基于多层结构设计的高储能密度氧化石墨烯/聚酰亚胺复合材料

采用逐层涂布、 分层控制固化程度的方法, 利用聚酰胺酸(PAA, 聚酰亚胺前体)溶液和含有氧化石墨烯（GO）的PAA溶液制备了一系列由高绝缘性PI层与GO@PI介电层交替组合而成的界面清晰且紧密衔接的多层复合薄膜. 通过调控介电层中GO含量及分层结构, 使多层复合薄膜兼具高介电常数和高击穿强度特征. 结果表明, 三层复合薄膜PI/1.0GO@PI/PI的击穿强度为261.5 kV/mm, 储能密度达到1.27 J/cm³, 与相同介电层厚度的单层薄膜相比, 击穿强度和储能密度分别提高了97%和144%, 同时, 其介电损耗也保持在较低水平(tanδ=0.0079). 绝缘层和高介电常数层的协同作用提升了氧化石墨烯/聚酰亚胺复合薄膜的储能密度. 这种简单的多层结构设计有利于氧化石墨烯/聚合物复合材料在介质储能领域的应用.     

原位合成钴/还原氧化石墨烯纳米粒子催化氨硼烷制氢

采用简单的原位还原合成方法,利用具有温和还原性能的氨硼烷作为还原剂,在室温下一步还原氧化石墨烯和氯化钴混合溶液制备了还原氧化石墨烯负载钴纳米复合材料催化剂. 利用所制备的钴/还原氧化石墨烯催化剂催化氨硼烷水解制氢,发现钴/还原氧化石墨烯具有优异的催化性能. 相对于没有负载的钴纳米粒子以及采用硼氢化钠作为还原剂制备的钴/还原氧化石墨烯催化剂,采用氨硼烷还原制备的钴/还原氧化石墨烯催化剂表现出更加优越的催化性能. 动力学测试表明,钴/还原氧化石墨烯催化氨硼烷水解反应为零级反应,同时钴/还原氧化石墨烯催化剂催化氨硼烷水解反应的活化能为27.10 kJ·mol^-1,低于大部分已报道的其它催化剂,甚至一些贵金属催化剂的活化能. 钴/还原氧化石墨烯催化剂有着稳定的循环使用性,特别是其具有的磁性使得它能够直接从溶液中通过磁力回收,极具应用前景. 这种简单有效的合成方法有望推广到其它的金属-还原氧化石墨烯纳米复合材料体系.     

原位合成钴/还原氧化石墨烯纳米粒子催化氨硼烷制氢（英文）

采用简单的原位还原合成方法,利用具有温和还原性能的氨硼烷作为还原剂,在室温下一步还原氧化石墨烯和氯化钴混合溶液制备了还原氧化石墨烯负载钴纳米复合材料催化剂.利用所制备的钴/还原氧化石墨烯催化剂催化氨硼烷水解制氢,发现钴/还原氧化石墨烯具有优异的催化性能.相对于没有负载的钴纳米粒子以及采用硼氢化钠作为还原剂制备的钴/还原氧化石墨烯催化剂,采用氨硼烷还原制备的钴/还原氧化石墨烯催化剂表现出更加优越的催化性能.动力学测试表明,钴/还原氧化石墨烯催化氨硼烷水解反应为零级反应,同时钴/还原氧化石墨烯催化剂催化氨硼烷水解反应的活化能为27.10 kJ·mol-1,低于大部分已报道的其它催化剂,甚至一些贵金属催化剂的活化能.钴/还原氧化石墨烯催化剂有着稳定的循环使用性,特别是其具有的磁性使得它能够直接从溶液中通过磁力回收,极具应用前景.这种简单有效的合成方法有望推广到其它的金属-还原氧化石墨烯纳米复合材料体系.     

石墨烯-聚酰亚胺复合薄膜的制备及性能表征

首先制备可均匀分散于N,N’-二甲基甲酰胺(DMF)中的氧化石墨烯片(GO),将GO的DMF分散液与聚酰胺酸(PAA)的DMF溶液进行液相共混,然后流延成膜制得GO-PAA复合薄膜,最后将PAA进行热酰亚胺化处理,在此过程中GO被原位还原为石墨烯(GS),从而获得石墨烯-聚酰亚胺(GS-PI)复合薄膜.将具有不同石墨烯含量的复合薄膜样品分别进行热重分析及力学和电学性能测试.结果表明,随着GS含量的增加GS-PI复合薄膜的表面电阻率逐渐降低.使用1.0 wt%的GO制备的GS-PI复合薄膜的表面电阻率降至106Ω,此后趋于稳定.在GO不高于0.6 wt%的用量下制备的复合薄膜的拉伸强度和断裂伸长率可发生同步增加;至GO用量为0.6 wt%二者的增强都达到最高值.此后继续增加GS含量,拉伸模量持续提高,断裂伸长率出现下降.在实验涉及的范围内,复合薄膜保持良好的延展性和热稳定性.     

用于压力传感的还原氧化石墨烯/丝蛋白基多孔复合材料

利用丝蛋白能够在还原氧化石墨烯片层上发生选择性聚集的特性,制备了还原氧化石墨烯片层上富集有丝蛋白微纤且分散性良好的还原氧化石墨烯片和丝蛋白混合溶液,并通过冷冻以及低温乙醇处理的方法得到一系列不同比例的还原氧化石墨烯/丝蛋白基多孔复合材料.随后,采用溶液浸泡的方法在多孔材料表面再次沉积还原氧化石墨烯,以进一步提高还原氧化石墨烯/丝蛋白基多孔复合材料的压敏导电性.系统观察和测试结果表明,还原氧化石墨烯的引入,不仅使得多孔材料内部出现了相应的微纳结构,同时也提高了多孔材料的力学性能.还原氧化石墨烯/丝蛋白基多孔复合材料在完全湿态下兼具较好的强度和弹性,可以在0%~80%的压缩应变之间实现良好的压缩回复效果和压力传感性能.其中,最佳比例下的还原氧化石墨烯/丝蛋白基多孔复合材料在低压力下的灵敏度可达0.15 kPa?1,在0~17.3 kPa范围内能够高效工作并且具有优异的电学稳定性和耐疲劳性.因此,还原氧化石墨烯/丝蛋白基多孔复合材料因其高灵敏度、宽工作范围、结构可调以及可塑性好等诸多优点,有望在柔性压力传感方面获得较好的应用.     

石墨烯薄膜的制备和结构表征

采用氧化还原法制备了石墨烯胶状悬浮液, 通过真空抽滤获得了石墨烯薄膜. 利用X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱、拉曼(Raman)光谱、粒度分析和扫描探针显微镜(SPM)等研究了石墨烯薄膜制备过程中各阶段产物的晶体结构、粒度及分子光谱特征变化. FTIR分析结果表明, 石墨在氧化过程中结构层键合大量含氧官能团, 还原后结构层表面仍残存有部分稳定的含氧官能团. XRD结果表明, 石墨氧化后衍射峰向小角度偏移、宽化, 原有石墨峰消失. 在成膜过程中氧化石墨烯形成凝聚体,而石墨烯形成絮凝体. 粒度分析和SPM测试分析结果表明, 氧化石墨烯在水中粒径分布呈拖尾峰形, 分布范围较宽. 石墨烯在水中的粒径成单峰分布, 分布范围较窄、对称性较好且平均粒径较小. Raman测试结果表明, 石墨在氧化和还原过程中, D、G峰逐渐宽化, I_D/I_G逐渐增强, 样品无序度增加. 在以上分析的基础上对石墨烯制备过程的结构特征进行了归纳总结.     

不同形貌镍纳米粒子-石墨烯复合材料的制备及微波吸收性能

采用原位化学还原方法制备出了两种不同形貌的镍纳米粒子-石墨烯(Ni-GNs)复合材料, 并研究了形貌对复合材料电磁吸收性能的影响. 制备过程中通过改变反应物的加入顺序, 制备出球形和刺球形镍纳米粒子-石墨烯复合材料. 利用X射线衍射(XRD)仪、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和矢量网络分析仪(VNA)对复合材料的形貌、结构和微波吸收性能进行了表征. 结果表明: 刺球形镍纳米粒子-石墨烯复合材料相比于球形镍纳米粒子-石墨烯复合材料具有优异的电磁吸收性能, 其原因是由于复合材料中刺球形镍纳米粒子独特的各向同性天线形貌引起的尖端放电效应. 因此利用简单的原位化学还原制备不同形貌镍纳米粒子-石墨烯复合材料的方法可以作为其他复合材料制备的总体路线.     

还原氧化石墨烯/Au复合微电极阵列的制备及光电特性

利用双光束干涉-无掩模光刻技术制备了周期性氧化石墨烯微结构阵列,利用肼蒸气对氧化石墨烯脱氧还原,然后蒸镀超薄Au薄膜制备了还原氧化石墨烯/Au复合微电极阵列(R-GO/Au).对复合电极在可见光波段的透过率和表面电阻进行了表征,结果表明,R-GO/Au复合微电极阵列具有良好的光电特性.将R-GO/Au复合微电极阵列引入到有机太阳电池中作为半透明阳极,器件的光电转化效率可达3.43%.     

部分还原氧化石墨烯/二氧化钛复合材料的水热合成及其光催化活性

采用水热法以Hummers氧化法制备的氧化石墨和钛酸四丁酯为原料制备了部分还原的氧化石墨烯/二氧化钛(RGO/TiO₂)复合光催化剂, 并研究了该复合材料在可见光以及紫外光下对亚甲基蓝的光催化降解活性.结果表明, 通过改变反应温度和氧化石墨加入量可以调控TiO₂的晶相组成及其在复合材料中的分散性; 在水热反应过程中氧化石墨烯发生了部分还原; 所制备的RGO/TiO₂复合材料的可见光和紫外光催化活性均高于纯TiO₂; 部分还原的氧化石墨烯在复合材料中担当载体和电子受体, 同时可以使TiO₂的初始吸收边向可见光区域红移, 增强了TiO₂在可见光区域的吸收, 能有效提高对目标污染物的吸附性和光催化降解活性.     

氢氧化镍纳米线/三维石墨烯复合材料的制备及其电化学性能

采用水热法制备了氢氧化镍纳米线/三维石墨烯复合材料及作为比较的三维石墨烯、氢氧化镍纳米线、还原氧化石墨烯和氢氧化镍纳米线/还原氧化石墨烯, 通过X射线衍射、扫描电镜、热失重分析和氮气吸脱附表征了材料的形貌、结构和组成, 并采用循环伏安法和恒电流充放电测试了复合材料的电化学性能. 结果表明: 氢氧化镍纳米线/三维石墨烯复合材料中直径为20-30 nm的氢氧化镍纳米线和三维结构的石墨烯紧密结合, 相互交联形成网状结构, 其比表面积达到136 m²·g^-1, 孔径分布20-50 nm, 氢氧化镍纳米线的含量达到88% (w,质量分数). 在6 mol·L^-1的KOH电解液中, 复合材料的比电容在1 A·g^-1电流密度下达到1664 F·g^-1, 在1 A·g^-1电流密度下循环3000 次后的比电容保持率为93%. 将复合材料的比电容和循环性能与氢氧化镍纳米线、氢氧化镍纳米线/还原氧化石墨烯、三维石墨烯和还原氧化石墨烯的性能进行比较, 发现三维石墨烯较还原氧化石墨烯具有更高的比表面积和三维多孔结构, 可以更大地提高活性物质的利用率, 进而提高复合材料的比电容和稳定性.     

Synthesis and characterization of fluorine functionalized graphene oxide dispersed quinoline-based polyimide composites having low-k and UV shielding properties

Polyimide nanocomposites having low-k and UV shielding properties have been developed using fluorine functionalized graphene oxide and bis(quinoline amine) based polyimide. The polyimide was synthesized using bis(quinoline amine) and pyromellitic dianhydride at appropriate experimental conditions, and its molecular structure was confirmed through various spectral analysis such as FTIR and NMR. The polyimide (PI) composites were prepared using bis(quinoline amine), pyromellitic dianhydride, and separately filled with 1, 5, 10 wt% of fluorinated graphene oxide (FGO) through in situ polymerization. The polymer composites were characterized using thermo gravimetric analysis (TGA), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). In addition, the water contact angle, dielectric behavior, and UV–Vis shielding behavior of FGO/PI composites were evaluated. The value of the water contact angle of the polyimide was increased with increment of FGO in the polyimide matrix. The highest water contact angle of polyimide composites observed 108° was obtained for 15 wt% FGO reinforced polyimide composite. The value of the dielectric constant for neat, 1, 5, and 15 wt% FGO reinforced polyimide composites was obtained as 4.5, 3.7, 2.6, and 2.0, respectively. It is also observed from by UV–Vis spectroscopy analysis that the FGO reinforced polyimide composites have good UV shielding behavior.     

二硫化钼量子点/还原氧化石墨烯复合材料的制备及其光催化降解有机染料、四环素和Cr（VI）

以钼酸钠、L-半胱氨酸和氧化石墨烯为原料,采用一锅溶剂热还原法制备了二硫化钼量子点/还原氧化石墨烯（MoS₂ QDs/rGO）复合材料,分别以罗丹明B、亚甲基蓝、四环素和Cr（VI）为目标污染物,研究了复合材料的可见光响应光催化降解性能。结果显示,MoS₂ QDs/rGO对两种染料和Cr（VI）的光催化降解率均可达97%以上,对四环素的光催化降解率为69%;循环使用10次,对目标染料的降解率均保持在90%以上。说明MoS₂ QDs/rGO具有良好的催化活性和稳定性。在降解体系中分别加入异丙醇、对苯醌和乙二胺四乙酸二钠捕获剂,结果显示,超氧自由基（?O₂^-）是MoS₂ QDs/rGO光催化反应的主要活性物种。     

Poly(amidoxime)-reduced graphene oxide composites as adsorbents for the enrichment of uranium from seawater

The development of efficient materials for high extraction of uranium(UO22+) from seawater is critical for nuclear energy. Poly(amidoxime)-reduced graphene oxide(PAO/rGO) composites with excellent adsorption capability for UO22+ were synthesized by in situ polymerization of acrylonitrile monomers on GO surfaces, followed by amidoximation treatment with hydroxylamine. The adsorption capacities of PAO/rGO composites for UO22+ reached as high as 872 mg/g at pH 4.0. The excellent tolerance of these composites for high salinity and their regeneration-reuse properties can be applied in the nuclear-fuel industry by high extraction of trace UO22+ ions from seawater.     

Improved interfacial properties of PI composites through graphene oxide and carbon nanotubes on carbon fiber surface

Carbon nanotubes (CNTs) have been identified as excellent nanoreinforcements for carbon fiber (CF)–reinforced polymers regarding a wide range of engineering applications. The outstanding properties of CNTs, such as their large surface area, high mechanical strength, and low manufacturing cost bring them to be distinguished nanoreinforcements for carbon fiber–reinforced polymers to form multifunctional and multiscale composites. Electrophoretic deposition of graphene oxide for CNTs onto the CF surface was conducted. The presence of graphene oxide–CNTs may effectively increase both the roughness and wettability of the CF surface, resulting in an improvement to the interfacial bonding strength between the CF and the polyimide (PI).     

Synthesis of Silver Nanoparticle‐Graphene Composites for Electroanalysis Applications using Chemical and Electrochemical Methods

An electrochemical device was developed for the simultaneous determination of sulfamethoxazole (SMX) and trimethoprim (TMP) using differential pulse voltammetry and glassy carbon (GC) electrodes modified with reduced graphene oxide (rGO) and silver nanoparticle (AgNP) composites, synthesised using both chemical and electrochemical methods. The morphology and electrochemical behaviour of the GC electrodes modified with the rGO/AgNP (chemical method) and rGO‐AgNP (electrochemical method) composites were characterised by scanning electron microscopy and cyclic voltammetry. These techniques demonstrated that, in both methods, the graphene oxide was modified by the AgNPs, and the composite synthesised by the electrochemical method showed a better dispersion of the nanoparticles, resulting in an increase in the surface area compared to the rGO/AgNP composite. The GC/rGO‐AgNP electrode was evaluated and optimised for the simultaneous determination of SMX and TMP, achieving detection limits of 0.6 μmol L⁻¹ for the SMX and 0.4 μmol L⁻¹ for the TMP. The proposed GC/rGO‐AgNP electrochemical device was successfully applied to the simultaneous determination of SMX and TMP in wastewaters samples.     

Dependence of electromagnetic wave absorption properties on the topography of Ni anchoring on reduced graphene oxide

Specific topographic Ni anchoring on reduced graphene oxide(rGO) composites show an astronomical potential as effective wave absorbers due to the synergistic electromagnetic loss effects.Herein,Ni/rGO composites with different topography were successfully prepared via hydrothermal in-situ reduction method.The structure and morphology characteristics revealed that particle-like,chain-like,coin-like and flower-like Ni were closely anchored onto rGO,respectively.The electromagnetic wave absorption(EMA) performance revealed that chain-like Ni/rGO exhibited the optimal reflection loss of-43.7 dB with a thickness of 1.8 mm as well as the EAB of 6.1 GHz at 2.0 mm among all samples due to the good impedance match and the synergistic dielectric and magnetic losses.Besides,one conclusion can be drawn that excellent magnetic coupling effect and impedance matching were the main reasons for significantly improving the EMA performance.Considering the systematic dependence of morphology on EMA,this work provides a perspective for designing high-performance absorbing materials.     

In Situ Reduction of Graphene Oxide in Waterborne Polyurethane Matrix and the Healing Behavior of Nanocomposites by Multiple Ways

Smart polymers are advanced materials that continue to attract scientific community. In this work, self‐healing waterborne polyurethane/reduced graphene oxide (SHWPU/rGO) nanocomposites were prepared by in situ chemical reduction of graphene oxide in a waterborne polyurethane matrix. The chemical structure, morphology, thermal stability, mechanical property, and electrical conductivity of the SHWPU/rGO nanocomposites were characterized. The prepared SHWPU/rGO nanocomposites were further treated under heating, microwave radiating, and electrifying conditions to investigate their healing property. The results showed that chemical reduction of graphene oxide was achieved using hydrazine hydrate as a reducing agent and the rGO was well dispersed in the SHWPU matrix. The thermal stability and mechanical properties of SHWPU/rGO nanocomposites were significantly increased. The SHWPU/rGO nanocomposites can be healed via different methods including heating, microwave radiating, and electrifying. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 202–209     

Microstructural Influence on Electrochemical Properties of LiFePO4/C/Reduced Graphene Oxide Composite Cathode

Russian Journal of Electrochemistry - LiFePO4/C/reduced graphene oxide (rGO) composites with different morphologies were synthesized, allowing evaluation of the electrochemical performance as a...     

Environmentally friendly, one-pot synthesis of Ag nanoparticle-decorated reduced graphene oxide composites and their application to photocurrent generation

In this paper, we develop an environmentally friendly, one-pot strategy toward rapid preparation of Ag nanoparticle-decorated reducd graphene oxide (AgNPs/rGO) composites by heating the mixture of GO and AgNO(3) aqueous solution in the presence of sodium hydroxide at 80 °C under stirring. The reaction was accomplished within a short period of 10 min without extra reducing agent. As-synthesized AgNPs/rGO composites have been successfully applied in photocurrent generation in the visible spectral region.