HL—1M装置超声分子束流注入过程中的团簇现象

在环流器等离子体中用超声分子束流注入加料,引起密度峰化和约束改善,其主要机制归结为加料粒子的注入深化和密度上升率（注入效率）的提高。本文主要介绍经过改进的超声分子束流注入HL－1M装置等离子体利用边缘Hα线辐射、径向可伸缩的静电探针和顺着束流注入方向的CCD摄像等诊断技术,考察了粒子注入口及注入口附近区域电子温度和密度沿径向分布的变化,研究了分子束粒子注入等离子体的所谓“冷通道模型”及其效应。     

HL-1M装置超声分子束注入等离子体穿透特性的诊断

在HL1M装置超声分子束注入实验中,利用在分子束注入口同一极向截面的上窗口处布局的一个20道PIN探测器阵列所获得的多道Hα辐射信号,并借助于Abel变换算法反演出Hα辐射强度沿大半径方向的分布随时间的演变,对超声分子束在等离子体中的穿透特性和注入速度进行了分析和计算.在气源气压大于1MPa时,观察到超声分子束中性粒子已经进入到等离子体芯部,并获得束注入速度大于1kms的实验结果 关键词： 等离子体 超声分子束 穿透特性 Hα辐射     

中国环流器二号A(HL-2A)超声分子束注入最新结果

HL-2A装置电子回旋共振加热时,氘脉冲超声分子束穿越分界面,等离子体各项重要参数,包括等离子体储能、极向比压、中平面线平均密度、中心密度和温度上升,中子产额急剧增加. 超声分子束注入有可能较常规脉冲送气在台基顶部提供较强的粒子源,被认为是可供ITER替换脉冲送气的加料方法之一. HL-2A装置氢超声分子束注入的平均速度约为1.7km,与溢流(分子流)注入真空的速度测量作了比较. 关键词： 超声分子束注入 托卡马克 飞行时间法 加料     

HL-1M装置高气压超声分子束加料效果

超声分子束注入作为一种新的托卡马克加料方法,已成功地开发和应用于环流器新一号(HL1M)和超导托卡马克HT7.近期开展的高气压超声分子束注入实验,在束流中发现了团簇流,其注入等离子体深度超过17cm.电子密度上升率接近于小型冰弹丸加料.多脉冲超声分子束注入形成电子密度阶梯形上升,类似于多弹丸加料效果,电子温度剖面呈中空分布.描述了在HL1M装置同一次欧姆放电等离子体中超声分子束与冰弹丸加料效果的实验比较. 关键词： 超声分子束 托卡马克 团簇 加料     

HL-2A装置上超声分子束注入触发L-H转换的实验研究

利用具有定向速度的超声分子束注入技术,研究了HL-2A装置在较低加热功率条件下实现L-H转换的等离子体放电特征,从边缘密度分布的差异比较分析了普通送气和超声分子束注入对L-H转换的影响.实验结果表明,HL-2A装置上采用超声分子束注入可直接触发L-H转换,明显降低L-H转换功率.通过对大量实验数据的分析和整理发现,利用超声分子束注入实现L-H转换的最低加热功率,比同等条件下采用普通送气实现L-H转换的最低加热功率减少约10％.     

HL—1M托卡马克脉冲超声分子束注入等离子体及杂质特性研究

文内叙述了在ＨＬ－１Ｍ托卡马克脉冲分子束注入实验中观测到的等离子体和杂质行为。分子束注入减小了杂质辐射,有效地提高了电子密度,改善了等离子体的约束性能。     

HL-2A托卡马克超声分子束注入深度和加料效果研究

超声分子束注入深度与加料效率是分子束加料研究中的基本课题.在近期开展的超声分子束注入实验中，发现分子束注入深度与等离子体电子温度和密度、分子束源的气压和温度有直接关系，获得了分子束注入深度的定标律.在低温气体源(液氮冷却)的分子束注入实验中，发现分子束流中形成了团簇，其注入深度超过30 cm，分析了在低温气源分子束注入实验中的团簇现象. 关键词： 超声分子束注入 注入深度 加料效率 团簇     

HL-2Aװ�ñ�Ե�Ŷ����Թ۲�

用中平面往复快速扫描6探针组观测HL-2A装置边缘等离子体的扰动特性。在一次放电中能测量到边缘等离子体参数的时空分布及其涨落量，雷诺胁强与极向流和带状流的关系，以及静电涨落驱动的粒子通量和热通量的径向变化。在多发弹丸注入(MPI)和多脉冲超声分子束注入(SMBI)条件下，研究了边缘参数的涨落和相关特性。实验结果表明：SMBI和MPI等注入手段改变了边缘的扰动特性；雷诺胁强的径向梯度可以驱动带状流，抑制湍流输运。     

HL-2A装置偏滤器位形超声分子束注入深度观测

用22道Hα辐射测量阵列观测了HL-2A装置偏滤器位形超声分子束的注入过程。观测结果表明：在HL-2A装置偏滤器位形下,当分子束注入气源压强大于1MPa时,Hα辐射沿径向分布存在两个峰值,其第二个Ha辐射峰值位于r/a~0.8附近,表明大部分氢粒子在等离子体边缘(SOL区域)即被离解或电离,但仍有部分氢粒子沉积在分界面内5cm。     

HL—1M多脉冲分子束注入的CCD摄像

HL－1M装置实现了一种新的气体加料改善约束的方法－分子束注入（用多脉冲高速分子束注入加料）。多脉冲分子束注入加料可以控制等离子体密度分布、改善约束性能和提高密度极限。HL－1M托卡马克的多脉冲分子束注入得到了高的加料效率、改进了能量约束并维持了较高的密度峰化截面。分子束加料τE的改善和Qn 值的增加可与HL－１M装置的小弹丸注入和ASDEX的小弹丸注入结果相比拟。脉冲高速分子束是由高压氢分子气体通过拉瓦尔（Laval)喷口形成的。在实验中CCD相机可以用于研究分子束与离子体相互作用的许多复杂物理现象,用它拍摄分子束在等离子体中的辐射云照片是研究分子束辐射过程极其有效的手段。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.