高介电常数石墨烯/聚酰亚胺复合材料的制备与性能

在原位聚合制备氧化石墨烯/聚酰亚胺复合材料的过程中,加入季铵盐表面活性剂,抑制氧化石墨烯在高温亚胺化时的聚集,同时将氧化石墨烯原位还原,获得高介电常数的石墨烯/聚酰亚胺复合材料.结果表明,采用四丁基溴化铵和四丁基碘化铵作为还原剂,利用原位化学还原方法所制备的石墨烯/聚酰亚胺复合材料的介电常数超过聚酰亚胺薄膜40倍以上,复合材料的热稳定性和机械性能也优于聚酰亚胺薄膜.热重分析结果表明,在复合材料高温亚胺化过程中,季铵盐发生热分解,未残留在复合材料中.     

THEORETICAL STUDY OF THE EFFECT OF rGO/GO COMPOSITE COMPOSITION ON THE HYDROGEN FUEL CELL CHARACTERISTICS

Journal of Structural Chemistry - Properties of the hydrogen fuel cell composed only of graphene oxide (GO) and reduced graphene oxide (rGO) are theoretically studied. The optimal parameters of...     

水热法制备Fe3O4/rGO纳米复合物作为锂离子电池阳极材料

以氢氧化铁为四氧化三铁的前驱体,氧化石墨烯（GO）为还原石墨烯（rGO）的前驱体,以水合肼和二水合柠檬酸三钠为混合还原剂,采用水热法制备了还原石墨烯负载四氧化三铁纳米颗粒（Fe₃O₄/rGO）的复合材料。通过透射电子显微镜（TEM）、X-射线衍射（XRD）和热重分析（TGA）对产物的形貌、结构和组成进行了表征。以锂片为对电极进行了扣式电池的组装,通过恒电流充放电和循环伏安法对其电化学性能进行了测试。材料具有均一的形貌,rGO具有较高的还原程度且可以在充放电过程中缓冲Fe₃O₄纳米颗粒的体积变化,使得Fe₃O₄/rGO纳米复合物具有较好的电化学性能。     

氧化石墨烯浓度对还原氧化石墨烯/ZnS电化学性能的影响

以氧化石墨烯(GO)、乙酸锌(Zn(CH₃COO)₂)和硫脲为原料,采用水热法成功制备了还原氧化石墨烯/ZnS(rGO/ZnS)复合材料,并将该材料用作锂离子电池负极。高导电性的 rGO可以为锂离子和电子的传输提供有效的路径,ZnS可以提供较高的理论比容量。rGO/ZnS复合材料在rGO与纳米级高度分散的类球形ZnS颗粒协同作用下展现了较好的嵌锂容量和循环性能。当GO质量浓度为2 mg·mL^-1时制备的rGO/ZnS复合材料的倍率性能最好,循环稳定性最佳。     

Ultrathin Titanate Nanosheets/Graphene Films Derived from Confined Transformation for Excellent Na/K Ion Storage

Confined transformation of assembled two‐dimensional MXene (titanium carbide) and reduced graphene oxide (rGO) nanosheets was employed to prepare the free‐standing films of the integrated ultrathin sodium titanate (NTO)/potassium titanate (KTO) nanosheets sandwiched between graphene layers. The ultrathin Ti‐based nanosheets reduce the diffusion distance while rGO layers enhance conductivity. Incorporation of graphene into the titanate films produced efficient binder‐free anodes for ion storage. The resulting flexible NTO/rGO and KTO/rGO electrodes exhibited excellent rate performances and long cycling stability characterized by reversible capacities of 72 mA h g^?1 at 5 A g^?1 after 10000 cycles and 75 mA h g^?1 after 700 cycles at 2 A g^?1 for sodium and potassium ion batteries, respectively. These results demonstrate the superiority of the unique sandwich‐type electrodes.     

Microstructural Influence on Electrochemical Properties of LiFePO4/C/Reduced Graphene Oxide Composite Cathode

Russian Journal of Electrochemistry - LiFePO4/C/reduced graphene oxide (rGO) composites with different morphologies were synthesized, allowing evaluation of the electrochemical performance as a...     

Unveiling the Anticancer and Antibiofilm Potential of Catechin Overlaid Reduced Graphene Oxide/Zinc Oxide Nanocomposites

Journal of Cluster Science - In the present study, catechin was successfully grafted in reduced graphene oxide Zinc oxide (rGO/ZnO) nanocomposite by solvent free hydrothermal method. Absorption...     

Single and ternary nanocomposite electrodes of Mn3O4/TiO2/rGO for supercapacitors

Journal of Solid State Electrochemistry - Graphene (G) and ternary nanocomposites of Mn3O4, TiO2, and reduced graphene oxide(rGO) electrodes have been prepared for supercapacitor applications. The...     

Study of the interfacial charge transfer in bismuth vanadate/reduce graphene oxide (BiVO4/rGO) composite and evaluation of its photocatalytic activity

Research on Chemical Intermediates - We prepared unique BiVO4/reduce graphene oxide (BiVO4/rGO) nanocomposite with enhanced photocatalytic ability by hydrothermal method applying...     

Ag/Fe_3O_4/rGO纳米复合材料的制备及抗菌性能

以四水合氯化亚铁和硝酸银为原料,硼氢化钠为还原剂,氧化石墨烯(GO)为载体,通过原位还原法制备了具有磁分离功能的银/四氧化三铁/还原氧化石墨烯(Ag/Fe_3O_4/rGO)纳米复合抗菌材料.采用X射线粉末衍射仪(XRD)、X射线光电子能谱仪(XPS)、透射电子显微镜(TEM)等对复合材料进行了表征.结果显示,Fe_3O_4和Ag纳米颗粒均匀分布在rGO片层上.复合材料的饱和磁化率(Ms)为40.5 A·m~2·kg·(-1),表明其具有较强的磁性,将其与菌液混合后,在磁场作用下10 min即可吸附沉降完成磁分离.以大肠杆菌(E.coli)和金黄色葡萄球菌(S.aureus)为实验菌株,通过琼脂扩散法评价了复合材料的抗菌性能.结果表明,该复合材料具有良好的抗菌效果,对E.coli和S.aureus的抑菌圈直径分别为18 mm和13 mm,最低抑菌浓度值(MIC)分别为50 mg/L和80 mg/L,最低杀菌浓度值(MBC)分别为30 mg/L和50 mg/L.     

Oxidizing metal ions with graphene oxide: the in situ formation of magnetic nanoparticles on self-reduced graphene sheets for multifunctional applications

Fe(2+) cations in FeCl(2) or FeSO(4) were oxidized by graphene oxide, leading to an in situ deposition of Fe(3)O(4) nanoparticles onto the self-reduced graphene oxide (rGO) sheets. The resultant Fe(3)O(4)/rGO sheets were demonstrated to possess interesting magnetic and electrochemical properties attractive for a large variety of potential applications.     

Core–Shell LiFePO4/Carbon‐Coated Reduced Graphene Oxide Hybrids for High‐Power Lithium‐Ion Battery Cathodes

Core‐shell carbon‐coated LiFePO₄ nanoparticles were hybridized with reduced graphene (rGO) for high‐power lithium‐ion battery cathodes. Spontaneous aggregation of hydrophobic graphene in aqueous solutions during the formation of composite materials was precluded by employing hydrophilic graphene oxide (GO) as starting templates. The fabrication of true nanoscale carbon‐coated LiFePO₄‐rGO (LFP/C‐rGO) hybrids were ascribed to three factors: 1) In‐situ polymerization of polypyrrole for constrained nanoparticle synthesis of LiFePO₄, 2) enhanced dispersion of conducting 2D networks endowed by colloidal stability of GO, and 3) intimate contact between active materials and rGO. The importance of conducting template dispersion was demonstrated by contrasting LFP/C‐rGO hybrids with LFP/C‐rGO composites in which agglomerated rGO solution was used as the starting templates. The fabricated hybrid cathodes showed superior rate capability and cyclability with rates from 0.1 to 60 C. This study demonstrated the synergistic combination of nanosizing with efficient conducting templates to afford facile Li⁺ ion and electron transport for high power applications.     

The fabrication of flower-like graphene/octadecylamine composites

Three-dimensional flower-like nanomaterials have wide application due to the large specific surface area. In this letter, the morphology of octadecylamine (ODA) from several common solvents is studied and it is found that from the chloroform and acetone solution, ODA assembles into petal-like structure, which further forms the spherical or flower-like architecture. Furthermore, the composite materials incorporated reduced graphene oxide (rGO) and ODA could well keep the flower-shaped structure of ODA. XRD results show that the introduction of graphene has little influence on the structure of ODA and contact angle test indicates good hydrophobic performance of the rGO/ODA material.     

Synthesis of biofuel via levulinic acid esterification over porous solid acid consisting of tungstophosphoric acid and reduced graphene oxide

Research on Chemical Intermediates - Reduced graphene oxide (rGO) was synthesized by chemical reduction of graphene oxide with hydrazine hydrate and used as supports to prepare a series of...     

A facile approach to obtaining PVDF/graphene fibers and the effect of nanoadditive on the structure and properties of nanocomposites

The key factors in the design of nanocomposites include obtaining a good adhesion between components and homogeneous dispersion of the nanoadditive in the polymer matrix. Direct mixing of graphene with polymers which are then processed by melt compounding method results in strong tendency of nanoadditive to agglomerate. The article presents a new approach to obtaining poly(vinylidene fluoride)/graphene (PVDF/rGO) nanocomposites in the form of fibers. This method is characterized by the use of graphene oxide (GO) dispersed in the plasticizer instead of graphene. The combination of the fibers forming process with simultaneous reduction of GO to rGO allowed the authors to obtain nanocomposites with graphene homogeneously dispersed in the polymer matrix. Moreover, addition of graphene resulted in formation of β-phase in the nanocomposites, which is characteristic for PVDF and responsible for pyroelectric and piezoelectric properties of this polymer.     

In Situ Reduction of Graphene Oxide in Waterborne Polyurethane Matrix and the Healing Behavior of Nanocomposites by Multiple Ways

Smart polymers are advanced materials that continue to attract scientific community. In this work, self‐healing waterborne polyurethane/reduced graphene oxide (SHWPU/rGO) nanocomposites were prepared by in situ chemical reduction of graphene oxide in a waterborne polyurethane matrix. The chemical structure, morphology, thermal stability, mechanical property, and electrical conductivity of the SHWPU/rGO nanocomposites were characterized. The prepared SHWPU/rGO nanocomposites were further treated under heating, microwave radiating, and electrifying conditions to investigate their healing property. The results showed that chemical reduction of graphene oxide was achieved using hydrazine hydrate as a reducing agent and the rGO was well dispersed in the SHWPU matrix. The thermal stability and mechanical properties of SHWPU/rGO nanocomposites were significantly increased. The SHWPU/rGO nanocomposites can be healed via different methods including heating, microwave radiating, and electrifying. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 202–209     

Free‐standing and Flexible MoS2/rGO Paper Electrode for Amperometric Detection of Folic Acid

The development of flexible electrodes is of considerable current interest because of the increasing demand for modern electronics, portable medical products, and compact devices. We report a new type of flexible electrochemical sensor fabricated by integrating graphene and MoS₂ nanosheets. A highly flexible and free‐standing conductive MoS₂ nanosheets/reduced graphene oxide (MoS₂/rGO) paper was prepared by a two‐step process: vacuum filtration and chemical reduction treatment. The MoS₂/graphene oxide (MoS₂/GO) paper obtained by a simple filtration method was transformed into MoS₂/rGO paper after a chemical reduction process. The obtained MoS₂/rGO paper was characterized by scanning electron microscopy, X‐ray diffraction spectroscopy, X‐ray photoelectron spectroscopy, Raman spectroscopy, electrochemical impedance spectroscopy. The electrochemical behavior of folic acid (FA) on MoS₂/rGO paper electrode was investigated by cyclic voltammetry and amperometry. Electrochemical experiments indicated that flexible MoS₂/rGO composite paper electrode exhibited excellent electrocatalytic activity toward the FA, which can be attributed to excellent electrical conductivity and high specific surface area of the MoS₂/rGO paper. The resulting biosensor showed highly sensitive amperometric response to FA with a wide linear range.     

Photocatalytic Reduction Synthesis of Ternary Ag Nanoparticles/Polyoxometalate/Graphene Nanohybrids and Its Activity in the Electrocatalysis of Oxygen Reduction

Ternary Ag nanoparticles (NPs)@polyoxometalate (POM)/reduced graphene oxide (rGO) nanohybrids were prepared by a facile photoreduction method, using POM as the photocatalyst, reducing and bridging molecules. The structure of the nanohybrids was characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, Raman spectroscopy, etc. Most importantly, both the rotating disk electrode and rotating ring-disk electrode tests indicated that the Ag NPs@POM/rGO nanohybrids exhibited excellent electrocatalytic activity towards oxygen reduction reaction via a direct four-electron transfer pathway due to the synergistic effect of Ag NPs and rGO.     

Segregated reduced graphene oxide polymer composite as a high performance electromagnetic interference shield

Herein, we report the synthesis of a graphene/polymer composite via a facile and straightforward approach for electromagnetic interference (EMI) shielding applications. Polystyrene (PS) beads were added in graphene oxide (GO)/water solution followed by the addition of hydroiodic acid (HI) for in situ reduction of GO. The composite solution (rGO/PS) was filtered, hot compressed and tested for EMI shielding and dielectric measurements. A 2-mm thick segregated rGO/PS sample with 10 wt% filler loading delivered a high EMI shielding effectiveness (SE) of 29.7 dB and an AC electrical conductivity of 21.8 S m^?1, which is well above the commercial requirement for EMI shielding applications. For comparison with the segregated rGO/PS composite, a control polymer composite sample utilizing a thermally reduced graphene oxide was synthesized by following a conventional coagulation approach. The as-synthesized conventional rGO/PS yield an EMI SE of 14.2 dB and electrical conductivity of 12.5 S m^?1. The high EMI shielding of segregated rGO/PS is attributed to the better filler-to-filler contact among graphene layers surrounded by PS beads and also to the better reduction and preservation of graphene structure during reduction process that makes the low temperature chemically reduced segregated rGO/PS approach a viable route compared to high temperature thermally reduced conventional rGO/PS approach.     

Highly sensitive electrochemical sensor for the food toxicant Sudan I based on a glassy carbon electrode modified with reduced graphene oxide decorated with Ag-Cu nanoparticles

Microchimica Acta - The authors describe a method for room temperature preparation of reduced graphene oxide (rGO) decorated with Ag-Cu nanoparticles (NPs). The nanocomposite (Ag-CuNP/rGO) was...