梳型接枝共聚物的合成 (Ⅲ)氯代乙酸 (降冰片烯基) 甲酯的制备

从双环戊二烯与烯丙醇进行Diels-Alder反应合成了5-羟甲基2-降冰片烯2,后者在N.N-二甲基苯胺存在下与a-氯代乙酰氯反应,首次合成出了氯乙酸降冰片烯甲酯2,考察了反应条件 (温度、反应物摩尔比等) 对各步反应收率的影响.并对各步反应产物结构进行表征.     

梳形接枝共聚物的合成(Ⅱ)——载体化钌卡宾络合物催化降冰片烯基聚苯乙烯的开环岐化聚合

由石油化工副产C₅馏份提取双环戊二烯(DCPD)、以聚合物负载三氟化硼为催化剂进行DCPD与烯丙基氯(AC)的Diels-Alder反应合成5-氯甲基-2-降冰片烯(NBCH₂Cl),经锂代反应后用以引发苯乙烯的活性阴离子聚合合成了降冰片烯(NB)基聚苯乙烯(PS)大分子环烯单体NB-PS,在聚合物负载钌卡宾络合物[RuCl₂(PPh₃)₂(=C=CHtBu)]催化(引发)作用下进行大分子单体NB-PS的开环歧化聚合(ROMP)合成了梳形接枝共聚物PNB-g-PS.实验结果表明所合成聚合物负载硼、钌络合物催化剂的性能均明显优于对应非负载体.讨论了上述催化剂的聚合物载体效应的机理及温度、溶剂等对活性阴离子聚合反应的影响.     

三步法合成高封端率端氨基聚乳酸

叔丁氧羰基碳酸酐((Boc)2O)和氨基丙醇反应合成叔丁氧羰基氨基丙醇(Boc-氨基丙醇),以此为引发剂在辛酸亚锡的催化下,引发L-丙交酯开环聚合合成叔丁氧羰基氨基封端聚乳酸(BocNH-PLLA),叔丁氧羰基(Boc)经三氟乙酸处理脱除后得到端氨基聚乳酸(PLLA-NH2).以PLLA-NH2为大分子引发剂,引发ω-苄氧羰基L-赖氨酸-N-羧酸酐(ω-Z-L-Lysine-NCA)开环聚合,合成聚L-乳酸-聚ω-苄氧羰基L-赖氨酸两嵌段共聚物(P(LLA-LLz)).采用红外光谱(FT-IR)、核磁共振氢谱(1H-NMR)、凝胶渗透色谱(GPC)对聚合物结构进行了表征.结果表明:PLLA-NH2端基亲核性明显提高,可引发ω-Z-L-Lysine-NCA开环聚合制备嵌段共聚物,PLLA-NH2的合成方法简便,氨基封端率高,其分子量和单体与引发剂的摩尔比具有良好的线性关系.     

6-烯-8-羰基-1-叔丁氧基羰基氮杂螺[4,4]壬烷的合成

以烯丙基脯氨酸甲酯(1)为起始原料, 经7步反应以42%的总收率得到了三尖杉碱合成中的重要中间体6-烯-8-羰基-1-叔丁氧基羰基氮杂螺[4,4]壬烷(7). 关键反应为构筑螺环季碳的[2,3]斯蒂文森重排(Stevens rearrangement)及烯丙基双键加氧的酸内酯化反应(Acid-lactonization reaction).     

载体化络合催化开环歧化聚合合成梳形接枝共聚物研究

由环戊二烯（CPD）及烯丙基氯（AC）经聚合物支载三氟化硼催化的Diels-Alder反应合成了5-氯甲基-2-降冰片烯（NB-CH2Cl),锂代后用以引发甲基丙烯酸甲酯（MMA）及苯乙烯（S）的活性阴离子聚合,合成了带聚合物取代基的降冰片烯大分子单体NB-PMMA及NB-PS。在聚合物支载钌卡宾络合物催化作用下进行所合成大分子单体的开环歧化聚合反应（ROMP）,合成了二种接枝于开环歧化聚降冰片烯（PNB）主链的梳形接技共聚物PNB-g-PMMA及PNB-g-PS。实验结果表明所研制聚合物支载硼、钌络合物催化性能明显优于对应非支载活性种。     

氯乙酸降冰片烯甲酯制备方法的改进

在环烯烃开环歧化聚合反应(ROMP)中,降冰片烯类是一类应用的最多的单体。为合成具有高反应活性的单体,选择双环戊二烯与烯丙醇隔绝空气下的Diels-Alder反应,产物与α-氯代乙酰氯反应得到氯乙酸降冰片烯甲酯,在实验中对反应的温度、时间、比例等条件进行进一步精确。     

双环戊二烯

双环戊二烯是石油裂解 C_5馏分和煤焦油苯头馏分中一种重要的烯烃。来源丰富、价廉易得,被广泛地应用在聚合物材料和有机化学产品方面,作为一种新型有机化工原料和有机化学试剂具有广阔的发展前景。分子结构双环戊二烯(Dicyclopentadiene,简称 DCPD)系环戊二烯(Cyclopentadiene,简称 CPD)的二聚体,分子式 C_(10)H_(12),属降冰片烯类。     

梳型接枝共聚物的合成（Ⅲ）——氯代乙酸（降冰片稀基）甲酯的制备

从双环戊二烯与烯丙醇进行Diels-Alder反应合成了5－羟甲基2－降冰片烯2，后者在N.N－二甲基苯胺存在下与a－氯代乙酰氯反应，首次合成了氯乙酸降冰片烯甲酯2，考察了反庆条件（温度、反应物摩尔比等）对各步反应收率的影响，并对各步反应产物结构进行表征。     

手性γ-氨基酸:5-羟基-3-氨基环己基甲酸的不对称合成

以光学纯的(1S,5S)-5-叔丁氧羰基氨基-3-环己烯基甲酸为原料,经立体选择性地碘代内酯化、脱碘、醇解、水解、酯化5步反应首次合成了两个光学纯的γ-氨基酸衍生物——(1R,3S,5R)-5-羟基-3-叔丁氧羰基氨基环己基甲酸甲酯(总收率36.7%)和(1R,3S,5R)-5-羟基-3-叔丁氧羰基氨基环己基甲酸苄酯(总收率35.2%),其结构经1H NMR,13C NMR,IR和ESI-HR-MS确证。     

沙库必曲中间体(R)-2-(叔丁氧羰基氨基)-3-(联苯-4-基)丙醇的合成

采用D-酪氨酸衍生物为原料,与苯磺酰氯反应制得叔丁氧羰基保护的D-苯丙氨醇苯磺酸酯,经还原,再在5 mol% N-杂环卡宾(NHC)钯催化剂(IMes)Pd(Py)Cl作用下与苯硼酸经过Suzuki-Miyaura偶联反应得到沙库必曲重要中间体(R)-2-(叔丁氧羰基氨基)-3-(联苯-4-基)丙醇,总产率大于57%,ee值大于99%。     

混杂聚合

混杂聚合是指同一体系内有两种或两种以上不同类型的聚合反应同时进行的过程,如自由基聚合与阳离子聚合,自由基聚合与缩聚等。混杂聚合能够在原位形成高分子合金,并有可能得到互穿网络结构（ＩＰＮ）,从而使聚合产物具备较好的综合性能。     

Kinetic study of the nitroxide‐mediated controlled free‐radical polymerization of n‐butyl acrylate in aqueous miniemulsions

The controlled free‐radical homopolymerization of n‐butyl acrylate was studied in aqueous miniemulsions at 112 and 125 °C with a low molar mass alkoxyamine unimolecular initiator and an acyclic β‐phosphonylated nitroxide mediator, N‐tert‐butyl‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl) nitroxide, also called SG1. The polymerizations led to stable latices with 20 wt % solids and were obtained with neither coagulation during synthesis nor destabilization over time. However, in contrast to latices obtained via classical free‐radical polymerization, the average particle size of the final latices was large, with broad particle size distributions. The initial [SG1]₀/[alkoxyamine]₀ molar ratio was shown to control the rate of polymerization. The fraction of SG1 released upon macroradical self‐termination was small with respect to the initial alkoxyamine concentration, indicating a very low fraction of dead chains. Average molar masses were controlled by the initial concentration of alkoxyamine and increased linearly with monomer conversion. The molar mass distribution was narrow, depending on the initial concentration of free nitroxide in the system. The initiator efficiency was lower than 1 at 112 °C but was very significantly improved when either a macroinitiator was used at 112 °C or the polymerization temperature was raised to 125 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4410–4420, 2002     

Simple polymerization through oxygen at reduced volumes using oil and water

An enduring question is: what is the simplest and easiest way to obtain tailored polymers? This communication explores a robust photoiniferter polymerization with only two active ingredients that requires no prior deoxygenation and can be performed on the milliliter scale or sub-milliliter scale. Rather than leaving headspace in the polymerization vessel or scaling reactions up to fill the vessel, this approach fills the headspace of the reaction vessel with mineral oil or inert solvents. This approach can also be applied to polar monomers in aqueous media, using oil as the inert solvent, or to hydrophobic monomers with water as the inert solvent. This method removes enough ambient oxygen that the photoiniferter reaction proceeds with no deoxygenation step, and achieves high conversion and good molecular weight control in 10–20 h in both aqueous and organic solvents. Complex polymer architectures such as multiblock copolymers and gradient polymers were successfully synthesized by this approach.     

丙烯酸2-乙基己酯/丙烯酸辐射乳液聚合——乳胶中羧基的分布

本文用辐射法引发丙烯酸2-乙基己酯/丙烯酸(EHA/AA)乳液共聚合,用酸碱反滴定法研究了剂量率、剂量、乳化剂浓度、固含量、共聚物分子量、丙烯酸浓度、丙烯酸加料方式及丙烯酸预先中和程度等反应条件对乳胶中羧酸可滴定百分比的影响。并对聚合机理作了初步探讨。     

再活化链式聚合

基于传统的链式聚合和逐步聚合二种高分子链增长过程,提出了再活化链式聚合。按此聚合机理,高分子的链增长是通过将一个非活性或睡眠状态的链(Mm)重新活化为活性种(Mm*),活性种再和一个单体(M)反应,生成一个较大分子量的休眠产物(Mm 1)来实现的。再活化链式聚合主要例子包括苯胺和或许其它芳香族单体的氧化聚合,活性自由基聚合,以及核酸和蛋白质合成中的生物聚合。     

乳液原子转移自由基聚合*

原子转移自由基聚合(ATRP)应用于乳液聚合体系的主要挑战在于如何同时保证乳液的稳定性和聚合反应的可控性。本文主要对乳液ATRP体系中影响聚合反应可控性和乳液稳定性的各种因素、乳液ATRP的机理和乳液ATRP的应用等方面进行了综述。表面活性剂亲水亲油性及其亲水亲油基团的化学性质、催化剂/配体在油/水两相之间的分配行为、引发剂的溶解性、反应温度以及各组分的浓度是影响反应可控性和乳液稳定性的主要因素。各组分在油/水两相中的分配行为使得乳液ATRP的机理比传统乳液聚合更加复杂。乳液原子转移自由基聚合结合了活性自由基聚合和乳液聚合的优点,在理论研究和工业生产上具有很大的应用前景。     

Reverse Iodine Transfer Polymerization (RITP) in Emulsion

Reverse iodine transfer polymerization (RITP) is a new controlled radical polymerization technique based on the use of molecular iodine I₂ as control agent. This paper aims at presenting the basics of RITP and the strategy that we have followed for the development of this process in the past three years, from the validation in homogeneous solution polymerization up to recent results in heterogeneous aqueous polymerization processes. Typical examples of RITP of butyl acrylate in emulsion and RITP of styrene in miniemulsion are discussed.     

烯烃配位活性聚合研究的新进展

从活性聚合的特征、催化剂的结构和特点、聚合单体的种类、以及控制工艺条件的重要性4个方面．评述了近年来烯烃配位活性聚合研究的进展状况。     

Liquid-Crystalline Polymer Particles Prepared by Classical Polymerization Techniques

Liquid-crystalline polymer particles prepared by classical polymerization techniques are receiving increased attention as promising candidates for use in a variety of applications including micro-actuators, structurally colored objects, and absorbents. These particles have anisotropic molecular order and liquid-crystalline phases that distinguish them from conventional polymer particles. In this minireview, the preparation of liquid-crystalline polymer particles from classical suspension, (mini-)emulsion, dispersion, and precipitation polymerization reactions are discussed. The particle sizes, molecular orientations, and liquid-crystalline phases produced by each technique are summarized and compared. We conclude with a discussion of the challenges and prospects of the preparation of liquid-crystalline polymer particles by classical polymerization techniques.