgH2-5ap composite were achieved in 60 min at 423 and 373 K, respectively. Furthermore, its desorption temperature was reduced by 70 K due to the introduction of as-prepared single-walled carbon nanotubes (SWNTs). In addition, the different effects of SWNTs and metallic catalysts contained in the as-prepared SWNTs were also investigated and a hydrogenation mechanism was proposed. It is suggested that metallic particles may be mainly responsible for the improvement of the hydrogen absorption kinetics, and SWNTs for the enhancement of hydrogen absorption capacity of MgH2.     

Properties of Pd–Ag/C catalysts in the reaction of selective hydrogenation of acetylene

Samples of Pd/C and Pd–Ag/C, where C represents carbon nanofibers (CNFs), are synthesized by methane decomposition on a Ni–Cu–Fe/Al₂O₃ catalyst. The properties of Pd/CNF are studied in the reaction of selective hydrogenation of acetylene into ethylene. It is found that the activity of the catalyst in hydrogenation reaction increases, while selectivity decreases considerably when the palladium content rises. The obtained dependences are caused by the features of palladium’s interaction with the carbon support. At a low Pd content (up to 0.04 wt %) in the catalyst, the metal is inserted into the interlayer space of graphite and the catalytic activity is zero. It is established by EXAFS that the main share of palladium in catalysts of 0.05–0.1 wt % Pd/CNF constitutes the metal in the atomically dispersed state. The coordination environment of palladium atoms consists of carbon atoms. An increase in the palladium content in a Pd/CNF catalyst up to 0.3 wt % leads to the formation of highly dispersed (0.8–1 nm) Pd particles. The Pd/CNF samples where palladium is mainly in the atomically dispersed state exhibit the highest selectivity in the acetylene hydrogenation reaction. The addition of silver to a 0.1 wt % Pd/CNF catalyst initially probably leads to the formation of Pd–Ag clusters and then to alloyed Pd–Ag particles. An increase in the silver content in the catalyst above 0.3% causes the enlargement of the alloyed particles and the palladium atoms are blocked by a silver layer, which considerably decreases the catalytic activity in the selective hydrogenation of acetylene.     

Hydrogen storage properties of isocyanide-stabilized palladium nanoparticles

Monodispersed palladium nanoparticles protected with n-octyl isocyanide were prepared, and their hydrogen absorption behavior was evaluated. The formation of the nanoparticles has been confirmed by means of 1H NMR and elemental analysis. Fourier transform infrared (FT-IR) showed that three distinct bands (2156, 1964, and 1611 cm(-1)) assigned to mono-, double-, and triple-bridged isocyanide ligands on the palladium surface. The average diameter of the particles was estimated to be 2.1 +/- 0.7 nm from observation by transmission electron microscopy (TEM). X-ray photoelectron spectroscopy (XPS) analysis revealed that the particles contained Pd(0) with little amounts of Pd(II) or Pd(IV), in sharp contrast to the thiol- or phosphine-stabilized palladium nanoparticles. The absorption and desorption of hydrogen were reversible, and the reactions were much faster for the nanoparticles than for the bulk palladium metal, whereas the storage capacity was almost the same, 0.6 wt %.     

Metal@COFs: Covalent Organic Frameworks as Templates for Pd Nanoparticles and Hydrogen Storage Properties of Pd@COF‐102 Hybrid Material

Three‐dimensional covalent organic frameworks (COFs) have been demonstrated as a new class of templates for nanoparticles. Photodecomposition of the [Pd(η³‐C₃H₅)(η⁵‐C₅H₅)]@COF‐102 inclusion compound (synthesized by a gas‐phase infiltration method) led to the formation of the Pd@COF‐102 hybrid material. Advanced electron microscopy techniques (including high‐angle annular dark‐field scanning transmission electron microscopy and electron tomography) along with other conventional characterization techniques unambiguously showed that highly monodisperse Pd nanoparticles ((2.4±0.5) nm) were evenly distributed inside the COF‐102 framework. The Pd@COF‐102 hybrid material is a rare example of a metal‐nanoparticle‐loaded porous crystalline material with a very narrow size distribution without any larger agglomerates even at high loadings (30 wt %). Two samples with moderate Pd content (3.5 and 9.5 wt %) were used to study the hydrogen storage properties of the metal‐decorated COF surface. The uptakes at room temperature from these samples were higher than those of similar systems such as Pd@metal–organic frameworks (MOFs). The studies show that the H₂ capacities were enhanced by a factor of 2–3 through Pd impregnation on COF‐102 at room temperature and 20 bar. This remarkable enhancement is not just due to Pd hydride formation and can be mainly ascribed to hydrogenation of residual organic compounds, such as bicyclopentadiene. The significantly higher reversible hydrogen storage capacity that comes from decomposed products of the employed organometallic Pd precursor suggests that this discovery may be relevant to the discussion of the spillover phenomenon in metal/MOFs and related systems.     

Hydrogen sorption on palladium-doped sepiolite-derived carbon nanofibers

The hydrogen sorption behavior of novel Pd-doped sepiolite-derived carbon nanofibers (SDCNs) was investigated. Two chemical doping methods of ethanol/toluene reduction and a polyol process were applied to control Pd(0) formation in the SDCNs at different Pd doping levels. Hydrogen storage capacity was observed to vary depending on the Pd particle size and doping amount as the Pd particle surface area and the carbon Brunauer-Emmett-Teller (BET) surface area change with them, suggesting the existence of an optimum Pd doping level at each doping method for the best hydrogen storage capacity. Among the samples prepared using the polyol method at different Pd amounts, the maximum hydrogen uptake of about 0.41 wt % was obtained at 298 K and 90 bar for the 5 wt % Pd-doped SDCN that has a relatively high Pd particle surface area and carbon BET surface area. Samples prepared using the ethanol/toluene reduction method exhibited a higher hydrogen uptake of about 0.59 wt % at lower Pd doping levels (3 wt % Pd) due to a smaller Pd particle size and relatively high carbon BET surface area. The hydrogen desorption behavior investigated by differential scanning calorimeter exhibited that a higher amount of hydrogen desorbed at around 860 K from the Pd-doped SDCNs compared to that from the undoped SDCN. Fourier transform infrared (FTIR) spectroscopic analysis suggested that some of the weak chemisorbed hydrogen changes to a normal covalent bond during the heating and effuses at around 860 K.     

Pd在p型单晶硅(100)表面自催化化学沉积

研究了Pd在氢终止的p型单晶硅(100)表面的自催化化学沉积(AED). 在室温下将刻蚀过的硅片浸入常规的HF-PdCl2-HCl溶液制备了Pd膜. 将沉积了Pd的基底作为工作电极, 用循环伏安法(CV)、原子力显微镜(AFM)和X射线光电子能谱(XPS)研究了Pd膜的阳极溶出行为和形貌. 结果表明, Pd的生长遵循Volmer-Weber (VW)生长模式, Pd膜给出了很好的支持.     

Gas adsorption and storage in metal-organic framework MOF-177

Gas adsorption experiments have been carried out on a zinc benzenetribenzoate metal-organic framework material, MOF-177. Hydrogen adsorption on MOF-177 at 298 K and 10 MPa gives an adsorption capacity of approximately 0.62 wt %, which is among the highest hydrogen storage capacities reported in porous materials at ambient temperatures. The heats of adsorption for H2 on MOF-177 were -11.3 to -5.8 kJ/mol. By adding a H2 dissociating catalyst and using our bridge building technique to build carbon bridges for hydrogen spillover, the hydrogen adsorption capacity in MOF-177 was enhanced by a factor of approximately 2.5, to 1.5 wt % at 298 K and 10 MPa, and the adsorption was reversible. N2 and O2 adsorption measurements showed that O2 was adsorbed more favorably than N2 on MOF-177 with a selectivity of approximately 1.8 at 1 atm and 298 K, which makes MOF-177 a promising candidate for air separation. The isotherm was linear for O2 while being concave for N2. Water vapor adsorption studies indicated that MOF-177 adsorbed up to approximately 10 wt % H2O at 298 K. The framework structure of MOF-177 was not stable upon H2O adsorption, which decomposed after exposure to ambient air in 3 days. All the results suggested that MOF-177 could be a potentially promising material for gas separation and storage applications at ambient temperature (under dry conditions or with predrying).     

Identification of surface states on finely divided supported palladium catalysts by means of inelastic incoherent neutron scattering

The purpose of the present investigation was to utilize the inelastic incoherent neutron scattering (INS) technique to reveal changes at the surface of technical catalysts under the influence of hydrogen in gas/solid interactions and during chemical reactions in a liquid-phase process. The formation and the properties of supported palladium hydride and changes of the hydrogen-related surface chemistry of the corresponding activated carbon supports in 20% Pd/C catalysts after short-term and long-term hydrogen cycling at different hydrogen pressures and temperatures were studied. The spectra indicate that hydrogenation of the activated carbon support by hydrogen spillover occurs to, partly, give a material that strongly resembles a-C:H (amorphous hydrogenated carbon). Indications for different relaxation phenomena and long-range phase coherence inside of supported particles of palladium hydride compared to hydrogenated palladium black were obtained. A 5% Pd/C catalyst after use in C-C coupling reactions, the Heck reaction of bromobenzene and styrene to stilbenes, was also studied after subsequent solvent extraction. Evidence for a preferential adsorption and accumulation of cis-stilbene at the catalyst surface was obtained. INS allows identification of a certain isomer from a complex reaction mixture preferentially adsorbed at the surface of a finely divided industrial heterogeneous catalyst.