铜、锰氧化物的表面过剩氧及其甲苯催化燃烧活性

研究了负载型Ｃｕ－Ｍｎ－Ｏ催化剂对烃类深度氧化的活性，并将ＸＲＤ分析、电子探针考察和表面过剩氧浓度的分布测定等结果与催化剂活性进行了关联．以甲苯催化燃烧为模型反应，除用常规的微反考察其动力学性质外，还用脉冲反应技术研究了表面过剩氧的氧化功能和甲苯的吸附等．Ｍｎ／Ｃｕ原子比为０．８８～０．９时，催化剂活性最好．这是由ＣｕＯ和ＣｕＭｎ２Ｏ４的功能匹配决定的，后者提供与催化作用有关的表面过剩氧，前者促进甲苯的吸附．对催化剂的作用机理也进行了初步的探讨．     

铜,锰氧化物的表面过剩氧及其甲苯催化燃烧活性

研究了负载型Ｃｕ－Ｍｎ－Ｏ催化剂对烃类深度氧化的活性，并将ＸＲＤ分析、电子探针考察和表面过剩氧浓度的分布测定等结果与催化剂活性进行了关联。以甲苯催化燃烧为模型反应，除用常规的微反考察其动力学性质外，还用脉冲反应技术研究了表面过剩氧的氧化功能和甲苯的吸附等。Ｍｎ／Ｃｕ原子比为０．８８～０．９时，催化剂活性最好。这是由ＣｕＯ和ＣｕＭｎ２Ｏ４的功能匹配决定的，后者提供与催化作用有关的表面过剩氧，前者促进     

Pt／NM,Pd／NM催化剂上甲苯深度氧化反应动力学

在氧气过量的条件下，考察了Ｐｔ／ＮＭ、Ｐｄ／ＮＭ催化剂上甲苯深度氧化反应动力学及反应活性。Ｐｔ／ＮＭ催化剂对甲苯的氢化活性高于Ｐｄ／ＮＭ，深度氧化反应服从反应物强吸附双分子反应Ｌｔａｎｇｍｕｉｒ－Ｈｉｎｓｈｅｌｗｏｏｄ机理，其动力学方程为：相应的动力学参数，Ｐｔ／ＮＭ为：活化能△Ｅ＝４９．９ｋＪ／ｍｏｌ，吸附热Ｑ＝－２９．６ｋＪ／ｍｏｌ；Ｐｄ／ＮＭ为：△Ｅ＝９４．２ｋＪ／ｍｏｌ，Ｑ＝－１９．１ｋＪ／ｍｏｌ．     

EFFECTS OF ALKALI AND RARE EATTH METAL OXIDES ON THE THERMAL STABILITY AND THE CARBON DEPOSITION OVER A NiO/Al_2O_3 CATALYST

采用固定床流动反应装置、ＣＯ吸附、ＴＧ、ＴＰＯ、ＸＰＳ和ＸＲＤ等手段考察了ＮｉＯ／Ａｌ２Ｏ３和ＬｉＮｉＬａＯ／Ａｌ２Ｏ３催化剂上的甲烷部分氧化反应。实验结果表明，ＬｉＮｉＬａＯ／Ａｌ２Ｏ３对甲烷部分氧化反应具有较高的反应活性。锂和镧的添加不仅改善了活性组分镍的分散度，而且提高了ＮｉＯ／Ａｌ２Ｏ３的抗积碳能力和热稳定性     

硅胶负载钒磷氧化物催化2 ,6-二氯甲苯氨氧化反应(英)

对硅胶负载钒磷氧化物（ＶＰＯ） 催化剂（ ｎ（Ｖ）／ ｎ（Ｐ） ＝ １） 催化２ ,６二氯甲苯（ＤＣＴ） 氨氧化反应进行了研究． 考察了反应温度、空气／ＤＣＴ 比和氨／ＤＣＴ 比等因素对反应的影响． 反应温度对氨氧化反应影响较大,空气／ＤＣＴ比和氨／ＤＣＴ 比对反应的影响不很大． 最佳反应条件为： Ｔ＝ ６７３ Ｋ, ｎ（ａｉｒ）／ｎ（ＤＣＴ） ＝ ３０ , ｎ（ＮＨ３）／ｎ（ＤＣＴ）＝ ６ ． 在此条件下,ＤＣＴ转化率为９０ ％ , 产率为５７ ％ ． 与使用（ＮＨ４）２［（ＶＯ）３（Ｐ２Ｏ７）２］ 催化剂的文献报道值相比,反应温度降低４０ Ｋ, 产率提高３４ ％ ．ＸＲＤ分析结果表明, ＶＰＯ／ＳｉＯ２ 催化剂中的活性组分以均匀分散的无定形状态存在,而未负载的ＶＰＯ催化剂中存在αＶＯＰＯ４ 和βＶＯＰＯ４ 晶相．     

水相中金属铜表面生成亚铜—邻菲罗啉配合物的反应

本文研究了零价铜在邻菲罗啉水溶液中的反应。当溶液敞露于空气并存在有机阴离子Ｘ－时，例如苯甲酸盐（Ｂｚ）、对甲基苯磺酸盐（Ｔｓ）等，铜的表面生成了致密的反应产物的薄层，经ＩＲ、ＵＶ／ＶＩＳ、ＭＳ和元素分析证明了该薄层为相当纯的亚铜的邻菲罗啉配位化合物，结构为［Ｃｕ（ｐｈｅｎ）２］＋Ｘ－。在乙醇／甲苯混合溶剂中得到了表面反应产物的晶体［Ｃｕ（ｐｈｅｎ）２］（ＣＨ３Ｃ４Ｈ６ＳＯ３）Ｃ２Ｈ５ＯＨ，并用Ｘ－ｒａｙ测得了结构。本工作表明溶液中的ＣｕⅡ离子抑制Ｃｕ０氧化成ＣｕⅠ而影响反应层的形成，同时又促进ＣｕⅠ氧化成ＣｕⅡ的过程     

稀土氧化物对Ni／α—Al2O3催化甲烷部分氧化制合成气反应的影响

研究了稀土金属氧化物（Ｌａ２Ｏ３，ＣｅＯ２，Ｐｒ６Ｏ１１和Ｎｄ２Ｏ３）对Ｎｉ／α－Ａｌ２Ｏ３催化剂上甲烷部分氧化制合成气反应的影响．Ｘ光粉末衍射和活性考察结果表明，稀土氧化物使Ｎｉ／α－Ａｌ２Ｏ３催化剂的稳定性有显著提高．稀土氧化物与活性组份Ｎｉ之间的相互作用抑制了催化剂表面Ｎｉ晶粒的生长和迁移，由于这种作用也抑制了催化剂表面积炭的生成．在实验中还发现ＣｅＯ２容易进行Ｃｅ３＋Ｃｅ４＋氧化还原反应而对反应具有催化活性．     

甲苯气相选择性氧化制苯甲醛 Ⅰ．V_2O_5／TiO_2－Al_2O_3催化剂研究

制备了一系列负载型Ｖ－Ｔｉ－Ａｌ－Ｏ催化剂并用于甲苯的气相选择性氧化制苯甲醛，考察了接触时间、氧浓度、Ｖ２Ｏ５负载量以及催化剂焙烧温度对反应性能的影响。用ＴＰＲ、ＸＲＤ和ＢＥＴ等测试手段，对催化剂进行了表征。研究发现，催化剂在７７３Ｋ时活化，接触时间１．２秒，氧浓度２１％时，可获得较好的反应结果，Ｖ２Ｏ５负载量为６（ｗｔ）％的催化剂，在５９３Ｋ时反应，得到了转化率２０．５％，苯甲醛产率８．３％的最好结果。     

UO2（OX）2（tbpo）配合物的合成,表征与结构研究

ＵＯ２（ＮＯ３）２．６Ｈ２Ｏ和８－羟基喹啉（ＨＯＸ）反应制得ＵＯ２（ＯＸ）２，后者与三丁基氧化膦（ＴＢＰＯ）反应合成了ＵＯ２（ＯＸ）（ｔｂｐｏ），并用元素分析、电子光谱、红外光谱等方法对该配合物进行了表征。Ｘ射线单晶测定表明配合物晶体（Ｃ３０Ｈ３９Ｎ２Ｏ５ＰＵ）属单斜晶系，Ｐ２１／ｎ空间群，ａ＝１３．６６２（４），ｂ＝９．７４７（３），ｃ＝２２．９９９（８）Ａ，β＝９３．２１（３）°Ｖ＝３０５７．     

甲苯甲醇侧链烷基化反应中沸石催化剂酸碱中心的作用Ⅰ．改性的X型、X／ZSM－5型和KX型沸石催化剂

甲苯甲醇侧链烷基化反应中沸石催化剂酸碱中心的作用Ⅰ．改性的Ｘ型、Ｘ／ＺＳＭ－５型和ＫＸ型沸石催化剂李永光，畅晋英，王建平（太原工业大学化工系，太原０３００２４）关链词沸石，侧链烷基化，甲苯，甲醇甲苯甲醇烷基化反应有两种方式：在苯环上烷基化生成二甲苯；...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.