高残炭硼酚醛树脂的制备

酚醛树脂(PF)因其具有良好的耐热性能和机械性能而被广泛应用。但其耐热性能已经满足不了现代航空航天技术的需求,研究发现,采用硼酸对酚醛树脂进行改性,可以制得具有优良耐高温性能的硼酚醛树脂(BPF)。采用硼酸酯法合成硼酚醛树脂,n(苯酚)∶n(甲醛)=1∶1.5时耐热性最佳。热分析结果表明,合成的BPF在1000℃条件下的残炭率为78%,其耐热性能明显优于传统的酚醛树脂。同时讨论了不同硼酸含量对BPF耐热性能的影响,当n(硼酸)∶n(苯酚)0.33∶1时,残炭率趋于稳定。此外,利用差示扫描量热仪(DSC)方法确定BPF预固化温度为160℃,后固化温度为220℃。     

耐高温耐烧灼热固性硼酚醛树脂的合成

用硼酸改性酚醛树脂得耐高温耐烧灼热固性硼酚醛树脂,其结构经IR,DSC,TGA等表征。反应条件：苯酚500mmol,n(苯酚)：n(甲醛)：n(硼酸)=1：1．5：0．4,氨水(pH=8—9)作催化剂,缩合反应温度60℃-70℃,硼酯化反应温度105℃-120℃,同时在控制反应时间下脱水两次。所得产物在700．8℃下仍有75．3％的固体残余物。     

带环氧基团纳米二氧化硅改性酚醛树脂的合成及热性能

以苯酚、甲醛、带环氧基团纳米二氧化硅(RNS-E)为原料,采用原位聚合法合成了RNS-E改性酚醛树脂.利用红外光谱(FT-IR)对其结构进行了分析,并利用热重分析(TGA)对其热性能进行了研究.结果表明,改性后的酚醛树脂热稳定性得到提高,当RNS-E的加入量为4%时(质量分数),失重10%时的热分解温度(t10%)较酚醛树脂的提高了15℃,1 000℃下残炭率较酚醛树脂提高了7%.     

硼改性酚醛树脂的制备及其耐热性能研究

酚醛树脂因其材料成本低、工艺简单、原料易得等优点，在工业上得到了广泛应用。但由于其耐热性不足以及游离酚含量较高等因素，限制了其应用范围。本文利用硼酸对酚醛树脂进行改性，利用红外和质谱对其结构进行表征，改性后酚醛树脂的耐热性能、游离酚等指标得到明显改善。当失重20%时酚醛树脂改性前后耐热性能提高了56℃,可能是由于硼酚醛树脂中含有硼的三维交联网状结构，提高了树脂的交联密度；游离酚含量从改性前的4.12%降低到了2.21%,说明硼元素的引入改变了苯酚的活性，提高了树脂聚合度。     

晶核原位法合成纳米铜改性酚醛树脂及其性能

利用甲醛与硫酸铜还原反应,通过添加铜晶核,控制反应液的pH、温度等条件,在酚醛树脂合成体系内原位生成了球形、粒度分布30~50nm的纳米铜粒子。采用红外光谱分析、热重分析和冲击试验对纳米铜改性酚醛树脂的结构和性能进行了表征,结果表明,(1)纳米铜与酚醛树脂间存在着化学作用;(2)纳米铜对酚醛树脂的耐热性有显著影响,与纯酚醛树脂的相比,纳米铜改性酚醛树脂的初始分解温度可提高51℃;(3)纳米铜对酚醛树脂的韧性有显著影响,与纯酚醛树脂的相比,纳米铜改性酚醛树脂的冲击强度可提高约52%。     

有机硅改性硼酚醛树脂的研制

通过Williamson醚合成、Claisen重排及硅氢化反应得到邻羟基苯丙基硅油(Si-phenol),将其与苯酚混合,采用硼酸酯法合成有机硅改性硼酚醛树脂(SBPF).利用1H NMR和FTIR技术对其结构进行分析,采用热重分析(TGA)、剪切测试、拉伸测试以及冲击测试等手段对其耐热能和力学性能进行表征.考察了Si-phenol的含量对树脂各项性能的影响,并研究其作用机理.结果表明,合成的有机硅改性硼酚醛树脂具有良好的耐热性,适量硅氧烷链段的引入可以改善树脂的黏接性能,提高其力学强度.     

低聚端羟基聚硅氧烷接枝增韧酚醛树脂的制备及性能

由低聚羟基封端聚硅氧烷（HO-PDM）与甲醛和苯酚的接枝反应制备了增韧改性酚醛树脂,用FT-IR对改性酚醛树脂的结构进行表征,用电子万能试验机测试了改性前后酚醛树脂的力学性能,用热重分析仪测试改性酚醛树脂的热稳定性。 测得改性酚醛树脂的断裂伸长率、冲击强度、抗拉强度分别为2.8%、2.875 kJ/m2和23.2 MPa;树脂失重20%的温度为431.28 ℃,峰值温度为441.8 ℃,800 ℃的残重率为51.02%。     

Co改性高残炭率酚醛树脂的合成研究

以亚氨基二乙酸为螯合剂,采用配位法在热固性酚醛树脂中引入Co离子,通过热失重(TGA)、扫描电子显微镜(SEM)、红外光谱(FT-IR)和X射线光电子能谱(XPS)等表征对Co改性的酚醛树脂进行分析。FT-IR发现Co离子以配位键方式成功地引入到了树脂结构中;XPS发现酚醛树脂中存在配位结构;TGA发现酚醛树脂经过改性后的热稳定性明显提高;SEM发现通过Co改性的方式,树脂在结构中排布更加紧密。Co改性后的酚醛树脂其固含量和残炭率均有明显提高,分别达到87.19%和52.68%。     

硼酸与甲阶酚醛树脂的配位反应及配合物的结构

本文通过对溶液pH值的测定和外光谱分析，研究了硼酸与甲阶酚醛树脂的配位反应。结果表明：在室温下硼酸能与甲阶酚醛树脂中的羟基发生配位反应，并产生H^ 使溶液的pH值降低；溶液的酸性强弱与甲阶酚醛树脂中的羟甲基含量和硼酸的用量有关；硼酸以硼酸根离子的形式与树脂中的酚羟基和邻位羟甲基发生配位反应，形成了一个含有两个氧原子和一个硼原子的六元环，使甲阶酚醛树脂发生交联。     

木质素活化改性制备酚醛树脂胶黏剂研究进展

木质素由于化学结构与苯酚相似,通过活化改性可部分替代苯酚制备木质素改性酚醛树脂胶黏剂。既可降低成本、达到生物质资源高效利用的目的,并且制备的木质素改性酚醛树脂胶黏剂有毒残余较低,具有环保意义,是合成制备生物质高分子材料的重要途径。本文综述了国内外研究人员在木质素活化改性制备酚醛树脂胶黏剂研究领域的最新进展,重点介绍了化学改性、物理改性、生物改性等木质素活化改性方法,比较了不同改性产物制备酚醛树脂胶黏剂的性能,并对影响木质素活化改性制备酚醛树脂胶黏剂实现工业化应用的主要因素进行了分析。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.