氮掺杂还原氧化石墨烯负载铂催化剂的制备及甲醇电氧化性能

采用高温热解聚苯胺修饰的氧化石墨烯(PANI-GO),得到了氮掺杂的还原氧化石墨烯碳材料(N-RGO),以其负载Pt制备了Pt/N-RGO纳米结构电催化剂.采用透射电镜(TEM)、X射线光电子能谱(XPS)、X射线衍射(XRD)谱及拉曼光谱等技术对N-RGO和Pt/N-RGO的形貌及结构进行了表征,用循环伏安、计时电流等电化学技术研究了Pt/N-RGO电极催化剂对CO溶出反应和甲醇电氧化反应的催化性能.结果表明:高温热解PANIGO可同时实现GO的还原及其氮掺杂的过程,氮掺杂引起还原氧化石墨烯碳材料表面缺陷结构和导电性的增加;与相应的未掺杂氮样品Pt/RGO相比较,Pt/N-RGO样品上Pt颗粒的分散更均匀,显示出更强的抗CO毒化能力和更高的甲醇电氧化催化活性及稳定性.     

Ti3C2Tx-MXene-聚二烯丙基二甲基氯化铵-还原氧化石墨烯复合膜修饰电极检测碘酸盐

通过静电组装法制备了Ti₃C₂T_x-MXene-聚二烯丙基二甲基氯化铵(PDDA)-还原氧化石墨烯(r GO)复合材料(Ti₃C₂T_x-MXene-PDDA-r GO),将其修饰在玻碳电极(GCE)表面,用于碘酸盐的电化学检测。采用氢氟酸(HF)刻蚀钛碳化铝(Ti₃Al C₂)法制备了Ti₃C₂T_x-Mxene,以水合肼为还原剂制备了PDDA功能化的r GO(PDDA-r GO)。将MXene加入PDDA-r GO分散液中,通过带正电的PDDA与表面带负电荷的Ti₃C₂T_x-MXene间的静电相互作用,制得Ti₃C₂T_x-MXene-PDDA-r GO复合材料。采用扫描电镜(SEM)、能谱(EDS)、X射线粉末衍射仪(...     

一步法制备还原态氧化石墨烯载铂纳米粒子及其对甲醇氧化的电催化性能

以天然石墨为原料,采用改进的Hummers法制备氧化石墨.然后采用简单的一步化学还原法在乙二醇(EG)中同时还原氧化石墨烯(GO)和H₂PtCl₆制备高分散的铂/还原态氧化石墨烯(Pt/RGO)催化剂.采用傅里叶变换红外(FTIR)光谱、X射线衍射(XRD)和透射电子显微镜(TEM)对催化剂的微结构、组成和形貌进行表征.结果表明, GO已被还原成RGO, Pt纳米粒子均匀分散在RGO表面,粒径约为2.3 nm.采用循环伏安法和计时电流法评价催化剂对甲醇氧化的电催化性能,测试结果表明, Pt/RGO催化剂对甲醇氧化的电催化活性和稳定性与Pt/C和Pt/CNT相比有了很大提高.另外其对甲醇电催化氧化的循环伏安图中正扫峰电流密度(I_f)和反扫峰电流密度(I_b)的比值高达1.3,分别是Pt/C和Pt/CNT催化剂的2.2和1.9倍,表明Pt/RGO催化剂具有高的抗甲醇氧化中间体CO_ad的中毒能力.     

微波法制备还原氧化石墨烯负载Pt_3Co纳米合金(英文)

微波辐射法可以在数分钟内将高度分散的Pt3Co合金颗粒负载于还原氧化石墨烯表面上.表征结果发现,与传统的溶剂热法和浸渍法相比,微波法制备的催化剂中贵金属的利用率高,合金颗粒的分布均匀,组成可控,同时氧化石墨烯的再石墨化现象也得到有效地抑制.采用微波法制备的Pt3Co/RGO-MW催化剂在肉桂醛加氢反应中具有较高的活性和和产物选择性.Pt3Co/RGO-MW中每一个Pt原子在70℃的转化频率高达23.8 min-1.     

微波法制备还原氧化石墨烯负载Pt3Co纳米合金（英文）

微波辐射法可以在数分钟内将高度分散的Pt3Co合金颗粒负载于还原氧化石墨烯表面上.表征结果发现,与传统的溶剂热法和浸渍法相比,微波法制备的催化剂中贵金属的利用率高,合金颗粒的分布均匀,组成可控,同时氧化石墨烯的再石墨化现象也得到有效地抑制.采用微波法制备的Pt3Co/RGO-MW催化剂在肉桂醛加氢反应中具有较高的活性和和产物选择性.Pt3Co/RGO-MW中每一个Pt原子在70℃的转化频率高达23.8 min-1.     

氮掺杂还原氧化石墨烯负载铂催化剂的制备及甲醇电氧化性能

采用高温热解聚苯胺修饰的氧化石墨烯（PANI-GO）,得到了氮掺杂的还原氧化石墨烯碳材料（N-RGO）,以其负载Pt 制备了Pt/N-RGO纳米结构电催化剂. 采用透射电镜（TEM）、X射线光电子能谱（XPS）、X 射线衍射（XRD）谱及拉曼光谱等技术对N-RGO和Pt/N-RGO的形貌及结构进行了表征,用循环伏安、计时电流等电化学技术研究了Pt/N-RGO电极催化剂对CO溶出反应和甲醇电氧化反应的催化性能. 结果表明：高温热解PANIGO可同时实现GO的还原及其氮掺杂的过程,氮掺杂引起还原氧化石墨烯碳材料表面缺陷结构和导电性的增加;与相应的未掺杂氮样品Pt/RGO相比较,Pt/N-RGO样品上Pt 颗粒的分散更均匀,显示出更强的抗CO毒化能力和更高的甲醇电氧化催化活性及稳定性.     

PDDA修饰的碳纳米管载铂电催化剂的合成及其在碱性条件下的氧气还原反应催化性能

采用长链聚合物聚二烯丙基二甲基氯化铵(PDDA)对多壁碳纳米管(MWCNTs)进行修饰,并将采用胶体法还原出的铂(Pt)纳米粒子通过静电作用担载于PDDA修饰的多壁碳纳米管上,从而制备出Pt/PDDA/MWCNTs复合电催化剂.透射电镜(TEM)与X射线衍射(XRD)测试结果表明, Pt纳米粒子均匀地分布在MWCNTs的表面,其平均粒径约为3.6 nm.热失重分析显示催化剂的实际负载量为36%(w).旋转圆盘电极测试结果表明, Pt/PDDA/MWCNTs催化剂对碱性条件下的氧气还原反应(ORR)具有优异的催化活性.与负载量为40%(w)的商业Pt/C催化剂相比, Pt/PDDA/MWCNTs催化剂的氧气还原反应的起始电位和半波电位均正移约30 mV,其质量比活性更大.动力学研究结果进一步证实Pt/PDDA/MWCNTs催化剂比负载量为40%(w)的商业Pt/C催化剂在碱性条件下对氧气还原反应具有更优异的催化活性.     

ZIF-67/石墨烯复合物衍生的氮掺杂碳限域Co纳米颗粒用于高效电催化氧还原

燃料电池阴极氧还原(ORR)催化剂目前主要以商业Pt/C为主, 其高成本和稀缺性极大地限制了燃料电池的广泛应用. 为了替代Pt/C催化剂, 廉价高效的非贵金属催化剂目前受到了广泛的研究和关注. 利用氧化石墨烯(GO)为诱导模板, 借助表面丰富的含氧官能团, 实现了Co基金属有机框架材料(MOF) (ZIF-67)在GO表面的原位生长, 构筑了ZIF-67/GO层状复合材料. 热解过程中, 石墨烯的存在有效抑制了Co纳米颗粒的团聚, 并且很好地维持了原始的层状结构. 最终获得的Co@N-C/rGO复合催化剂材料实现了活性位的高度分散, 并且具有丰富的孔结构和优异的导电性能. 在电化学性能测试中Co@N-C/rGO表现出优异的ORR性能, 其起始电位为0.96 V, 半波电位0.83 V, 远优于ZIF-67直接热解得到的Co@N-C材料, 且性能与商业Pt/C催化剂相当. 此外, Co@N-C/rGO复合催化剂还表现出良好的催化稳定性和甲醇耐受性, 显示出该材料作为燃料电池氧还原催化剂的重要潜力.     

氮掺杂石墨烯的制备及氧还原电催化性能

采用两步热解法, 用尿素掺杂氧化石墨烯(GO)得到N掺杂的还原氧化石墨烯(N-RGO), 通过控制反应温度, 制备了具有不同电催化活性的N掺杂的还原氧化石墨烯. 透射电子显微镜(TEM)和扫描电子显微镜(SEM)结果显示, 制得的氮掺杂石墨烯(nG)表面褶皱和重叠增加. X射线光电子能谱(XPS)证明, 氮元素以吡啶N、 吡咯N和石墨化的N 3种形式掺杂在石墨烯中, 最高摩尔分数为6.6%. 通过循环伏安(CV)和旋转圆盘电极(RDE)测试了nG的电化学性能, 结果表明, 在酸性电解质中对氧还原(ORR)有较高的催化活性, 起始电位在0.1 V左右, 电催化还原氧气时主要为四电子反应, 且相对商用的Pt/C催化剂有更好的电化学稳定性, 其中第一步热解温度为200℃制得的nG催化性能最好.     

碳网封装Fe3O4/还原氧化石墨烯锂离子电池负极材料

通过简单有效的溶剂热法将Fe3 O4颗粒与氧化石墨烯(GO)进行复合,得到Fe3 O4/GO复合材料.将Fe3 O4/GO与葡萄糖进行碾磨.在高温下将GO还原成还原氧化石墨烯(rGO)的同时在Fe3 O4/rGO表面制备网状结构的导电碳层,得到三维网络传输结构C/Fe3 O4/rGO复合材料.由碳网和还原氧化石墨烯组成...     

Controllable deposition of a platinum nanoparticle ensemble on a polyaniline/graphene hybrid as a novel electrode material for electrochemical sensing

We demonstrate for the first time an interfacial polymerization method for the synthesis of high-quality polyaniline-modified graphene nanosheets (PANI/GNs), which represents a novel type of graphene/polymer heterostructure. The interfacial polymerization at a liquid-liquid interface allows PANI to grow uniformly on the surface of the GNs. An ultra-high loading of Pt nanoparticles was then controllably deposited on the surface of the PANI/GNs to form a Pt/PANI/GNs hybrid. The obtained composites were characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive spectrometry, X-ray diffraction, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The Pt/PANI/GNs hybrid shows excellent electrocatalytic activity toward methanol oxidation and oxygen reduction. H(2)O(2) and glucose were used as two representative analytes to demonstrate the sensing performance of a Pt/PANI/GNs-modified electrode. It is found that this sensing element shows high sensitivity and a low detection limit for H(2)O(2) and glucose. The results demonstrate that the Pt/PANI/GNs hybrid may be an attractive and advanced electrode material with potential applications in the construction of electrochemical sensors and biosensors.     

Covalent hybrid of spinel manganese-cobalt oxide and graphene as advanced oxygen reduction electrocatalysts

Through direct nanoparticle nucleation and growth on nitrogen doped, reduced graphene oxide sheets and cation substitution of spinel Co(3)O(4) nanoparticles, a manganese-cobalt spinel MnCo(2)O(4)/graphene hybrid was developed as a highly efficient electrocatalyst for oxygen reduction reaction (ORR) in alkaline conditions. Electrochemical and X-ray near-edge structure (XANES) investigations revealed that the nucleation and growth method for forming inorganic-nanocarbon hybrids results in covalent coupling between spinel oxide nanoparticles and N-doped reduced graphene oxide (N-rmGO) sheets. Carbon K-edge and nitrogen K-edge XANES showed strongly perturbed C-O and C-N bonding in the N-rmGO sheet, suggesting the formation of C-O-metal and C-N-metal bonds between N-doped graphene oxide and spinel oxide nanoparticles. Co L-edge and Mn L-edge XANES suggested substitution of Co(3+) sites by Mn(3+), which increased the activity of the catalytic sites in the hybrid materials, further boosting the ORR activity compared with the pure cobalt oxide hybrid. The covalently bonded hybrid afforded much greater activity and durability than the physical mixture of nanoparticles and carbon materials including N-rmGO. At the same mass loading, the MnCo(2)O(4)/N-graphene hybrid can outperform Pt/C in ORR current density at medium overpotentials with stability superior to Pt/C in alkaline solutions.     

The MOF/GO-based derivatives with Co@CoO core-shell structure supported on the N-doped graphene as electrocatalyst for oxygen reduction reaction

The development of nonprecious catalyst for oxygen reduction reaction (ORR) is important for the commercialization of the alkaline fuel cells (AFCs). Herein, we prepared a kind of Co-based nanoparticles (NPs) with a core-shell (Co@CoO) structure supported on the N-doped graphene (Co@CoO/NG) as an efficient ORR catalyst via simply pyrolyzing the ZIF-67 anchored on the synthesized graphene oxide (GO). The catalytic activity for ORR of the obtained Co@CoO/NG is comparable with the state-of-art Pt/C catalyst in terms of the onset and half-wave potential in the alkaline solution. In addition, the Co@CoO/NG exhibited an excellent ORR durability and antimethanol activity compared to the commercial Pt/C. This research would provide a simple strategy to prepare the high-performance nonprecious metal-based catalysts for AFCs.     

Controllable synthesis, magnetism and solubility enhancement of graphene nanosheets/magnetite hybrid material by covalent bonding

Hybrids of Fe(3)O(4) nanoparticles and surface-modified graphene nanosheets (GNs) were synthesized by a two-step process. First, graphene nanosheets were modified by SOCl(2) and 4-aminophenoxyphthalonitrile to introduce nitrile groups on their surface. Second, the nitrile groups of surface-modified graphene nanosheets were reacted with ferric ions on the surface of Fe(3)O(4) with the help of relatively high boiling point solvent ethylene glycol to form a GNs/Fe(3)O(4) hybrid. The covalent attachment of Fe(3)O(4) nanoparticles on the graphene nanosheet surface was confirmed by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray spectrometer (EDS) and scanning electron microscopy (SEM). TEM and HRTEM observations indicated that the sizes of the nanoparticles and their coverage density on GNs could be easily controlled by changing the concentration of the precursor and the weight ratio to GNs. Magnetic measurements showed that magnetization of the hybrid materials is strongly influenced by the reaction conditions. Chemically bonded by phthalocyanine, the solubility of as-synthesized GNs/Fe(3)O(4) hybrid materials was greatly enhanced, which was believed to have potential for applications in the fields of composites, wastewater treatment and biomaterials.     

三种碳材料上原位电沉积AuPt合金的催化性能

在碳纸(CP)及涂覆了碳粉科琴黑(KB)或石墨烯纳米片(GNs)的碳纸上,原位电沉积了Au Pt合金,制备成CP/Au Pt、CP/KB/Au Pt、CP/GNs/Au Pt三种空气电极。对比研究发现,以石墨烯纳米片为载体的CP/GNs/Au Pt空气电极上,Au Pt合金载量高,颗粒分散均匀,粒径约为100 nm,Au和Pt的含量分别为78.84%(n/n)和21.16%(n/n)。在0.1 mol·L-1 KOH溶液中氧还原反应的起峰电势为0.93 V,催化活性和稳定性优于其他两种空气电极。分析认为,石墨烯纳米片具有高导电性、高比表面积以及较多的缺陷活性位点,有利于Au Pt合金在其上均匀电沉积且沉积载量较高,同时GNs本身具有一定的催化活性,两者能够产生协同催化作用,提高了CP/GNs/Au Pt电极的催化性能。     

基于内嵌钴/氮掺杂多孔碳三维石墨烯笼的抗团聚高效氧还原电催化剂

氧还原反应是决定燃料电池、金属-空气电池等多种新型清洁能源存储与转化技术之性能与应用的关键反应. 铂及其合金是目前催化活性最好的氧还原反应催化剂,但其高昂的成本限制了规模化应用. 在小尺寸效应作用下,微纳米结构催化剂颗粒在电极制备与电化学反应过程中的团聚限制了催化剂本征催化活性的充分发挥. 本文基于喷雾热解技术,发展了一种基于内嵌钴/氮掺杂多孔碳三维石墨烯笼的高活性、抗团聚非贵金属氧还原反应催化剂. 此结构中,金属有机骨架化合物ZIF-67衍生的钴/氮掺杂多孔碳纳米结构是催化氧还原反应的活性中心,包覆其外的三维石墨烯笼不仅可在钴/氮掺杂碳纳米结构之间构建连续的三维载流子传导网络,且可高效抑制其在催化剂制备与电化学反应过程中的团聚与活性损失. 在碱性电解液中,此类非贵金属催化剂表现出可与铂基催化剂媲美的氧还原反应活性和优异的稳定性.     

三种碳材料上原位电沉积AuPt合金的催化性能

在碳纸（CP）及涂覆了碳粉科琴黑（KB）或石墨烯纳米片（GNs）的碳纸上,原位电沉积了AuPt合金,制备成CP/AuPt、CP/KB/AuPt、CP/GNs/AuPt三种空气电极。对比研究发现,以石墨烯纳米片为载体的CP/GNs/AuPt空气电极上,AuPt合金载量高,颗粒分散均匀,粒径约为100 nm左右,Au和Pt的含量分别为78.84%（n/n）和21.16%（n/n）。在0.1 mol·L^-1 KOH溶液中氧还原反应的起峰电势为0.93 V,催化活性和稳定性优于其他两种空气电极。分析认为,石墨烯纳米片具有高导电性、高比表面积以及较多的缺陷活性位点,有利于AuPt合金在其上均匀电沉积且沉积载量较高,同时GNs本身具有一定的催化活性,两者能够产生协同催化作用,提高了CP/GNs/AuPt电极的催化性能。     

还原态氧化石墨烯载Pd纳米催化剂对甲酸氧化的电催化性能

采用改进的Hummers法氧化石墨后,对其超声剥离成氧化石墨烯水溶液,继之通过乙二醇还原Pd金属离子和氧化石墨烯,得到了还原态氧化石墨烯（RGO）负载Pd纳米催化剂,并用于甲酸的电催化氧化.透射电子显微镜和X射线衍射结果显示：负载于RGO上的Pd粒子平均粒径为3.8nm,其优先在RGO的褶皱和边缘处生长.电化学测试表明：RGO上残存的含氧基团降低了Pd催化剂受CO毒化的程度,Pd/RGO催化剂表现出了较商业化Pd/C更高的电催化活性和更好的稳定性.     

Caging Porous Co-N-C Nanocomposites in 3D Graphene as Active and Aggregation-Resistant electrocatalyst for Oxygen Reduction Reaction北大核心CSCD

Oxygen reduction reaction (ORR) is the cornerstone reaction of many renewable energy technologies such as fuel cells and rechargeable metal-air batteries.The Pt-based electrocatalysts exhibit the highest activity toward ORR, but their large implementation is greatly prohibiting by unaffordable cost and inferior durability.During electrode manufacturing and electrochemical reaction, severe aggregation of catalyst nanoparticles induced by size effect further limits the operational performance of electrocatalysts.We report a new strategy for fabrication of active and aggregation-resistant ORR electrocatalyst by caging metal-organic frameworks derived Co-N-C nanocomposites in permeable and porous 3D graphene cages via sprayed drying the mixed colloids of ZIF-67 nanoparticles and graphene oxide, followed by annealing.The 3D graphene cages around Co-N-C nanocomposites not only provide a continuous conductive network for charge transfer, but also prevent the active phase from aggregation during electrode manufacturing and electrochemical reactions.When evaluated as an ORR electrocatalyst, the material exhibited comparable activity but superior stability to commercial Pt/C catalyst in an alkaline electrolyte. © 2018 Chinese Chemical Society. All rights reserved.     

In situ constructing of ultrastable ceramic@graphene core-shell architectures as advanced metal catalyst supports toward oxygen reduction

The changeable structure of 2 D graphene nanosheets makes the Pt-based nanoparticles(NPs) possess a low efficiency toward oxygen reduction reaction(ORR) and a short lifetime for proton exchange membrane fuel cells. Thus, a unique Ti C@graphene core-shell structure material with low surface energy is designed and prepared by an in situ forming strategy, and firstly applied as a stable support of Pt NPs.The as-prepared Pt/GNS@Ti C catalyst presents a high activity. Especially, its ORR stability is remarkably improved. Even after 15000 potential cycles, the half-wave potential and mass activity toward ORR have almost no change. This can be attributed to that the graphene nanosheet existing in a sphere shape effectively avoids the restacking or folding caused by the giant surface tension in 2 D graphene nanosheets,impeding the decrease of the triple-phase boundary on Pt NPs. Significantly, the power density of fuel cells with our novel catalyst reaches 853 m V cm~(–2) under a low Pt loading(0.25 mg Pt cm~(–2)) and H_2/Air conditions. These indicate the new ceramic@graphene core-shell nanocomposite is a promising application in fuel cells and other fields.