光源编码的白光散斑剪切干涉计量术

本文提出了一种用非相干光源照明进行剪切干涉计量的方法—光源编码的白光散斑剪切干涉计量术.它采用光栅对光源进行编码以提高空间相干性,使物体的两个剪切像的波面部分相干叠加,以实现剪切干涉.     

剪切散斑干涉术的统计分析

本文用统计光学方法分析了剪切散斑图的成象过程;散斑图的频谱分布以及全场滤波干涉条纹的形成.发现剪切散斑干涉条纹不仅与三维位移微分有关,而且与面内位移量有关.在此基础上又讨论了影响干涉条纹质量的有关因素,并作了实验验证.     

大剪切电子散斑干涉的载频调制与位移场测量

将电子散斑干涉场的载波调制引入到大剪切电子散斑干涉中,通过对参考物的微小偏转引入载波条纹;利用傅里叶变换法,解调出了变形场的相位,从而实现了物体变形场的精确测量。讨论了大剪切载频的调制机理,理论分析表明,调制条纹的空间频率与参考面偏转的角度成正比;因此,控制参考面的偏转角度可实现不同位移量系统的调制。利用中心加载周边固定圆盘进行了典型实验,实验结果证明在大剪切电子散斑干涉技术中可以通过参考面的旋转高质量地实现电子散斑干涉条纹的调制,求解位移场。该系统具有系统简单,不需要专门引入参考光,条纹质量好等优点。该技术可扩展电子散斑干涉的应用范围,有一定的实际应用价值。     

相位调制数字散斑干涉术

提出一种可绕Ｚ轴转动的粗糙平板（参考物体）实现相位调制，该方法在不改变电子散斑干涉术（ＥＳＰＩ）或数字散干涉术（ＤＳＰＩ）系统装置的情况下，可用于微小离而位移场（例如最大离面位移为λ）的测量，以及复杂形变的离面位移场的自动测量。     

双功能数字散斑干涉位移及空间梯度同时测量

为了满足无损检测中复合材料在复杂载荷下多参数变量评估的需求,提出了一种基于光路复用的双功能数字散斑干涉系统,能够同时实现数字散斑干涉和数字剪切散斑干涉测量功能.通过控制其中一个反射镜-波片组合,当该组合离位时,构成数字散斑干涉测量光路,实现离面位移测量;当该组合在位时,构成数字剪切散斑干涉测量光路,实现离面位移空间梯度的测量.测量过程中只需简单切换该组合的位置就可以实现单次加载下被测物体表面离面位移及其空间梯度的同时测量.该系统光路结构简单、切换效率高,能够同时获得高质量的位移及空间梯度测量结果.实验证明,双功能数字散斑干涉系统既具备高抗干扰能力,又具备高灵敏度测试能力,适合复合材料无损检测现场使用.     

用于多参数同时测量的散斑干涉仪

本文描述了一种新的散斑干涉仪,它可以同时对表面应变物体的面内位移、离面位移、位移梯度和莫尔曲率进行测量;由于利用了取向滤波方法,在滤波系统输出平面同时得到了与这些参数对应的散斑条纹.还利用散斑空间运动规律较好地解释了散斑干涉与散斑剪切干涉之间的关系.     

数字剪切散斑干涉术中的刚体位移补偿的新方法

给出一个数字剪切散斑干涉术中的刚体位移补偿的新方法，当刚体位移大于一个像素时，加载前后的散斑图将会由于位置的变化导致失相关，重新安排每一个像素将会克服此失相关，散斑平均、条纹重构以及迭代方法用来改善条纹质量，消除散斑噪声，最后得到可取结果。     

频闪剪切散斑干涉术的研究

提出了一种用于振动研究的方法——频闪剪切散斑干涉照相法。该方法由于采用了剪切镜,能得到较为精确的散斑剪切图,提高了测量的精度,是一种用于振动研究较为理想的散斑照相的新方法。讨论了频闪剪切散斑干涉术的基本原理,给出了频闪剪切散斑图的全场分析的平均光强分析的解析式,并给出了实验结果。理论和实验都表明频闪剪切散斑干涉照相法要优于时间平均剪切散斑干涉照相法。该方法在全场滤波分析时,能给出任一瞬时物体振动信息,得到清晰的、高衬比的全场干涉条纹图,是一种实用可行的方法。     

旋转剪切散斑干涉法的研究

本文提出一种新的动态散斑照相法——旋转剪切散斑干涉法.文中给出了理论分析和初步的实验结果.该方法不仅能在一张剪切散斑图上记录物体动态变形的全过程,而且在全场滤波分析时能方便地给出任一瞬时物体的变形信息,得到清晰的、高衬比的干涉条纹图.该方法设备简单,用途广泛.     

数值孔径与数字剪切散斑干涉条纹亮度的关系

分析了数字剪切散斑干涉条纹图的形成理论，并获得了条纹亮度与摄象机数值孔径等参数的精确关系式，从理论分析和实验验证均得出在采用小的摄象机数值孔径和３ｍＷ Ｈｅ－Ｎｅ激光器的情况下，仍可获得比较满意的数字剪切散斑干涉条纹图，理论工作及其结论对于进行数字剪切散斑干涉实验的最佳参数选择具有指导作用。     

Transient Waves Due to Mechanical Loads in Elasto-Thermo-Diffusive Solids

This paper deals with the study of transient waves in a homogeneous isotropic, solid half-space with a permeating substance in the context of the theory of generalized elasto-thermodiffusion. The half-space is assumed to be disturbed due to mechanical loads acting on its boundary. The model comprising of basic governing differential equations and boundary conditions has been solved by employing Laplace transform technique. Noting that the second sound effects are short lived, the small time approximations of solution for various physical quantities have been obtained and the results are discussed on the possible wave fronts. In case of continuous and periodic loads acting at the boundary, the displacement is found to be continuous at each wave front while it is discontinuous in case of impulsive load. The temperature and concentration fields are found to be discontinuous at all the wave fronts. The displacement, temperature change and concentration deviation due to impulsive, continuous and periodic mechanical loads have also been evaluated in the physical domain at all times by employing numerical inversion technique of integral transform. The computer simulated numerical results have been presented graphically in respect of displacement, temperature change and concentration deviation for brass. A significant effect of mass diffusion has been observed on the behaviour of mechanical and thermal waves.     

Exact and Asymptotic Solutions for the Field of a Point Source in a Transversely Isotropic Medium

Exact and asymptotic solutions are obtained for the acoustic field generated by an isotropic pulsed point source in an infinite transversely isotropic elastic medium. The exact solution for the displacement field is obtained in the form of a double integral over the horizontal slowness and the frequency by using the method of integral transforms. The calculation of the integral over the horizontal slowness by the method of stationary phase reduces the exact solution to an asymptotic solution that is convenient for numerical calculations. Formulas are given for calculating the spreading factors and the wave fronts of quasi-longitudinal qP-waves and quasi-transverse qSV-waves. With the formulas obtained, the displacement field of a point source is investigated for a particular transversely isotropic medium.     

Generalized Darboux Transformations,Rogue Waves,and Modulation Instability for the Coherently Coupled Nonlinear Schrödinger Equations in Nonlinear Optics

Nonlinear optics plays a central role in the advancement of optical science and laser‐based technologies. The second‐order rogue‐wave solutions and modulation instability for the coherently coupled nonlinear Schrödinger equations with the positive coherent coupling in nonlinear optics are reported in this paper. Generalized Darboux transformations for such coupled equations are derived, with which the second‐order rational solutions for the purpose of modelling the rogue waves are obtained. With respect to the slowly‐varying complex amplitudes of two interacting optical modes, it is observed that 1) number of valleys of the second‐order rogue waves increases and peak value of the second‐order rogue wave decreases first and then increases; 2) single‐hump second‐order rogue wave turns into the double‐hump second‐order rogue wave; 3) single‐hump bright second‐order rogue wave turns into the dark second‐order rogue wave and finally becomes the three‐hump bright second‐order rogue wave. Meanwhile, baseband modulation instability through the linear stability analysis is seen.     

Holographic displacement analysis using wave front modulation techniques

The wave fronts from two holographic displacement patterns are modulated by equal but opposite plate rotations and are superimposed to form a moiré pattern. Displacement information contained in the Fraunhofer diffraction pattern of the two superimposed gratings is analysed, and spatial filtering techniques are used to isolate full-field projections of displacement along and normal to the line of sight. Experimental results taken from a pipe subjected to pure torsion show that the method is not only accurate but that the technique is applicable to curved surfaces.     

Acoustical wave propagator for time-domain dynamic stress concentration in a plate with a sharp change of section

The acoustical wave propagator technique is applied to study the time-domain dynamic stress concentration in a two-dimensional flexible plate with a sharp change of section. As a wave packet approaches the plate discontinuity where the sharp change of thickness is introduced, the spatial interference patterns in the displacement of the plate and internal stresses vary with time. The constructive interference of stresses is referred to as time-domain stress concentration. The superposition of wave fronts of incident and reflected wave packets is used to explain the spatial distribution of the interference patterns. The increase of dynamic stress near the vicinity of the discontinuity boundary of the plate is studied as a function of time and the thickness ratio of the plates.     

Effect of hydrogen content in titanium on the structure of the front and the specific features of the combustion of a Ti + 0.5C granular mixture in a cocurrent nitrogen flow

Specific features of the combustion of a titanium–carbon black granular mixture in a quartz tube blown with nitrogen is studied. In contrast to the previous studies, titanium with increased hydrogen content is used. The gas flow (cocurrent filtration) is produced by applying a fixed pressure differential less than 1 atm across the inlet and outlet of the tube. The characteristics of the combustion of a Ti + 0.5C granular mixture in a nitrogen flow are investigated. It is shown that an increased content of hydrogen in titanium leads to the formation of a two-front combustion wave. It is demonstrated that the first and second fronts of the two-front structure arise due to the interaction of the charge with nitrogen. The velocities of propagation of the fronts increase with the nitrogen pressure differential.     

Range resolution and the possible use of spectral information in the echolocating bat, Eptesicus fuscus

Individuals of the echolocating bat Eptesicus fuscus were trained to discriminate simulated two-wave-front targets with internal time delays of 0 to 100 microns between the wave fronts from a one-wave-front target. The ability of bats to discriminate between such targets can be referred to as range resolution. In Eptesicus fuscus, this ability is limited to distinct internal time delays (12, 32-40, and 52-100 microns) between the two wave fronts of a double-wave-front target. Analysis of the simulated two-wave-front echoes reveals periodic frequency minima in the spectrum. Position and separation of these spectral minima depend on the time delay between the two wave fronts. The occurrence of spectral minima within the frequency range of the first harmonic in the echo of the bats' echolocation call correlates to the bats' ability to discriminate a one-wave-front echo from two-wave-front echoes, suggesting that Eptesicus fuscus uses spectral differences within the first harmonic in echoes for range resolution.     

X射线相位衬度成像

文章使用形象、生动、通俗、易懂的语言,介绍X射线相位衬度成像的基本概念,物理思想和方法,其中包括X射线的基本性质、光的波粒二象性、同步辐射X射线光源和常规非相干X射线光源的相位相干性,以及X射线相位衬度成像方法、三维成像的基本原理和相位衬度成像的最新进展,将抽象的相位、相位一阶导数和相位二阶导数概念与形象的光波阵面平移、倾斜和弯曲等形变联系在一起,着重介绍相位衬度成像发展中的创新思想,力图使读者能分享人类文明在这个学科发展中积累的精神财富.     

幂函数型环形聚能器径向振动的等效电路

基于机电类比原理和变厚度薄圆环的平面应力方程,推导了幂函数型环形聚能器径向振动的等效电路、共振频率方程和位移放大系数。讨论了第一、二阶径向共振频率及相应的位移放大系数随圆环半径比的变化关系。结果表明,幂函数型环形聚能器径向振动的等效电路是一种非互易二端口等效网络;一阶和二阶共振频率随圆环内外半径比的增大而增大;一阶径向共振模式下位移放大系数随圆环半径比的增大先降低后升高,二阶径向共振模式下位移放大系数随圆环半径比的增大而降低,但二阶时的位移放大系数整体大于一阶,因此二阶径向共振模式具有更好的径向振动性能。用COMSOL有限元软件对解析理论分析结果进行了验证,仿真模拟结果与解析理论符合良好。根据幂函数型环形聚能器的等效电路模型,进一步设计了一种压电环形换能器,计算了第一、二阶径向共振频率、反共振频率及有效机电耦合系数,通过与COMSOL有限元软件模拟结果对比,符合良好。本文研究结果为幂函数型环形聚能器及压电环形换能器的工程应用提供了简明设计理论,文中研究结论可作为一种径向超声切割刀在超声工程中获得重要应用。