虚物成像适用理论的论证

关于虚物成像问题多有论文发表,但都忽略事先论证虚物是否具有光学成像物的属性,实物成像理论是否适用于虚物.这些文章都是直接把虚物当做实物而运用实物作图成像方法,举例阐明虚物作图成像方法.本文通过物与像之间的共轭关系,虚物成像公式的推导证明:虚物是光学成像之物,具有光学成像物的一切属性.可以应用所有实物成像理论和方法求解虚...     

水中受激拉曼散射的能量增强及受激布里渊散射的光学抑制

为提高液体介质中受激拉曼散射的输出能量,提出了通过温度调控来抑制受激布里渊散射的方法,设计了532 nm多纵模宽带脉冲激光泵浦的受激拉曼散射发生系统,测量了不同温度下水中前向受激拉曼散射及后向受激布里渊散射的输出能量,分析了水温、泵浦激光线宽及热散焦效应对受激拉曼散射输出能量影响的物理机制.实验结果表明:通过降低水温可实现对受激布里渊散射过程的有效抑制,同时减小热散焦效应带来的光束畸变,从而有效提高受激拉曼散射的输出能量.研究结果对液体介质中的受激拉曼散射多波长转换具有重要意义.     

在轨空间目标光学特性宏观表征模型的反演重构

为了在天基远距离条件下反演三轴稳定空间目标表面的光学特性参数,提出了基于可见光时序光度信号分析的光学特性宏观表征模型的反演重构方法.首先,综合考虑空间目标的结构特性、表面材料特性、帆板的对日指向运动特性、光照观测几何以及光学系统特性,完善了面向在轨观测的空间目标可见光时序光度建模方法;其次,将光度模型等效为双面模型,并利用双向反射分布函数(BRDF)的多级融合模型表征复杂材料表面的光学反射特性,将BRDF对应的面积反射率乘积作为待反演参数;最后,以时序光度信号的测量值与模型值之间的差异最小为优化目标,建立线性优化方法,实现模型参数的反演.仿真实验表明,提出的模型在轨重构方法对于近轨观测条件下的本体、帆板信号的重构精度达到97%以上,验证了方法的正确性.     

Implementation of opto-digital stereo object tracking system

In this paper, a new opto-digital stereo object tracking system using the variable window mask and the optical binary phase extraction joint transform correlator (BPEJTC) is proposed. At the first step, with the distance information from the stereo camera to the tracking object easily acquired by the structural elements of a stereo vision system, the area of the tracking object can be digitally extracted by using the variable window mask. And, at the second step, by carrying out the optical BPEJTC between this reference image obtained from the variable window mask and the stereo input image, the coordinates of the tracking object's location can be acquired, and then with these values, the convergence angle and the pan/tilt of the stereo tracking camera can be finally controlled. From some experimental results, the proposed system is found to be able to effectively extract the area of the target object from the input image having the background noises by using the variable window mask. And, with the location values of the tracking object obtained by using the optical BPEJTC, the convergence angle and the pan/tilt of the stereo cameras can be controlled. Finally, a feasibility of real-time implementation of the adaptive stereo object tracking system using the proposed algorithm is also suggested.     

利用染料片吸收控制受激布里渊散射功率限幅波形

理论研究了受激布里渊散射过程中功率限幅响应特性.采用高斯型入射脉冲，数值模拟了抽运参数(抽运峰值功率密度、抽运脉冲宽度)，介质参数(增益系数、声子寿命)和结构参数(聚焦透镜焦距、介质池长)等物理参数影响限幅输出波形中剩余峰的特性规律.对如何控制剩余峰进行了理论分析.研究表明，声子寿命较小、增益系数大的布里渊介质光限幅响应较好，声子寿命较大、增益系数小的布里渊介质光限幅响应较差；无法单纯通过控制布里渊介质参数来完全消除剩余峰.实验上采用染料片吸收剩余峰，获得接近平顶的限幅输出波形.     

SBS相位共轭补偿现象的实验研究与图示化分析

通过实验观察了受激布里渊散射相位共轭波前补偿现象,分析了单横模激光、波前弱畸变及强畸变激光受激布里渊散射现象的差异.由于工作介质中强烈的热畸变所引起的波前破碎效应,高功率固体激光器的输出光束一般都不是理想的高斯型单横模,而是具有弱畸变或强畸变波前结构的光束,其包含多个子光束.只有总能量足够大的激光束被聚焦到布里渊介质中时,其包含的所有子光束才能各自按单横模受激布里渊散射规律产生后向散射光,再合并而实现完全的相位共轭波前反转,否则就只能实现部分相位共轭波前反转,即部分相位共轭补偿.     

Optoacoustic imaging with synthetic aperture focusing and coherence weighting

Optoacoustic imaging takes advantage of high optical contrast and low acoustic scattering and has found several biomedical applications. In the common backward mode a laser beam illuminates the image object, and an acoustic transducer located on the same side as the laser beam detects the optoacoustic signal produced by thermoelastic effects. A cross-sectional image is formed by laterally scanning the laser beam and the transducer. Although the laser beam width is generally narrow to provide good lateral resolution, strong optical scattering in tissue broadens the optical illumination pattern and thus degrades the lateral resolution. To solve this problem, a combination of the synthetic aperture focusing technique with coherence weighting is proposed. This method synthesizes a large aperture by summing properly delayed signals received at different positions. The focusing quality is further improved by using the signal coherence as an image quality index. A phantom comprising hair threads in a 1% milk solution was imaged with an optoacoustic imaging system. The results show that the proposed technique improved lateral resolution by 400-800% and the signal-to-noise ratio by 7-23 dB over conventional techniques.     

光隔离器法抑制Michelson干涉型光纤水听器中的SBS

光纤水听器是利用光的干涉信号进行探测的,但随着入射光功率的增加,易发生受激布里渊散射（stimulated Brillouin scattering,SBS）效应,并因而产生噪声,限制入射光功率的增加,极大地影响探测信号。为了抑制SBS效应,提高光纤水听器性能,以Michelson型光纤水听器为例,从实验和理论上研究了SBS及其阈值特性。根据阈值公式分析了提高阈值的方法,着重讨论了光隔离器法对SBS的抑制。最后利用时域有限差分方法对光纤内的入射光、Stokes光和声波的时空分布进行了分析。只要给出初始条件及光纤参数即可得出光纤内各波的时空分布。通过开展抑制此效应的研究,不仅为可调谐相干光的产生提供一个新途径,而且可作为一种有效手段来研究各种光纤系统中的散射特性。     

基于布里渊载波相移的宽带可调谐二倍频微波信号生成

本文提出并实验验证了一种基于光纤中受激布里渊散射效应的光子二倍频微波信号生成技术.利用布里渊增益谱内的强色散特性,对光强度调制器产生的双边带调制信号的载波进行π/2相移,可实现载波与±1阶边带拍频仅生成二倍频微波信号.由于光纤中受激布里渊散射的窄带特性以及仅对双边带调制信号的载波进行相移,不影响调制信号两个边带的幅值和相位,因而生成的二倍频微波信号可实现宽带调谐,调谐范围仅受其他光器件的工作带宽限制.此外,信号光和产生受激布里渊散射的抽运光均来自同一光源,因而不受波长漂移的影响,系统具良好的稳定性.     

Reconstruction of Optical Energy Deposition for Backward Optoacoustic Imaging

Visualizing optical properties, such as the optical absorption coefficient, helps us to obtain structural information of biological tissues. In this paper, we present an efficient reconstruction algorithm for optical energy deposition in backward optoacoustic imaging. Note that econstruction of optical energy deposition is the first step to imaging the optical absorption coefficient distribution. This algorithm is derived from the optoacoustic wave equations with line focusing, in which the focusing techniques were utilized to reduce the reconstruction problem from three dimensions (3-D) to one dimension (1-D). Simulations and experiments were conducted to verify efficacy of this algorithm. In the simulations, optoacoustic signals were generated based on the solution of the optoacoustic wave equations. In the experiments, a 3-D backward mode optoacoustic imaging system was built. The system consisted of a Nd YAG laser for optical irradiation and an acoustic detection system with a broadband hydrophone. A phantom was used to illustrate validity of the proposed algorithm. The results show that optical energy deposition can be efficiently reconstructed in both simulations and experiments.     

Study on forward stimulated Brillouin scattering in a backward pumped fiber Raman amplifier

Strong multi-order forward stimulated Brillouin scattering (SBS) has been observed in the backward pumped S-band distributed fiber Raman amplifier (FRA) with tunable narrow signal source (less than 100 MHz) when the pump power of FRA reached the SBS threshold. This does not obey the theory that only weak backward SBS lines exist according to the conservation of energy and momentum and the wave vector selected rule. This is because the sound waveguide characteristic weakens the wave vector rule, and the forward transmitted sound waveguide Brillouin scattering lines are generated and amplified in FRA.When the pump power is further increased, 11 orders of SBS lines and comb-like profile are observed. For the excited line, the frequency is 197.2296 THz and the power is 0 dBm. The even order SBS lines are stronger than odd order SBS lines, the power of the 2nd and 4th order SBS lines is 1.75 dBm, which is 16 dB higher than that of the 1st and 3rd order SBS lines. The odd order SBS lines are named BrillouinRayleigh scattering lines.     

光学单池中受激布里渊散射的双光束共轴放大

介绍了一种在单池中实现受激布里渊散射双光束共轴放大的方法,能够在单一光学池中同时实现受激布里渊散射的产生和放大.相比于传统的双池放大技术,这种方法具有结构简单、信号损失小的优点.对于激光雷达等无法采用双池放大的实际应用领域,单池放大技术更是一种必要的方法. 关键词： 受激布里渊散射 放大 光学单池     

双向掺铒光纤放大器的特性分析

讨论了双向掺铒光纤放大器的结构方案,利用考虑放大的自发辐和北员耗影响的双向掺铒光纤放大器稳态放大速率方程模型分析的增益与掺铒光纤长度、输入信号光功率、帛运光功率及抽运方式等参数之间的关系,研究了单向和双向等功率抽运下正反向噪声系数随正反向信号光输入功率的变化行为。     

Resolution improvement for enhancing interference fringes of digital holograms with near infrared illuminance

A new resolution improving method of enhancing the interference stripes, which can achieve better reconstruction of the recorded object of infrared digital holography has been proposed in this paper. The experiment is conducted under near infrared illuminance. We create poor quality holograms with very low-resolution interference stripes and enhance it with our new method. The processed holograms have much higher-resolution interference stripes. This method is based on interpolation theory, and we make it works fast, stable and easy to apply. Both the forward and backward interpolation of the oriental and portrait direction of the source pixels have been calculated, and have been used to realize the final aim of resolution improvement. During the experiment, since the responsivity of the CCD is not satisfied with the illuminance laser, which is by design, we also give specific analysis on the experimental setup of our work to make sure the object information can be fully recorded by the optical setup but cannot be reconstructed because of the low-resolution and unobvious of the interference stripes. After the resolution improvement process of the original hologram, the object information can then be fully reconstructed, which is very clear in the paper. Figures and dataflow give evidence and demonstrate the good performance of our method.     

Stimulated Brillouin scattering generation in ns pulsed double-cladding fiber amplifier

This paper proposes a study both in theory and experiment on the phenomenon of stimulated Brillouin scattering (SBS) in a double-cladding fiber amplifier. The distortion characteristic of the 200-ns is observed through a stationary coupled-wave SBS model including the second-order Stokes wave for double-cladding fiber amplifier. The first-order Stokes wave is amplified during backward propagation to such an intense peak power that it can generate second-order Stokes wave. The stochastic aspect of pulse distortion induced by SBS is also experimentally demonstrated in the single frequency 200 ns pulse amplifier with 12-m Yb³⁺ doped double-cladding fiber. The backward SBS pulse is observed when the pulse peak power is up to 3.3 W, and the pulse width of SBS is narrower than that of the input signal. In the meantime, to overcome the difficulty of the pulse spectrum measurement, a novel method is put forward to measure the SBS frequency shift using the F–P interferometer with free spectral rang of 30 G, showing a good agreement with the theoretical estimation. SBS is the main factor that limits the output pulse peak power in the amplification of the single-frequency pulse.     

基于光流的运动小目标检测算法

运动目标的检测是目标识别与跟踪的关键技术之一。光流技术是一种以物体的运动特征来检测目标的方法,它的提出为运动小目标的检测开辟了新的空间。在一个搜索跟踪系统中使用光流技术检测和跟踪空中小目标,目标大概为5～10个像素,而且背景复杂,相机抖动,普通分割算法无法得到小目标。在目标的运动明显异于背景的情况下,通过利用基于光流的目标检测算法来检测出小目标,同时运用高斯金字塔模型,提高算法的运算速度。试验结果表明提出的基于光流的检测算法在背景运动的红外图像中取得了较好的效果。     

Phase conjugated wavefronts by stimulated brillouin and Raman scattering

Experimental investigations were made of wavefront reproduction (WFR) by backward stimulated Raman scattering (SRS) and backward stimulated Brillouin scattering (SBS) in CS₂ with a linearly polarized ruby pump beam. The experimental studies were carried out as a function of the optical waveguide diameter and photographic records comparing the pump beam with the backscattered SBS and SRS beams are presented. In all of the cases studied there was a high degree of replication between the SBS and pump beams; however, a deterioration in the quality of the replicated SRS beam was observed, and it increased as the cross-sectional area of the waveguide increased.     

Maximum repeaterless transmission of lightwave systems imposed by stimulated Brillouin scattering in fibres

To aid in designing high-speed optical networks, the fundamental limitations of lightwave transmission systems are investigated from the viewpoint of fibre nonlinearities, particularly of stimulated Brillouin scattering (SBS). When SBS occurs, the fibre launch power is usually restricted; thus, SBS is detrimental to lightwave systems. The effects of SBS on signals transmitted in fibres are clarified for several modulation schemes, especially coherent modulation schemes. A generalized model based on the maximum power spectrum density in the signals is proposed to estimate the degree of SBS generation. The maximum repeaterless transmissions for various bit rates, laser diode linewidths, and Brillouin gains of optical fibres are presented. The degradation of transmission due to SBS is clarified experimentally, focusing on the bit error rate, fibre input power, and spectra of signals transmitted in fibres. In addition, various techniques for suppressing the SBS effects are proposed. A repeaterless transmission experiment conducted over 364.3 km using optical booster amplifiers is presented to verify the effectiveness of the SBS suppression technique.     

高精度光学平台调焦控制系统

针对经纬仪、量子通信望远镜等光电跟踪控制系统光学平台调焦的需要,在保证跟踪控制性能和可靠性的基础上,设计了一种低成本、小体积的高精度光学调焦控制系统,以先进精简指令集计算机处理器和现场可编程门阵列为核心组成比例-积分-微分光学控制平台来实现调焦控制。分析如何提升光学平台调焦精度,利用基于缓冲运放进行信号扩展的方法提升光学平台调焦控制反馈偏差信号精度,提出3种反馈信号补偿方法并进行对比和分析,选择等分中值补偿方法对电位器反馈信号进行补偿,在不影响调焦时间的基础上简化了软硬件设计,提升了调焦精度和效率,具有低功耗、实现简单、成本低、体积小等优点。在实验中,对获取的调焦图像采用主观分析和客观评价标准相结合的方法进行调焦效果验证,证明了该设计的优势。该设计已用于某光电跟踪探测项目,在1μm级调焦精度时全程调焦时间约为3s,反应快速,性能稳定可靠。     

Optical limiting effect based on stimulated Brillouin scattering in CCl4

The optical limiting effect based on stimulated Brillouin scattering (SBS) in a nonlinear medium was investigated. We numerically treated the nonlinear propagation process with a theoretical model, which includes the spontaneous nature of the initiation of SBS, and obtained optical limiting effect in the process. Energy limiting, pulse reshaping and stabilization have been demonstrated on SBS mechanism with the nonlinear medium CCl_4. The input optical signals were Nd:YAG nanosecond laser pulses with width varying from 16ns to 7ns then to 2ns, the relationship between the transmitted signal and launched pump signal was shown. In the experimental regime, the most stable pulse and a superior energy stabilization of the transmitted pulse were obtained when the laser pulse-width became as short as 2ns. For the energy variation of laser pulses in a wide range of 14－88mJ, the output energy was limited in a quite narrow range 4.5－5.5mJ.