亚晶格能量团簇构建及晶场调控对四方LiYF4:RE上转换发光机制的影响研究

四方LiYF₄是一种与六方NaYF₄相当的稀土上转换发光基质材料,由于相对优异的短波上转换发光特性,近年受到业界的相当关注,但对产生这一优异特性的原因还未见报道.经研究发现,四方LiYF₄具有六边环状亚晶格结构,每5个间距小于0.4 nm的近邻三价阳离子形成一个团簇,稀土离子间的能量传递容易在团簇内或六边形环内环绕传递.基于它的这一亚晶格结构特征,本工作通过引入不同量敏化剂Yb³⁺和掺杂离子Sc³⁺和Hf⁴⁺,考察不同激活离子Er³⁺、Ho³⁺和Tm³⁺与敏化离子Yb³⁺构建亚晶格能量团簇以及异质离子Sc³⁺和Hf⁴⁺掺杂晶场调控对稀土离子上转换发光性能的影响机制.发现不同稀土离子与Yb³⁺存在不同的能级匹配,导致不同概率的无辐射交叉弛豫行为,当引入适量的Yb³⁺时,可分别构建1Er-2Yb、1Ho-2Yb和1Tm-4Yb亚晶格能量团簇,实现最佳的上转换发光性能;当6 mol% Sc³⁺和4 mol% Hf⁴⁺引入时,可有效调控晶场的不对称性;掺杂后,5个近邻三价离子的团簇结构中,只有3个近邻Yb³⁺离子,无法同时实现Er³⁺离子的⁴F_5/2和Sc³⁺的²G_7/2或Hf⁴⁺的⁴F_5/2^o激发态的双光子合作上转换电子布居,导致Sc³⁺或Hf⁴⁺成为荧光猝灭中心,Sc³⁺掺杂晶场调控最大仅提升50%的荧光强度,Hf⁴⁺掺杂没有提升反而降低Er³⁺离子的上转换发光强度,不同于它们掺杂六方NaYF₄：Er/Yb那样扮演储能离子角色,显著提升Er³⁺离子的短波上转换发光强度.本研究揭示了在六边环状亚晶格基质结构中不同稀土离子与敏化剂Yb³⁺的敏化上转换发光机制,以及基质结构特征对掺杂晶场调控行为的影响机制,可为设计和制备高性能上转换发光材料提供借鉴.     

Hf4+共掺NaYF4:Yb/Tm提高上转换发光性能研究

利用X射线多晶衍射仪、场发射扫描电镜、场发射透射电镜、X射线光电子能谱和荧光光谱仪对相近半径离子Hf⁴⁺和Zr⁴⁺共掺六方NaYF₄:Yb³⁺/Tm³⁺的结构、形貌和上转换发光性能进行研究.结果表明Hf⁴⁺和Zr⁴⁺离子共掺六方NaYF₄:Yb³⁺/Tm³⁺可有效调控晶场的不对称性, Hf⁴⁺相对于Zr⁴⁺是个更好的掺杂离子,它在调控晶场的同时还参与Tm³⁺离子上转换发光的能量传递过程,明显提高了短波500 nm以下发射带的荧光强度;而Zr⁴⁺离子仅扮演晶场调控角色而未能参与稀土离子Tm³⁺的上转换发光过程, Tm³⁺离子小于500 nm短波发射带的荧光强度没有得到明显的提高,仅提高802 nm发射带的荧光强度.该研究发现Hf⁴⁺可作为蓄能离子参与稀土离子的上转换发光过程,有助于将Hf⁴⁺作为蓄能离子和晶格操纵工具用于设计和制备其它高性能的稀土上转换发光材料.     

尺寸可控Zn1.4Ga1.97-2xO4∶1.5%Cr，xIn近红外发光长余辉纳米颗粒的制备及其光学性质

采用一步水热法,通过In³⁺的掺杂,获得了尺寸可控的近红外(NIR)发光ZGO∶1.5%Cr,xIn(Zn_1.4Ga_1.97-2xO₄∶1.5%Cr,xIn,x=0%、0.1%、0.2%、0.3%、0.4%、0.5%)长余辉纳米颗粒(PLNPs),考察了In³⁺掺杂量对ZGO∶1.5%Cr,xIn PLNPs尺寸大小、余辉发光性能以及晶体结构的影响。In³⁺的掺杂不仅能有效控制ZGO∶1.5%Cr,xIn PLNPs尺寸,还可以增强发光和余辉时间。结果表明,当In³⁺掺杂量为0.2%时,ZGO∶1.5%Cr,0.2%In PLNPs平均粒径为13.79 nm,分布最为均匀,粒径最小,NIR发光最强,余辉时间超过5 d,可通过LED灯再激发。In³⁺的掺杂对ZGO∶1.5%Cr,xIn PLNPs的晶体结构无影响,均为纯相的尖晶石结构。     

NaYF4:Yb3+/Er3+单颗粒微米棒偏振上转换发光及其取向示踪※

稀土掺杂微/纳材料的偏振上转换发光在单颗粒示踪和生物医学等领域具有广泛的应用前景. 稀土离子的偏振上转换发光主要取决于其局域态的电子结构和激发态动力学. 利用单颗粒偏振上转换光学测试平台对β-NaYF₄:Yb³⁺/ Er³⁺微米棒的偏振上转换发光进行了系统研究. 随发射偏振角的变化, 单个微米棒的上转换发光强度发生周期性改变, 且来自Er³⁺同一光谱支项的不同晶体场子能级跃迁的偏振方向不同. 与光谱支项整体的上转换发光相比, 其晶体场子能级上转换发光表现出更大的发射偏振度. 利用Er³⁺高度偏振的晶体场跃迁谱线, 实现了对单个微米棒空间取向的动态分析, 揭示了NaYF₄:Yb³⁺/Er³⁺微米棒作为偏振各向异性的上转换荧光探针在单颗粒取向示踪方面的潜在应用.     

基于上转换发光共振能量转移的CRISPR/Cas12a生物传感系统用于HPV16 DNA双信号检测

传统的纯核结构的上转换纳米材料用于生物传感时, 存在表面猝灭效应或者因发光共振能量转移(LRET)效率不高导致灵敏度低等缺点, 对目标物的灵敏检测有一定的局限性. 本文通过多步高温共沉淀, 介导壳层外延成长法, 合成了NaYF₄∶Yb³⁺,Er³⁺(C-UCNPs)核层发光和NaYF₄@NaYF₄∶Yb³⁺,Er³⁺@NaYF₄(CSS-UCNPs)内壳层发光能量限域型上转换纳米材料, 并表征了材料的晶型、 形貌、 表面配体、 元素组成和发光共振能量转移效率. 结果表明, 该材料具有表面猝灭效应低、 发光共振转移效率较高的优势, 随后将其与成簇规律间隔的短回文重复序列及其相关蛋白(CRISPR/Cas)12a-纳米金系统结合, 实现了人乳头瘤病毒DNA(HPV16 DNA)的比色定性和上转换发光定量分析, 检出限为69.8 pmol/L, 双信号检测有效提高了检测结果的准确性. 此外, 本方法不仅特异性强, 还能识别单碱基错配的HPV16 DNA, 提高了DNA片段的容错率.     

稀土上转换发光材料标记抗体的制备及在免疫组化中的应用

采用微波辐射法合成了具有上转换发光特性的六方相纳米粒子NaGdF₄: Yb³⁺,Er³⁺(UCNPs), 其晶粒大小约为65 nm, 且粒子在980 nm的激发光下显示绿光(550 nm). 进一步在NaGdF₄: Yb³⁺,Er³⁺纳米晶的表面包覆了一层二氧化硅层, 进行氨基功能化后获得了表面共价结合氨基基团的粒径为70 nm的上转换发光纳米微球NaGdF₄: Yb³⁺,Er³⁺@SiO₂-NH₂(UCNPs@SiO₂-NH₂). 通过共价键将UCNPs@SiO₂-NH₂与多克隆抗体免疫球蛋白联接, 将标记后的多克隆抗体应用于传统的免疫组化检测子宫内膜腺细胞中基质金属蛋白酶组织抑制剂-4(TIMP-4)蛋白的表达. 结果表明, 微波合成的稀土上转换发光纳米材料形貌规则且粒径均一, 包覆硅壳后材料具有良好的分散性和水溶性, 荧光强度高且稳定, 在980 nm激发光下对生物组织无背景荧光, 可以很好地检测组织中蛋白质的表达.     

KMnF3的熔盐法合成及掺铕体系的发光性质

采用简单的熔盐法合成了KMnF₃单相样品及稀土离子铕掺杂的KMnF₃（KMnF₃：Eu）荧光样品. X射线粉末衍射（XRD）表征结果显示,KMnF₃属立方晶系,为AMF₃型钙钛矿结构氟化物. 对样品KMnF₃：Eu的发光性质进行了研究,荧光光谱分析结果表明,Mn²⁺,Eu²⁺与Eu³⁺这3个发光中心共存于KMnF₃：Eu体系中. 讨论了改变掺入Eu离子的摩尔分数对Mn²⁺,Eu²⁺以及Eu³⁺发光强度的影响.     

氟离子浓度对稀土掺杂上转换发光纳米材料形貌及荧光寿命的影响

利用溶剂热法制备了Yb³⁺、Er³⁺共掺的NaYF₄上转换发光纳米材料。实验结果表明,不同F^-离子对纳米晶的晶型和粒径尺寸起着重要的作用。低F^-离子浓度下,NaYF₄纳米材料的粒径尺寸随F^-离子浓度的增加逐渐变小且趋于均一;高F^-离子浓度下,六方晶相的形成受到抑制,上转换纳米晶出现团聚现象。在一定浓度范围内,F^-离子的浓度有利于促进荧光发射。同时F^-离子浓度对荧光寿命也有显著的影响。     

Tm3+掺杂的NaYF4微米颗粒中强烈的单带下转换荧光发射

采用柠檬酸钠辅助的水热方法合成了一系列具有不同长径比的Tm³⁺掺杂的β-NaYF₄ (NaYF:Tm³⁺)微米棒(盘).通过X射线衍射(XRD),扫描电子显微镜(SEM),能量色散X射线荧光光谱(EDX),傅里叶变换红外(FTIR)光谱和激光光谱学等手段对所制备的系列β-NaYF₄微米棒(盘)进行了表征. XRD和SEM分析表明β-NaYF₄微米棒(盘)的长径比依赖于前驱液的pH值,随着前驱液的pH值的增加,从长棒逐渐过渡到六角盘.光谱测量结果表明:一系列NaYF₄:Tm³⁺微米晶体在656 nm脉冲激光选择激发下,均获得了强烈的单带近红外下转换荧光发射.系统研究了激发波长、环境温度和颗粒长径比对NaYF₄:Tm³⁺微米晶体中单带近红外荧光强度的调控.结果表明:颗粒长径比越大,荧光强度越强.进一步探索了颗粒长径比调控的荧光增强机理,并提出了基于长径比控制的缺陷空位机理.     

稀土Yb3+/Tm3+掺杂NaGd(MO4)2荧光粉的制备及其光致发光

近年来稀土掺杂的上转换发光材料在太阳能电池、工业照明和医学等领域的应用越来越受到重视,目前的研究主要集中于新型高效稀土上转换发光材料的开发。对于发光材料的制备,基质的选择尤为重要,钼酸盐因具有稳定的物理化学性能、低的声子能量而从众多基质中脱颖而出。本文选择钼酸盐为稀土离子掺杂的基质材料,采用水热法制备了Tm、Yb离子掺杂的NaGd(MoO₄)₂样品。通过改变离子掺杂的浓度,探究了NaGd(MoO₄)₂荧光粉的发光特性。研究表明,在980 nm激光照射下,NaGd(MO₄)₂∶Yb³⁺/Tm³⁺在477 nm处发射蓝色荧光,在648 nm处发射红色荧光。固定Yb³⁺的掺杂摩尔分数为6%,改变Tm³⁺的掺杂摩尔分数分别为0、0.5%、1%和2%时,发现随着Tm³⁺掺杂摩尔分数的增加,477 nm处的发射峰的强度先升高后降低,当Tm³⁺     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.